Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control system: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Ihjdpfjyqx T Aox Aaljw Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip ejection power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7243

Condition: ready for operation (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 20190824, feed rate X-axis: 33 m/min, overall weight: 2,800 kg, rotational speed (max.): 6,800 rpm, workpiece height (max.): 100 mm, workpiece width (max.): 180 mm, Four-side planer with only 100 operating hours! TECHNICAL DETAILS Material width: 20-180 mm Material thickness: 8-100 mm Infinitely adjustable feed speed: 8-33 m/min Spindle diameter: 40 mm Spindle 1 - bottom: Ø125 mm (Ø152 mm groove cutter), 4 kW Spindle 2 - right: Ø115-170 mm, 4 kW Spindle 3 - left: Ø115-170 mm, 4 kW Spindle 4 - top: Ø105-150 mm, 5.5 kW Spindle speed: 6,800 rpm Roller feed system dimensions: Ø140x35x50 mm Extraction connection diameter: 4 x 120 mm MACHINE DETAILS Feed motor power: 3 kW Total electrical connection load: 21 kW Operating voltage: 400 V, 50 Hz, 3-phase Required air pressure: min. 6 bar Dimensions & Weight Dimensions (L x W x H): 3,040 x 1,600 x 1,680 mm Ihsdpfx Aeyu Ii Isaljw Weight: 2,800 kg Feed table length: 2,000 mm Operating hours: 100 h EQUIPMENT Solid cast and welded steel frame Chromed worktable for secure material feeding Side guide rollers for material with pneumatic drive Professional cardan shaft drive for the feed system Manual central lubrication unit Radial and axial adjustment of working spindles with mechanical indicators for precise positioning Electric adjustment of working height Ergonomically positioned control panel according to EU standard

Condition: excellent (used), Set of 2x Weinig Powerlock L=310 Z=2 heads 8000 rpm Isdpfx Aasyvrwgjljhw Alu Lightweight Diameter 125 mm 1x bottom + 1x top Weinig 10025811 (20 05 071) Weinig 10025812 (20 05 070) Centrolock reversible knife system Z2 Mounting: PowerLock HSK

Condition: excellent (used), Set of 2x Weinig Powerlock L=210 Z=2 heads Alu Lightweight Diameter 125 mm 1x left + 1x right Weinig 10025808 (20 05 073) Weinig 10025810 (20 05 072) Centrolock reversible knife system Z2 Mounting: PowerLock HSK Isdpfx Aaoyvq N Ujlohw

Condition: used, Year of construction: 1996, Price: On request Double-sided planer REX HOMS 630 Serial No. 16831 380V, 102.6Amp 67.5HP Equipped with 3 planing shafts 1st under 15kW 2nd under 11kW 3rd above 18.5kW Max planing width 630mm Min-max planing height 10-310mm Max chip removal upper planing shaft 15mm Iodpfx Aswng Ikealehw Max chip removal lower planing shaft 10mm - Year: 1996 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: refurbished (used), 1 x Elektronic Motor Braking Unit Power range 3 - 15KW Voltage range 200-575V Power frequency 50Hz/60Hz Siemens EMG 15 Iedpfx Aaeyvhftolohw

Year of construction: 2021, condition: as good as new (ex-display), Due to order cancellation 2 x new Tersa planing heads D140x130x50 All original Swiss Made. It doesn't get any cheaper! Isdpfx Ajyvhcrealohw One-time super cheap set offer

Condition: like new (used), Year of construction: 2005, functionality: fully functional, working width: 230 mm, planing height: 120 mm, planer shaft diameter: 40 mm, workpiece height (max.): 120 mm, Weinig Unimat 300 — 4-sided planer 230 x 120 mm Although from 2005, this machine is practically like new! Rarely have we seen one so little used. Looking for an almost-new 4-spindle planer but don’t have the budget for a new one? This Unimat 300 is the perfect pick! Ihedeyvhcfspfx Aalew

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Ihsdpfxoyvhbnj Aalow Latest generation IE-3 motors Spindle and feed brakes CE

Condition: used, Year of construction: 2015, total width: 1,150 mm, total height: 1,450 mm, Weight: 1.100 kg Dimensions (LxBxH): 215 x 115 x 145 cm Price: On request - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 932015 - Max. planing width [mm]: 530 - Min. planing height [mm]: 3 - Max. planing height [mm]: 300 Ihsdpsyvf Nujfx Aaljw - Max. planing depth [mm]: 12 - Planing shaft speed [rpm]: 5000 - Max. feed speed [m/min]: 25 - Voltage [V]: 400 - Current consumption [A]: 20 - Fuse [A]: 32 - Power [kW]: 6.5 - Transport dimensions: 2150mm x 1150mm x 1450mm (l x w x h) - Transport weight [kg]: 1100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, total width: 900 mm, total height: 1,250 mm, Weight: 800 kg Dimensions (LxBxH): 130 x 90 x 125 cm Price: On request - Details: - └ Description: Bearings sound bad - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 63CE00007-8 - Max. planing width [mm]: 630 - Min. planing height [mm]: 2 - Max. planing height [mm]: 288 - Worktable length [mm]: 860 - Worktable width [mm]: 630 - Planer block diameter [mm]: 100 - Number of cutters [pcs.]: 4 - Number of cylinders height adjustment [pcs]: 4 - Extraction nozzle diameter [mm]: 160 - Height adjustment: Manual Ihjdpsyu Sd Aofx Aalow - Options: Braked motor, Digital readout - Voltage [V]: 400 - Current consumption [A]: 17.5 - Fuse [A]: 32 - Transport dimensions: 1300mm x 900mm x 1250mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 1982, Gebr. Martin Thicknesser Type: T 42 Year of construction: 1982 planing width 630 mm planing height 250 mm Feed rate 8-20 m/min Suction nozzle 160 mm Ijdpfx Aajt U Rn Solehw Weight approx. 870 kg Rubberized infeed and outfeed roller Two-knife shaft with strip planer knives Central lubrication Planing height via handwheel adjustment Star-delta switch Location: ex stock 54634 Bitburg: - immediately available -

Condition: excellent (used), Year of construction: 1998, TECHNICAL DATA - Max. working width: 230 mm - Max. working height: 130 mm - 5 spindles: 1) Lower horizontal spindle, 230 mm, 4 kW 2) Right vertical spindle, 130 mm 3) Left vertical spindle, 130 mm (2nd and 3rd spindle), 7.5 kW 4) Upper horizontal spindle, 230 mm, pneumatically adjustable front/rear 5) Lower horizontal spindle, 230 mm, 4 kW - All spindles adjustable (up/down, right/left) - All spindles with electric brake - 4 upper feed rollers, toothed, 2 of which are double - 2 upper outfeed rollers, rubber-coated and smooth - Feed via cardan shaft - Feed motor: 2.2 kW - Operating pressure: 6-10 bar - Planing thickness adjustment - Table lubrication Iedpfxoyutyfo Aalshw - Infeed table length: 1980 mm - Extraction port diameter: 5x140 mm - Dimensions (L/W/H): 4000 x 1800 x 1700 mm - Weight approx. 3,300 kg Ex works - Available at short notice -

Condition: good (used), Year of construction: 2020, functionality: fully functional, Length approx. 2250 mm, width/depth approx. 1370 mm Weight approx. 695 kg, Jointer: Maximum chip removal 5 mm Extraction connection: Extraction nozzle Ø120 mm Thickness planer: Working height min. 3 mm Working height max. 240 mm Minimum workpiece length 220 mm Maximum chip removal 5 mm Drive motor power 7 kW Connection voltage 400 V Mains frequency 50 Hz Planer shaft type TERSA 4 planer knives Speed 5000 rpm Maximum planing width 520 mm Isdjykaqcepfx Aalohw Feed: Feed speeds 5/8/12/18 m/min Very good condition Available around September 2026 Shipping possible at extra cost!

Condition: good (used), Year of construction: 1994, functionality: fully functional, 4-knife cutterblock, 8 kW, infinitely variable feed, electric height adjustment with digital display, planed table, table rollers, planing height 300 mm, good condition. Transport possible at extra cost! Iodpjybqn Hefx Aalehw

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02-84-022, power: 37 kW (50.31 HP), 4-SIDE PLANER/MOULDER, 4 CUTTERHEADS + UNIVERSAL SPINDLE, 2.5M TABLE & HEAVY-DUTY MOTORS Brand: CASADEI Model: MATRIX 4+1 Serial No.: 02-84-022 Year: 2002 WORKING CAPACITY (thickness x width): 6 to 155 x 25 to 230 mm - 4-sided planer and moulder - Working width: 25 to 230 mm - Working height (timber thickness): 6 to 155 mm - Max. finished timber section: 155 x 230 mm - Min. working length: 480 mm - Adjustable cutting depth: max 10 mm - Spindle rotation speed: 6,000 rpm PLANER/MOULDER CONFIGURATION: - Sturdy welded steel frame - Soundproof panoramic hood with gas struts Ihsdpfx Aaju Sr Ivjlow - Raised operator control panel - 2,500 x 250 mm steel infeed table Floor height: 880 mm Side-entry spring-loaded feed roller Manual table lubrication unit after surfacing 1) Bottom horizontal spindle 5.5 kW TERSA cutterhead Ø125 x h.240 mm 1 retractable vertical roller presser 2 & 3) Right then left vertical spindles, 1 x 7.5 kW each TERSA cutterheads Ø125 x h.165 mm 4) Top horizontal spindle 7.5 kW TERSA cutterhead Ø125 x h.240 mm Adjustable exit pressure pad 5) Universal spindle 7.5 kW Ø 40 x 255 mm 1 retractable horizontal roller presser FEED SYSTEM: - Variable feed speed: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) - 8 independent pneumatic feed rollers: 2+2 grooved steel, then 2+2 rubber-coated OTHER SPECIFICATIONS: - CE marking - Power supply: 380V, 3-phase, 50 Hz - Lockable main switch, automatic star-delta starters Emergency stops front/rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors - Cardan shaft spindle drives - Digital readouts (Siko-type counters) for precise manual adjustment of each operation - Electric raise/lower beam for thickness adjustment, Raise/lower motor: 0.37 kW - Axial spindle adjustment: Bottom horizontal: 0 to 15 mm Top horizontal: 0 to 25 mm Verticals: 0 to 25 mm - Acceptable cutter/tool dimensions: On bottom horizontal spindle: Ø 120 to 140 mm Profiling on vertical spindles: Ø 100 to 180 mm Profiling on top horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø140 x 12 x 40 mm - Recommended pneumatic supply: 7 bar Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connector: 1/2" G - Dust extraction, central upper port: Ø250 mm Required air speed: min. 25 m/sec Airflow: 4,500 m³/h - Technical manual included. - Machine fitted with 4 TERSA shafts Footprint: 4,700 x 1,700 x h.1,800 mm Weight: 2,240 kg Please contact us for supply of consumables, accessories, and/or extraction systems.

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, Ihjdpfx Aaeu R Sz Tolsw helical toothed infeed roller ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - Ihodpfju R S Awsx Aalew ----- Technical data ----- Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, Ihjdpfx Aaeu R Sztolew table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 226-60368, total width: 2,200 mm, total height: 2,000 mm, total length: 4,500 mm, overall weight: 4,000 kg, WEINIG PROFIMAT 23 Four-Side Planer - Operating voltage: 380 V - Frequency: 50 Hz - Spindle length – working spindle: 247 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Tool length – surfacing spindle: 240 mm, jointer spindle: 130 mm, left spindle: 130 mm, top spindle: 240 mm - Spindle diameter on surfacing, jointer, left, and top spindles: 40 mm each - Adjustment travel (axial): 5 mm, radial: 15 mm; jointer spindle: 40 mm axial, 50 mm radial; left spindle: 40 mm axial, 200 mm radial; top spindle: 40 mm axial, 120 mm radial - Max. cutting circle behind fence: 200 mm - Max. cutting circle – working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm - Distance below table, working spindle: 20 mm, jointer spindle: 15 mm, left spindle: 15 mm - Minimum cutting circle diameter, working spindle: 125 mm, jointer spindle: 100 mm, left and top spindle: 100 mm - Maximum cutting circle diameter, working spindle: 145 mm, jointer spindle: 200 mm, left spindle: 200 mm, top spindle: 200 mm - Spindle speed on all spindles: 6,000 rpm - Extraction connection on all spindles: 140 mm - Max. chip removal on all spindles: 10 mm - 2nd bottom spindle – clamping length: 240 mm, tool length: 240 mm, spindle diameter: 40 mm - Adjustment travel: 35 mm axial, 68 mm radial - Max. cutting circle below table: 200 mm, min. 18 mm - Cutting circle diameter: min. 100 mm, max. 200 mm - RPM: 6,000 - Motor power: 4 – 11 kW - Extraction diameter: 140 mm - Chip removal: from 0 to 0.5 mm - Surfacing table length: 2000/2500 mm Iodpjyu Iwljfx Aalshw - Surfacing table adjustment range, up/down: 10 mm - Jointers fence adjustment range: 10 mm Attention: The item must be collected bindingly between 01. and 10.06.2016, on a date to be arranged. FCA D-75433 Maulbronn – loaded onto truck

Condition: excellent (used), Year of construction: 2006, Thickness planer Manufacturer: Martin Iodoyvq Htepfx Aalehw Model: T45 Year of manufacture: 2006 Planing width: 630 mm Planing height: 2.8 - 300 mm Power: 5.5 kW Number of knives: 4 Knife type: Tersa 1 piece rubber infeed roller 1 piece rubber outfeed roller Height adjustment: Electric Feed speed: 6/12 m/min Table length: 1,260 mm Speed: 5,000 rpm Weight: approx. 1,300 kg

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, power: 5.5 kW (7.48 HP), planing width: 500 mm, Thickness planer Manufacturer: SCM Ijdpfoyu N Uljx Aalshw Model: S 50 Motor: 5.5 kW 4-knife cutterhead Feed speed: 7.5–25 m/min Planing width: 500 mm Planing height: 240 mm 2 rollers in the table

Condition: new, planing width: 335 mm, Replaceable knives for planer – Manufacturer: Kanefusa, for Marunaka planer with reversible knife system, length 335 mm, set of 2 pieces. Ihodpfx Ajym Sc Ajalsw

Condition: new, - Large jointer tables made of cast iron - The jointer table adjustment is controlled via a precise parallelogram system, ensuring that the distance from the table tips to the cutterhead remains constant in every position - The large, stable fence made of anodized aluminum is easily movable and tiltable from 0° to 45° - The fence angle is readable from the working position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision engineering and heavy cast construction - Powerful industrial motor - Maximum user safety combined with the simplest operation - Chip removal display via scale - Manual table adjustment - Motor protection switch Ihsdpfx Asu T Hrcsalow Equipment Details -Includes foldable auxiliary fence for narrow workpieces -Manual quick adjustment for chip removal with scale and rotating knob Safety Guard -The safety guard is foldable and designed to provide operator protection without hindering work TERSA Models with Tersa Cutterhead System -No setting or screwing required -Cutter knives can be changed in seconds -Self-locking -Especially quiet operation -Perfect planing results This product comes with the 3-year Stürmer warranty upon online registration. Warranty only applicable to end customers in Germany and Austria. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3 - PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weight: - Product length approx.: 2750 mm - Product width/depth approx.: 1500 mm - Net weight approx.: 680 kg Jointer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. depth of cut on jointer: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90 – 45° Connection for extraction: - Extraction port diameter: 120 mm Setup Information: - Footprint length: 2750 mm - Footprint width/depth: 1604 mm - Footprint explanation: Dimensions reflect maximum travel or usable lengths. Electrical Data: - Main motor power: 7 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm

Condition: new, - Sturdy steel and grey cast iron construction - Large, ribbed planing tables made of cast iron - Smooth operation due to high own weight - Four feed speeds - Motorized thicknessing table adjustment with two speeds and digital readout - Segment pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical gear steel infeed roller for particularly consistent and gentle timber feed - Outfeed roller with rubber coating - Large alloyed fence, tiltable from 90° to +45° - Auxiliary fence included as standard - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the jointer table - The extraction port position remains the same for both planing and thicknessing; no need for additional extraction hoses or awkward repositioning around the machine This item is covered by the 3-year Stürmer warranty with online registration. Warranty is valid for retail customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3 – PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product): approx. 2300 mm - Width/depth (product): approx. 1100 mm - Net weight: approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Jointer table width: 520 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90° – 45° Dust extraction connection: - Extraction port diameter, thicknessing: 120 mm Installation information: - Required length: 2300 mm - Required width/depth: 1610 mm - Explanation: Dimensions account for maximum travel and usable length - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Note: Please add the specified working area dimensions to the required machine footprint to determine the recommended free installation space Thicknesser: - Thicknessing table width: 520 mm - Min. working height: 3.5 mm Ihjdpfsu T Hq Sox Aalew - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical data: - Main drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer cutterblock: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min