Used Plasma Power Sources for sale (39,985)

Condition: used, Year of construction: 2008, Plasma power source for plasma cutting machine Manufacturer: Kjellberg Type: HiFocus 80i Year of manufacture: 2008 Bedpszn Hp Sjfx Aa Iewu Power: 80A Cutting thickness: 0.5 to 25 mm Includes hose package and torch Manual gas console 28926

Condition: used, Year of construction: 2024, controller model: , _____ Description: Year of manuf. : 2024 Punch Bwjdpfx Asz Exv Nja Iju Model:Dynamic Version Max. sheet size without repositioning:3,100 × 1,550 mm Positioning speed (X/Y axes):1,500 mm/s Max. punching speed:900 1/min Laser power:4 kW (IPG) Revolver :-20 stations, 10 of which are rotatable :-1× MT16 multi-tool station :-1× MT6 multi-tool station, rotatable :-Thread forming station :-Forming station Features :-Automatic die adjustment :-Camera monitoring :-Remote control panel :-Accessory kit :-Nitrogen purge :-Locking cylinder for R-Multitools :-Multithread lubricator, tool lubrication :-Punch part flap :-Small laser part flap :-Large laser part flap :-Scrap conveyor belt

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Bwedpfox Ek Rdjx Aa Iju Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Condition: used, machine/vehicle number: 000150000222, welding current max. 260 A Bjdsf Sa T Uspfx Aa Iswu 260 A at 60 % ED 201 A at 100 % ED remote control SELCO RC08 space requirements length - 560 x width - 240 x height - 400 mm weight approx. 37 kg

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled Bedpfx Aezugnzoa Iewu - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Bjdpfjpy Uzysx Aa Ijwu Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: used, MIG MAG welding machine, gas-shielded welding system, MESSER LINCOLN, type MagStar 18 Serial No. 4210048, Year of manufacture approx. 1995 Output: 180 amps = 60% duty cycle 140 amps = 100% duty cycle Setting range: 8 power levels Mains connection: 400 volts, 50 Hz, 16 amp plug - Spot welding attachment - 2-roller wire feeder - 3 meter hose assembly with central connection Bodpszugn Isfx Aa Ijwu - Welding gas pressure regulator Space required L x W x H: 1150 x 460 x 650 mm Weight: 100 kg In good condition

Condition: new, input voltage: 400 V, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 300 A, welding current (min.): 25 A, welding current (max.): 400 A, Lorch iQS series – Top-level welding for maximum productivity in industrial manufacturing Maximum performance and reproducible quality: The Lorch iQS series is a powerful, digitally networked MIG-MAG welding system for demanding industrial applications. The newly developed inverter generates an exceptionally stable and smooth arc. All parameters can be continuously adjusted to the optimal operating point – for high-quality, reproducible welds on steel, stainless steel, and aluminum. The iQS is suitable for both manual welding and robotic integration, providing a future-proof platform for modern manufacturing companies. Less spatter, less rework: The innovative Smart Process Control Engine enables continuous development of the available welding programs. New processes and functions can be transferred to the system, ensuring that users always work with the latest technology. The integrated RCS module improves short-circuiting in particular: the process runs more cleanly, the weld pool is easier to control, and spatter formation is reduced. This increases weld quality and reduces time-consuming and costly rework – especially on thin sheets under 3 mm. Lorch Speed processes for higher productivity: Depending on the configuration, proven Lorch processes such as SpeedPulse XT, SpeedArc, SpeedTwin, SpeedRoot, SpeedUp, and SpeedCold are available. They enable higher welding speeds, better penetration, attractive weld bead surfaces, and precise process control. Users receive a flexibly configurable solution for a wide range of materials, weld geometries, and welding positions. Intuitive operation with Smart Cockpit: The robust 7-inch Smart Cockpit can be operated via touchscreen or rotary control – even with welding gloves. A clear menu guides users, displaying only suitable material, wire, and gas combinations, thereby reducing incorrect settings. Important parameters can be accessed immediately via the configurable QuickAccess menu. Current values are visualized during welding; subsequently, the Hold function indicates whether the specified parameters have been met. Networked, robust, and easy to service: WLAN and Lorch Connect enable the recording, documentation, and analysis of welding data, as well as updates and future function upgrades. The encapsulated air duct, the dust-protected electronics area, and the modular design simplify maintenance and ensure uncomplicated service. Optionally, the robust MF-09 wire feeder complements the system with 4x4 drive, a quick-change system, and various chassis and transport options. Technical performance variants: The iQS 3 offers a welding range of 25 to 320 A, and the iQS 5 offers a range of 25 to 400 A. Both models operate on 3-phase power supplies from 380 to 480 V, have an IP23S protection rating, and a robust 4x4 wire feed unit. The equipment and scope of delivery depend on the chosen configuration. Bwedpfx Aszwfgbea Isu Document 1: technical details IQS series (EN) Document 2: brochure IQS series (EN) Document 3: technical data IQS series (DE) Document 4: brochure IQS series (DE)

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooler for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding unit POLYSOUDE PS 204 + RC 200 Year of manufacture: 1996 Serial number welding source: 9785153 Serial number cooling unit: 968628 Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Mains connection: 230 volts, 50 Hz, Schuko plug - Note: Display on the power source becomes illegible after some time Bodpfx Aoyhq A Roa Ijwu - Remote control cable type BP 1436 with 7.5 meter connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 118,643 operating hours (read off) - Operating and maintenance manual Space requirement welding machine (L x W x H): 550 x 360 x 500 mm Space requirement cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Note: Display on power source becomes illegible after some time Without accessories Price applies to one set consisting of 1x power source and 1x water cooler.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Bwodpfxjt Awm Dj Aa Isu Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Bsdjdz Srbjpfx Aa Iswu Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition 2 units available, price per unit

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Bwjdod N E Rvspfx Aa Isu Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: used, MIG MAG welding machine, gas-shielded welding unit, CLOOS type GLC 357 N MIG MAG welding power source Manufacturer's number: 576, Year of manufacture: approx. 1985 Rated power: 350 Amps Bwedpfxehubg Te Aa Iou Power: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Adjustment range: stepless Connecting hose package: 4.5 meters Mains connection: 380 Volts, 50 Hz, 32 Amp plug - 2-cycle and 4-cycle welding system - external wire feeder, type CK 72 ZK, with 2-roller drive and 4.5-meter hose package - 3-meter hose package with central connection and CLOOS hand torch - water-cooled - pressure gauge for gas cylinder - welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg Device tested - function is working properly.

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, sheet thickness aluminum (max.): 80 mm, cutting height (max.): 200 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, type of cooling: water, Equipment: documentation/manual, double-sided, MicroStep MasterCut 6001.20PG – 6,000 × 2,000 mm – Plasma + Oxyfuel For sale is a MicroStep MasterCut 6001.20PG CNC plasma/oxyfuel cutting system with a working area of 6,000 × 2,000 mm, manufactured in 2025. Equipped with a Kjellberg SmartFocus 300 fine plasma power source and an additional fully automatic oxyfuel cutting system. The system is designed for processing steel, stainless steel, and aluminum. Key technical specifications: - Working area: 6,000 × 2,000 mm Bsdpfoz Hcr Dox Aa Iowu - Plasma: up to 80 mm - Oxyfuel: up to 200 mm - Kjellberg SmartFocus 300 Amperes - Fully automatic plasma support - Fully automatic oxyfuel support - Automatic gas consoles - Elevated gantry design - Smart Z movement - Active collision protection - MicroStep control with 24" touchscreen - Asper Basic 2D CAD/CAM - RemoteDiagnostics Included with the system is a Donaldson DFPRE 4-R filter/extraction system with 9.0 kW. The extraction system is explosion-proof and equipped with appropriate ATEX features, making the system suitable for cutting aluminum. The machine has been used very little and is in good condition. Inspection and demonstration under power are possible by appointment.

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volts AC Input frequency: 47-63 Hz Input current: max. 12 Amps Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relay - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface Bwodpfx Aasdz Srao Isu - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-up - Condition as shown, without additional accessories and connection cables Additional connections: - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) Dimensions H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition

Condition: good (used), functionality: fully functional, Year of construction: 2018, Travel ranges: X/Y/Z: 3,048 x 1,524 x 150 mm Bedpfszbxn Uox Aa Iewu Laser: CV-5000 (CO²) Operating hours: approx. 9,000 h Cutting head with lens: 5´ / 7.5´ / 9´ Control system: Prima Power NC Expressw e³ Laser Classic Pallet changer: Prima Power/OMS Sordella, max. 3,300 kg Extraction system: Donaldson 2DFP4-SPRK, 2,400 m³/h Cooling system: Hyfra Sigma 67-S Equipment: Sheet metal recognition, oil mist lubrication system, plasma monitoring, laser piercing monitor (LPM), pallet changer with light barriers, machine enclosure.

Condition: good (used), Year of construction: 2003, Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm Bjdpfswkqmisx Aa Iswu -Weight: 12.4 kg/pc.

Condition: used, Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 3232, working width: 1,500 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, For sale is a MicroStep CNC cutting system from the MG series, model MG 6001.15PrkGB+CH500P, manufactured in 2022, with approximately 2,000 operating hours. Equipment: - Plasma rotator for weld preparation with Kjellberg Q 3000 plasma power source - Fully automatic oxy-fuel support - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Pipe cutting device RSV 30-300 - Filter system TEKA ZPF 6H with 11 kW Bsdpjz A Tk Nsfx Aa Iewu Technical data: Working area approx. 6,000 x 1,500 mm + 500 mm clearance Max. travel height approx. 150 mm Max. table load approx. 100 mm Guideways in the X-axis: Linear guideways with helical gear racks Drives: Digital, maintenance-free AC servo motors with IRC Positioning speed up to 40,000 mm/min. Positioning accuracy ≤ 0.06 mm/m Bidirectional repeatability 0.05 mm/m Inspection: An inspection is possible at the location in Wörth a. d. Isar. Interested? The machine is offered in an online auction. Further information and documents are available upon request. Simply contact us!

Condition: used, Year of construction: 2012, CNC gantry plasma cutting machine Manufacturer: Microstep Type: SPL-P 13501.30 Year of manufacture: 2012 Working area: 3,000 x 13,500 mm Bedpfx Aajz H I Auj Iewu 1 plasma torch with Kjellberg HiFocus 161i power source Automatic gas console 21026ä

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: R4108IZLD, NEW, UNUSED ComPal Power 100 kW Diesel Generator – 125 kVA For sale: ComPal Power industrial diesel generator, model VG-R100. The generator is suitable for industrial applications, backup power supply, and continuous operation. Bwedpfoz Hddnex Aa Isu Technical specifications: - Manufacturer: ComPal Power - Model: VG-R100 - Rated output: 100 kW / 125 kVA - Standby output: 110 kW / 137.5 kVA - Voltage: 400 / 230 V - Frequency: 50 Hz - Phases: 3 - Power factor: 0.8 - Speed: 1,500 rpm - Rated current: 125 A - Rating: Continuous - Engine model: R4108IZLD - Alternator model: Y4D - Year: 2025 - Serial No.: LB2510705-57 The generator is suitable for use as an industrial power source or an emergency/standby generator. Inspection is possible by appointment. Loading and transport can be arranged upon request.

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups Bwodpezl D Exsfx Aa Ieu - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: good (used), Year of construction: 2013, Used plasma cutting machine from Haco Type: Compact 3015 Table dimensions: 3000 x 1500 mm Bodpfoznun Nsx Aa Iswu Hypertherm HPR 130 amp power source Includes spare parts

Condition: used, Year of construction: 2015, Technical details: Bwodpozlic Nofx Aa Isu table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, EX-Trafire 30H Hand System starter 230V Plasma system Bwodpfx Aez D Aiwsa Iju Portable and powerful Cutting performance Cutting width (mm) (structural steel) 10+ Recommended (mm) 8 Piercing (mm) 8 Cutting current (A) 10-30 Duty cycle: 100% @ 21A - 88.4V 60% @ 25A - 90V 35% @ 30A - 92V Voltage 220-240 V Air flow (lpm/bar) 48/4.5 Pressure (max) (bar/psi) 10/145 Dimensions W x L x H (mm) 165 x 480 x 290 Includes hand torch FHT-EX 30H and wear parts Starter kit

Condition: good (used), Year of construction: 2016, functionality: fully functional, Well-maintained plasma cutting machine with a 6,000 × 2,000 mm working area, Kjellberg plasma source, and Donaldson Torit DCE extraction system. Bsdpfxoz Hykke Aa Iewu Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Machine type: Plasma cutting machine Year of manufacture: 2016 Working area: 6,000 × 2,000 mm Plasma source: Kjellberg HiFocus 161 neo Cutting range, sheet thickness: 1–30 mm Extraction system: Donaldson Torit DCE Condition: Good Maintenance: Serviced annually by MicroStep Location: Rottweil The seller can assist with loading.