Used Corrugated cardboard manufacturing & processing for sale (27)

Condition: used, Technical data Pulper for vacuum batch operation: Year of construction 2016 Operating hours approx. 3,500 hours Total volume pulper 40 m³ Working volume pulper approx. 28 m³ Stock consistency < 15 Material conveying speed from TKF 0.4 m/second Throughput rate up to 3.5 pulper batches per hour Drive power Pulper Hi-Torc drive 440 kW Max. Rotor speed 3,000rpm. Material types: Leached labels from breweries and mineral water bottling plants, wet-strength papers such as tissue production waste, security papers, etc., moisture content approx. 35 - 50%. Beverage carton and other film-coated papers, moisture content approx. 22% on average Kraft papers such as carrier bags, six-pack, sack papers without foil liner, ambient moisture content average 7% Corrugated cardboard waste and clean paper waste, ambient moisture average 7% Throughput calculation example in batch operation with leached labels, with 35% moisture content: Target paper input 4,200 kg x 100% + 35% residual moisture : 100% = 5,670 kg quantity of paper to be conveyed with 35% moisture content for one batch Calculation example for the required amount of filling water: Working quantity 28,000 kg - 5,670 kg material input = 22,330 kg pulper filling water Trough chain conveyor after dosing drum (material input): Kelhsu Tg R Ssccqmeww Type TKF2 2200 - 23150, pos. 100 Centre distance 23,150 mm 1st horizontal section 4,000 mm 2nd horizontal section 3,350 mm Elevating section 15,800 mm Useful width 2,200 mm Sidewall 800 mm Incline 60° Sheet thickness frame 4 mm Belt speed 0.4 m/second Drive motors 2 x 15 kW Chain type FV 140 Pusher height 250 mm Moving end pitch 250 mm Condition of the plant: The pulper was used exclusively in test operation with pre-shredded paper fractions for approx. 3,500 hours. After that, the project was discontinued and the pulper was no longer needed. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 1987, Condition: good (used), Functionality: fully functional, Asitrade Singlefacer E-Flute and B-Flute Year: 1987 - completely overhauled in 2019 Unwinder: 6-stations Max. working width: 1410 mm Kwelotxlv Hehccqmew Max. speed: 150 m/min Sleeve: 100-140 mm Diameter: max. 1300 mm Water spray

Condition: excellent (used), Year of construction: 2002, 1) Bobst Dynaload prefeeder year 1998 2) Bobst Flexo 160 year 2002 n. 5 colors, Vacuum transport, rubber roller Bobst CUBE 3) Bobst SPO 160 A Matic year 2002 Introduction of suction cup Center Line II Kjlhccqov Nywvemsww Stripping station with motorized Quick Lock tool clamping Batch delivery with gripper trim extraction Bobst CUBE 4) Castaldini Breaker year 2007

Condition: used, Year of construction: 2025, The KMK ZLFM-800SC Automatic Film Laminating Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 260 x 250 mm to a maximum of 780 x 1040 mm. It features a pre-stacked paper mechanism with non-stop paper feeding, a feeding head suction nozzle positioned 1150 mm above the ground, and a laminating unit. The machine comes with a 2-year warranty and includes installation. Additional features include an electrically heated powder removal mechanism, an automatic feeder, and a stacker with the paper output roll positioned 890 mm above the ground. It also includes a cutting unit. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: min. 260 x 250 mm max 780 x 1040 mm Equipment: 6-8 weeks after ordering 2 year guarantee + installation Condition New machine Automatic Feeder Pre-piled paper mechanism, non - stop paper feeding device (cycle paper feeding) Feeder: Suction nozzle of feeder head is 1150 mm from the ground Stacker: Paper out roll of the stacker is 890 mm from the ground height Powder removal mechanism electric heating powder removal mechanism Laminating Unit Kwelsvfx Hhjhccqmsw Cutting unit

Year of construction: 2016, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 149/16, Cardboard semi-auto slotter machine up to 2000pcs/hr Kwjlhccqjv Sakzjmjw

Year of construction: 2009, Condition: ready for operation (used), A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025. Kwolhsu S I D Rsccqmjw

Condition: ready for operation (used), Year of construction: 2015, Functionality: fully functional, working width: 1,400 mm, type of input current: three-phase, total width: 2,300 mm, total length: 2,500 mm, total height: 1,200 mm, power of the servo motor: 4,000 W, overall weight: 500 kg, input voltage: 380 V, Machine for corrugated box making. For Fefco 0200,0201,0203,0409,0410 code boxes or sheet cutting. Kwelovuy Daohccqmjw

Condition: good (used), Year of construction: 2004, Fasson gluing machine - infeed width 2100mm - with press belt Kwolhorwi N Hoccqmjw - Meler hot melt gluing machine with 4 heads year 2021

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, working width: 2,700 mm, Kryma SK2800 automatic slotter with vacuum autofeeder, machine have been used very little and is in perfect condition and available anytime. Speed is approx. 2000pcs per hour. Machine can do up to 10m long sheets. Video can be sent upon request. Also available Kryma flat bed roller die cut like new, and Sunthinks SC860 single pass printer with auto feeder. * We can arrange transport within Europe, and give offer with transport included if of an interest. Kwolstth Iashccqmow

Condition: used, Year of construction: 2025, The KMK WJ-1800 Corrugated Cardboard Making Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles a format of 1800 mm and is part of the high-speed KMK WJ series, capable of producing 2, 3, 5, or 7 layers of corrugated cardboard. Key features include a double-layer NC separating machine, a full-servo cutting and creasing machine, and a hydraulic roll stand. The machine comes with a 2-year warranty and includes installation. It also supports 280/320 single-sided configurations. The delivery terms are FCA, with an estimated delivery time of 8-12 weeks after ordering. Format: 1800 mm Equipment: 8-12 weeks after ordering 2 year guarantee + installation Condition New machine KMK WJ Series High Speed 2/3/5/7 Layer Corrugation Line Full servo slitter scorer machine Double layer NC cut off machine Hydraulic mill roll stand 280/320 Single facer Kslhcevfxy Iscqmeww

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, Offer for the Sale of a Used Technological Line for the Production of Corrugated Cardboard 1. Subject of the Offer A technological line for the production of corrugated cardboard, model WJ150-1600-3, and a cardboard drying line, model WJ150-1600/250m/min, manufactured by Techcut e.K. The machines are located in Poland and are currently in continuous operation. 2.Key Technical Data Model: WJ150-1600-3 Working width: 1600 mm Maximum speed: 250 m/min Flute types: B, C, E Optimal speed: 180-200 m/min (single wall) 100-140 m/min (double wall) The technological line includes the following components: Automatic Dry-End System Double-sided heating section: 15 heating plates x 600 mm Tension system: two sets of cotton belts Power: 31 kW Condition: very good Rotary Guillotine for Waste Rotational knives Power: 21 kW Condition: very good Cutting Knives (Single Spiral Knife) Power: 23 kW Weight: 11.2 tons Computer-controlled for precise cutting Bottom Layer Stacker Double stacker and output conveyor Power: 17 kW Steam System (Preheater) Moisture control for cardboard Power: 32 kW Waste Removal System Pressurized pipes to the shredder Waste Shredder Power: 15 kW Capacity: 1500 kg/h Kwsljvntdaohccqmew Knife System (Baler) Maximum pressure: 40 kN Power: 12 kW Cardboard Drying Line Includes: Single Facer (Flute B/C) Roller diameter: Ø360 mm Power: 19 kW Double Facer (Flute B/C) Roller diameter: Ø360 mm Power: 19 kW Slitter-Scorer (Longitudinal Cutter) Knives: 4, Scorers: 6 Minimum cutting width: 100 mm 3. Technical Condition The machines have been regularly serviced, are fully operational, and ready for immediate production. The technical condition is rated as "very good" under a restoration-based approach. Technical documentation and photos are available upon request. 4. Price New line price: Over €2,000,000 Used line price: €620,000 EXW, Poland 5. Benefits of the Purchase Attractive price compared to a new set. High-quality construction and reliable performance. Immediate production readiness. If interested, please contact us. Technical documentation and details regarding transport and assembly are available upon request.

Year of construction: 1994, Condition: ready for operation (used), A Bobst die-cutting machine for the corrugated board industry is available. Format dimensions X/Y: 1600mm/1100mm, min. sheet dimensions X/Y: 400mm/5200mm, die-cutting force: 400t, die-cutting speed: 6500/h, number of colors: 3, flute type: single/double. Including pressure unit Bobst Flexo 160, feeder Roda and crusher Pallmac. Documentation available. On-site inspection is possible. Kelhccsvw U Ekeqmjww

Condition: good (used), Year of construction: 2003, working width: 3,600 mm, Slot punching machine for flap cartons, working width max 360cm, max length of cut slot 80cm Kwelsq S Rxvohccqmew

Year of construction: 2022, Condition: excellent (used), Functionality: fully functional, Kryma MWP-1500 roller die cut machine, max sheet size 1500x1300mm, machine is almost like new, very little usage. Available anytime. Floor size is 340x190cm. Also available Kryma SK2800 automatic slotter with auto feeder in great condition + Sunthinks SC860 single pass printer with autofeeder. * We can arrange transport within Europe, and give offer with transport included if of an interest. Kslhccotth R Doqmjww

Condition: used, Year of construction: 2025, The KMK HBJ-D1200 Paper Board Erecting Forming Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine is designed to handle a variety of materials including 200-600 g/m???? cardboard, PE-coated paper, kraft paper, and corrugated board. It can produce lengths ranging from 100 to 450 mm with angles between 5???? and 40????, and widths from 100 to 400 mm. The machine has a production capacity of 80 to 320 pieces per minute and a total power of 6.5 kW. Its overall dimensions are 3600 x 1800 x 1700 mm, with a total weight of 2.4 tons. The machine can handle heights ranging from 15 to 200 mm. It comes with a 2-year warranty and includes installation. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Equipment: Delivery 6-8 weeks after ordering Condition New machine 2 year guarantee + installation Production capacity: 80-320 pcs/min Suitable Material: 200-600g/m2 card paper, PE coated paper, kraft paper, corrugated paper Length: 100-450 mm, degree: 5??- 40?? Width: 100-400 mm Kelovfxyhshccqmjww Height: 15-200 mm Total Power: 6.5 kW Total Weight: 2.4T Overall Dimension: 3600 x 1800 x 1700 mm

Condition: excellent (used), Year of construction: 2014, HMB rotary punching machine working width 125cm, 400v power supply Kwelhccovdyinjqmjw

Condition: used, Year of construction: 2025, The KMK BY-800F Automatic Foil Stamping & Creasing Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 250 x 340 mm to a maximum of 620 x 800 mm. Key features include an electric control unit, a conveying unit, touch control, a stamping and embossing unit, and a feeding unit. The machine comes with a 1-year warranty and includes installation. Additional components include a delivery unit and a drive and transmission unit. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: min. 250 x 340 mm - max. 620 x 800 mm Equipment: Condition New machine 6-8 weeks after ordering Feeding Unit 1 year guarantee + installation Conveying Unit Die-cutting and Stamping Unit Kwolhcevfxwmscqmow Driving and Transmission Unit touch-control Delivery unit Electric control unit

Condition: good (used), overall weight: 1,500 kg, type of input current: three-phase, input voltage: 380 V, Big machine of Polish production Roller 8 roller, working width 350cm. Kelhccevbwk Djqmsww

Condition: used, Year of construction: 1996, The Bobst Flexo 1600, manufactured in 1996, is currently in production and located in Germany. This machine handles formats ranging from a minimum of 600 x 520 mm to a maximum of 1600 x 1100 mm. It is equipped with five color stations featuring vacuum sections, a UV dryer, an automatic vacuum conveyor, and a Serco-Feeder MKBF 50x65 C1600C. Additionally, it includes four lower printing units with chambered doctor blades, a vacuum transport unit at the delivery after the five colors, an automatic washing system, and a maximum speed of up to 6,750 sheets per hour. The machine features automatic adjustments with memory and job retrieval, and it meets EC-certified electrical standards. It also includes an IR dryer. The delivery terms are FCA. Format: max 1600 x 1100 mm. min. 600 x 520 mm Kelhccqsvfxvvemsww Equipment: maximum speed up to 6750 sheets per hour Serco feeder MKBF 50x65 C1600C automatic vacuum feeder Bobst Flexo 160 with 5 printing units with vacuum transports sections 5 colors with vacuum sections new electrical part compliant with EC certified EC standards automatic adjustments with memories and job recall 4 bottom printing units with chamber doctor blades automatic washing system UV dryer IR dryer 5 Colors vacuum transport unit at the delivery after the 5-colors

Condition: good (used), working width: 2,500 mm, type of input current: three-phase, input voltage: 380 V, Bending machine for the production of corrugated cardboard packaging. 4 creases 3pkt ( regulation of height of each crease separately), 1 pair of knives for cutting.The machine has 5 shafts Kwslhccqet Syrbsmew

Condition: used, Year of construction: 2025, The KMK 106-MTF Automatic Foil Stamping and Die Cutting Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 450 x 370 mm to a maximum of 1060 x 770 mm. Weighing 17,000 kg, the machine features three longitudinal and two transverse foil pull shafts, with a maximum sheet size of 1060 x 770 mm and a minimum sheet size of 450 x 370 mm. The overall dimensions of the machine are 6050 x 4200 x 2260 mm, and it supports a maximum die-cutting size of 1050 x 750 mm. The machine has a gripper margin of 8-17 mm and a maximum stack height of 1350 mm. It includes 12 individually heatable zones, each adjustable up to 200????C, and a main motor power of 11 kW. The maximum embossing size is 1050 x 750 mm, with a maximum stack height of 1200 mm and a maximum longitudinal foil diameter of 250 mm. The machine comes with a 2-year warranty and includes installation. Additional features include an air requirement of 0.6 MPa and a flow rate of over 0.37 m????/min, a maximum mechanical speed of 7500 sheets per hour, and a maximum cutting force of 300 tons. It can handle paper weights ranging from 90 to 2000 g/m???? for cardboard, 0.1 to 2 mm for cardboard, and up to 4 mm for corrugated board. The delivery terms are FCA, with an estimated delivery time of 8-12 weeks after ordering. The maximum embossing speed is 6500 sheets per hour. Format: 1060 x 770 mm 450 x 370 mm Equipment: Kwjlhccovfxvpeqmew 8-12 weeks after ordering 2 year guarantee + installation Condition New machine Max. sheet size: 1060x770mm Min. sheet size: 450x370mm cutting size: 1050x750mm mping size : 1050x750mm Gripper margin: 8-17mm Paper range: 90-2000g/m2(cardboard) 0.1-2mm(cardboard) =4mm(corrugated) Maximum cutting force: 300 T Max. mechanical speed: 7500 s/h mping speed: 6500 s/h Foil pulling shafts,longitudinal 3,transversal 2 Zones individually heated: 12 heating zones ( each zone can be adjusted independently, max 200 Max. foil longitudinal diameter: 250mm ivery pile height: 1200mm ding pile height : 1350mm Main motor power: 11 kW Machine power: 46kw Machine weight: 17000kg Air requirements: 0.6Mpa, >0.37m3/min Overall machine dimensions: 6050x4200x2260mm

Year of construction: 2003, Condition: not inspected (used), Hello, I sell a rotary die-cutting machine for the production of corrugated cardboard packaging with sloter function of Polish production PRYMAT. The machine has 2 sections flexographic printer, creasing and punching sections and vacuum feeder. Max format 2400/1400, printing area 2200/1360. It makes cardboard boxes from 3 and 5 layer cardboards. Kwjlhju A I Tvjccqmsw

Condition: used, Year of construction: 2025, The KMK CM-1500A (2R) Roll to Sheet machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles a format of 450 x 1650 mm. It comes with a 2-year warranty and includes installation. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: 450 x 1650 mm Kwslevfxt Ijhccqmew Equipment: 2 year guarantee + installation Condition New machine 6-8 weeks after ordering

Condition: used, Year of construction: 2025, The KMK 1500-BMY Semi-Automatic Die Cutting & Creasing Machine, manufactured in 2024, is currently in a print shop and located in Germany. This new machine handles formats ranging from a minimum of 550 x 550 mm to a maximum of 1510 x 1100 mm. With a maximum die-cutting speed of 4500 sheets per hour, it operates in a flat-to-flat die-cutting style. The machine has a main motor power of 11 kW and a total power of 17 kW, with a maximum die-cutting pressure of 350 tons. It can handle paper and board thicknesses ranging from 1 to 9 mm. The machine's dimensions are 6300 x 4500 x 2500 mm, and it has a maximum stack height of 1400 mm and a maximum delivery stack height of 1200 mm. Weighing 17.8 tons, this machine comes with a 2-year warranty and includes installation. The delivery terms are FCA, with an estimated delivery time of 6-8 weeks after ordering. Format: 550 x 550 mm 1510 x 1100 mm Equipment: 6-8 weeks after ordering Kwelhcjvfxrwecqmsw 2 year guarantee + installation Condition New machine Die cutting style: Flat to flat Max. paper size: 1510 x 1100 mm Min. paper size: 550 x 550 mm Max. Die-cutting size: 1500 x 1100 mm Max. Die-cutting pressure: 350 T Paper processed cardboard: 1-9 mm Max. Die-cutting speed: 4500 sheets/h Max. feeding pile height: 1400 mm Max. delivery pile height: 1200 mm Main motor power: 11 kW Total power: 17 kW Weight: 17.8 T Dimensions: 6300 x 4500 x 2500 mm

Condition: used, Year of construction: 1973, The Bobst SP 1120-E is a punching machine equipped with a stripping unit, designed for efficient and precise punching operations. Manufactured by Bobst in 1973, this model is located in Germany, with pricing available upon request. It features a format of 780 x 1120 mm and can handle sheet sizes ranging from a maximum of 800 x 1120 mm to a minimum of 380 x 450 cm. The machine boasts a running speed of up to 6,000 sheets per hour and a cutting force of up to 300 tons. Additional features include a platform, pallet feeding with a non-stop device, sheet feeding (OS) with double sheet detection, and a centerline. Format: 780x1120 mm Kwolhccev A R I Seqmew Equipment: Die Cutting Machine with Stripping Unit Sheet size: maxi 800x1120 mm - mini 380x450 cm Running speed: Max. 6000 Sheets/Hour Cutting force up to: 300 Tons Platform Pallet Feeder with Non-Stop device Pull guide (OS) with Double Sheet Detector Centerline