Used Cr Electronic Plasma for sale (51,056)

Condition: used, Year of construction: 2000, total width: 2,000 mm, total length: 6,500 mm, total height: 2,000 mm, Empty weight: 2.500 kg Price: On request Steel/stainless steel/aluminum plasma capacity up to 12 mm. Hypertherm Powermax 1100, Harris Autogenous propane 3-200 mm. CR-electronic cutting/nesting software. - Year: 2000 - Documentation available: No - CE marking present: Yes - Serial number: OXY031200 - Control: CNC - Travel X: 4000mm - Travel Y: 2000mm - Resonator type: Hypertherm Powermax 1100 - Max. sheet thickness: 12mm - Transport dimensions: 6500mm x 2000mm x 2000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Fgedpfx Adoxrzl As Nei VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3B-S4-SRM50 Fgsdpfxjwkqmio Ad Nei -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Condition: used, Year of construction: 2004, machine/vehicle number: P020504, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delem, controller model: DA-66W, bending force (max.): 130 t, working width: 3,150 mm, stroke length: 350 mm, throat depth: 500 mm, distance between stands: 2,600 mm, installation height: 550 mm, operating speed: 10 mm/s, reverse speed: 115 mm/s, number of axes: 6, table height: 950 mm, type of crowning: CNC-controlled, oil tank capacity: 160 l, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, back gauge travel distance R-axis: 160 mm, overall weight: 13,500 kg, total length: 2,300 mm, total width: 4,000 mm, total height: 3,100 mm, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, lower tooling, safety light barrier, upper tooling, Offered Machine: Used CNC Hydraulic Press Brake Manufacturer: CR Electronic Model: GOLD 130/31 Year of manufacture: 2004 Control: Delem DA-66W (8-axis capable) Condition: used, fully functional (Z-axes currently out of service, see below) Technical Specifications: - Press force: 1,300 kN (130 t) - Bending length: 3,100 mm - Distance between uprights: 2,600 mm - CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically out of service – new servo drives required. Manual movement possible.) - Stroke: 350 mm - Installation height: 550 mm - Throat depth: 500 mm - Backgauge (X): 600 mm Fsdpfx Adow A Rgge Negi - Table height: 950 mm - Working speed: 10 mm/s - Return speed: 115 mm/s - Motor power: 11 kW - Operating pressure: 275 bar - Weight: approx. 13,500 kg Equipment & Features: - CNC-controlled hydraulic crowning - System tool holders top & bottom - Manual quick clamping of upper tools - Laser optical finger guard (safety light curtain) - PLC-supported diagnostic system - 2 support arms with quick adjustment - Operating manuals available - CE compliant Including accessories: - Fully equipped tool cabinet - Upper tool 88°, full machine length - Upper tool 35°, full machine length - Round bending upper tool - V8 T-die, full machine length - V12 T-die, full machine length - Flattening die, approx. 2,000 mm length Condition / Remarks: - Machine is in well-maintained condition, currently connected - Inspection and test run under power possible on site - Z1/Z2 currently not operational – new servo drives required - Machine is being replaced due to a planned modernization involving the acquisition of a new press brake. Price: €26,500 net (plus VAT) Negotiable for quick and straightforward purchase.

Condition: new, Year of construction: 2025, functionality: fully functional, working range: 1,030 mm, Unwind coils capacity 3000KG length 1030 mm. maximum thickness alu 1.2 mm. maximum thickness galvanized 0.8 mm. Fsdpfx Aov Stfrsd Negi stainless steel 0.6 mm. straightening haul 5 shafts punching 5 units longitudinal edging cutting rolling touch-screen control automatic adjustment of bending roller hourly production 150 tubes diameter 100.

Condition: used, Year of construction: 2023, CNC Gantry Plasma Cutting Machine with Rotator Manufacturer: Microstep Model: MasterCut 6001.30PtkG Year of manufacture: 2023 CNC control system Working area: 3,000 x 6,000 mm 1 plasma torch with Kjellberg Q3000 power source 1 oxy-fuel torch GCE FIT+ three (cutting gas: acetylene) Burning table with sectional extraction 6,000 x 3,000 mm 'Plasma Rotator MasterCut' with fully automated support ACTG automatic calibration unit for the beveling system Kemper Extraction System 8000 (year 10/2015) Asper Basic 2D programming software + Asper BevelCut bevel cutting programming Other technical specifications: MicroStep machine control with MMI console and 24" touchscreen iMSNC module expert system iMSNC module for automatic calibration of mechanical sensing iMSNC module assistant for loading CNC programs LCD control unit on the gantry Laser pointer with automatic offset transfer USB 3.0 connectivity for storage devices MicroStep RemoteDiagnostics remote maintenance module Grate cover for cutting table Reinforced design of cutting table Interface for fine plasma source to CNC control Control for automatic gas console Electrical and mechanical torch sensing LED signal tower on the gantry bridge (2 colors) Tactile shutdown device for guide rails Light barrier safety (collision protection) on the gantry bridge with emergency stop Fjdpfexu U Ddox Ad Nsgi Smart Z Movement ACTG calibration report Fully automatic oxy-fuel support Automatic gas console for oxy-fuel torch (cutting gas: acetylene) Active collision protection 71125

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 01, type of input current: three-phase, sheet thickness (max.): 70 mm, sheet thickness steel (max.): 70 mm, input voltage: 400 V, total width: 3,069 mm, total height: 3,200 mm, total length: 5,700 mm, track width: 2,150 mm, table height: 867 mm, table length: 4,250 mm, working width: 2,000 mm, compressed air connection: 12 bar, positioning speed: 40 m/min, working length: 4,000 mm, space requirement length: 7,700 mm, input current: 400 A, space requirement height: 3,200 mm, space requirement width: 4,300 mm, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 289 mm, year of last overhaul: 2024, MicroStep CNC cutting system from the MasterCut Compact series with the following features: - 2D plasma support with Kjellberg HiFocus 280i neo plasma power source - High-performance Donaldson DFPRO 8 Cyclopeel filtration system Machine designation: MasterCut Compact 4001.20P Working area: 4000 x 2000 mm Permissible sheet thickness: up to 100 mm Guides/drives: high-quality linear guides and backlash-free drive on both sides Axis control: digital, maintenance-free AC servos with IRC Positioning speed: up to 40,000 mm/min Measuring system: IRC 2500 (incremental encoder) LCD control unit Fgjdpfx Ajxuh A Hsd Noi Laser pointer for automatic offset transfer Automatic height control Dust extraction unit suitable for indoor installation Machine is as new and fully operational, can be inspected at any time! Collection ex works, unpacked.

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Application Types Fgjdpfoxuaywox Ad Nsi Cutting

Condition: excellent (used), Year of construction: 2008, Microstep plasma cutting machine cutting format 2000x6000MM power source Hypertherm 260 AMP year 2008 with nesting program Fgjdpst Uz Upjfx Ad Noi on computer at the machine, incl. extraction and filter, many new wear parts

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 403/05, table length: 3,000 mm, power of the servo motor: 1,500 W, table width: 1,500 mm, Equipment: double-sided, With plasma cutting system HyperTherm Powermax 1100 and air dryer M.T.A. DE009 Fjdpfxow I D Iae Ad Nogi The machine was used in the production of ventilation ducts and fittings. Includes special programs for controlling the machine and for manufacturing details of ventilation products: AsperWin (base software for operating the CNC machine in Windows; import of DXF files supported) Asper Nesting (enables efficient creation of nests with a large number of various cut parts for optimal material utilization and minimal waste) and Air Select (for ductwork manufacturers, enables fast and convenient design of HVAC components).

Condition: used, Year of construction: 2018, operating hours: 16,700 h, functionality: fully functional, We are selling our plasma cutter from MicroStep. If you are interested in the machine, we would be happy to provide you with detailed specifications. Below is the scope of supply as per our original order confirmation: 1. The MasterCut Compact Series | Guide Machine Technical Data: Machine designation: MasterCut Compact 3001.15Prk Machine number: 2534 Cable drag chain side: left Working area: 3,000 x 1,500 mm Fodpfx Adew I Sunj Nogi Permissible sheet thickness: robust design for materials up to 100 mm thick Guides/Drives: high-quality linear guides with backlash-free dual drive Axis control: digital, maintenance-free AC servos with IRC Positioning speed: up to 40,000 mm/min Measuring system: IRC 2500 (incremental encoder) MicroStep® CNC control system iMSNC with integrated network card One LCD control unit on the gantry Laser pointer with automatic offset transfer iMSNC® Module | Expert system iMSNC® Module | CNC program loading assistant - Page 2 of 3 - iMSNC® Module | Automatic mechanical probing calibration "THC" module | Automatic height control via arc voltage 2. Cutting table with zoned fume extraction | 3,000 x 1,500 mm 3. Grid cover for cutting table | 3,000 x 1,500 mm 4. USB 3.0 interface for storage device 5. MicroStep RemoteDiagnostics® remote maintenance module 6. Fully automatic torch support 7. HiFocus 161i neo plasma source from KJELLBERG with automatic gas console and Contour Cut Speed technology 8. Module for automatic gas console control HiFocus 161i neo 9. CNC interface for HiFocus 161i neo | Integration into CNC system 10. TEKA Eco75 filtration system - 7.5 kW with control unit 11. TEKA pre-separator TK-FVS 7000 - 12000 12. Remote control for the filtration system 13. Second hard drive with mirrored data (RAID system) 14. "MasterCut" plasma rotator with fully automatic support 15. ACTG® - Automatic calibration unit for the beveling system 16. ACTG® Calibration Report 17. "AsperWin Basic" CAM software for programming (single-user license) 18. "AsperWin BevelCut" module for bevel cutting (single-user license)

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Fsdpfx Adju U Hm Ae Njgi Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel torches for propane Beuting oscillating conveyor table Donaldson DFPRO12 filter unit for outdoor installation

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: AC, sheet thickness (max.): 200 mm, overall weight: 7,500 kg, input voltage: 400 V, cutting speed: 300 mm/min, cutting height (max.): 230 mm, table length: 13,975 mm, working width: 2,000 mm, table width: 2,200 mm, positioning accuracy: 0.5 mm, working length: 12,000 mm, 1 plasma & 1 gas (natural) torches 200 Amps Hypertherm HD4070 plasma source 1 owner throughout all service life Good condition, still in operation Fgsdjwltwaspfx Ad Nsi Set of technical documentation (users + maintenance manuals) Filter unit GTV included Nesting program Asper license + PC included Assistance in dismantling, packing, loading (to be negotiated separately) Organizing of transportation to countries of the European Union (at separate quotation)

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 4100 mm Measurements depth 10169 mm Machine weight 5500 kg Control Unit Brand MicroStep Fgodpfx Aoxllm Djd Noi Model IMSNC Main Drive Number of axis 3 This 3-axis MicroStep PLS 7501.25PG plasma cutting machine was manufactured in 2008. It features a robust MicroStep MSNC500 control system and dual cutting capabilities with a HPR 260 AGC plasma and an acetylene gas burner. The machine offers a maximum cutting thickness of 50 mm and operates efficiently within a large working field. If you are looking to get high-quality cutting capabilities, consider the MicroStep PLS 7501.25PG machine we have for sale. Contact us for more information. Application Types Cutting

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Fjdpfxjwmqwyo Ad Nogi

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 Fgsdpfswhk E Hex Ad Noi AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Year of construction: 2006 Working area: 6,000 x 2,000 mm Incl. 500 mm pipe shaft for pipe and beam processing 1 x plasma cutting system Kjellberg HiFocus 160i with automatic gas console Cutting range steel up to 30mm, exchangeable head Manufacturer's data sheet: Kjellberg HiFocus 160i 2 x oxyfuel cutting torches up to 150mm Support table, extraction table 2,000 x 6,000 mm Fodpfxjrurrae Ad Nsgi Shaft for processing pipes and profiles (without pipe cutting device) Complete gas supply with pressure reducer MMI console with 15″ touchscreen Machine control: MicroStep MSNC500® (based on Windows XP) Software: MicroStep CAM AsperWin Basic® Version 3.2 Spare parts and spare parts cabinet for plasma and oxy-fuel torches Filter system: Donaldson DFPRO 6 with existing feed pipes

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Fedpfxoxnmbnj Ad Njgi Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source Filtration system TEKA 31125

Condition: like new (used), we are interessted in buying obsolete electronic components, semi conductors microprocessors, etc Fgodpfoizi Twox Ad Nji

Condition: good (used), Year of construction: 2021, operating hours: 5,400 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, - Power source Hypertherm Powermax 65 Fgedpfx Ajtlq Riod Nji - Piercing up to max. 16 mm - Needle marker - TEKA filter system Machine on: 5400 h Cutting times: 590 h Table size: 6000x2000 mm Permissible sheet thickness: up to 100 mm material thickness High-quality linear guides

Year of construction: 2023, condition: ready for operation (used), A new CNC plasma cutting machine MicroStep including air plasma power source Hypertherm, nesting program and Aigner filter system is available. 1) CNC plasma cutting machine MicroStep MasterCut Compact, year of manufacture: 2023, processing dimensions X/Y: 3000mm/1500mm, machine dimensions X/Y: approx. 4350mm/2650mm, weight: approx. 3100kg, plasma source: Hypertherm Powermax 45 XP, control: MicroStep iMSNC, operating hours: approx. 2588h. 2) Plasma cutting and gouging unit Hypertherm Powermax 45 XP, max. material thickness: 25mm, max. cutting speed: 500mm/min. 3) Aigner filter system, weight: approx. 500kg. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025. Fedpfx Ajwn H Udjd Njgi

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Fgodpfjwinpxsx Ad Nei Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected under power in Vilnius.

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL-P 12001.20 Year of manufacture: 2007 Fedpjuv Hkgjfx Ad Nogi CNC control 1 plasma torch with Kjellberg HiFocus 160i power source Extraction table: 2 x 12 m Filter system: Donaldson Torit DCE 31125ä

Condition: excellent (used), For sale: original Swiss BIAX BL 40 electronic scraper, complete transport set with case, holders, and accessories. This is a professional tool for manual scraping of guideways, plates, bearing surfaces, and fitted mating surfaces – used in precision machining workshops and for machine refurbishments. Technical specifications: • Model: BIAX BL 40 • Type: electronic scraper (Elektronik-Schaber) • Power supply: 230 V / 50–60 Hz • Power: 320 W Fedpfx Adextflis Nsgi • Current consumption: 2.3 A • Speed: up to 1800 min⁻¹ • Tool weight: approx. 2.3 kg • Made in Switzerland Condition: • Used, in very good technical and visual condition • Original, flexible power cord • Complete transport case, internal foam in good condition • Set has passed DGUV (German safety test) inspection Included in the set: • BIAX BL 40 scraper • Original BIAX transport case • Spare blades and holders • Service wrench and mounting accessories • Documentation and user manual Application: Precision scraping of guideways, mounting plates, machine bodies, cast iron and steel components. Ideal for toolrooms, CNC service centers, machine refurbishment, and high-precision finishing work.

Condition: used, Tepla Tepla 400 SC 230 Volt 13A 50/60Hz Pressure: 4-6 bar Scope of delivery: (see pictures) We will be happy to answer any further questions you may have over the phone. Fgedpfx Aju T Egfsd Nji Written order possible by email or fax

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive Fgsdpfx Aedkqg Ssd Nji -Type: Microdrive-3 UDZ-70 -Power: 33-44 kW -Connection: 380-480 V -20/+5% 48-62 Hz -A: 70 A -Dimensions: 440/145/H685 mm -Weight: 35 kg