Extruder

Bandera 17kW/32kW/49kW

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Nwodpot D E Aijfx Ad Nob Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): Nwjdpew Dp Ufjfx Ad Neb At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: refurbished (used), Year of construction: 2014, load capacity: 180 kg, arm reach: 2,900 mm, We at Binici MB GmbH also have other industrial robots in-house. Njdowxxzwepfx Ad Nswb All our robots are fully functional (with complete accessories). We are at your disposal for good advice

Condition: good (used), Drying oven for uv line Nsdpfx Adst Ag Uqe Nswb

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: Njdoh A Sfdjpfx Ad Newb 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: ready for operation (used), Jaw Crusher Kleemann Njdpfeu S Tqvsx Ad Njwb Brand: Kleemann Type: SSTR 1250 Feed Opening: 1250 x 950 mm Incl.: E-motor Weight appr. 38 Tons

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) Nedpfx Aoqwycljd Nswb X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available Nedpfx Aoiyx Uzod Newb

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Nodpfx Adod N Rb Do Nswb Very good condition. Available immediately.

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. Nsdpfxotvpilo Ad Njwb We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). We also have a number of single point welding machines for steel wires.