Used Cutting System for sale (49,991)

Condition: used, Year of construction: 2018, operating hours: 6,955 h, machine/vehicle number: M542 8DC D01, repeat accuracy: 0.02 mm, working length: 4,000 mm, working width: 2,000 mm, Work area 4m x 2m, traverse speed 17.8 m/min, linear axis accuracy ±0.0127 mm, repeatability ±0.02 mm, Z-axis travel 305 mm, 610 mm, acceleration 0.1 g, circle accuracy ±0.0635 mm, pump pressure 3,800 bar, mobile operator station, touchscreen, LED lighting for status indication, software FlowXpert (integrated 2D/3D CAD/CAM software), pure water cutting, conventional abrasive waterjet cutting, height sensor Dynamic Contour Follower, splash guard, laser edge finder, TECHNICAL DETAILS Work area X-axis: 4,000 mm Work area Y-axis: 2,000 mm Material support area: approx. 4,100 x 2,100 mm Z-axis travel: 305 mm / 610 mm Programmable Z-axis travel: approx. 305 mm Traverse speed: 17.8 m/min Linear axis accuracy: ±0.0127 mm Repeatability accuracy: ±0.02 mm Acceleration: 0.1 g Circle accuracy: ±0.0635 mm Cutting speed increase through DWJ technology: up to 4x MACHINE DETAILS Waterjet system Pump pressure: 3,800 bar Cutting angle through beam compensation: 90° Table load capacity: approx. 2,441 kg/m² Operating hours: 6,955 h EQUIPMENT Mobile operator station Touchscreen LED status display FlowXpert software with integrated 2D/3D CAD/CAM function Pure water cutting system Conventional abrasive waterjet cutting system Secondary Z-axis for pure waterjet Programmable, servo-driven Z-axis Dynamic Contour Follower – automatic height sensing PASER 4 Dynamic Waterjet (DWJ) cutting head technology Automatic compensation of natural beam bending Splash guard Laser edge finder Abrasive desliming system Stainless steel beam catcher Continuously adjustable water level regulation for quiet underwater cutting Gusds Ahgrtepfx Alcoi Clamping and tensioning system Distributed drive system with covered ball screws Two-part steel table construction Vibration-damping separation of tank and guide system Abrasive desliming system, stainless steel beam catcher, water level regulation, clamping and tensioning system, secondary Z-axis pure waterjet, standard abrasive waterjet, programmable Z-axis, Z-axis (height adjustment): approx. 305 mm (programmable, servo-driven), water level control: fully adjustable for underwater cutting (low noise), drive: distributed drive system with covered ball screws, cutting head technology: PASER 4 Dynamic Waterjet (DWJ), compensates for natural beam bending, for precise 90° cuts at high speed (up to 4x faster), table load: high load capacity (approx. 500 kg/sq ft), table construction: two-part steel construction, separation of tank and guide system for vibration damping, material support area: approx. 4,100 mm x 2,100 mm.

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Gsdpfe Ah Rl Uox Alcsui Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & Weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL INFORMATION Manufacturer: Eisele Type: LMS III-D Machine number: 3.028 Year of manufacture: 1975 Machine type: Metal circular saw ELECTRICAL DATA Operating voltage: 220–380 V DRIVE Guede Aduyhspfx Alcji Speed: up to 2,800 rpm TOOL Grinding wheel diameter: 250 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 700 mm Width: 500 mm Height: 1,000 mm Weight: 150 kg

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Gusdpfxo Aa Np No Alcei TECHNICAL DETAILS General Information Machine Type: 3D Coordinate Measuring Machine Machine Weight: approx. 2 t Travel Ranges X-axis travel: 1,600 mm Y-axis travel: 1,000 mm Z-axis travel: 1,300 mm Working Areas Working area Y-axis: 175–1,210 mm Working area Z-axis: 0–810 mm Baseplate Size of baseplate: 1,500 × 800 × 120 mm Digital Display Digital display: Grundig 3-axis Digimess Dimensions of digital display: 235 × 80 × 130 mm Performance Data Total power consumption: 0.04 kW Dimensions Space requirement: approx. 2.0 × 1.5 × 1.63 m EQUIPMENT Finely scraped cast plate with 4 adjustable feet, 2,000 × 1,500 mm Approx. 20 different probing and measuring styli Stiefelmayer guide system “A”

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, grinding width: 1,300 mm, overall weight: 5,500 kg, working height: 880 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gedpfx Ae Ah Rxcslcoui Sanding width: 1,300 mm Working height: 880 mm Workpiece thickness: min. 3 mm Workpiece thickness: max. 140 mm Sanding system: CSD Drive power: 3.0 kW Feed rate: 4.5–22 m/min Brush roller unit Brush roller diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Height adjustment: central Cross sanding unit Sanding belt length: 4,900 mm Sanding belt width: 150 mm Sanding belt speed: 12 / 24 m/s Drive power: 13 / 17 kW Longitudinal sanding unit Sanding belt length: 2,620 mm Sanding belt width: 1,350 mm Sanding belt speed: 0.3–12 m/s Drive power: 11 kW Sanding belt running direction: counter-rotating MACHINE DETAILS Distance between idler rollers: 40 mm Sanding system: CSD Operator terminal: graphic Dimensions & Weight Dimensions (L x W x H): approx. 2,550 x 2,675 x 2,400 mm Weight: approx. 5,500 kg EQUIPMENT Cross and longitudinal sanding units for sanding veneer and other materials before coating CSD sanding system Conveyor bed with individual conveyor belts Refurbished conveyor belt Adjustable feed rate Dust extraction system Brush roller unit with central height adjustment Wear-free braking systems Pneumatic sanding belt tensioning Belt running monitoring Pressure pad belt system Intermittent belt extraction systems Stepless electronic sanding belt speed control via frequency converter Infrared belt control, graphic operator terminal for entering machine settings Numerical thickness adjustment Fault source indicator Workpiece throughput indicator Feed rate indicator Electronically controlled pressure bar for free, multi-track infeed Automatic adjustment of the pressure bar contact surfaces to the workpiece shape

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Working area combined punching/laser: 3,000 × 1,500 mm Working area punching operation: 3,000 × 1,500 mm Working area laser operation: 3,000 × 1,500 mm Max. sheet thickness mild steel: max. 8 mm Max. sheet thickness stainless steel: max. 8 mm Max. sheet thickness aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching rate with E = 1 mm: max. 900/min Max. marking rate: max. approx. 2,800/min Guede Ahhi Uepfx Alcoi Max. number of multi-tools with 3 tool holders: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneous: max. 108 m/min EQUIPMENT SheetMaster ToolMaster GripMaster Working area without repositioning in large format Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet disposal on lifting table

Year of construction: 2021, condition: used, machine/vehicle number: 21.067.372, Submitting a bid obligates you to collect the item on time, no later than December 23, 2026! Godps Agvrrofx Alcjui MACHINE DETAILS Total meter reading according to display: 1,376,504 (as of 2024) EQUIPMENT Computer terminal Note: Accessories are provided without warranty. The principle applies: "Item purchased as is." The prospective buyer must verify the completeness of the item on-site.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2011, operating hours: 27,693 h, laser power: 3,000 W, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,000 W Round tube diameter: min. 16 mm Round tube diameter: max. 225 mm Square tube dimensions: max. 160 × 160 mm Rectangular tube dimensions: max. 200 × 100 mm Guodpfj Air Hyjx Alcji MACHINE DETAILS Loading and unloading Loading length: 6,500 mm Unloading length: 6,500 mm Operating hours: 27,693 h EQUIPMENT Automatic rear loading Automatic unloading system Fiber laser technology Specialized software solutions

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: Berg und Schmid Model: PERFECT 275 Machine number: 55.025 ELECTRICAL DATA Guodpfx Aj Adzkyjlcoi Operating voltage: 380 V Frequency: 50 Hz SAWING DATA Speed: 1,425 RPM Saw blade diameter: 275 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 900 mm Width: 600 mm Height: 1,600 mm Weight: 200 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Data Manufacturer: Minor Type: 3/67 Machine Type: Metal Circular Saw Electrical Data Guedo Adzivopfx Alcei Operating Voltage: 380 V Frequency: 50 Hz Saw Unit Saw Blade Diameter: approx. 200 mm MACHINE DETAILS Dimensions Length: 1,000 mm Width: 700 mm Height: 1,600 mm Weight Weight: 200 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 20,000 h, laser source model: ROFIN DC 020, laser power: 2,000 W, working length: 6,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gjdpfxo Air Ide Alcsui Processing length: min. 3,200 mm Processing length: max. 6,500 mm Round tube diameter: min. 12 mm Round tube diameter: max. 120 mm Square tube dimensions: min. 12 × 12 mm Square tube dimensions: max. 100 × 100 mm Rectangular and oval tube dimensions: min. 10 × 12 mm Rectangular and oval tube dimensions: max. 120 × 70 mm Laser power: max. 2 kW MACHINE DETAILS Loading and unloading Loading length: 6,500 mm Unloading length: 4,500 mm Load capacity of the bundle loader: 4,000 kg Number of digitally controlled axes: 6 Laser source: ROFIN DC 020 Operating hours: 20,000 h EQUIPMENT Automatic bundle loading system Unloading system ROFIN DC 020 laser source Cooling unit (chiller) Extraction system LT120 Optical weld seam tracking system LT120 Integrated micro-dosing system

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Saw blade diameter: 400 mm MACHINE DETAILS Manufacturer: Trennjäger Type: ST351 Machine number: GK170 Machine type: Metal circular saw Guedpfe Aduxqox Alcoi Length: 1,000 mm Width: 800 mm Height: 1,600 mm Weight: 200 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Gedpo Adu Aisfx Alceui SAW UNIT Saw blade diameter: 300 mm CONVEYOR Conveyor width: 490 mm MACHINE DETAILS MACHINE DIMENSIONS Length: 1,300 mm Width: 1,200 mm Height: 2,000 mm Weight: 400 kg EQUIPMENT Conveyor

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 200711, compressed air connection: 6 bar, type of input current: AC, Equipment: documentation/manual, Bührs (W+D) BB700 16K inserting system with Müller Apparatebau cut-sheet front end, built 2008. Currently in daily production at our site in Barnstaple, North Devon, UK. Viewing under power available by appointment. MACHINE DETAILS - Model: Bührs BB 700 16K, serial no. 200711, built 2008 - Speed: up to 16,000 mailpieces per hour (single page) - Total mailpieces: 25,932,497 (September 2026). Individual feeder counts available on request. - Feeders: 8 insert stations (7 x RF2 rotary, plus RF2K friction feeder on station 8) and envelope feeder - Envelope sizes: C4, C5 and DL - Integrity: Lake Image Systems camera reading system (v02.06.27) with 4 cameras fitted for full matching: one on the Müller front end, two on insert stations and one on the envelope station. Capacity for up to 8 cameras. Lake camera PC runs Windows XP; standalone operation recommended. - Software: W+D BSC 3.0 (03_03_24_00), Inserter 03_02_63_00, Bührs IBC controller 2.4.2.0 - Delivery conveyor included - Power: 400/230 V three-phase + N + PE, 50 Hz, 11.4 kVA total load, 25 A max fuse (BB700 plate rated 5 kW) - Compressed air: 6 bar filtered, 945 Nl/min MÜLLER FRONT END (model / serial) Gedpfxoz Iy Tno Alcsui - Cut sheet feeder: 6687c / 54787 - Transport unit: 6995c / 57255 - Spacer: 6975c / 57230 - Accumulator C4: 6999c / 61322 - Accumulator C5: 6895c / 55307 - Folders: 6826c / 58116 and 6822c / 57630 - Exit transports: 6989c / 57997 and 6815c / 58037 CURRENT CONFIGURATION The line has been modified from the original OEM layout (original June 2011 W+D drawing included in the pictures for reference only): - One RF2 feeder station added (original: 6 x RF2 + 1 x RF2K) - Müller front end reconfigured with folders and a C5 accumulator added - Turnover belt section, MT100 mailtable, distance module and eject gate removed. Output leg now approx. 3.5 m (originally 7.5 m). - Power and air figures are taken from the original drawing, which included the removed modules, so actual demand is likely to be lower. Please confirm as-installed dimensions on site before planning installation or transport. SERVICE AND MAINTENANCE - Annual service by BW Converting, most recently August 2026, including a rebuild of the crossover section - Accumulator EPROM upgrade fitted January 2026 - Maintained in-house by our own engineering team, with daily safety checks and weekly, monthly and quarterly PMs against documented checklists - Full CMMS maintenance history available from August 2024 - All manuals available, in physical and digital copies REMOVAL Collection only. The buyer is responsible for decommissioning, removal and transport. We do not arrange decommissioning or delivery.

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Guedpfsx H Ny Tox Alcji

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 100, input voltage: 400 V, track width: 660 mm, type of input current: three-phase, power: 0.4 kW (0.54 HP), input frequency: 50 Hz, electrical fuse: 16 A, Product distributor with 8 outlets and cutting system for kebab strips For sale: complete stand-alone product distributor/splitter with 8 outlets, designed for the even distribution, extrusion, and cutting of kebab strips or similar meat products. The unit is sold as a stand-alone machine, complete with a support frame, pneumatic cutting system, and product conveyor belt. A vacuum filler or other dosing machine is not included. Technical specifications: Product distributor with 8 outlets Splitter model: 160/76/8/DN32 Separate eccentric impeller pump system per outlet Rotors interconnected via a central drive shaft Main housing and impellers made of stainless steel Rotors and rings made of wear-resistant technical polymer Standard product connection: DN65, length approximately 500 mm Outlets equipped with DN32 swivel couplings Outlets at an angle of approximately 30° Shape and dimensions of the extrusion outlets depend on the existing design Includes tools for disassembling the rotors Mobile stainless steel frame Stainless steel C-frame Gsdpfx Aozqc U Nslcjui Suitable for positioning above a conveyor belt or packaging machine Mobile on wheels Height adjustable by approximately ±30 mm Robust and hygienic design for use in the food industry Pneumatic cutting system Cutting system for all 8 outlets Pneumatically driven cutting mechanism Mounted on the front of the outlet manifold Stainless steel cutting blade Equipped with a safety guard Includes a safety microswitch Cutting cycle can be synchronized with an external vacuum filler or dosing machine Product conveyor belt Stainless steel construction Variable belt speed Length: approximately 1,000 mm Working height: approximately 900 mm ±50 mm Width adjusted to the 8 product outlets Includes an electrical and pneumatic switch cabinet Equipped with a safety guard and safety switches Suitable for: Kebab strips Meat strips Ground meat and meat products Production across 8 uniform lanes Automatic loading onto a conveyor belt or packaging line

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, The SMAG E-CUT S 330 is now for sale – a robust, versatile, and highly productive label finishing system designed for digital and conventional printing lines seeking flexibility, precision, and high-value-added finishes. This equipment is ideal as a complement to digital presses, allowing for lamination, die-cutting, slitting, and rewinding in a single workflow. -> General Data – CONVERTER: - Model: E-CUT S 330 - Year of manufacture: August 2012 - First installation: February 2013 - Maximum web width: 330 mm - Maximum unwind coil diameter: 700 mm - Maximum speed: up to 35 m/min -> Configuration and units: - Unwinder with ultrasonic web guide - Fully rotating flexographic station - Lamination unit - Semi-rotary die-cutting unit with Z 160 magnetic cylinder Gedpfx Aj Ahw Azslcsui - K&B GapMaster for precise adjustments - Corona treatment for improved adhesion - Slitting unit with up to 10 blades - 2 rewinders - Waste matrix rewinder -> UV System: - In 2017, an air-cooled UV-LED lamp from Phoseon was installed, improving energy efficiency and reducing maintenance. -> Key strengths - High productivity and industrial reliability - Great versatility for digital and flexo jobs - Precise and stable die-cutting - Prepared for a wide range of materials - Ideal for short and medium runs with quick changeovers -> Equipment condition - Machine in good working order, well-maintained, and operational. - Available for viewing and testing without obligation. Reason for sale: Reorganization / change in production strategy.

Condition: used, Scanlab PowerScanII 50i Aperture 50 mm Angle encoder, galvanometer scanner, analog position detector Optics, wavelength ranges (standard): 9400 nm, 10600 nm Max. laser power: 2500 W @ 9400 nm, 10600 nm Typical deflection angle: ±0.35 rad (optical) Dynamics, number of installed tunings: 1 Typical tuning: Fast-Vector-Tuning Settling time: < 0.45 ms Positioning speed (f = 160 mm): 20 rad/s Step response (100% full scale) 1% full scale: 1.0 ms 10% full scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position resolution (max.)*: 18 bits for XY, 16 bits for Z * Non-linearity: < 2.1 mrad / 44° 8-hour drift (after 30 min) Offset: < 50 µrad Guodpfjzikcfex Alcoi Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner Digital controller card Control interface (alternatives): digital SL2-100 Extended diagnostics: yes (iDRIVE) Supply voltage (48±2) V DC, max. 10 A each (20 A peak current) Mechanical Scan axes: 3-axis system with integrated varioSCAN Housing versions: scan head Connector positions: relative to beam exit Weight without lens (standard housing): 35 kg Size (L x W x H) (standard housing) (433 x 268 x 266) mm³ (with varioSCAN) Beam offset: 72.72 mm Other features Water cooling: yes Air cooling: yes Other specifications Operating temperature: 25 °C ± 10 °C Deviation of deflection angle: < 5 mrad Deviation from zero position: < 5 mrad Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Shipping & Collection: Secure shipping on a pallet (by arrangement) or collection on site is possible. We will be happy to answer any further questions you may have by telephone.

Year of construction: 2010, condition: used, Offered is a CNC oxy-fuel cutting system with gantry design. Track width: 5500mm, maximum travel speed: 24000mm/min, fuel gas: propane, control: ESAB VISION T5, renewed in 2022, two A5/200 oxy-fuel tool carriages, COOL-JET BIE 220 cutting torches, automatic height control, manual torch angle adjustment, travelling operator console, laser-based plate position detection, torch carriage extraction hood, transverse extraction duct, extraction fan, emergency-stop pull wires at the front and rear. Inspection possible by arrangement. Gusdpe Ai T Aaofx Alcji

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Guedpfsz Nyv Tsx Alcsi Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Acceleration (X/Y axes) 6G Repeatability 0.001 mm Positioning accuracy 0.002 mm Max workpiece weight 900 kg Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Gjdpfx Aoy Nwtyjlcoui Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Condition: excellent (used), functionality: fully functional, pressing force: 160 t, table width: 1,600 mm, table height: 2,000 mm, Equipment: documentation/manual, KAEV Hydraulic Cutting System Available Complete KAEV hydraulic cutting system, originally used for die cutting acoustic composites and laminated automotive parts. 1. Hydraulic beam cutting press Four-column press with double-balanced yoke, self-lubricating bushings, column covers and two hydraulic cylinders integrated into the frame. The two-stage hydraulic pump provides fast approach and a slower, high-power cutting stroke. Hydraulic unit capacity: up to 300 litres; oil included. Features include automatic die-finding to set the lowest cutting point and infinitely adjustable return stroke. The control cabinet has a touch-screen panel and OMRON PLC, with scope for extensions and additional equipment. Standard software includes error indication, modem for internet connection, setup/manual/automatic modes and German/English interface. Protective covers and safety photocells are fitted. Technical data: • Cutting force: 160 t / 1,600 kN • Table/beam: 2,000 × 1,600 mm • Table height: approx. 950 mm • Daylight: 200 mm • Adjustable stroke: 15–180 mm • Stroke speed: 51 mm/s • Pump motor: 22 kW or 18 kW • Max. cutting oil pressure: 314 bar • Weight: approx. 16,000 kg 2. Pneumatic clamping beam feeder Rear-mounted feeder with one travelling beam pair for feeding material under the press and one pair for pulling and holding material. Feeding is driven by toothed belts and a frequency-controlled geared motor. The servo-driven pulling beams hold material securely and can reposition it backwards to a programmed position. PLC-controlled electro-pneumatic cabinet. Feed length is set at the touch-screen panel. Material is supported by a belt; the feeding area by a steel plate. Technical data: • Clamping width: 2,000 mm • Max. feed length: 1,600 mm • Beam opening: 60 mm • Beam speed: up to 800 mm/s, adjustable Guedpfx Aez E S Ilelcoi • Feed accuracy: ±1 mm • Pull-off force: 200 kp 3. Cutting pad shuttle unit The cutting pad moves in sync with material feeding to the front of the press, allowing convenient removal of cut parts. A linear drive and frequency-controlled geared motor move the shuttle frame. An automatic pad-shifting system connected to the cutting block changes the cutting position within a defined area, reducing repeated cuts in the same spot and extending pad life. A horizontal safety light curtain (approx. 1,200 mm) stops movement if the operator enters the shuttle area.

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Gusdpfx Aszzrutelcsi Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: used, Year of construction: 2010, We offer this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original replacement controllers for this model year are often no longer available, this upgrade provides long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 hp / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & Equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables up to 50% faster cuts compared to standard systems. Scope of delivery: • Waterjet cutting system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal incl. software • Technical acceptance report / service report from 01/2026 Location & Inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from September 15, 2026. Sales & Legal notes: The sale is exclusively in the B2B sector (commercial sale) with the exclusion of any liability for defects, guarantee and warranty ("sold as is"). Returns, exchanges and renegotiations are excluded. All information, data and descriptions are provided to the best of our knowledge and belief, but without guarantee of completeness, accuracy and topicality. The buyer is required to check the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are the sole responsibility of the buyer and at his expense. If you have any questions or require further information, please feel free to send us a message or call us. Waterjet cutter, Waterjet cutting machine, Découpe jet d'eau, Taglio a getto d'acqua, Wycinarka wodna, Rezanie vodným lúčom, 5-axis waterjet, Dynamic XD, Flow HyperJet, 4000x2000, Large format cutting system. Gusdpfxjzwpfhe Alcei

Condition: good (used), Year of construction: 1992, fully automatic programmable capping with additional line detection for defect capping via LUT system infeed belt 6 m 6 ejection stations total length 12 m The infeed belt is not running at the moment, probably because of the frequency converter. Gsdpfx Aljl H E Taecjui