Track width: 2100 mm
Working width: 1500 mm
Working length: 3000 mm
Total width: 2650 mm
CNC control Omnicom Explorer
Color LCD display
Zxckxn9x
1 plasma burner suspension
pneumatic moving roll scanning
Option: Conversion to electric arc scanning possible plasma source of Hifocus 100, burner head Percut 100
incl. Lantek software expert 2000
Extraction system as good as new.
The plant is built in our factory demonstration ready
Cortina DS 3100, working range: 8,000 x 2,000 mm, built in Dec. 2004
CNC controlled cutting machine with sturdy bridge suspension, interlocking longitudinal drives and precise machined leadership profiles, supply voltage: 400 V 50 Hz, TN-S Network (§ / PE/N)
Track width: 3100 mm
Working width: 2000 mm
Dead length: 1500 mm
Total width: 3525 mm
Operating side: left
Power supply: right
Hkcqaup28
Fuel: Propane
Including:
OmniCom Explorer C drive 15 m / min DC
Carrier for double-sided longitudinal d...
cutting circuit: 15 - 40 A
electrical connection: 230 V, 16 A kW
Nf0lh
space needed: 470 x 250 x 250 mm
weight: 10 kg
CNC Portal Plasma Cutting Machine
Manufacturer: Microstep
Type: SPL-P 9001.25
Year of manufacture: 2007
CNC-Control
working range: 2500 x 9000 mm
1 plasma torch with power source Kjellberg HiFocus 280i
Bxdvywldjx
without filter
MICROSTEP CNC Plasma Cutting Machine
Type:PL 4501.20
Year:2000
Control:MSNC500
Torch:HT2000LHF
Working range: 4500 x 2000
Machine weight ca.:6500kg
Pvthwm
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, sinc...
Mastercut Eco Plus 3001.15
Working area : 3000mm x 1500mm
1 x Plasma Kjellberg 161i with automatic gas console
Contour Cut
Filter system : Eco 75 Teka 4H 7,5 KW
Bl0crqoa
Spark separator: Teka FVS 8000
Description see PDF.
under power.
Commissioning on request
On offer is a used, fully functional flame cutting system / plasma cutting machine from Zinser, including gas console and extraction system / dust extraction system.
Data:
Zinser 2705 CNC 500
Control CNC 500
year of construction 1998
Voltage 230V
Bxbagfgsgs
input power 3000W
cutting table 3000x1500mm
track length 5000mm
Flame cutting up to 80mm
Plasma cutting up to 15mm
scribing function
1 autogenous welding head
Hypertherm HD 3070 with gas console
Dust extraction system Zinser / Donaldson Torit...
AVAILABLE FROM STOCK :
Geka plasma cutting machine GCS P-4020
table size 4000 x 2000mm
incl. plasma source Hypertherm 125A
incl. GProCUT 2D cutting software
- GEKA CNC cutting table
- Hypertherm Powermax 125A
- cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm
- CNC control with GproCUT 2D CAD cutting software
- Nesting included.
- Country of manufacture Spain incl. CE conformity.
Pfrwj
- Heavy duty base for increased support and rigidity.
- CNC Tex computer control with touch ...
Technické údaje:
-otočná hlava pro 3D pálení pod úhlem
-řezání černých a nerezových ocelí
do tl. 50 mm
-pracovní plocha stolu
2000 mm x 6000 mm
-řezání trubek v průměrech
od 30 mm do 700
Ojxll
-tvarové řezání do trubek a uzavřených profilů
-vřeteno s vrtací hlavou pro řezání závitů a vrtání otvorů
Čas provozu 600 hodin.
CNC Portal Plasma Cutting Machine
E3asgfd
Manufacturer: ESAB
Type: SXE-P1 3000
Year of manufacture: 2009
CNC control: Vision 55
working area: 1,5 x 6,0 m
3 oxyfuel torches
1 plasma torch with power source Kjellberg HiFocus 360i
cutting thickness: approx. 50 mm piercing
Suction table: Dodek
..
Cutting range 1500x3000 mm. Red. Hiwin crossbeam-deal-axis rails
Available with plasma source of 160 ampere / 125 ampere / 100 ampere / 60 ampere / 40 ampere
Machine can cut up to 8000 mm per minute
Power connection is 230 volts for the control and 3x400 volts for the plasma cutter
Machine is equipped with automatic height control. This can be adjusted by means of a current frequency controller.
The machine itself has 45 pre-programmed drawings that you can adjust to size.
Besides that you...
CNC Portal Plasma Cutting Machine
Manufacturer: ESAB,Eagle 2500
Year of manufacture: 2004,Control: Vision
DNC connection, track width: 2.500 mm
track length: 5 m, working area: 2 x 3 m
suction table: 1,5 x 3m ( Kemper )
Ucnj7wl
1 plasma torch with power source Kjellberg HiFocus 160i
automatic gas console
various wear parts, as well as an additional plasma exchange head.
filter system Kemper 8000 (5.000 m³/h, 5,5KW)
cutting software: Columbus
to be seen under power
Plasma-gas cutting machine ECKERT JANTAR 2 was produced in 2007.
Technical parameters:
– CNC control: ECS 859
– table: 9 sections, 1.62 m long each
– table width: 3.2 m
– table length: 14.58 m
– number of slides: 3
– possibility of communication with a computer
– possibility of plasma and gas cutting
Bvcn7h9iub
– 2 Harris gas burners
– plasma cutting thickness: 8-10 mm
– gas cutting thickness: up to 90 mm
– power supply: 230 V
– rated current: 12 A
– plasma aggregate: PA-S45W
There is only for air plasma cutting method. It is light, easy assembling profile cutting machines with high level of accurassy. Integrated cutting table is included on the cost of machine. An effective exhaust of the combustion products protects health of cutting machine operators. Main features: 1) Position accuracy-up to +0,15mm 2) ARC Voltage torch height control with ohmic contact 3) Cutting widths from 1000mm up to 1500mm 4) Cutting length from 2000mm up 3000mm 5) Cruising speeds of up to ...
Plasma cutting systems
cutting width 1.500 mm
cutting length 3.000 mm
table height 600 mm
in contrast to the Plasma-Jet TrueCut series, the Plasma-Jet Compact systems have a guide frame which is connected to the table via the base plate, so that it can be transported as a whole and requires only a minimal footprint
in the case of the small plasma sources (e.g. Powermax), these are also housed in a rack compartment
the equipment consists of the same high-quality components: bridge driven from bot...
CNC Portal Plasma Cutting Machine
Manufacturer: ESAB
Type: Eagle 2000
Year of manufacture: 2007
0kwz7mgv
Control: Vision 52
working area: 1500 x 3000 mm
1 plasma torch with power source Kjellberg HiFocus 160i
Hole piercing up to 25 mm
suction: Dodek
CNC - plasma cutting machine / flame cutting machine
Bib9cge00s
offer number: 07043
Make: KNIFE
Type: EUROCUT
Machine No: 17702390
Year of construction: 1990
Technical data:
- Travel : X 3000 mm
- Y 1500 mm
- max. cutting capacity ST 37 25 mm
- max. travel speed 0 - m/min
- Screen control MESSER KS 20 A
- Plasma cutting power source CEOBORA
- Air connection 4 bar
- Power consumption 400 V / kVa
- Space requirement approx. W 2400 x H 1400 x D 5000 mm
- Weight approx. 2500 kg
Year of manufacture 2002
Total length : 7500 mm
width table+shaft : 2000 mm
Length table : 6000 mm
width over all : 3600 mm
CNC MSC 500
1 x Plasma Hypertherm HD 4070
Pedcn
1 x autogenous
to be seen under power
Plasma cutter ECKERT JANTAR 2 produced in 2007. The machine is regularly serviced. She worked on one shift.
Technical data :
- CNC computer controller: ECS 859
L2gn3nqm
- plasma source: POWERMAX 1650
- size of the working table: 2000 x 6000 mm
- plasma cutting thickness: 12 mm
- oxygen cutting thickness: 60 mm
- power supply: 230 V
- rated current: 12 V
This budget cutting machine is created for both method of cutting as a plasma so as a oxy cutting up to 150 mm thickness of material. The high level of reliability with low cost make this machine absolutely competitive in ratio price-quality. Width of cutting-1.5-2.0 . Length of cutting 30-12m. Quantity of tools (supports for torches)-1(oxy+plasma). Max thickness of material for cutting by plasma-50. Max thickness material of cutting by Oxy- 120. Max cutting current of plasma (A)- 200. Type of C...
Plasma cutting systems
cutting width 1.550 mm
cutting length 3.050 mm
table height 600 mm
compact design with integrated guides in the table frame
plasma cutting system for individual use with a high benefit-cost ratio
by a specific selection of the used components it is achieved that the cutting functionality is available like in the big plasma cutting machines
machine can be moved and transported in fully assembled condition
the drive of the machine bridge on both sides and the drive of the X-...
CNC Portal Plasma Cutting Machine + Autogenous
Manufacturer: Messer
Type: Omnimat L 5600
Year of manufacture: 1999
CNC control: Omnicom
track width: 5.600 mm
track length: 25 m
working area: 4 x 22 m
Bfkcsoktzn
1 plasma torch with power source Hypertherm HD3070
2 oxyfuel torches
1 powder marker
without table
without filter
...
PLA-65A PLASMA CUTTER
The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for
manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine
CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter
industry.
Technical data:
Hypertherm Powermax plasma source
Power: 65A
Max power consumption 11 kw
Speed m / m...
Bach Thermocut
working area: 1500mm x 3000mm
1 x Plasma Kjellberg 160i with automatic gas console
D8qymnpr
IHT 3000, arc dependent height control
without filter system
at call
Commissioning on request
Technical parameters
Operating parameters: XY working range (working area) 1520 x 3100 mm
Working range of Z240 mm axis
Table top clearance 240 mm
Xe0noxxz
Maximum height of the profile to be cut 220 mm
Idle speed (The cutting speed depends on the plasma unit power and the material thickness to be cut) 25000 mm/minute.
Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200 plasma sources.
Design parameters:
Length 3650 mm
Width 2280 mm
Height 1500 mm
Total weight 1100...
This is a SAF plasma cutting system from 1997 with 2 cutting heads.
The second head is coupled via a rope and thus cuts the same parts.
The machine cuts perfectly and is in good condition.
The programs can be written on the machine or on the PC, the transfer then takes place via a serial interface using a DNC program.
We sell the machine because it is too big for us and is hardly used (about 3 hours per week).
It is set up and can be tested during the tour
Cutting area 10000mm x 3000mm
Cuttin...
Plasma cutting systems
cutting width 1.550 mm
cutting length 3.050 mm
table height 600 mm
compact design with integrated guides in the table frame
plasma cutting system for individual use with a high benefit-cost ratio
by a specific selection of the used components it is achieved that the cutting functionality is available like in the big plasma cutting machines
machine can be moved and transported in fully assembled condition
the drive of the machine bridge on both sides and the drive of the X-...
CNC portal plasma cutting machine
Manufacturer: Microstep
Type: CombiCut AB 6001.25+S880
Year of manufacture: 2011
Cx2v7uhk
CNC-control
working range: 2.500 x 6.000 mm
shaft 800 mm for tube processing
1 plasma torch with power source Hypertherm HPR260XD
1 oxyfuel torch gas type acetylene
1 drilling spindle up to 30 mm and thread M20
with 6-fold tool changer
1 pipe cutting device RSV500 for diameter 30 to 500 mm
Filter unit TEKA ZPF6H with spark separator
.....
Working Length: 2000mm X 6000mm
Equipment: 1 x plasma High Definition 200A & 2 x Oxy Fuel Torches
Brq3rxraaq
Others: Offline ESAB Software, fume extraction below overall cutting bed.
It is a MicroStep CNC guiding machine
SPL-P3001.15 , pipe cutting device RSV 300
Fw2qh8v
with a plasma source HiFocus160i with automatic gas console from Kjellberg. ( Cutting data see PDF )
Cutting ranges:
Sheet thicknesses from 0,5mm to 40mm in the range of mild steel.
Sheet thicknesses from 1mm to 35mm, in the range of aluminium and stainless steel.
The plasma cutting machine type SPL is a numerically controlled machine designed for material cutting by plasma jet cutting.
The machine is functi...
Technical parameters
Operating parameters:
XY working range (working area) 2020 x 4100 mm
Working range of Z240 mm axis
Table top clearance 240 mm
Maximum height of the profile to be cut 220 mm
Idle speed (The cutting speed depends on the plasma unit power and the material thickness to be cut) 25000 mm/minute.
Oymwd
Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200 plasma sources
Design parameters:
Length 4650 mm
Width 2780 mm
Height 1500 mm
Total weight 1900.0 k...
CNC Portal Plasma Cutting Machine
Manufacturer: Microstep
Type: CombiCut 3001.15
Year of manufacture: 2000
CNC control
1 plasma torch with power source OTC D-12000
(new installed in 2018)
Bhqfmnbtpb
cutting thickness up to 20 mm
1 oxyfuel torch Harris
extraction table: 1.600x3.100 mm
Filter system Kemper System 8000
incl. SparkTrap spark pre-separator
.....
CNC plasma and flame cutting machine
Bach Multicut 4000
suction table: 2000mm x 3000mm
(extendable)
Bly0mufvqn
1 x Plasma , 100 i Kjellberg with manual gas console
(cutting data see PDF)
IHT 3000, distance control
1 x autogenous support
Control system: MyBach
including extraction ( filter system )
Commissioning on request
Technical parameters
Operating parameters:
XY working range (working area) 2020 x 6100 mm
Working range of Z240 mm axis
Table top clearance 240 mm
Maximum height of the profile to be cut 220 mm
Idle speed (The cutting speed depends on the plasma unit power and the material thickness to be cut) 25000 mm/minute.
Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200 plasma sources.
Design parameters:
Length 6750 mm
Width 2780 mm
Xeirigf7
Height 1500 mm
Total weight 2600...
CNC Portal Plasma Cutting Machine
Manufacturer: Bach
Type: Thermocut 1500
Year of manufacture: 2011
CNC control: myBach
working range: 1.500 x 3.000 mm
cutting range: 1 - 50 mm
C0pjgwx
grooving: 35 mm
Pipe cutting device up to diameter 300 mm
1 plasma torch with power source Kjellberg HiFocus 280i
with automatic gas console
Extraction table
Filter system
cutting software BlechCenter Plus
Availability: End of August 2021
Bach ACK 2D
Working range : 1500mm x 3000mm
E3a9dh2
Control : NBS 300
1 x Plasma Hifocus 100 ( cutting data see PDF )
inclusive CAD CAM Software, Fan 12.000 m³/h
little used, to be inspected under power.
Technical parameters
Operating parameters:
XY working range (working area) 1010 x 2020 mm
Working range of axis Z160 mm
The clearance between the table surface and the beam 140 mm
Maximum height of the profile to be cut 120 mm
Idle speed (The cutting speed depends on the plasma unit power and the material thickness to be cut) 25000 mm/minute.
Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200 plasma sources.
Enedlvr
Design parameters:
Length 2650 mm
Width 1780 mm
...
CNC Portal Plasma Cutting Machine
Dxcdli
Manufacturer: Messer
Type: Multitherm Eco
Year of manufacture: 2011
CNC control: Global Control S
1 plasma torch with power source Kjellberg HiFocus 161i
grooving up to 30 mm
Cutting up to 50 mm
working area: 1.5 x 3 m
Extraction table
Filter system
Cutting software Omniwin 2011
..
CNC plasma cutting machine
1 x Plasma Nertajet HP 300
cutting: Stainless steel 30-35mm
New cooler in 2019
Working range: 2500mm-6000mm
Oxltv
Control D 510 plus
Burny 10 LCD plus
without water table
Technical parameters
Operating parameters:
XY working range (working area) 2520 x 3100 mm
Working range of Z240 mm axis
Table top clearance 240 mm
Maximum height of the profile to be cut 220 mm
Idle speed (The cutting speed depends on the plasma unit power and the material thickness to be cut) 25000 mm/minute.
Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200 plasma sources.
Design parameters:
Length 3650 mm
Width 3280 mm
Height 1500 mm
Total weight 1900.0 kg
Max...
CNC Plasma Cutting Machine
Manufacturer: Microstep
Type: EuroCut-P 6001.15
Year of manufacture: 2007
CNC control
1 x plasma with power source Hypertherm powermax 1000
cutting thickness: 10 mm thin sheet
working area: 1.500 x 6.000 mm
Filter system: Donaldson DFPRO 6 Cyclo
Ddmqcj7
.
CNC plasma and oxyfuel cutting machine
Year of manufacture 2000
cutting portal OXYTOME 20
working area 2425 mm x 3000mm
Plasma installation HP 300 CPM 250
Power consumption 85 kVA
cutting current 30-300 A
cutting process:
Oxygen dry: Mild steel 1,5-25 mm
Aluminium 1,5-25 mm
Brq3gdtetj
Water Vortex Underwater: Stainless Steel 1.5-30 mm
Aluminium 1,5-40 mm
Argon/hydrogen dry: stainless steel 8-70 mm
Oxysaf Mach 3S oxyacetylene torch
incl. power source, cooling unit for plasma torch, ...
Technical parameters
Operating parameters:
XY working range (working area) 2020 x 6100 mm
Working range of Z240 mm axis
Table top clearance 240 mm
Maximum height of the profile to be cut 220 mm
Idle speed (The cutting speed depends on the plasma unit power and the material thickness to be cut) 25000 mm/minute.
Compatible with Hypertherm Powermax 45-125 plasma sources and Hypertherm MAXPRO200 plasma sources.
Design parameters:
Length 6750 mm
Width 2780 mm
Height 1500 mm
Total weight 2700.0 kg
Max...
CNC Portal Plasma Cutting Machine
Manufacturer: ESAB
Type: Suprarex SXE-P1 4500
Year of manufacture: 2003
CNC control
working range: 3.000 x 12.000 mm
track width: 4.500 mm
Uobcjks
1 plasma torch with power source Kjellberg HiFocus 160i
Hole piercing up to 30 mm
suction table Dodek
CNC plasma flame cutting machine ESAB
Size working area
8500x2500
Number of torches
3 x oxyfuel (up to 200 mm)
1 x plasma (Hypertherm HPR260 since 2016)
Operating data:
Cutting capacity mild steel
Bare* 32 mm
Piercing (production) 38 mm
Maximum cutting capacity 64 mm
Cutting capacity alloy steel
Piercing (production) 32 mm
Maximum cutting performance 50 mm
Cutting capacity aluminium
Piercing (production) 25 mm
Maximum cutting capacity 50 mm
With Nesting Software
This plasma source was built in 2...
Technical specifications
Operating parameters:
XY working range (working field) 2520 x 6100 mm
Z axis working range240 mm
Clearance between table surface and beam240 mm
Maximum height of cut profile220 mm
Idle speed
Cyntcc0g
(Cutting speed depends on the power of plasma unit and the thickness of material being cut.) 45000 mm/min.
Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources.
Construction parameters:
Length 6750 mm
Width 3280 mm
Height 1500 mm
Total weight27...
CNC Portal Plasma Cutting Machine
Manufacturer: ESAB
Type: Suprarex SXE-P1 4500
Year of manufacture: 2007
Got0dkwj
CNC control
working range: 3.000 x 12.000 mm
track width: 4.500 mm
1 plasma torch with power source Kjellberg HiFocus 360i
Hole piercing up to 40 mm
suction table Dodek
Satronik FB 3000 year 2001
Total length 6,0 m
working length 4,00 m
1 x Kjellberg Hi Focus 100 (cutting data see PDF)
Suction firing table 2100mm x 4200mm
Euromate filter system SCS
Fan 11,000 cbm/h 7,5 KW
Complete gas hoses replaced in 2015
Lantek Expert CAD CAM software included
C0mfhtui
Technical specifications
Operating parameters:
XY working range (working field)1520 x 3100 mm
Z axis working range240 mm
Clearance between table surface and beam240 mm
Maximum height of cut profile220 mm
Idle speed
(Cutting speed depends on the power of plasma unit and the thickness of material being cut.) 25000 mm/min.
Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources.
Construction parameters:
Length 3650 mm
Eqlnpci8g
Width 2280 mm
Height 1500 mm
Total weight 1...
Plasma cutting system / power source
Manufacturer: Kjellberg
Gva2mc
Type: PA-S75 CNC
Year of manufacture: 1994
Cutting current: 40 - 130 A
Quality cut: 35 mm
Separating cut: 45 mm
Gas console: PV-S75W-1
without hose package
.....
Used Cnc plasma cutting systems
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
Photo gallery: the 10 strongest forklift trucks in the world
Sell now on Machineseeker! Over 220,000 inquiries per month
Photo gallery: The World's 10 biggest excavators
Olympic Games: Machineseeker sponsors Team Germany
Sample sales contract for used machines in nine languages
