Used Gws 25 230 for sale (19,541)

Condition: used, Year of construction: 2007, Manufacturer: Solev (Clauger) Model: RH 550/230-25U-0-RS-SP-2G/1F Year : 2007 Type : glycol water heat controller / Thermal skid Class : ATEX - EX II 3 G - EEx b,c,d,e II B T2 Minimum / maximum temperature : +20°C / +230°C Intensity: 51 A. Heating: 25 kW immersion heater Heating control by thyristors. Cooling: No cooling system. Bwsdezg Nbhspfx Aa Isu Heat transfer fluid: Therminol 66 Regulator type 2704 single loop from EUROTHERM Centrifugal electric pump unit giving a flow rate of 26 m3/H Motor: 4 KW. ALWEILLER NBT32-160/01/149 pump Filling volume : 69 L - 246 L Documentation available Sold with protective cover.

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Bjdszmamuspfx Aa Iswu Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: new, bending length: 2600sheet thickness: 10upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel Bjdpfx Aed Ab Thsa Iewu - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 4.682,-- - metarial feeding table on request - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- We have many references!

Condition: excellent (used), For sale: SEW-EURODRIVE WF30DT63L4 geared motor with a 0.25 kW three-phase electric motor. The unit is fully functional, tested, and ready for operation. Its technical and visual condition is good. It shows normal signs of wear and tear resulting from use. The robust SEW-EURODRIVE gearbox ensures reliable operation and is ideal for conveyors, feeders, packaging machines, production lines, and other industrial applications. Technical specifications: Manufacturer: SEW-EURODRIVE Type: WF30DT63L4 Motor power: 0.25 kW Power supply: 3× 230Δ / 400Y V Motor speed: 1300 rpm Output speed: 47 rpm Torque: 33 Nm Duty cycle: S1 Current: 1.19 / 0.68 A Frequency: 50 Hz Power factor: cos φ 0.81 Protection class: IP54 Insulation class: B Design: IM B5A Weight: 10.63 kg Lubrication: synthetic oil SEW PG460 Bodpfx Aasznw Ewj Iewu Country of manufacture: Germany

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze DERA071-12 motor, 0.25 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the photos. This geared motor with a worm gear is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze Motor type: DERA071-12 Power: 0.25 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1365 rpm Output speed: 186.6 rpm Torque: 11 Nm Gear ratio: i = 7.5 Protection class: IP55 Insulation class: F Duty cycle: S1 Condition: 100% functional – tested. Bsdpfxszncq Ss Aa Iowu Normal signs of use visible on the housing. Sold exactly as shown in the photos.

Condition: new, sheet thickness: 10bending length: 2600upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered Bjdpsd Ab Sbjfx Aa Ijwu - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 8.250,-- - side supports EURO 6.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: excellent (used), Overview The Single Head Wire Stitching Machine is a versatile and reliable solution for wire stitching applications, suitable for both pads and brochures. Designed for consistent performance in print finishing environments, it offers the flexibility to handle standard and loop stitching with ease. Built with a robust and durable construction, this machine is well suited to long production runs while maintaining accuracy and stability. The adjustable working table allows quick changeover between saddle stitching for brochures and flat stitching for pads, making it ideal for varied workloads. An advanced wire feed system ensures smooth and precise stitching, even when working with thicker or digitally printed materials, providing consistent results across a wide range of stock types. Optional loop stitching conversion parts are available, allowing the machine to be adapted quickly to suit different production requirements. Key Features Supports both standard and loop stitching for pads and brochures Heavy-duty construction for reliable, long-term operation 25mm stitch and 40mm stab capacities Adjustable table for saddle or flat stitching configurations Maximum speed of up to 203 staples per minute Table size: 700 × 240 mm Patented wire feed and cutting system for accurate, consistent stitching Suitable for thicker and digitally printed materials Optional loop stitching conversion kit available for added flexibility Why Choose the Hohner Economy 25/40 Ideal for print shops requiring a flexible stitching solution for multiple applications Simple changeover between different stitching styles reduces downtime Capable of handling a wide range of materials, including heavier stocks Reliable and durable design suited to regular production use Cost-effective alternative to larger multi-head stitching systems Bedpfxjyyb Rde Aa Iswu Optional loop stitching capability adds value and expands service offering Specifications Manufacturer Hohner Model Hohner Economy 25/40 Condition Used Mechanic cycles per minute [staples] 203 Clinched staple 25mm Capacity Stabbed from both sides 40mm Capacity Stitching table size [mm] 700 x 240 Working height [mm] 880 Throat depth from clincher box to machine body [mm] for pad stitching 95 Throat depth from clincher box to machine body [mm] for saddle stitching 290 Maximum number of stitching heads 1 Crown width [mm] 14 Round wire (standard) No. 21 – 30 Flat wire 0,70 x 0,35 mm – 0,90 x 0,78 mm Electric requirement 230/400V Single or 3phase Net weight [kg] 200 Dimensions (L)900mm x (W)700mm x (H)1540mm

Condition: new, functionality: fully functional, color: black, empty load weight: 340 kg, Year of construction: 2025, Brand: Kinshofer Model: KM652-5-230 Year of manufacture: Unused, 2025 Serial number: LG14540 Bwsdpowwr Ibjfx Aa Iju Dimensions LxWxH (mm): 900 x 900 x 980 Weight (kg) approx.: 340 Quantity in stock: 1 Capacity (kg): 2000 (230 ltrs) Suitable for: Crane Max. working pressure (bar): 260 Made in: Germany Comments: Unused, CE approved with document, oil flow 25-75 ltrs/min

Condition: excellent (used), For sale: SEW-Eurodrive R40DT71K2Z gearbox with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gearbox is in good technical and visual condition. Normal signs of wear and tear from use are visible, but these do not affect its performance. Technical specifications: Manufacturer: SEW-Eurodrive Model: R40DT71K2Z Rated power: 0.25 kW Power supply: 230/400 V (Δ/Y), 3-phase Frequency: 50 Hz Bwjdszm Sq Sepfx Aa Isu Motor speed: 2500 rpm Output shaft speed: 39 rpm Rated current: 1.60 / 0.93 A Protection class: IP54 Insulation class: F Mounting method: IM B6 Weight: 16.14 kg Power factor (cos φ): 0.85 Lubrication: CLP220 Country of manufacture: Germany

Condition: excellent (used), For sale: SEW-EURODRIVE WA20/TDT63L4/B03 geared motor with a three-phase electric motor and integrated brake. The unit is used, fully functional, and ready for operation. Its visual condition is good, with normal signs of wear and tear resulting from use. It is ideally suited for driving conveyors, feeders, industrial machines, and production lines. Bwjdpoznuk Defx Aa Ieu Technical data: Manufacturer: SEW-EURODRIVE Type: WA20/TDT63L4/B03 Power: 0.25 kW Power supply: 3×230Δ / 400Y V, 50 Hz Motor speed: 1300 rpm Output speed: 33 rpm Gear ratio: i = 39.00 Output torque: 41 Nm Current: 1.20 / 0.69 A Protection class: IP54 Insulation class: B Operating mode: S1 Brake: 230 V AC, braking torque 3.2 Nm Weight: 9.6 kg Lubricant: SEW PG460 (synthetic oil)

Condition: excellent (used), Year of construction: 2016, fuel type: hybrid, color: blue, Weights Empty weight: 3.000 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.500 cm Dimensions of cargo space: 430 x 80 x 205 cm CE mark: yes Bjdpjz H Uh Refx Aa Iewu Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Max. horizontal reach: 1200 m Production country: IT Additional information Please contact Vink Machinery for more information Cela Spyder DT25 * 2016 * Diesel and 230V * 25-meter working height * 12-meter horizontal outreach * Capability for negative (below-grade) operation * Adjustable tracks * Remote control * Automatic outrigger leveling * "Coming home" function * 3,000 kg dead weight * Includes all documentation

Condition: excellent (used), For sale: a SEW-Eurodrive WA20DT63L4/B03 worm gear motor with a 0.25 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The gear motor is in good technical and visual condition. It shows normal signs of use, as visible in the photos. A power cable with a plug is included. Technical specifications: Manufacturer: SEW-Eurodrive Model: WA20DT63L4/B03 Motor power: 0.25 kW Power supply: 3× 230/400 V, 50 Hz Motor speed: 1300 rpm Output speed: 130 rpm Gear ratio: i = 10.25 Output torque: 16 Nm Protection class: IP54 Insulation class: B Operating mode: S1 Brake: 230 V AC Bedpfx Aozmy Sdea Iowu Weight: 10.55 kg Manufacturer: SEW-Eurodrive, Germany The scope of sale includes exactly what is shown in the photos.

Condition: ready for operation (used), Heidenhain UR 230 compact inverter Id.362 593-02 SN: 15161883, the item has been completely overhauled and comes with a 3-month warranty, used, in good condition, 100% functional, scope of delivery as per photos. Bwedpfx Aox Eticoa Iju

Condition: used, mileage: 1,001 km, first registration: 01/2002, color: red, driver cabin: other, gearing type: other, Year of construction: 2002, Equipment: cable winch, central locking, crane, Vehicle location: Bovenden, crane located behind the building, emergency stop, foldable, 2-point hydraulic support, wireless remote control, 5x hydraulic outriggers, winch. Superstructure: Fassi F230AXP.25 with winch & wireless remote control, formerly used by the Swiss Army! Hardly used! Bedpfslp Rpfjx Aa Iowu Load chart: 2m-9100kg, 4.55m-4175kg, 6.35m-2830kg, 8.25m-2060kg, 10.30m-1570kg, 12.35m-1210kg, 14.35m-1000kg. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: excellent (used), mileage: 30,191 km, color: white, lifting height: 30,000 mm, Year of construction: 2006, operating hours: 1,136 h, Drivetrain Drive: Wheel Weights Empty weight: 7.450 kg Functional Lifting capacity: 1.300 kg Dimensions of cargo space: 860 x 230 x 320 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Maximum lifting capacity at end of jib: 350 kg Delivery terms: EXW Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Klaas K 25-30 TS * 2006 * Diesel drive * 1136 working hours * Equipped with a man basket * Refurbished remote control * 30-meter working height Bjdpfxeyi Hdgs Aa Ijwu * 25-meter horizontal reach * 1300 kg lifting capacity * 30,191 km * 7,450 kg net weight

Condition: good (used), 1 x 90 degree conveyor belt on stainless steel stand with wheels. Technical specification: Motor manufacturer - SEW Eurodrive. Bjdpfewvg Umjx Aa Iewu Belt width - 910 mm W x 990mm H. Belt type - modular. Footprint dimensions - 2300mm x 2550mm (motor box to far side) X 965mm H. Electrical requirements - 3 ph. Video available on request.

Condition: excellent (used), For sale: Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the pictures. Thanks to its compact design and worm gear, the geared motor is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1370 rpm Output speed: 133 rpm Torque: 22.6 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Duty type: S1 Bwodpfxeznclce Aa Iju Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the pictures.

Year of construction: 2008, condition: used, load capacity: 50 kg, plate length: 2,500 mm, plate width: 1,200 mm, stack height: 1,600 mm, TECHNICAL DETAILS Maximum panel width: 1,200 mm Maximum panel length: 2,500 mm Minimum panel width: 195 mm Bsdpjz Ekcnefx Aa Ijwu Minimum panel length: 250 mm Lifting capacity: 50 kg Operating performance: 18 cycles/min Maximum stack height from the ground: 1,600 mm MACHINE DETAILS Total installed power: 15 kW CE safety compliance: Yes EQUIPMENT Removal of the panel stack via powered roller conveyor Vacuum pump WINDOWS control The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8347

Condition: not inspected (used), Year of construction: 2010, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm feed 5-25 m/min Dimensions (L/W/H) 4700/1800/1100 mm weight ca. 4.000 kg CASOLIN MEGA 230/6 four-side planer ----- 6 spindles, with touchscreen control. Width and height controlled. Spindle arrangement: 1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW Bedswmggkspfx Aa Iswu 2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with 3rd spindle: left, 40 mm diameter, 6,000 rpm 4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW 5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW 6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kW Machine without machining tools. The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system). Machine already dismantled and stored. (technical information according to the manufacturer - no guarantee!)

Condition: used, functionality: fully functional, Available quantity: 5 units “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Manufacturer: Siemens Type: SINAMICS G120D Power Module PM250D 6SL3525-0PE23-0AA1 Power: 3 kW, 3-phase, 380–500 V AC Rated current: 7.2 A, Max. 15.4 A Protection class: IP65 Bwedpfx Aajzgf I Rj Ieu Special features: Regenerative braking capability (4-quadrant operation), integrated network filter Class A Weight: approx. 8 kg including CONTROL UNIT 6SL3544-0FB20-1FA0

Condition: used, Available quantity: 6 units Removed from a production facility of an automotive supplier, professionally disassembled. Siemens POWER MODULE SINAMICS G120D PM250D 6SL3525-0PE23-0AA1 Version: FS:C02 Bedpfxezggt Ie Aa Iewu including Siemens SINAMICS G120D Control Unit CU240D 6SL3544-0FB20-1FA0 Version: B01 / V4.7

Year of construction: 2022, condition: like new (used), 1 x Ultrasonic deburring machine Ultratec A 25 Year of manufacture: 2022 Bodpfx Aajz Ig S Ds Iewu The machine has hardly been used and is in like-new condition. The machine can be inspected while running in its current operating environment.

Condition: new, bore capacity in steel (diameter) 25 mm throat 170 mm bore stroke 50 mm 16 mm spindle taper MK 3 spindle turning speed range 50 - 3000 U/min 280 mm 155 mm table surface area 500 x 180 mm connected load frequency 230 V max. distance between table and spindle-nose max. 320 mm Bwjdpfx Aasvdldws Ieu total power requirement 0,8 kW weight of the machine ca. 150 Kg dimensions of the machine ca. 670 x 550 x 910 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content

Condition: new, For sale: Original KSB RIO50-40D circulation pump, brand new, in its original packaging. The pump is intended for heating and cooling installations, as well as for applications in building technology and industry. ⸻ Technical Data • Manufacturer: KSB • Model / Type: RIO50-40D • ID Number: 29 132 136 • Power supply: 230V, 3~ 400 V / 50 Hz • Number of speeds: 3 • Power consumption (P1): 180 / 240 / 330 W • Nominal diameter: DN50 • Connection: flanged • Operating pressure: PN6 / PN10 • Max. medium temperature: 130°C • Protection class: IP44 • Insulation class: H • Weight: approx. 14.1 kg • Manufactured in: EU Bjdpfxeyhhmge Aa Iowu ⸻ Condition • New, unused • Original KSB packaging • Manufacturer's manual included • Condition exactly as shown in the pictures ⸻ Applications • Central heating systems • Heating and cooling circuits • Industrial and commercial facilities

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. Fiber laser cutting machine FLV-6025-C2 30kW Specifications - Maximum sheet size: 6000x2500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum acceleration: 1.5G - Maximum load: 3840kg - Nominal power: 30.0kW - Energy requirements: 156.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Bsdpfsthh Uvex Aa Iewu Price-included 2-day training with machine installation - 1st day (up to 8 hours) – machine commissioning and controller usage training - 2nd day (up to 8 hours) – work under the guidance of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package