Used Die Cutting for sale (26,228)

Condition: new, Year of construction: 2025, ML750 Inner chase size 750 X 520 mm Max. die cutting size 750 X 520 mm Working speed 28±2 s/min Max. rule length ≤15 m Hfjdpsvv R H Usfx Aacen Motor power 2.2 kW Weight 2000 kg Overall machine dimensions 1650 X 1540 X 1650 mm

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Hfodpfep H Swdjx Aacen Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: new, Brand New - One Year Warranty Max. die cutting size 1100 X 800 mm Working speed 23±2 s/min Max. rule length ≤30 m Motor power 5.5 kW Hedpfx Aevv R Hzeacjfn Weight 4500 kg Overall machine dimensions 2080 X 1950 X 1900 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System Hfjdpfjwypp Isx Aacon - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: excellent (used), Ref: 11018 . Heidelberg SBG Cylinder Professionally converted for precision die cutting and creasing applications Features: For die-cutting / creasing in packaging and commercial finishing Used for carton production, creasing, embossing, or die-cutting Cylinder mechanism ensures consistent pressure distribution Ideal for materials such as cardboard, paperboard, and synthetic substrates Hjdpfsxnzq Rjx Aacjfn Highly efficient, accurate and durable Long-term mechanical reliability Specification: Max sheet size: 560 × 770 mm Min sheet size: 115 × 160 mm Speed: 3,500 – 4,600 sheets/hour Machine size (L×W×H): 3,500 × 2,000 × 1,850 mm Net weight: 5,300–6,000 kg

Year of construction: 2001, condition: excellent (used), Make: Trump card Type: TRUMATIC 2000R Year of construction: 2001 Hfodpfxodyn Rij Aacen Work area: 1270 x 1270 mm Punching power: 18 to Maximum sheet thickness: 6,4 mm Maximum workpiece weight: 75 kg Maximum punching diameter: 76 mm Max speed: 90/60/108 m / min Accuracy: +/-0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, very good condition, just thin sheets

Year of construction: 2020, condition: used, with sectional conveyor belt, SIEMENS Simatic HMI Touch control, operator panel with stairs and railing, min. sheet size: 400x350 mm, max. sheet size: 1060x760 mm, minimum material weight: paper 90 g/m², maximum material weight: solid board 2,000 g/m², maximum paper stack weights: main stack: feeder 1,000 kg, delivery 900 kg, auxiliary stack: feeder 380 kg, delivery 50 kg Hodpfx Aoxnanbeacjfn

Condition: excellent (used), Year of construction: 2003, operating hours: 31,486 h, Medium format Operating hours: 31,486 h Hfedpfxjxl R I Tj Aacen Price on request

Condition: used, Year of construction: 1977, Bobst Autoplatine SP 1420 E - 600 T (1977) Year of manufacture: 1977 Speed: 5,000 sheets/hour Counter: 5 million Size: max. 1420 x 1020 mm min. 700 x 500 mm Equipped with: Hodpfsxfu Drox Aacofn • New gripper bar • New chains Available: immediately Location: Germany

Condition: excellent (used), functionality: fully functional, CG 3 – Holding Point Grinder for Die Cutting Tools With pneumatic drive for high traction force and a patented hold-down system. Designed for burr-free grinding of holding points while maintaining the functionality of the rubber ejection material. The pneumatic drive uses compressed air to deliver very high and consistent traction force, available at all times without the need for charging cycles or battery changes. The fabric-reinforced compressed air hose is highly flexible. The large support surface prevents tilting during grinding, enabling the operator to grind the holding points straight and accurately in position. The depth of the holding point is precisely set using the depth adjustment. The patented hold-down system for rubber ejection and stripping materials prevents grinding into the rubber or profile. The advantage: fewer and smaller holding points are required, and the performance of the die rubbering remains intact. The holding point grinder is available in versions for corrugated and solid board. The attachments are matched to the standard widths of diamond grinding wheels for both corrugated and solid board. With diamond grinding wheels, breakers can be optimally set. Compared to stone grinding wheels, diamond wheels are extremely robust and thus more resistant to breakage. They are also more durable and sustainable. Each holding point grinder comes supplied with the correct size diamond grinding wheel for the machine. In addition to the holding point grinder, manual holding point tools are ideal for use. The chisels can enlarge the holding points after grinding if required. Two manual holding point tools are also included in the package at no extra cost. Advantages at a glance: Pneumatic drive for consistently high traction force Large support surface for straight, precise grinding of holding points Patented hold-down system for solid and corrugated board Hodpfsxltkqox Aacefn Note: The unit operates with diamond grinding wheels size 50 × 8 mm.

Condition: excellent (used), Year of construction: 2013, Carton blank die-cutting machine, low operating hours. The machine is still connected and can be demonstrated. Immediately available. Hsdoxluukepfx Aacefn

Year of construction: 2000, condition: used, Punching machine Noble Hfodpfsg Dgyxox Aacen HM 35/350 BKE 200/5 Maximum pressure 35 T 5 mm sheet thickness at 40 kp/mm²

Year of construction: 2010, condition: used, with operator platform, 2 BUSCH conveyor belts, format: 74x106 cm Hodpsxnanhsfx Aacjfn

Condition: good (used), Year of construction: 2021, operating hours: 14,000 h, functionality: fully functional, Professional finishing in the classic digital printing format: This is why we have developed the world's first flatbed die-cutter for the B3+ sheet format KAMA ProCut 58. The versatile professional die-cutting/embossing machine (580 x 400 mm) is extremely versatile. Punching, creasing, scoring, perforating and kiss-cutting labels, blind embossing and Braille as well as hot punching of plastic. Paper from 80 g/m² Cardboard max. 800 g/m² Plastic 80 - 800 g/m² (up to 1 mm) Sheet format max 580 x 400 mm Sheet size min 210 x 148 mm Speed* 6,000 sheets/h Punching force 120 t (1.2 MN) Hsdpexb A Tgefx Aacjfn Punching format max 570 x 380 mm Gripper edge 10 mm Dimensions (length x width) 2.6 x 1.75 m

Condition: new, · Die easy to replace · Automatic feeding with double sheet detection and automatic correction · Allows plain paper, coated paper, cardboard, PE film, etc. · Mainly suitable for stickers, tags, wine labels, playing cards, small boxes, etc. · Rotary die-cutting machine with magnetic cylinder · High pile suction feeder · Touch screen · Machine with automatic stripping Hfedpfxofg Ahus Aacon · Three-cylinder system, with cover plate · Precision pressure adjustment · Wrap-around ejection system · Sensor for top reading and front registration

Year of construction: 2025, condition: new, Die-cutting machine ML-1200 NXL Brand new machine. This is the strongest die cutter in this format. Format: 1230 × 850 mm Weight: 5500 kg 380 V power supply Engine: 5.5 kW Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 operating modes: continuous, time delayed, manual – central lubrication – additional safety covers – operating tools and instructions with CE documentation. Hfodpfx Aajumuxxocsn The machine is available „on the spot” We provide a 12-month warranty. Our machines, as few on the market, are adapted to the current regulations in Europe. Possibility of testing in the showroom in Radom.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Hfodpsw Udy Nofx Aacsn Feel free to contact me for more information.

Condition: used, Year of construction: 1993, - Holder for Trumpf punching tools - Digital position display for X- and Y-axis - incl. tools & accessories - year of construction 1993 Hedetq H Sxepfx Aacjfn Technical data: - Capacity: 25 t - Max. Sheet thickness: 6 mm - Max. Punch thickness: 90 mm - Stroke rate: 200 /min - throat depth: 510 mm - Motor power: 4 kW - Operating voltage: 400 V - Dimensions WxHxD: 1000 x 1770 x 1350 mm - Weight: approx. 2000 kg

Condition: excellent (used), Year of construction: 2012, IBERICA OPTIMA 105 Year 2012 Max.Speed: 9,000 Sh/h Max.Size: 760x1050 mm Min.Size: 350x400 mm 10900 running hours Hfodpfx Aajwdnrvecon Max.Cutting force: 300 T Min.Paper: 90 gsm Max.Paper thicknes: 1.5mm QuickLock system Centerline Non-stop in production

Condition: good (used), Year of construction: 1996, machine/vehicle number: 559803, BOBST AUTOPLATINE SP 1420 E Hfsdsvutwtepfx Aacen Machine used in continuous operation. Used for the production of corrugated and solid board packaging. Maximum die format: Width: 1420 mm Length: 1020 mm Minimum format: Width: 700 mm Length: 500 mm

Year of construction: 1964, condition: excellent (used), max. size 26 x 38 cm age 1964 ink unit not complete 2 closing frames Hjdpfx Aaelzi A Iocjfn dry sprayer Delivery time: immediately from stock

Condition: good (used), ML-800 NXL Die-Cutting Machine This machine is used to cut shapes from a mold (die) from materials such as paper, cardboard, leather, plastics, etc. The machine is in perfect condition, manufactured in 2018. First installed in 2020. This is the heaviest die-cutting machine in this format, precise. Format: 830 x 560 mm Weight: 2500 kg Power supply: 380 V Motor: 2.5 kW Equipment: – Electromagnetic clutch and brake Hfodpfsxgbgpsx Aacsn – Quick-mount frame – 3 operating modes: continuous, time-delayed, and manual – Centralized pressure lubrication – Additional safety guards – Operating tools and instructions with CE documentation.

Condition: good (used), Year of construction: 2008, 52605 operating hours die cutting pressure 250 t adjustable gripper edge 9 - 17 mm Hfjdpfx Aswt Nwleacjn material thickness 90 - 2000 g / m2

Condition: good (used), Year of construction: 1960, max. size 54 x 72 cm age 1960 ink unit not complete for die cutting / embossing Hfodpfxew Ru R Do Aacon

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is ready for production. Format: 540x720mm Hfsdpfexgbffex Aacon The machine is ready for die-cutting. Fully automatic, central lubrication. Includes a mounting frame, cylinder sheet, trolleys, and a set of fillers and locks. Transport and installation are available.