Used plasma cutting machines for sale (127)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 11139737, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, empty load weight: 1,950 kg, The machine will be available starting mid-September! TECHNICAL DETAILS Working area: 6,000 × 2,000 mm Working length: 6,000 mm Working width: 2,000 mm Max. sheet thickness: 30 mm Travel range X-axis: 6,000 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 150 mm MACHINE DETAILS Ndodpfx Aqszv N Hpswoa Plasma source: Kjellberg HiFocus 161 neo Cooling type: Water Voltage: 3 × 400 V Power: 9 kW Frequency: 50 Hz Number of phases: 3 Net weight: 1,950 kg EQUIPMENT Dust extraction system: Donaldson Torit DCE

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Nsdszizkyopfx Aqweda Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: - CNC Controller - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our HUGE Advantage): - FREE Loading: Professional and safe loading included! - Transport Assistance: We assist in organizing fast and cost-effective transport in Europe. - Video of the machine in operation available upon request; on-site testing welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Zustand: WIE NEU (Nur 238 Betriebsstunden, ca. 1 Monat Nutzung). Verfügbarkeit: Sofort verfügbar. Wir bieten eine erstklassige CNC-Plasmaschneidanlage Swift-Cut PRO 2500 MK5 (UK, 2022). Perfekter technischer und optischer Zustand, sofort einsatzbereit. Mit hocheffizienter Hypertherm Powermax 105 und Wassertisch ausgestattet. Wichtigste technische Daten: - Schneidbereich (L x B): 2500 x 1250 mm - Z-Achsen-Freiraum: 120 mm - Plasmaquelle: HYPERTHERM Powermax 105 - Tischart: Wassertisch Inklusive Software: - CNC-Steuerung - 2D-Design: Solid Edge 2D - Nesting: SigmaNEST Companion Nedpjztu Aqofx Aqweda Erweiterte Funktionen & Ausstattung: - Soft Sense (IHS): Genaue Einstech- und Schnitthöhe - DTHC: Dynamische Spannungskorrektur während des Schneidens - XYZ Torch Protection: Fortschrittlicher Kollisionsschutz (Magnetischer Kopf) - Laserpointer zur einfachen Positionierung - Präzise Linearschienen und Planetengetriebe Transport & Logistik (Unser GROSSER Vorteil): - KOSTENLOSER Ladevorgang: Fachgerechtes Verladen im Preis inbegriffen! - Transportunterstützung: Wir helfen bei der Organisation des Transports in Europa - Ein Video im Betrieb ist auf Anfrage erhältlich, Vor-Ort-Test möglich

Condition: good (used), Year of construction: 2019, functionality: fully functional, Brand: Grotius Control system: Linux CNC Working area: 3000 x 1500mm Length (mm): 4020mm Width (mm): 2330mm Nsdpfxszupvus Aqwsda Height (mm): 1570mm Description: Includes Thermal Dynamics A40i plasma source & various wear parts.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 350 h, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis Hypertherm HPR130XD plasma cutting machine was manufactured in 2013. It features a power output of 130A with a 100% duty cycle, and operates at a voltage input of 400V. The included TEKA air extraction unit has a volumetric flow rate of 7500 m³/h and a motor power of 7.5 kW. If you are looking to get high-quality plasma cutting capabilities, consider the Hypertherm HPR130XD machine we have for sale. Contact us for further details. Ndodpozvxq Refx Aqwja - Plasma System Power Output: 5A/82V - 130A/132V (100% Duty Cycle at 130A, 150V)- Plasma System Voltage Input (U1): 400V, 3-Phase, 50/60 Hz- Plasma System Input Current (I1max): 32A- Plasma System Power Rating (S1): 22kVA- Plasma System Open Circuit Voltage (U0): 311V- Air Extraction Unit Model: Filtercube 4H- Air Extraction Year of Manufacture: 04/2013- Air Extraction Volumetric Flow Rate: 7500 m³/h- Air Extraction Max Static Pressure: 3950 Pa- Air Extraction Motor Power: 7.5 kW- Air Extraction Nominal Current: 15.5 A- Air Extraction Supply Voltage: 400V (3PH+N+PE), 50Hz- Air Extraction Control Voltage: 230V- Air Extraction Mass/Weight: 380 kg- Air Extraction Protection Class: IP54- Control / Electrical Cabinet Drives: ECOVARIO / KOCH components (Y1-Drive, X-Drive, XX-Drive, Z-Drive) Additional Equipment: Gas bottle setup with regulators, status indicator light tower

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Original new price: 450,000 euros. Nsdszdz U Uopfx Aqweda

Condition: used, Year of construction: 2015, Swift Cut 3000 W/T Plasma Cutting Machine, 3000mm x 1500mm Cuttting Bed, Hypertherm Powermax 125 Power Source. S/No. 4500318 (2015). Country of Origin: United Kingdom Ndsdpfozn Uuiox Aqwoa Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Type: COMBIREX DX 3500 Ndodpfx Aezc Hn Eeqwoa Machine No.: 21214714 Year of Manufacture: 2012 If you have any questions or require further information, please contact us by email or phone.

Condition: used, Year of construction: 2016, operating hours: 2,170 h, functionality: fully functional, input voltage: 400 V, total width: 3,880 mm, total length: 3,100 mm, input current: 160 A, Equipment: documentation/manual, MGM Omnicut Star 3100 CNC plasma cutting system Manufacturer: MGM Model: Omnicut Star 3100 Year of manufacture: 2016 Operating hours: approx. 2,100 h For sale is a well-maintained MGM Omnicut Star 3100 CNC plasma cutting system from 2016 with only approximately 2,100 operating hours. The machine is in good technical condition and is ready for immediate use. Equipment: CNC plasma cutting system MGM Omnicut Star 3100 Year of manufacture 2016 Approx. 2,100 operating hours Ndedpfx Aozpwcfeqwoa Plasma source: Kjellberg HiFocus 161i neo Additional oxy-fuel torch for economical oxy-fuel cutting Precise machining of steel, stainless steel and aluminum Robust machine construction for industrial use The combination of the powerful Kjellberg HiFocus 161i neo and the oxy-fuel torch enables both highly precise plasma cuts and the economical cutting of larger material thicknesses. Note regarding the sale: We offer this machine on behalf of a client and act solely as an intermediary. The sale is made directly by the machine's owner. We will gladly facilitate contact and assist you with the entire process. An inspection of the machine is possible at any time by prior appointment. We will gladly provide further technical data, images and information on the equipment upon request. We look forward to your inquiry.

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: PR4-3000-05190216, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, input voltage: 400 V, cutting current: 105 A, input current: 28 A, input frequency: 60 Hz, electrical fuse: 50 A, open-circuit voltage: 292 V, Swift-Cut Pro 3000 CNC Plasma Cutting System Complete new and unused CNC plasma cutting system from Swift-Cut Automation, manufactured in 2019. The machine has never been used and is equipped with a Hypertherm Powermax105 plasma power source and an ECO 4 HC/S dust extraction unit with a spark trap. The dust extraction system is suitable for plasma cutting applications, including aluminum cutting. Nedpfjzvch Tex Aqwsda Main specifications: Manufacturer: Swift-Cut Automation Model: Pro 3000 Year of manufacture: 2019 Condition: New, never used Serial number: PR4-3000-05190216 Cutting area: 3000 × 1500 mm Plasma power source: Hypertherm Powermax105 Plasma cutting current: 30–105 A Power source: 380/400 V, 3-phase, 50–60 Hz Power source P/N: 059412 Dust collector: ECO 4 HC/S Dust collector motor: 5.5 kW Dust collector power supply: 400 V / 50 Hz Dust collector application: Plasma cutting up to 120 A Additional equipment: Spark trap / spark separator The Hypertherm Powermax105 provides high-performance plasma cutting for a wide range of conductive materials. The actual cutting capacity depends on the material type, thickness, and cutting conditions. The ECO 4 HC/S dust extraction unit is designed for plasma cutting applications and is equipped with an additional spark trap. Its configuration also allows aluminum to be cut safely with suitable operating conditions. Please note: The system is offered without a compressor. A suitable source of clean, dry, and oil-free compressed air is required for the operation of the Hypertherm Powermax105.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC oxy-fuel cutting machine in very good condition, lightly used. Ndodszhby Sspfx Aqwea

Condition: excellent (used), Year of construction: 2019, operating hours: 630 h, functionality: fully functional, Becky Job Master 6.20P CNC plasma cutting system Nedpfezpf Uvex Aqweda Year of manufacture: 2019 Power source: Hypertherm XPR170 Machine software included, nesting software excluded Donaldson dust extraction system, 5.5 kW Excluding disassembly and delivery The machine is being sold due to the purchase of a laser cutting system. Location: Vorarlberg

Condition: ready for operation (used), Year of construction: 2020, overall weight: 1,080 kg, total width: 1,960 mm, total height: 1,500 mm, table length: 3,020 mm, table width: 1,520 mm, travel distance X-axis: 3,020 mm, product length (max.): 3,560 mm, table load: 400 kg, number of axes: 2, Plasma cutting machine manufactured in 2020. This PLASMACUT 3015T features a cutting area of 3,020 × 1,520 mm and a maximum plate thickness of 50 mm. It includes a robust gantry drive system and operates with a Hypertherm Powermax 105 Sync plasma power source. If you are looking to get high-quality plasma cutting capabilities, consider the PLASMACUT 3015T machine we have for sale. Contact us for further details regarding this machine. • Cutting Area: 3,020 × 1,520 mm • Operating Voltage: 230 V • Phase: 1 Ph • Power Consumption: 300 VA • Maximum Table Load: 400 kg • Maximum Plate Thickness: 50 mm • X-Axis Guide System: Hardened Precision Round Steel Guides with Adjustable Rollers • Y-Axis Guide System: Profile Rail Guides • X-Axis Drive: Reinforced Timing Belt (5M15) • Y-Axis Drive: Reinforced Timing Belt (2 × 8MR30) • Gantry Drive: Dual-Sided Drive with Rigid Coupling Shaft • Positioning Speed: 24 m/min • Repeatability: Better than 0.1 mm • Control Software: CNC-Workbench Plasma • CAD/CAM Software: CNC-Workbench Plasma • File Format Support: DXF Nedpfezrnwxjx Aqwsda • Plasma Power Source: Hypertherm Powermax 105 Sync • Plasma Power Source Voltage: 400 V • Maximum Cutting Current: 105 A • Piercing Capacity: 22 mm • Maximum Severance Capacity: 44 mm • Duty Cycle at Full Load: 80% • Process Gases: Air, Nitrogen • Manual Torch Connection: Optional • Water Tank Capacity: Approx. 300 L • Exhaust Connection Preparation: DN 150 mm • Portal Clearance: 300 mm • Laser Pointer: Yes • Torch Height Control (THC): Automatic Arc Voltage Control • Operating System Requirement: Windows XP / 7 / 8.1 (PC Not Included) Additional Equipment • Water Tank • Rittal Operator Panel • PC with Installed Control Software • Hand Control Unit • Operating Manual • Serial Connection Cable • Consumables Kit • Hypertherm Powermax 105 Sync Plasma Power Source • Automatic Nesting Module (License for One PC) • Laser Alignment • Scribing Option • Fume Extraction Bridge Preparation (DN 150 mm) • Portal Height Extension to 300 mm Clearance

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 260 A, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: double-sided, We offer this used Ajan PP15088 AUTO plasma cutting machine, year of construction 2015. Working area: 2000 x 6000 mm Machine type: PP15088 AUTO Construction year: 2015 Input voltage: 380 V Phases: 3 Frequency: 50 Hz Njdoy Annbspfx Aqweda If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2016, MicroStep Master Cut Eco Plus Ndedpfx Aezpf U Neqwea CNC plasma cutting system with nesting software Year of manufacture: 2016 Power source: Kjellberg HiFocus 161i Provision for retrofitting an oxy-fuel torch including Kemper filter system Maximum working area: 3000x1500mm Machine location: Hall in Tirol Immediately available

Condition: like new (used), Year of construction: 2018, operating hours: 700 h, functionality: fully functional, type of input current: AC, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, overall weight: 5,000 kg, workpiece weight (max.): 4,000 kg, cutting current: 200 A, KOIKE Gammatec 2040 – CNC Plasma Cutting Machine for Sale 📌 Manufacturer / Model: KOIKE Gammatec 2040 📆 Year of manufacture: 2019 📍 Location: Finland 💪 Powerful and precise CNC plasma cutting solution The KOIKE Gammatec 2040 is a heavy-duty industrial CNC plasma cutting machine, designed for high accuracy and reliable production. It is an excellent choice for metal workshops, fabrication companies, and industrial manufacturing environments. 📊 Technical specifications 📏 Cutting area (X × Y): 4,000 × 2,000 mm 🔪 Maximum cutting thickness: up to 60 mm 🌀 Number of torches: 1 🧠 Control system: CNC ⚡ Plasma system: Kjellberg HiFocus 🔌 Power requirement: approx. 2 kVA 📦 Machine dimensions: approx. 5,000 × 2,400 × 1,000 mm ⚖️ Machine weight: approx. 4,000 kg 📈 Key advantages ✅ Large cutting table (4 m × 2 m) – ideal for large metal sheets Nodpfx Ajygk Sijqwsda ✅ CNC-controlled precision for industrial production ✅ Proven KOIKE quality and robust machine design ✅ Suitable for continuous workshop or factory use 🛠 Condition 🔹 Used – very good condition The machine can be inspected and tested prior to purchase. Power source: Smart Focus 200 Mains voltage: 3 × 400 V, 60 Hz Cutting current: 35 – 200 A Marking current: 10 – 50 A Cutting range: Maximum: 60 mm Recommended: 1 – 10 mm Piercing: Maximum: 32 mm Plasma gases: O₂, Ar / H₂, N₂, Air Piercing gases: Ar, N₂ Dimensions (L × W × H): 1030 × 680 × 1450 mm Mass: 388 kg Plasma machine torch: PerCut 4000 Quick change head: PerCut 4000

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Nodpfx Aqev I U Hcswoda Sold without cutting table.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points Ndodpsy Snwnjfx Aqwoa - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel • Celeron 733 industrial CPU, 20 GB industrial HDD • Standard keyboard and PS/2 mouse • Cutting system/features: • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: Njdpfxjzhbf Us Aqweda • 2x RS-232, 2x USB 2.0, LAN • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) • Spare parts, consumables and starter kit

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Equipment / Options Ndodpfxjyx Svbe Aqwsa • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.

Condition: good (used), Year of construction: 2013, Used plasma cutting machine from Haco Type: Compact 3015 Table dimensions: 3000 x 1500 mm Ndjdsznun Nopfx Aqwja Hypertherm HPR 130 amp power source Includes spare parts

Condition: used, Year of construction: 2010, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 50 mm, sheet thickness aluminum (max.): 35 mm, overall weight: 4,000 kg, working width: 2,000 mm, travel distance X-axis: 6,000 mm, type of cooling: air, Equipment: documentation/manual, Used MicroStep flame cutting machine (plasma system) SPL 6001.20 P with Kjellberg torch. Used, fully functional. Extraction system included. Video demonstrating the machine in operation is available; please contact us if you are interested or have any questions. Nodszr D Hpepfx Aqweda Price negotiable.

Condition: good (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, working range: 3,000 mm, sheet thickness (max.): 40 mm, The information was found successfully. Here is the updated listing with added cutting parameters: Teknohaus Thermcut 3000D – CNC Plasma Cutting Machine For sale: a well-maintained Finnish-made CNC plasma cutting machine. The machine has been used in production and operates flawlessly. Technical specifications: Manufacturer: Suomen Teknohaus Oy Model: Thermcut 3000D Year of manufacture: 2007 Serial number: 320011 Nedpeywlh Uofx Aqwoda Supply voltage: 3 × 400 V Plasma source: Hypertherm HyPerformance HPR130 (130 A) Controller: Thermcut / Teknohaus CNC controller with touchscreen USB interface for program transfer Cutting capacity (mild steel): - High-quality, virtually dross-free cut: 16 mm - Production piercing: 25 mm - Maximum cutting thickness (edge start): 38 mm Features: - Large cutting table (approx. 3000 mm wide) - Two plasma channels (Plasma 1 & Plasma 2) - Water table for spark and fume management - Ideal for cutting steel, stainless steel, and aluminium Machine viewings available by appointment; the machine can be seen in full working order. 📞 For further information, please call.

Condition: used, Year of construction: 1995, functionality: fully functional, BANCO DI TAGLIO AL PLASMA usato SOITAB da mt.4x2, CON GENERATORE HYPERTHERM MAX 200, revisionato e con CNC nuovo. SP. MAX 40mm IN FE Ndedpfx Aqezh Dg Iowea SP. MAX 20mm IN INOX Viene fornito tutto revisionato con controllo CNC nuovo ed installato dal cliente con corso di formazione all’uso, tempi 30/40gg per ultimare il lavoro,prezzo chiavi in mano finito compreso di filtro usatto ma escluse le predisposizioni elettriche ed il camino fumi dal filtro al al tetto.

Condition: ready for operation (used), Year of construction: 2020, total height: 2,500 mm, number of axes: 4, This 4-axis Baykal BPS-3006 was manufactured in 2020, featuring a CNC Plasma Cutting Machine with a cutting table size of 3000 × 6000 mm. It includes a rotary axis for tube and pipe cutting and is equipped with a Hypertherm HPR 130XD plasma source. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS-3006 machine we have for sale. Contact us for more information about this machine. Additional equipment • Dust & Fume Extraction System: • Air Flow: 12000 m³/h Ndsdpszbcmusfx Aqwja • Filter Area: 171 m² Machine Benefits Technical Machine Benefits • Cutting table size: 3000 × 6000 mm • Tubes cutting capability: yes • Control system: texnos pc 12 or hypertherm microedge pro • Software: hypertherm cam / cnc with arcglide thc height control • True hole technology: supported with hprxd system – enables high-quality hole cutting up to 12 mm thickness. Extra Information Machine still under power Dimensions Machine Depth 8100 mm