Used Flatbed Die Cutter for sale (16,566)

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Njdpjdzqmzjfx Aa Eodf Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Year of construction: 1988, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1624, For sale: Two identical WUPA PS 6.2 punching machines On request, we offer two identical punching machines of the type WUPA PS 6.2 for sale. One of the machines was completely overhauled in 2020. All essential components were renewed – including gripper punches, gripper chains, the platen, as well as all ball bearings. The machine has been in excellent condition ever since. Ndodswnfgrepfx Aa Eef The electronics have not been rebuilt or changed. Everything is original. Documentation is complete. Both digital and analog, we have circuit diagrams and exploded drawings. Technical data: Model: WUPA PS 6.2 Year of manufacture: 1979 Max. sheet size: 1,450 x 1,050 mm Min. sheet size: 600 x 400 mm Max. capacity: 4,000 sheets/h Max. cutting force: 350 t Material thicknesses: – Paper from 80 g/m² – Cardboard up to 2,000 g/m² – Corrugated board up to EB flute Equipment: – Non-stop feeder – Non-stop delivery Note: All information provided without guarantee. Subject to errors and prior sale. If you are interested or have any questions, we will be happy to assist you. Best regards

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Type of machine: Embossing and die-cutting system / automatic sheet die-cutter Machine number: 400018 Year of manufacture: 2004 Machine specifications Maximum strokes per hour: 9,000 sheets/h Length without feeder: approx. 5,190 mm Length with feeder: approx. 7,770 mm Maximum width: approx. 2,400 mm Maximum height: approx. 3,200 mm Maximum height with access window open: approx. 3,930 mm Weight without feeder: approx. 30,400 kg Weight of feeder W4: approx. 3,000 kg Internal closing frame width: 820 x 1,134 mm Maximum die-cutting tool size: 816 x 1,130 mm Maximum die-cutting area: 800 x 1,120 mm with gripper margin Gripper margin adjustable from: Standard 11 – 17 mm with 13 mm wood before 1st knife Option 8 – 14 mm with 10 mm wood before 1st knife Rule height: 23.8 mm Maximum pile height (feeder, incl. pallet): 2,000 mm Maximum pile height (delivery, incl. pallet): 1,700 mm Maximum pile weight (feeder): 1,000 kg Maximum pile weight (delivery): 1,000 kg Maximum rest pile height (feeder): 450 mm Maximum rest pile weight (feeder): 450 kg Maximum auxiliary pile height (delivery): 200 mm Maximum auxiliary pile weight (delivery): 200 kg Pallet sizes Feeder: max. 800 x 1,200 mm (EURO pallet) Delivery: max. 800 x 1,200 mm (EURO pallet) Maximum pallet height: 170 mm Nodpfx Aasv T T N He Esdf Drive and electrical supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, a pneumatic clutch with spring-loaded brake is installed, which is used to engage and disengage the machine. The motor runs continuously. The control cabinet placed at the machine contains, except for a few devices, all control components for the die-cutter and feeder. Command and indicator devices are located on the machine itself, distributed across the control panels as required. Control cabinet Equipment: Power supply, main switch, fuses, motor protection, PLC control Electrical rating: 3 phase, 400 V AC, 50 Hz, 63 A Control voltage: 24 V DC; 230 V AC; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run can be arranged at any time. Various accessories are included. Patent-protected chain guide rails from QTM have been retrofitted. Price: On request

Year of construction: 1988, condition: good (used), functionality: fully functional, machine/vehicle number: 0591 009 03, For sale is a Bobst SP 102-CER in good condition. The machine has no defects or maintenance backlog. The electronics have not been modified or altered. Everything is still original. Documentation is complete. We have circuit diagrams and exploded views for both digital and analogue systems. All frames and pins are present to utilize the machine's functions, especially for the stripper, blank separator, and lower stripping station with pins. There is a quick-clamping system so that the stripper, for example, does not need to be secured separately. Ndedpjwk I Iqofx Aa Ejf If interested, additional pictures or videos can be sent. Bobst SP 102 CER Year of manufacture: 1988 Max. format: 1020 x 720 mm Min. format: 400 x 350 mm Max. speed: 8000 sheets/h Max. cutting force: 250 t Paper: min. 80 g/m² Cardboard: max. 2000 g/m² Non-stop feeder Non-stop stacker Side guide Quick-release lock We can assist with disassembly, assembly, and transport. Special feature: The machine is raised by approximately 100 mm, eliminating the need for a pit in production! The raised frame can be removed without tools and is not permanently attached to the machine. Please feel free to contact us with any further questions. Best regards

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Nedpfou Snwmox Aa Eedf Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: used, This Krause C64-50 Autofeed Die Cutter is a powerful machine designed for precise and efficient die cutting work. With a maximum format of 600 x 500 mm, it offers the flexibility to handle a wide range of materials. The machine is currently located in the Netherlands and is standing still, which represents an ideal opportunity for those looking for a high-quality die cutting machine. Njdevfx Uljpfx Aa Eedf Format: 600 x 500 mm Equipment: Krause autofeed die cutter Max. Size: 60 x 50 cm (23 x 19 inch)

Condition: good (used), Year of construction: 2000, operating hours: 23,000 h, Bobst SP 142 CER II Ndodpjxxypysfx Aa Ejf

Year of construction: 2004, operating hours: 38,000 h, condition: excellent (used), Bobst SPanthera 106LE automatic die-cutter Ndodpfsxx Txzsx Aa Eof Size: 76 x 106 cm Technical Details: paper from 70 to 1000 gsm corrugated board up to 2 mm max. format: 760 x 1,060 mm min. format: 350 x 400 mm speed up to 9,000 Equipment: stripping station optical register infeed automatic pile feeder adjustment ultrasonic double sheet detector Centerline 1 micrometric plate 1 plate 4 mm 2 closing frames quick Lock stripping Non-Stop delivery elevated 220 mm

Condition: good (used), Busch Model B Label Puncher Professional machine made in Germany. Busch is a leader in the production of pallet turners and pushers. Ndedpex Hqmuofx Aa Ejf Very good condition, ready for production. The machine is equipped with a quick-action hydraulic unit. Safety guards, die-cutting clamps with micro-adjustment in every plane, and additional rotational adjustment. Quick and convenient die-cutting leveling. Adjustable feed table in every plane. Long delivery tail. Maximum format 230x230mm Weight 850kg 400V power supply The machine can be used to produce labels, calendars, sample cards, etc.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV - 1680x1160 Machine little used, in very good condition, new upgraded electronics + laser protection Ndedouwruaopfx Aa Eof Equipment: - pneumatic clutch and brake - control panel - New upgraded electronics + laser protection - 3 modes of operation: single, continuous, with time delay on opening - central lubrication - additional safety guards - operating tools - hard plate for pressure

Condition: good (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 21860, Cylinder Die-Cutter Heidelberg SBG 56x77 Nodpfoxltnpjx Aa Eedf Serial Number 21860

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits Ndsdpfxjwh Tq So Aa Ejf • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: good (used), Year of construction: 2022, functionality: fully functional, Fully automatic die-cutting and creasing of paper, cardboard, and films Magnopro I-CUT12090 Year of manufacture: 2022 Latest software including NEW touchscreen control unit from 2024 Connection: 230 V Nsdpfxjwbgm Ho Aa Eedf Material thickness depending on model: 10 mm Data formats: PLT, DXF, HP/GL, PDF, EPS Feeder: sheet feeder with vacuum/roll-off device (optional) Max. format: 90 x 120 cm Dimensions (W x D x H): 320 x 150 x 115 cm Alignment: CCD camera system Speed up to 1000 mm/sec Positioning: vacuum belt Dpkktr Programming: barcode reader, QR code Accuracy: +/- 0.1 mm Sheet and roll feeder! Plus 19% VAT For self-collection only

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Njdpjx Hqmnsfx Aa Eedf Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate Nedpfx Aaex I Acqo Esdf

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Non Stop Feeder & Delivery Nedpswr T Aiofx Aa Eodf Center Line System: for Quick Job Changeover Working Hours: 1500h

Condition: good (used), Kama TS 74-60 Automatic Die Cutter One of the rarest models on the market. Manufactured in 2006, with a run of only 43 million sheets. Machine serviced and maintained on time. Format: 540x740mm Fully automatic, smooth speed control, central lubrication, and safety guards. Includes two frames, several hard sheets for clamping, trolleys, a tool kit, and documentation. Ndjdpfoxzuluex Aa Esf

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III - 1480x1070 Machine little used, in very good condition Equipment: - pneumatic clutch and brake - control panel - quick release frame + additional frame - 3 modes of operation: single, continuous, with time delay on opening - central lubrication - additional safety guards - operating tools - hard plate for pressure Ndodpouwrtiofx Aa Eof

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame Ndjdpfx Ajwq Dwzsa Eef – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Possibility of testing in the showroom in Radom.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III - 1480x1070 Machine little used, in very good condition Equipment: - pneumatic clutch and brake - control panel - quick release frame (electric) + additional frame - 3 modes of operation: single, continuous, with time delay on opening - central lubrication - additional safety guards - operating tools - hard plate for pressure Nodpfeuwrrrox Aa Ejdf

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container. Nsdpfjwfq T Ssx Aa Ejdf

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine little used, in very good condition Equipment: Ndsdpfxouwru Ho Aa Ejf – Pneumatic clutch and brake – Console – Heated plate – 3 working modes: single, continuous, time-delayed opening – Centralized lubrication – Additional safety guards – Working tools – Hard pressure plate

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. Ndodpfx Aaoxzulze Esf The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), Erba Titan Model 3 die cutter Format: 830×1200 The machine is fully operational, ready for production. Titan is synonymous with power, it is the strongest machine in its class. Production Italy Format in frame 830×1200 mm Format of the press 855x1230mm Weight 6900kg Power supply 380V Number of cycles 900-1400/h Installed power 5.5 kW Ndsdpfx Aaew D E Rve Eef Equipment: – electromagnetic clutch and brake – control panel – 3 operating modes: single, continuous, with time delay on opening – central lubrication – additional safety guards and two pressure safety mats – service tools – hard sheet metal for the press

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Nsdpjwmy Rijfx Aa Eedf Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.