Used Inos for sale (131)

Year of construction: 2012, condition: good (used), Item: inos iSENS laser sensors with control unit, cable, and PC interface Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone. Cedpfszdn T Rex Ad Ishc

Condition: used, This listing is for a Metrohm 719S Titrino with 20ml burette and 728 Stirrer Cjdpfx Aexzg Iued Ishc

Condition: used, Year of construction: 2019, Overview Complete 10 hl craft brewery around a BBC INOX Essential 1000 steam-heated two-vessel brewhouse, installed in 2019. One package from milling to bottling: brewhouse, hot liquor, wort cooling, steam and water treatment, fermentation with glycol cooling, filling, labelling and capping, a walk-in cold room for bottle conditioning, plus handling and cleaning equipment. Suited to a new brewery or a brewpub moving up to 10 hl; fermentation capacity can be extended. Technical data - Brew length: 10 hl (1,000 L) per brew - Brewhouse: 2 vessels, AISI 304, steam-heated - Fermentation: 3 x 18 hl gross (approx. 15 hl working), AISI 316, atmospheric - Cellar output: approx. 700-800 hl/year with 3 fermenters on 3-week cycles - Year: 2019 Scope of Delivery - Brewhouse | BBC INOX | ESSENTIAL 1000 | mash/boil kettle 1,600 L, steam-heated, whirlpool inlet; lauter tun 1,300 L with false bottom and rake; AISI 316 wort pump, grant, platform and stairs; control panel with 15 recipes | 2019 - Hot liquor tank | 2,000 L | AISI 304, internal steam coil, CIP spray ball, manway, level gauge, pump; approx. H 3,100 x D 1,270 mm - Plate heat exchanger | Kelvion | NT 25 PH | AISI 316 plates, 2,000 L/h, wort 98 to 12.8 °C - Cylindro-conical fermenters, 3 units | BBC INOX | 18 hl | AISI 316, 60° cone, dual-zone glycol jackets, individual temperature controllers, CIP spray ball, sampling valve - Glycol chiller | outdoor monobloc, glycol down to -5 °C, buffer tank and circulation pump - Steam generator | process steam for brewhouse and hot liquor tank - Water softener | ion-exchange column with brine tank - Bottling / priming tank | BBC INOX | AISI 304/316, polished, level gauge - Linear gravity bottle filler | 6 filling spouts, 480 L/h, 33 / 50 / 75 cl, AISI 304 on trolley - Semi-automatic labeller | OMB | front and back label on round bottles, photocell, 230 V | 2019 - Crown capper | AIR-MATIC | pneumatic column capper, 26 / 29 mm crowns - Walk-in cold room | 5.30 x 3.10 x H 2.50 m, dismountable panels, +2 to +10 °C - Malt mill | two hardened-steel rollers, adjustable gap, 25 kg hopper, 1.5 kW - Digital floor scale | stainless steel low-profile platform, tare and dosing - Semi-electric stacker | Jungheinrich | HC 110 | 1,000 kg, lift height 1,600 mm, 12 V, integrated charger | 2019 - Manual hydraulic stacker | BASIC | D 1025 | 1,000 kg, fork lift 85-2,500 mm - Floor scrubber-dryer | Lindhaus | LW 38 PRO - Stainless steel workbench | AISI 304, 200 x 70 x H 85 cm - Wire-mesh storage baskets | foldable, stackable, 112 x 77 x H 95 cm Chsdez E U Dispfx Ad Ioc - Food-grade hoses and stock | hoses with DIN fittings; approx. 1,600 empty bottles, 250 cartons, 3 x 20 L kegs, 2,000 crown caps Condition Used, visually very good, clean installation, still installed and under power. The fermenters are atmospheric: carbonation by bottle conditioning or via an additional pressure tank. Chiller, cold room and steam generator must be disconnected by certified technicians. Availability Immediately. Location: Italy. Dismantling and loading by the buyer. The brewhouse, hot liquor tank and heat exchanger are also available as a separate package.

Condition: excellent (used), The following HWR components are for sale, among others: Chuck jaws and centering devices • 1 INOFlex VL120, 4-jaw manual chuck, Ø 1,150 mm, Art.-No. 846120 • 1 INOFlex VL060, 4-jaw manual chuck, Ø 600 mm, Art.-No. 846060 Chjdpfx Adez Ira Ts Iec • 1 INOFlex VF026, self-centering 4-jaw centering device, Ø 260 mm, Art.-No. 842026 INOZet pivoting bridges • 1 set WT063-4-WV25, clamping range Ø 270–630 mm, Art.-No. 750180 • 1 set WT120-4-WV83, clamping range Ø 600–1,200 mm, Art.-No. 750181 • 1 set WT063-4-WV24, clamping range Ø 182–630 mm, Art.-No. 750179 Gripper jaws and adapter jaws • VR16, reversible gripper jaws for VL060/VL070/VL080, Art.-No. 850016 • VP17, soft adapter jaws, Art.-No. 851017 • WR16-8, reversible gripper jaws for INOZet pivoting bridges, Art.-No. 760162 • WP16-8, soft adapter jaws, Art.-No. 770117 • WP25-8, soft adapter jaws, Art.-No. 770126 • VR12, reversible gripper jaws for VF026, Art.-No. 850012 Movable jaws and fixed stops • VCF120, fixed stops, Art.-No. 854016 • VCB120, movable jaws, Art.-No. 854018 • VCF070, fixed stops, Art.-No. 854006 • VCB070, movable jaws, Art.-No. 854007 • VCB026, movable jaws, Art.-No. 854019 • VCF026, fixed stop jaws, Art.-No. 854020 • VCB028, movable jaws, Art.-No. 854029 • VCG026, movable, reversible jaws with gearing, Art.-No. 854033 In addition, various related T- and double T-slot nuts, fastening screws, and other accessories are available. Total net new price: 117,000 EUR Purchases were made in 2021 and 2023. The attached images provide an initial overview of the available components.

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Specifications: Capacity: 13,400 L Internal Pressure: 2 bar Internal Temperature: 200°C Jacket Pressure: 16 bar Jacket Temperature: 200°C Legs/Lugs/Mounting Ring: Mounting Ring Chjdpfoy Ryrnsx Ad Ijc

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Codpfx Ajvbdyxsd Iehc Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2017, Overview Complete dressing line for sparkling wine in 750 ml glass bottles, rated at 5,000 bottles/h. The line runs from bottle washing and drying through capsuling and labelling to tray forming, wrap-around packing and vertical packing, linked by approximately 50 m of bottle conveyors, tray conveyors and two accumulation tables. The labelling machine dates from 2017, the packaging end from 2002 and the bottle washer-dryer from 2005. The line is still in production and can be visited on request. Technical data - Year of manufacture: 2017 (labelling machine); remaining machines 2002 to 2005 - Output: 5,000 bottles/h - Product: sparkling wine - Bottles: glass, 750 ml - Bottle conveyors: approx. 50 m total length - Accumulation tables: 2 - Electrical cabinet with power supply and automation included Scope of Delivery - Bottle washer and dryer | CAMES | WDT-12 | 2005 - Capsuling machine | Robino & Galandrino | ZENITH Z 2/16 OTTICO | 2004 - Labelling machine | Sacmi | KUBE K60 | 2017 - Tray former | CERMEX | F28.40 | 2002 - Tray former | CERMEX | F28.40 | 2002 - Bottle deviator | CERMEX | 2002 - Vertical packer | CERMEX | AN90 | 2002 - Wrap-around packer | CERMEX | WB45.00 | 2002 - Laser coder | LINX | SL301 Chsdpfx Adez Dtyme Ijc - Hot-melt unit | Nordson - Bottle conveyors | Bobard, Thierion, Anduze | approx. 50 m total length | 2017 - Tray conveyors - 2 accumulation tables - Electrical cabinet with power supply and automation Condition In production. Inspection on site by appointment. Availability Available from 29 January 2027. Location: France.

Condition: like new (used), Year of construction: 2023, Inotec I225-iT5-160D Emulsifier INOTEC emulsifiers are used for the production of fine minces in the meat industry and for the production of fine emulsions of meat, vegetables, and fruits for baby food and hospital food, for confectionery, for the production of processed and analogue cheese products, and for pet food. Chsdpfx Adszwkv Uj Isc Manufacturer: Inotec Model: I225-iT5-160D Year: 2023 Capacity: 15,000 kg/hour (depending on the product) Hole plate diameter: 225 mm Power: 400V / 50Hz / 180kW Machine dimensions (LxWxH): 2,000 x 1,300 x 1,800 mm Machine weight: 2,000 kg. Inotec IFP 15 Product Pump Manufacturer: Inotec Model: IFP 15 Year: 2018 Power: 400V / 50Hz / 20kW Machine dimensions (LxWxH): 3,000 x 1,900 x 1,620 mm Machine weight: 2,000 kg.

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 559 mm, travel distance Y-axis: 559 mm, travel distance Z-axis: 599 mm, spindle speed (max.): 14,000 rpm, number of slots in tool magazine: 60, number of axes: 5, This 5-axis Makino A51-5XR HMC was manufactured in 2013. It features a generous travel of 22" x 22" x 23.6" and is equipped with a 60-tool automatic changer and a spindle speed of 14,000 RPM. If you are looking to get high-quality machining capabilities, consider the Makino A51-5XR horizontal machining centre we have for sale. Contact us for further details. Additional equipment Chedpfxsz Aqu Ij Ad Ijc • Chip conveyor • Cooling unit

Condition: excellent (used), The machine is ready for operation; it was used for harvesting carrots. Its capacity is up to 25 tons per hour. Chjdoytnhujpfx Ad Ijc Please check out my other listings.

Condition: used, Year of construction: 1989, Capsule type: champagne cap folding capacity / hour ca.: 3000 working direction: left-right Working type: fullautomatic Dim. L x W x H [m]: 1,40 Cedpfjz Ibr Esx Ad Iohc amount of capping heads: 3 electrical power supply kW: 380

Condition: used, Year of construction: 2017, - Brand: Dinolift - Type : 260XTD - Year built: 2017 - Hours: 4167 - Weight: 3495 kg. - Working height: 26 meters - Lateral reach: 12 meters - Dutch license plate - 72-WR-NJ - Drive: Diesel + 220 volts - Movers / wheel drive - Safety inspection valid until Aerial work platform book available - CE document available - Machine is very neat - From 1st owner - Video on our website - Trade-in and transport possible * Brand: Dinolift *Type: 260XTD * Construction year: 2017 * Hours: 4167 * Weight: 3495 kg. * Working height: 26 meters Chedpfx Adox H Av Uo Ioc * Lateral reach: 12 meters * Drive: Diesel + 220 volts

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, Longitudinal seam, folding base, double edge, 4 + 6-point gluing, electronic top gluing system HHS X-tend² with 6 applicator heads, lower gluing system on the left side, mechanical overlap folding with timed/chain alignment, vibrator with compressed air at the feeder, toothed gauge at the feeder, additional center transport in the pre-breaker, pre-breakers on the right and left, kicker, counter, additional center transport in the folding section, Dünki silicone tape dispenser, pneumatic, timed press belt. The machine is in very good condition and can be inspected (disassembled). Max. 1100 mm, min. 126 mm. Chodeztq Ezjpfx Ad Iec

Condition: used, Year of construction: 2004, Overview This Robino & Galandrino ZENITH Z 2/16 OTTICO is a rotary capsuling machine for sparkling wine bottles, built in 2004. It places and crimps capsules onto 750 ml glass bottles, with optical spotting so that a printed capsule is aligned to the bottle before crimping. The machine is laid out as a two-turret unit: a capsule distributor turret feeding a 16-head rotary crimping turret, rated at 12,000 bottles per hour. It is still installed and under power, remains in production until end of January 2027, and can be visited in operation on request. Technical data - Manufacturer: Robino & Galandrino - Model: ZENITH Z 2/16 OTTICO - Year of manufacture: 2004 - Machine type: rotary capsuling machine for sparkling wine bottles - Configuration: 2 turrets, 16 crimping heads - Capsule spotting: optical - Capacity: 12,000 bottles per hour - Container: glass, 750 ml sparkling wine bottles Codpfx Asz Dtndod Iohc - CE marked Equipment - Automatic capsule magazine with inclined slat elevator feed - Optical spotting station for pre-printed capsules - Full safety enclosure with transparent doors and emergency stops - Bottle infeed and discharge handling with star wheels and guide rails Condition Used - still installed and under power, in production at the current site. Availability From end of January 2027. Location: France. Sold EXW; dismantling, handling and truck loading are not included.

Condition: used, Year of construction: 2006, - Brand: Hinowa - Type: Goldlift 14.70 - Year of construction: 2006 - Weight: 1700 kg. - Hours: 2395 hours - Working height: 14 meters - Lateral reach: 7 meters - Lifting capacity: 200 kg. - Drive: Petrol + 220 volts - Adjustable tracks - Safety inspection valid until 19 Aerial work platform book available - CE document available - Machine is in very neat condition !! - Possibly with machine transporter € 2950,- Chodpfx Adjy Itudj Iec - Video on our website - Trade-in and transport possible * Brand: Hinowa * Weight: 1700 kg. *Type: Goldlift 14.70 * Construction year: 2006 * Hours: 2395 uur * Working height: 14 meters * Lateral reach: 7 meters * Lifting capacity: 200 kg. Aerial work platform book: Yes * Drive: Petrol + 220 volts CE document: Yes Video on website: Yes Safety inspection: Yes

Condition: like new (used), Machine ready for operation Year of manufacture: 2014 Manufacturer: Dozo-Pak Bydgoszcz Type: MP-450 Power: 4 kW Weight: 260 kg Voltage: 400 V The listed price is for one mixer unit; four identical units are available Option to purchase a piston pump, Type PT-1, manufactured by Dozo-Pak in 2014 Price: 1,500 EUR per piston pump Please check out my other listings Chedpfx Ajy R Ecfod Isc

Condition: like new (used), Year of construction: 2021, Inotec I175-IT5-110D Emulsfier Inotec emulsifiers used for the production of fine minces in the meat industry and for the production of fine emulsions of meat, vegetables and fruits. Manufacturer: Inotec Model: I175-iT5-110D-FU-SP Year: 2021 Power: 206A / 128kW Capacity: Up to 7.000 kg/h Hole plate diameter: 175 mm Hopper capacity: 200 liter Csdsy Hqnlopfx Ad Iohc Machine dimensions LxWxH: 1.920x1.150x1.480 mm Machine weight: 900 kg.

Condition: used, This listing is for a 1 of 2 Vickers Instruments Vickers Instruments Binocular Microscope. Cedpfxoxxzmyj Ad Ishc The unit is in full working condition and is ready for immediate release.

Condition: used, functionality: fully functional, machine/vehicle number: AC77021003044, total length: 615 mm, space requirement length: 688 mm, space requirement height: 779 mm, input voltage: 230 V, Equipment: auto duplex, The machine has been professionally serviced by Konica Minolta and is in fully functional working condition. All main functions have been checked, and the machine is ready for immediate use. The printer is in good technical condition and can be inspected and tested before purchase. Service information: Serviced by Konica Minolta Fully operational Ready for immediate use All main functions checked Inspection and test possible before purchase Cjdpfxjz Dpflo Ad Iohc You can also add the following sentence to the main description: The machine has recently been serviced by Konica Minolta and is fully operational and ready for immediate use.

Condition: excellent (used), The device is in good working order and ready for use. Chodpfozhfuasx Ad Iec It comes with a set of sieves with the following sizes: 6 mm, 9 mm, 15 mm, 25 mm, 35 mm. Year of manufacture: 2015. Working width: 140 mm. Electrical power: 5.5 kW. The device has three sorting levels; the fruits that were sorted include: strawberries, cherries, and currants. Please check out my other listings.

Condition: used, Tape dimensions: Length: 1600 mm Width: 1200 mm Drum diameter: 115 mm External dimensions: Width: 1900 mm Chsdpfezdrbxex Ad Iec Length: 2750 mm Height: 580 mm Feeder displacement using a pneumatic actuator over a distance of approximately 1000 mm. The stated price applies to one unit. Please see my other listings.

Condition: used, Make : Inoxpa Chedpfx Aoxnx Dzed Isc Usage : Powder Blending - Homogeniser Capacity : 5000 L/h Y.o.m 2016 Powder Inlet Funnel Product Inlet Pump Product Outlet pump for circulation Sample Valve Stainless steel skid mounted Condition : Excellent

Condition: used, Year of construction: 2017, Overview  This brew house was built in 2017 by Spanish manufacturer INOX DUBRA and has a wort volume of 25 hectoliters. Various equipment is included in the offer, from the brewhouse to bottling. All the equipment is still installed and be viewed and inspected in person at any time.   Chodpfety Ddrjx Ad Iec Scope of delivery  - Brewhouse | INOX DUBRA | 25 HL | Two-Vessel Brewhouse   - Plate Heat Exchanger | CESPEDES | UFT34/1OO- UFT32/12 | 2015  - Cold Water Tank | 2.500L   - 3x Isobaric Fermentation tanks | INOX | 2.500L | 2020  - 3x Atmospheric Fermentation tanks | INDUSTRIAS CESPEDES | 1.000l | 2014  - Brite tank | INDUSTRIAS CESPEDES | 2017   - Grinding mill  - Water tank | 1.000L   - Compressor   - Helicoidal pump   - Volumetric pump - Manual atmospheric filler - Steam generator

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, spindle speed (max.): 15,000 rpm, number of axes: 3, This 3-axis Makino V55-A15 was manufactured in 1998. It features a spindle speed of 15,000 rpm and offers a generous X-axis travel of 900 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. The table dimensions are 1000 x 500 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the Makino V55-A15 vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 1000 x 500 mm Codpfx Adsz Eango Iohc • CE marked: Yes Additional equipment • Chip conveyor

Condition: used, Year of construction: 2015, Overview  This compact brewing, fermentation and packaging setup was manufactured between 2015 and 2022 by various European manufacturers The installation is designed for beer production in bottles and cans and consists of an isobaric filler, can seamer, small brewhouse, fermentation tanks, refrigeration unit, labeller and steel kegs. The equipment is already dismantled and stored und immediiately available. Technical data - Application: Beer (bottles & cans) - Filling type: Isobaric Filling & Seaming - Bottle formats: 33 cl, 50 cl, 75 cl - Bottle output: 350–400 bph (at −1°C to +1°C, 33 cl) - Can formats: 33 cl, 44 cl, 50 cl - Can output: 350–400 cph (at −1°C to +1°C, 33 cl) Brewhouse Chjdpfx Adey Sccxe Ioc - Capacity: 650 L - Heating: Propane gas - Electrical: Single-phase Fermentation & Cooling - Total fermentation capacity: 9,800 L - Stabilization capacity: 2,940 L - Dimensions (refrigeration unit): approx. 1,100 × 930 × 840 mm Scope of Delivery  - Isobaric Bottle & Can Filler | Inox CG | — | — | 350–400 bph/cph - Can Seamer | — | — | 2022 | Brand new, never used - Brewhouse | — | — | 2015 | 650 L, propane gas, agitator - Refrigeration Unit | W3/4 | — | 2020 | Multi-unit control, 4 zones - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, cooling jacket (Unit 1) - Isobaric Fermenter | CEAO Inox | — | 2018 | 650 L, airlock (Unit 2) - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 650 L, dry-hopping port - Isobaric Fermenter | Construções em Aço Inox | — | 2022 | 320 L, dry-hopping port - Atmospheric Fermenter | — | — | 2015 | 650 L, non-insulated - Semi-Automatic Labeller | — | — | 2015 | Circular reel labels - Stainless Steel Kegs | — | — | — | 50 pcs, 30–50 L