Used Welding tables for sale (579)

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control Iodpfx Aasxabm Necetn - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: new, table length 2990 mm Itodpfexpxrhsx Aacsn table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm.

Condition: new, Year of construction: 2025, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 Iedpfx Aajvvx Hpecotn • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2025, – Horizontal capacity: 1200 kg – Vertical load capacity: 600 kg – Table size: 1000 mm Itsdpfx Asliftnjacjn – Electrically tiltable – Cable remote control – Digital display – Documentation – 400V

Condition: refurbished (used), Year of construction: 2010, HOLTEC log infeed LINCK infeed EV40 LINCK V40 LINCK turning device DV55 LINCK infeed EV30 LINCK V25 Itedexpt Hgspfx Aacjn LINCK double profiling unit VPP34 LINCK circular saw VS66 LINCK board separator SEA LINCK turning device DV35 LINCK centering device ZZP LINCK double profiling unit VP34 LINCK circular saw MKV LINCK SEK splitter wedge

Condition: new, Year of construction: 2022, functionality: fully functional, Brand New Nimo-KG SKV 300 C4 meat bin lifter year of construction 2022 Tipping height 183 cm. Isdpfx Ajxl Tvgsacetn

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. Isdpsgvkc Njfx Aacotn The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 850 - 900 mm weight of the machine ca. 0,65 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 Iedsxpxrbspfx Aacstn The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.4 mm over 1000 mm. The table can be moved with a pallet truck. Pallet truck is not included.

Condition: new, Year of construction: 2025, table length 1000 mm table width 2000 mm table height 200 mm weight 650 kg Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving Itjdpfsuia Nasx Aacon • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: used, Year of construction: 2012, Welding Rotator SAF ROTOMATIC ST6W - No 1 Rotation: from 12 to 120 RPM Max Year of construction: 2012 Iedpfxsxnibde Aacotn Maxi loading capacity: 6 T Trainer dimensions: L 2100 mm x W 800 mm x H 400 mm Simple rotator dimensions: L 1900 mm x W 300 mm x H 400 mm Mini ferrule diameter: Ø 300 mm Maxi ferrule diameter: Ø 300 mm Rotation by speed variator Voltage: 380 V Drive wheels dimensions: Ø 250 x W 80 mm Weight: approx 300 kg

Condition: new, table diameter 490 mm Itsdpfxegvkkto Aacjn table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: used, Year of construction: 2008, table diameter 1100 mm table load 1,2 t swivelling range 0 - 135 Grad turning speeds 0,15 - 3,4 U/min Isdpjxpi Akofx Aacstn table height adjustment von 780 bis 1560 mm max. torque on the faceplate 1300 Nm Dimensions (LxWxH) 2,8 x 1,6 x 1,6 m Welding turntable with new remote control • Self-locking gear system, no pre- or post-running under eccentric loads • Hydraulic height adjustment allows for virtually unlimited positioning • Frequency-controlled, infinitely variable speed of the rotary table

Condition: new, Year of construction: 2025, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 Iodjuia I Nepfx Aacjtn • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t Itjdsibw Sxjpfx Aacsn - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Itedpfx Aasgvkikocen Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t Itodogvkfvspfx Aacen The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm Itsdpfegvkfyex Aacjn table height 200 mm weight of the machine ca. 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction Itedpfx Aaogvkgtecon and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Ijdpfx Asgvkk Noacstn Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW Iodoh Evt Ujpfx Aacjtn The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t Itodpfx Asgvkc Teacon The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm Isdpegvkf Dofx Aacetn - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation Itsdpogvq Hljfx Aacsn - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! !! SPECIAL OFFER !! SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm - Side panel holes in diagonal grid - Construction reinforced with ribs - Grid lines enable precise assembly The welding tables are equipped with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: Itedpfx Aexflfteacjn - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version with scale - Includes 4x feet Basic equipment - Includes accessory set (see image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t Iodpfxsgvkdbo Aacstn The table Professional Extreme Article no. 7D 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X