Used water-jet cutting equipment and machines for sale (49)

Condition: repair required (used), Year of construction: 2007, operating hours: 67,367 h, functionality: not functional, machine/vehicle number: W288, repeat accuracy: 0.01 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 3,000 kg, type of input current: three-phase, input voltage: 250 V, sheet thickness aluminum (max.): 100 mm, table length: 3,000 mm, operating speed: 6,000 mm/s, table width: 1,500 mm, tank capacity: 5,500 l, pressure: 3,600 bar, positioning speed: 60 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 2 m/min, table height: 1,000 mm, operating pressure: 3,600 bar, year of last overhaul: 2024, waste water connection: 50 mm, input frequency: 50 Hz, power: 120 kW (163.15 HP), controller manufacturer: Bystronic, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, Equipment: safety light barrier, Bystronic Byjet 3015 Waterjet. This machine has a 3000 x 1500 cutting table up to 200mm thickness, complete with two cutting heads. The waterjet is powered by a Bypump 50 APC hydraulic unit. This machine was regularly serviced by a Bystronic service engineer. Dcedpozlt Ayofx Aqvsp This machine is being sold as as a spare parts machine, but could be easily put back in production. It has a new hydraulic pump fitted shortly before it was taken out of production. It comes complete with a chain conveyor with paddles for the automatic removal of used garnet from the cutting beds. It also comes with an air blower and reservoir tanks for the raising and lowering of the water levels in the cutting bed for reducing the noise levels during the cutting process.

Condition: like new (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 1872509, overall weight: 1,000 kg, We offer a well-maintained high-pressure water pump UHDE HP 19/15-S. Year of manufacture 2007. Condition is as new. Dcedpfxo Ahw Ere Aqvjp

Condition: repair required (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 387818, operating pressure: 4,000 bar, Mechanical part and the pump in working order, electric box partially defective. Buyer is responsible for de-installation and transport. Dode Ahd Tlspfx Aqvjcp

Condition: used, Year of construction: 1997, CNC-controlled high-pressure waterjet cutting system with two cutting heads, abrasive feed, and two external high-pressure pumps. Manufacturer: H.G. Ridder Automatisierungs-GmbH Dcsdpfx Aj Aiccdsqvjp Model: HWH-6020-2 Machine type: CNC waterjet cutting system Year of manufacture: 1997 Working area: 6,000 x 2,000 mm Number of cutting heads: 2 High-pressure pumps: 2 external pumps Maximum pump pressure: 4,000 bar each Control system: Siemens SINUMERIK Cutting process: Waterjet cutting with abrasive feed Cutting head designation: WARDICUT Abrasive feed: Present Cutting table: Water basin with slat support Machine order number: 10317 Electrical schematic number: E-10317 Electrical connection value: 100 kVA Mains connection: 3-phase Mains frequency: 50 Hz Operating voltage: 400 V Control voltage: 230 V AC / 24 V DC Rated current: 150 A Intended upstream fuse: 200 A, slow-blow

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting system Perndorfer type WSS4020, table size 4000/2000 mm, high-pressure pump BFT Ecotron with 37 kW and 4000 bar cutting pressure, 3D cutting head for contour cutting. The machine is used and in good condition, and has recently undergone an overhaul by the manufacturer. The machine can be inspected and tested at any time. Dodpfx Ajx H Ny Toqvjcp

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 62005_2.0x3.0-30HP, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, total length: 3,500 mm, total width: 2,500 mm, Equipment: safety light barrier, NEC / DUAL HEAD Power Jet Systems Multi-Axis Waterjet Cutting Table Sold with x2 Digital Control High-Pressure Waterjet Pumps HP Pump Models: SX 222 V3 (Yr. 2005) Pump & SX 245 Pump (Yr. 2001) Plus, includes KMT Abrasive Hopper TWIN HEAD Industrial CNC Waterjet Cutting System: Manufactured by NEC Power-Jet Systems, this heavy-duty multi-axis waterjet cutting table is designed for precision cutting applications using pure water and/or abrasive waterjet technology. The machine features a rigid steel box-frame construction with integrated water tank, servo-controlled motion system, and industrial CNC control software. Suitable for engineering, fabrication, stone, glass, plastics, composites, rubber, foam, and metal cutting applications. Key Features: Multi-axis CNC waterjet cutting table Precision Ball Screw or Precision Rack & Pinion drive systems Linear bearing slideways Baldor digital servo motors and drive system Touchscreen operator interface Dedicated waterjet cutting software Integrated water tank/cutting table Adjustable water level system Abrasive distribution system mounted on gantry or Z-axis carriage Pure water and abrasive cutting capability Multi-head cutting configurations available Heavy-duty steel framework construction Stainless steel and anodised aluminium wetted components CAD/CAM compatibility with kerf compensation Nesting and material optimisation capability Dry-run facility and programmable jogging functions Technical Specification Construction Rigid heavy-duty steel framework Integral cutting tank and table Enclosed drive systems Cable trunking for protected service routing Local abrasive transfer unit Stainless steel and anodised aluminium wetted parts Integrated operator panel and electrical controls Motion System Precision Ball Screw drive (MaxiJet models) Precision Rack & Pinion drive (MidiJet models) Linear bearing guideways Baldor digital servo drives and motors Multi-axis configurations available: 2, 3 or 5-axis systems Software & Control Proprietary Power Jet cutting software CAD/CAM import capability Kerf compensation Material nesting and optimisation options Programmable jog speed control Djdpfx Aqoz Nll Hsvecp Home and return-home functions Dry-run programme verification Standard Machine Sizes MaxiJet: High-precision CNC waterjet table Ball screw drive system Standard cutting area: 2m x 3m Applications / Suitable for cutting: Steel Stainless steel Aluminium Stone Glass Plastics Rubber Foams Composite materials Technical engineering materials NEC Power Jet CNC Waterjet Cutting Machine | Multi-Axis Abrasive Waterjet Table | Servo Controlled Search Keywords Waterjet cutter, CNC waterjet, abrasive waterjet machine, pure waterjet cutter, Power Jet Systems, MaxiJet, MidiJet, industrial cutting table, CNC cutting machine, water jet cutting system, fabrication equipment, engineering machinery.

Condition: like new (used), Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, sheet thickness aluminum (max.): 200 mm, pressure: 3,800 bar, product height (max.): 200 mm, Equipment: safety light barrier, Selling a waterjet cutting system, manufactured by Perndorfer, model WSS XL 3015, with 2 cutting heads and cutting angle compensation, as well as a drilling spindle for pre-drilling starting points. Complete with a high-pressure pump (Servo-Jet 4000; SJ 55), abrasive material feed system, and sludge removal system. The system is in like-new condition and has been exceptionally well maintained. Unlike standard models, the cutting table is made entirely of stainless steel. Includes a device for quickly cleaning/removing the water surface when cutting plastics (or similar materials). Djdpfxoz Ikrhj Aqvjcp Includes 2 programming stations from Lantek for this machine. Complete documentation is available. Available for immediate delivery. Please contact me if you have any questions.

Condition: used, Year of construction: 2007, operating hours: 15,000 h, functionality: fully functional, working range: 4,000 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, table length: 4,500 mm, table width: 2,000 mm, tank capacity: 8,000 l, pressure: 4,150 bar, operating pressure: 3,800 bar, input current: 84 A, power: 45 kW (61.18 HP), Waterjet cutting system CMS Tecnocut IDRA (predecessor to the Idroline series) 2 x 5-axis cutting heads (only 1 head is fully operational / head 2 is functional but lacks high-pressure/sand feed) Cutting head configuration as a 2D head with a 250 mm Z-axis travel range Cutting head configuration as a 3D head with a 150 mm Z-axis travel range, A-axis travel range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control, not 2.5D like many other machines Cutting area: X-axis: 2,000 mm Y-axis: 4,000 mm Z-axis: 250 / 150 mm A-axis: +/- 274 degrees B-axis: +/- 62 degrees Details: Dedpfx Aozbz Eveqvscp - 5-axis cutting head with IKC technology (intelligent cutting head control for angle error compensation) - Anti-collision/height sensor for surface scanning - DDX EasyStone Premium software - 60 HP/45 kW Jetpower EVO pump (3-cylinder) with an output of up to 5 L/min / Maximum pressure 4150 bar / Normal operating pressure 3800 bar The machine is still in operation and connected to power until July 31, 2026.

Condition: used, Year of construction: 2013, operating hours: 4,400 h, For sale is a waterjet cutting system, STM WS 4020, in good condition, with a simple design, including a BFT Ecotron 40.37 high-pressure pump. Dcjdez Rkn Aspfx Aqvop

Condition: excellent (used), Year of construction: 2014, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 5,000 mm, total length: 8,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, working length: 5,000 mm, working width: 3,000 mm, We offer this Soitaab 3 x 5-meter cutting area waterjet cutting machine in excellent condition, featuring a bevel cutting function, manufactured in 2014. High-pressure pump: Hypertherm Hypresicion 50, 37 kW. Djdsz Ncz Dspfx Aqvjcp Manufacturer: Soitaab Model: Watertech 3050 Year of manufacture: 2014 Machine type: Waterjet cutting machine If you have any questions or require further information, please contact us via message or by phone.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar Dcsdpfxjzz Achs Aqvop

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm included options: Dcedpfxjzu R Tuo Aqvsp - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: used, Year of construction: 2006, operating hours: 107 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Dodpsy D A Ifjfx Aqvecp Delivery available on request. Sale as-is in condition shown in the pictures.

Condition: used, Year of construction: 2009, operating hours: 3,303 h, functionality: fully functional, pressure: 4,000 bar, overall weight: 990 kg, Uhde HPS 4011 High pressure pump 15 HP /HP (Pictures are condition) Dsdpfouixdcsx Aqvecp

Condition: excellent (used), Year of construction: 2019, operating hours: 288 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning accuracy: 0.01 mm, workpiece weight (max.): 1,100 kg, type of input current: three-phase, input voltage: 400 V, pressure: 4,000 bar, positioning speed: 6,000 m/min, water pressure: 4 bar, power: 37 kW (50.31 HP), Waterjet Cutting System All-Powerful Science & Technology Stock Co., Ltd APW 3015 BA Year of manufacture: 2019 Lightly used, very good condition Operating hours: 288 cutting hours, 2203 operating hours Travel distance X: 3000 mm Travel distance Y: 1500 mm Travel distance Z: 150 mm Maximum feed rate: 6000 mm/min Maximum pressure: 410 MPa (4100 bar) Continuous operating pressure: 340-360 MPa (3400-3600 bar) Swiveling cutting head, deflection range 0-10° Cutting accuracy: ± 0.1 mm The components used are from well-known manufacturers, e.g. SKF, Yaskawa, TBI Motion, etc. The high-pressure pump is from A&V Waterjet Tech Inc. USA A second, unused spare high-pressure pump is also installed. Machine dimensions, cutting table: 4200 x 2800 mm Space required for cutting table & control & pump & water filtration system and abrasive feed system approx. 6 x 5 m Dcedjzh Eq Ujpfx Aqvsp Water requirement for cutting at least 3.7 l/min, recommended 10 l/min Maximum workpiece weight: 250 kg/m² Axis drives: AC servo Pump power: 37 kW Connection: 400 V, 3-phase Special accessories, included in the price: Spare high-pressure pump Positioning laser Collision protection Air conditioning unit for oil cooling CAM software with part placement 4 clamping units 1500 kg abrasive blasting sand Removable protective covers Wastewater filtration system with filter fleece (Matchling MCL-P5N) Spare parts and wear parts set The machine is located in a precision engineering workshop. The protective covers reduce dust levels. Optional Commissioning, price based on effort Basic training, price based on effort

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 Dsdpswiatijfx Aqvecp An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, High pressure pump from PTV WJ3030B-1Z waterjet cutting machine. Pump, reducer, main motor of 37 kW, flush valve are overhauled. Dsdpfx Asyxmmzsqvocp H2O Jet intensifier 60K 301001-1-R.

Condition: excellent (used), Year of construction: 2017, operating hours: 14,052 h, functionality: fully functional, machine/vehicle number: M15305531R, repeat accuracy: 0.02 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 305 mm, positioning accuracy: 0.07 mm, workpiece weight (max.): 1,450 kg, type of input current: three-phase, input voltage: 380 V, travel speed (max.): 12,500 mm/min, MAXIEM 1530 II machine 30HP pump (22kW) Abrasive tank 1000 kg. Dcsdpfx Ajyglpcoqvjp In continuous operation, serviced every 500 hours.

Condition: used, Year of construction: 2012, functionality: fully functional, MBM ASAS ME Dedszh U Naspfx Aqvscp Pump cleaning system for Abrasve Waterjet machines Used - construction Year 2012

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 150 kg, type of input current: three-phase, input voltage: 400 V, table length: 800 mm, table width: 600 mm, table height: 100 mm, operating pressure: 4,200 bar, warranty duration: 12 months, input current: 80 A, total height: 1,650 mm, total length: 2,200 mm, total width: 1,890 mm, overall weight: 3,000 kg, input frequency: 50 Hz, Where conventional cutting methods reach their limits, our micro-waterjet cutting machines set new standards in terms of precision, angular accuracy, and process stability. Dodpoz Euxmefx Aqvecp Designed for the most demanding applications in precision machining, this system combines mechanical excellence with state-of-the-art measuring technology. The robust granite machine bed forms the vibration- and temperature-stable foundation for the highest level of sustained accuracy. In combination with contactless linear motor axis drives, traversing movements are realized with almost no friction, high dynamics, and without mechanical play. The highly efficient 5-axis tilt cutting head ensures maximum cutting quality and perfect edges by dynamically compensating for the design-related beam cone, thereby achieving an angular accuracy that is far superior to that of standard 5-axis heads. To guarantee these peak performances permanently, each system is completely measured and calibrated using a Renishaw laser interferometer before delivery. The result: Calibrated micrometer precision for your most extreme manufacturing requirements. Complete system / ready for immediate use. Leasing or hire purchase is possible through our financing partner. Do you require a different performance level or table size? – No problem, we have several machines in stock or available on short notice. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 310 mm, warranty duration: 12 months, pump pressure: 2,000 bar, power: 3.7 kW (5.03 HP), OMAX ProtoMAX® – the smallest industrial-grade waterjet cutting system in the world! Its compact design, combined with its comprehensive versatility, makes the ProtoMAX® waterjet cutting system a perfect solution for applications such as the production of small batches and prototypes, as well as for educational purposes. Furthermore, the ProtoMAX® can also be used as a complement to larger waterjet cutting systems. Thanks to its small footprint, the ProtoMAX® waterjet cutting system is ideally suited for smaller spaces. Mounting the system on rollers allows for easy and straightforward relocation. Dcedey Umphopfx Aqvop ✔ 3.7 kW pump with 2,000 bar operating pressure ✔ Cutting thickness up to 25 mm for a wide range of materials ✔ Efficient and reliable pump technology with direct drive ✔ Includes laptop with pre-installed CAD/CAM software ✔ Quiet and clean underwater cutting (< 76 dB) ✔ Protective cover with safety switch ✔ Clamping device for securing the material A timely delivery can be arranged with INNOMAX AG. This is a demonstration machine.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 57 h, number of axes: 5, This 5-axis MAVIJET MJT-W53D-4020 was manufactured in 2020, featuring a CNC 5-axis, bridge type design for precision waterjet cutting. It includes a high-pressure pump operating at 4000 bar and a rapid traverse speed of 30000 mm/min. The machine supports a cutting size of 4000 × 2000 × 250 mm and is equipped with a smart abrasive reserve tank. If you are looking to get high-quality cutting capabilities, consider the MAVIJET MJT-W53D-4020 machine we have for sale. Contact us for more information. Additional equipment • Smart Abrasive Reserve Tank Included • Tank Capacity: 350 kg • Tank Pressure: 6 bar • Sand Dosing System: Adjustable via CNC (flow 50–1000 g/min) Machine Benefits Technical Machine Benefits • Axes: 5-axis waterjet cutting machine • Cutting size: 4000 × 2000 × 250 mm • Type: cnc 5-axis, bridge type • Step accuracy: 0. 01 mm • Controller: esa 5-axis controller with ethernet, usb, and manual handwheel (x/y/z) • Cam program: semi-automatic nesting / automatic input-output system • Rapid traverse speed: 30000 mm/min Extra Information Condition: Very good technical condition, low number of working hours Movement Axis Motors: X-axis: 1 × 3.2 Nm servo motor Y-axis: 2 × 3.2 Nm servo motors Z-axis: 1 × 1.6 Nm servo motor with brake A-axis: 1 × 1 Nm servo motor with brake Dcsdpfxszbcmhs Aqvep C-axis: 1 × 1 Nm servo motor with brake Transmission System: Helical hardened racks and pinions Linear Bearing: THK linear slides and rails Injection Unit High Pressure Pump: MJT-4000 Operating Pressure: 4000 bar constant (24h non-stop) Motor: 50 HP / 37 kW, 1500 rpm, 50/60 Hz High Pressure Flow Rate: 2.3–3 L/min Pressure Adjustment: 1000–4000 bar in 500 bar steps Orifice Diameters: 0.18 / 0.25 / 0.30 / 0.35 mm Hydraulic Pump: 71 cm³ (103 L), axial piston pump max. 200 bar Cooling Water Flow: 30 L/min Optimum Water Inflow: 4 bar Adjustable Pressure Water Pump: 10–16 bar

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. Djdpfx Aqsi Hckrevscp The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: excellent (used), Year of construction: 1999, operating hours: 34,675 h, power: 36.77 kW (49.99 HP), Here we offer you a KMT SLIV 50 hp pump for hire. You can test this pump or bridge a breakdown of your pump for only 450 € per week. plus shipping and installation For purchase in current condition we offer you the pump for 12.500 € with overhaul / refurbish between 25.000 € and 35.000 € We are happy to advise you. Oil/air cooling available We offer a discount when concluding a maintenance or service contract! Dodpfsrx Stqex Aqvocp Contact us and we will make you a customized offer!

Condition: used, Year of construction: 2017, x-travel 2010 mm y-travel 3010 mm z-travel 200 mm Capacity 4000 bar table load 1200 kg/m2 Dedpfx Aezmitkjqvscp feed 10/5 m/min Table 3000 x 2000 mm control FANUC dimensions of the machine ca. 10,3 x 4,2 x 3,25 m used CNC water cutting machine in gantry style - high pessure pump 4000 bar - cutting tool WJS Basic cutting head, abrasiv dosing device - CAD/CAM software IGEMS 2D CAD, 2D CAM and AWJ modul - pressure vessel 200 ltr./ abrasive tower 1 tonne - abrasive controling package - abrasive disposal package - Remote control software - collision protection package - nesting level 1 + 2