Year of construction: 2013, Condition: ready for operation (used), Five KLN and Rudholzer welding and hot riveting machines are available. 1/2) KLN WNA-W, year of construction: 2012/13, power: 11kW, frequency: 25kHz, machine dimensions X/Y/Z: approx. 2700mm/2000mm/2500mm, control: Siemens Simatic S7. 3/4/5) Rudholzer hot riveting machine, year of manufacture: 2016, control system: Siemens PLC. On-site inspection is possible. Dolqw S Njugmxvoxscg

Year of construction: 2002, Condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Dcelqwsum U S Es S Nxeg

Condition: ready for operation (used), Year of construction: 2006, Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible. Deljukhz Ijqw S Nxocg

Condition: ready for operation (used), Heating output: 2000W, ultrasonic frequency: 40kHz, weight: 275kg. Delqw S Njvvu N Hexecg

Condition: ready for operation (used), Year of construction: 2008, A complete StyroDesign EPS cutting system is available. The Styrodesign EPS cutting system is ideal for precise cutting of foam materials. Equipped with modern STYRODESIGN software, it offers optimum material utilization through advanced cutting path definition and nesting techniques. Documentation available. Dolqw S Notndwxexecg

Year of construction: 2009, Condition: ready for operation (used), Clamping force: 1000kN, column distance X/Y: 420mm/420mm, mold height min./max.: 200mm/800mm, platen size X/Y: 620mm/620mm. Screw diameter D25/D35: 25mm/35mm, max. injection volume D25/D35: 90cm³/173cm³, max. injection pressure: 2500bar, injection speed: 160mm/s. Including various accessories, including D25 and D35 units. Dimensions X/Y/Z: approx. 4500mm/2200mm/1700mm, weight: approx. 5300kg, control: Arburg Selogica, operating hours: 1798h. Documentation available. Dolqw S Netthr Nsxjcg

Year of construction: 2018, Condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Djlouk I Etoqw S Nxjcg

Year of construction: 2009, Condition: ready for operation (used), There is a complete underwater pelletizing system with vibrator, heat exchanger, centrifuge, extruder, pelletizer, water basin, sieves, knife blocks, documentation and other spare parts available, a sieve changer is available separately, an inspection is possible. Djlqw Sjqxc Awe Nxscg

Year of construction: 2008, Condition: ready for operation (used), A Graewe planetary saw (inline pipe saw) is available. Max. pipe diameter: 500mm, power: 7.5kW, machine dimensions X/Y/Z: approx. 3500mm/1800mm/2000mm, weight: approx. 3200kg. Documentation available. On-site inspection is possible. Dcelqwju Ei Uae S Nxjg

Year of construction: 1990, Condition: ready for operation (used), Motor power: 80kW, insertion diameter: 70mm, screw diameter: 70mm, speed: 300rpm, heating zones: 3(7kW/7kW/5kW), dimensions X/Y: approx. 5000mm/900mm, weight: approx. 5700kg. Including 2 pairs of screws, cooling roller mill MPM, year of construction: 2020. Dcslqwjtxb Dmj S Nxeg

Year of construction: 1998, Condition: ready for operation (used), Screw diameter: 58mm, power: 30.6kW, screw speed: 280rpm, conveying capacity: approx. 120kg/h, dimensions X/Y/Z: approx. 2500mm/1500mm/1500mm. Including 2x pairs of screws and a new Brabender FW 80 metering machine. Dcjlqw S Netxb Dtoxsg

Year of construction: 1999, Condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Djlqwoilhfcs S Nxecg

Year of construction: 2019, Condition: ready for operation (used), Screw diameter: 30mm, clamping force: 50t, heating output: 11kW, weight: 2.9t, with documentation, an inspection is possible. Delsrk Rxqjqw S Nxocg

Year of construction: 2018, Condition: ready for operation (used), Cutting circle diameter: 240mm, cutting chamber opening X/Y: 465mm/330mm, rotor knives: 3 x 2, stator knives: 2, motor power: 5.5kW, throughput: approx. 100kg-160kg/h, machine dimensions X/Y/Z: approx. 1400mm/900mm/800mm. Including feed device (diameter: 96mm, width: 150mm), dancer arm extrusion, angle sensor and vector FU. Documentation available. Dolqw S Nsucw Tcexocg

Year of construction: 1999, Condition: ready for operation (used), Installation height min./max.: 250mm/750mm, opening stroke: 500mm, clamping force: 1500kN, screw diameter: 40mm, distance between tie bars: 420mm, injection volume: 182cm³, operating hours: 98234h. Documentation available. On-site inspection is possible. Delqw S Njt E Trhsxscg

Year of construction: 2002, Condition: ready for operation (used), PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible. Dcjloq Abwheqw S Nxeg

Year of construction: 2009, Condition: ready for operation (used), Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible. Dslouy T I Heqw S Nxjcg

Year of construction: 2010, Condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Dslqw Seuy T Ndo Nxjcg

Year of construction: 2009, Condition: ready for operation (used), There are 5 identical Engel injection molding machines available. Screw diameter: 2x 30mm/3x 35mm, clamping force: 80t, weight: approx. 4400kg. All machines including attachment crane. One Engel (Fig. 5) serves as a spare parts dispenser for the remaining 4 machines. Documentation available. On-site inspection is possible. Djlqwju Afz Dj S Nxscg

Year of construction: 2016, Condition: ready for operation (used), A total of 9 partly dismantled Krauss Maffei injection molding machines are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical parts. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical parts. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical parts. All injection molding machines include robots from Kuka, Krauss Maffei, Sar, or Sepro. On-site inspection is possible. Djlqweugmx Ae S Nxscg

Year of construction: 1990, Condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Dcjlqw S Nevw Aqhexeg

Year of construction: 2018, Condition: ready for operation (used), Injection unit: 1500 T-2 EUROMAP 400 without hydraulic lines. Power: 2000kN, screw diameter: 40mm, nozzle diameter: 2.5mm, effective screw length: 20mm, max. stroke volume: 201cm³, shot weight max. hp: 184g. Hours in automatic operation: 20700h, pump hours: 27800h, cycles: 3.4 million. Documentation available. On-site inspection is possible. Dcjler N Rh Heqw S Nxog

Year of construction: 2018, Condition: ready for operation (used), A Pan Stone elastomer press is available. Press force: 5000kN, working height: 950mm, plate dimensions X/Y: 800mm/800mm, installation height min./max.: 54mm/400mm, clamping plate swivel: 60°, opening path: 800mm, clear width: 870mm. Machine dimensions X/Y/Z: approx. 2800mm/1700mm/4400mm, control: B&R, operating hours: approx. 5500h. Documentation available. On-site inspection is possible. Dcjlqwsvuagho S Nxeg

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Dslqw Ssttbd Nj Nxjcg

Year of construction: 2007, Condition: ready for operation (used), Clamping force: 400kN, min. installation height: 200mm, max. drive-up distance: 500mm, barrel diameter: 15mm, max. screw volume: 17cm³, number of core pulls: 2. Dcjlqwjttbfbe S Nxsg