Used Paper Bag Machinery for sale (77,736)

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Used high-performance roll garbage bag production machine for sale. Equipment: Roll lifter, longitudinal welder, folder, bottom welder, labeller. The machine is in excellent condition and can be inspected during operation. Support and spare parts are available from the manufacturer. Iedpsx Ry Enjfx Ag Usht Technical data: - Welding width: 700 mm - Maximum bag length: 2000 mm - Minimum bag length: 380 mm - Film speed: 120 m/min - Drive type: Servo - Number of tracks: 2 Additional specifications: - Heavy-duty, automatic 2-lane roll garbage bag production machine - Film thickness: LD/LLDPE: 0.012–0.060 mm (single layer) HDPE: 0.008–0.015 mm (single layer) - Bag width: 300–700 mm - Line speed: 100–165 m/min (speed depends on material, thickness, and film quality) - Finished roll size: roll width 200–300 mm; roll diameter up to 130 mm - Power demand: 20 kW Single-line labelling machine: - Label width: 70–200 mm (1 lane) - Label length: 180–350 mm - Maximum label roll diameter: 250 mm Year of manufacture: April 2006 Components: 1. TAI-1300C Lifting unwinder 2. SSB-1300A Slitting knife, longitudinal welder 3. TA-800C1 Bag making and welding unit 4. TAF-400-2N-M 2-lane folding machine 5. TAD-700 Four-axis spindle winder Additional details: - Warranty: None - Current status: In production - Availability: Immediate

Condition: excellent (used), Year of construction: 2016, Complete line for packing products like flour, semolina etc into small, fold top paper bags. Was installed new in 2017. Photos show the machine set-up for potatoes. Price of machine without potato weigher is EUR 25,000 Iodpfx Agsttwt Ae Usht

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Paper bag making machine PAK PROJEKT. Very good condition. Trial runs possible. Ijdpfex H N D Ssx Ag Usht

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Raw material - One-side or two side (polyethylene)film coated/laminated paper (Like the PE coated paper; PLA paper; card boad paper with film) Paper Lid Size - for 8oz and 12oz Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, Ihedpfx Agsxur Hij Ust User Need To Buy Air Compressor

Condition: good (used), functionality: fully functional, Holweg RS2 flat & satchel paper bag machine with 2 colour in line flexo print Iodpfx Asru Hftog Ueht Bag width: 70-380mm Bag lenght: 160-680mm Machine can make paper bags with window. Video of machine in operation available if required. Also available: - Holweg RS2 with 3 colours, - Windmöller & Hölscher Matador 50, - Fischer & Krecke Maxima 26.

Condition: excellent (used), Year of construction: 2021, Haining Chengda Machinery Co Ltd Shunda SMD-90 12 OZ Paper Cups The machine has inpection unit to detect if the cups are sealed correctly and if they are clean. If it detects any problem, it removes the cup. The table which collects the cups is included. Real working speed of the machine is 90 - 100 cups/minute. SMD-90 is designed to make single coated paper cups for cold and hot drinking cups. The machine is in perfect working condition and can be seen in production anytime. Ihjdpeignz Hsfx Ag Ust

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: E737, total width: 2,650 mm, total length: 3,900 mm, total height: 3,400 mm, space requirement width: 3,150 mm, space requirement length: 4,400 mm, space requirement height: 4,000 mm, overall weight: 3,400 kg, The machine is ready to be used. the machine is making rigid boxes without tape and max height of the box is 100 mm (OD). Number of boxes produced 2.101.468 pcs Iodpswub Nisfx Ag Ujht

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, Machine for making paper bags with square bottom Isdpfx Agsw Nvi Sj Ujht Bag width: 45 mm - 125 mm Tube length: 150 mm - 340 mm Gusset: 30 mm - 75 mm Photocell Max reel width: 400 mm In-line 4-color flexo printing unit

Condition: ready for operation (used), Year of construction: 1980, Bag width: 80-260 mm. Tube length: 135-370 mm. Productivity: up to 180 pieces/min. Forming material: from 35 to 120 g Max roll width: 650 mm Electrical connection: 380V, 50/60 Hz Ijdpfew Nvhuex Ag Usht Power consumption: 35 kW

Condition: used, Year of construction: 1987, Used Paper Bag Making Machine Manufacturer: Newlong Model: RBF – 35S Serial number: 147 35 87 Year of origin: 1987 Country of origin: Japan Bag width: max 350 mm, min 220 mm Bottom width: max 180 mm, min 60 mm Tube length: max 520 mm, min 250 mm Ijdpfjw Nwwqjx Ag Usht Speed: approx. 100 pcs/min Feeder (roll size) width: approx. 1080 mm

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Model: RS 26 Year: 2003 Width (mm): 900 Materials (Paper): 25 - 100 gsm Bag length (mm): 160 - 760 Bag width (mm): 70 - 380 Gusset depth: 80 mm Flap: 13.3 mm Max speed with 4 clamps: 1000 bags/min Max speed with 2 clamps: 500 bags/min Tube forming: Standard plate forming Ihodpfx Agsw Dn H Tj Ust Longitudinal gluing: Cold by nozzle Bottom gluing: Standard ejection

Condition: new, Year of construction: 2025, Cardboard Core winder maschine for Toilet Tissue paper rolls Specifications • Carton web width 60 - 76 mm • Production speed 35 - 40 m / min • Core i. diameter 40 mm - 80mm • No. of plies 2 , 3, 4 plies. (more optional) • Cut off length 600-2900 mm Features • Operation with either hot or cold glue. Ihjdpoit N Rvjfx Ag Ust • Exchangeable mandrels. (for different core size) • Crush cutting by two or three circular cutters with synchronized movement. • Variable speed – electronic. (three phase)

Condition: used, Year of construction: 2007, Manufacturer: Gökkaya Machinery Model: AKO®WALL EX KDH 10W Year : 2007 Type: Wall-mounted dissolver   ATEX classification: Ex 1/2GD cEx dem IIAT3 Weight: 500 Kg Diameter of mixing rotor: Ø 200 mm Shaft length : 985 mm Ihjdpfjx R Ayzox Ag Uet Up/down stroke: 1150 mm Raise/lower: hydraulic Sew Eurodrive unit: 1.5 Kw Loher motor: 7.5 KW  

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, The Master Bag 300X is a high-speed, roll-fed square bottom paper bag machine, built for industrial-scale production of paper bags without handles. Ideal for packaging flour, grains, sugar, bakery products, and dry foods, it supports bag widths from 150–330 mm and lengths up to 530 mm, offering outstanding flexibility for manufacturers focused on efficiency and sustainability. Equipped with YASKAWA servo motors and managed via a user-friendly HMI touchscreen, this machine automates the entire process—paper feeding, tube forming, cutting, and bottom forming—ensuring smooth operation and consistent production speeds of up to 220 bags per minute. Technical Specifications: Bag Length: 280–530 mm Bag Width: 150–330 mm Ijdpfx Aowzm I Reg Ueht Bottom Width (Gusset): 70–180 mm Paper Thickness: 60–150 gsm Max Speed: Up to 220 bags/min Paper Roll Width: 470–1050 mm Max Roll Diameter: 1500 mm Core Diameter: 76 mm Power Supply: 380V / 3-phase / 50Hz Installed Power: 8 kW Compressed Air: 6–8 bar Machine Weight: 8,000 kg Dimensions (L×W×H): 9500 × 2600 × 1900 mm Features: Fully servo-driven system (YASKAWA) Roll-fed operation with automatic tension control Photoelectric cutting length control for precision Multilingual HMI touchscreen interface Inline gluing, folding, bottom forming, and stacking Supports unprinted, printed, and PE-coated papers Optional inline printer available CE-certified for European and global compliance Application Sectors: The Master Bag 300X is engineered for a wide range of industries: Flour & Grain Packaging: 2- 5 kg kraft bags Dry Food & Sugar: Pasta, lentils, rice, baking mixes Bakery & Confectionery: Bread bags, pastries, cookies Retail & Grocery: Boutique, organic store, takeaway Pharma & Herbal: Powders, teas, supplements Pet Food: Eco-friendly packaging for dry goods Agricultural: Seeds, fertilizer, animal feed Fast Food & Deli: Leak-proof kraft bags DIY & Hardware: Screws, parts, and tools Eco Brands: Sustainable retail and e-commerce packaging The Master Bag 300X is a next-generation Square Bottom Paper Bag Machine, combining speed, precision, and eco-conscious technology. As a fully automatic Kraft Paper Bag Machine, it’s ideal for modern manufacturers looking to reduce plastic use while scaling up production. This 2025 Model is CE certified and built to meet strict international standards, making it a top choice in paper packaging machinery.

Condition: like new (used), Year of construction: 2020, operating hours: 100 h, functionality: fully functional, For Sale; 2 Martini Quad Seal Bag Formers, little used, as new. Smaller; makes bag 60mmx45mm Larger; makes bag 90mmx60mm Isdpsxzdhxsfx Ag Ujht Sale Price is less than 50% of actual cost

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW Ihodpfeprfbuox Ag Ust dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system Ihsdskahu Repfx Ag Uot - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table Iedpfskahu Uox Ag Ueht - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, Year of construction: 2026, pressing force: 25 t, Equipment: double-sided, The Marinus Powermax Finger Jointer Line profiles horizontally, applies adhesive, cuts out defects, presses and cuts to length. The unique process creates a clean joint that does not require post-processing. About the Finger Jointer When feeding wood into the machine, it is possible to mark defects, such as knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. For instance, to get cladding or paneling without knots or holes. Before the profiling and also before the pressing, the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. This results in a highly accurate connection of the finger joint, with a flat surface at the joint and a straight end-product. Because of this precision (for most purposes) the wood does not need to be planed or sanded afterwards. The adhesive applicator is mounted to the carriage with the profile cutters. In the returning stroke of the profiling carriage the adhesive is applied. The use of PU adhesive ensures a very strong bond, suitable for outdoor use and in wet environments. While most other finger jointers move the wood transversely (right-angled) past the profiling heads, the Marinus Finger Jointer moves the wood longitudinally (lengthwise) through the machine. This enables feeding in long lengths of 6 meters or even longer. As a result, the machine can process all the wood, including longer lengths, and use it all (except for the defects) for the jointed end-product. This way, there is no good wood turned into short pieces of scrap. Where other finger jointers focus on re-using short pieces of scrap wood, the Marinus eliminates the production of scrap wood. The Marinus Finger Jointer contributes to an efficient and sustainable production process. Specifications: Infeed Lenghts: 450 - 6000+ mm Infeed Widths: 50 - 300 mm Infeed Thicknesses: 8 - 50 mm Length modes: Variable / Fixed Capacity: Up to 8 joints/min This machinery is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machinery is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery. Iodpjp R Iwhjfx Ag Ujht

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 200 mm, The Marinus Powermax Chevron is an advanced machine line for head-end machining tongue and groove on Hungarian-point (Chevron) and herringbone parquet. Several wooden parquet boards can be loaded into the infeed cassette, after which the process runs automatically. First the boards are pre-cut to the corresponding length and angle in the cross cut saw unit, then they go via conveyor to the Chevron machine. Before the profiling takes place the wood is brought to a stationary position, fixed sideways and clamped to an accurate reference surface above. Resulting in high profile accuracy with no noticeable edge on the top side when the boards are fitted together. The two arms on which the profiling heads slide back and forth are sturdy built and driven by servo motors, which guarantees that all the boards have exactly the same length and angle. The lengths and angles are stepless adjustable via the user friendly touch screen panel. This clamping system combined with two pre-cut aluminium backing blocks effectively prevents blow-outs and splintering. Lengths: 350 - 1200 mm Widths: 50 - 200 mm Thicknesses: 8 - 22 mm Angle: -45° to +45° Capacity: Up to 10 boards per minute Length modes: Fixed lengths This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. Ijdpfxeiv R Hhs Ag Usht This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: new, Year of construction: 2026, The Marinus Powermax Endmatcher is designed for head-end machining tongue and groove on parquet floorboards, decking and cladding, producing fixed and variable lengths. It can be used for any type of wood; hardwood, softwood, or engineered wood. The machine can cut to length, cut out defects, and do head-end profiling, all in a single pass of the wood through the machine. When feeding wood into the machine, it is possible to mark defects, like knots or cracks, with a luminescent crayon. The machine will cut out these defects, including the crayon lines. Ihedsf Hkgpjpfx Ag Ust Lengths: 450 - 6000+ mm Widths: 50 - 300 mm (optional width of 400mm or 500mm) Thicknesses: 8 - 45 mm Capacity: up to 20 pc/min Length modes: Variable / Fixed / Round. This machine is engineered and built in our company in The Netherlands and will be delivered new from our factory. This machine is equipped with an online remote support system. We provide customer support worldwide. This listing on Machineseeker is also made by us: Marinus Machinery.

Condition: as good as new (ex-display), Year of construction: 2023, CNC - turning center YCM NTC2000LSY control : Fanuc TXP100FBTXP100FB+ main spindle : A2-6 / 5.000 rpm, hole through spindle: Ø80mm, hole through draw bar: Ø66mm sub spindle : A2-5 / 6.000 rpm, hole through spindle: Ø55mm, hole through draw bar: Ø45mm Ihjdpfxstt Dhve Ag Uet Turret Capacity: 12 Max. Turning Diameter : Ø310 mm Max. Turning Length : 570 mm X travel: 160mm Z travel: 570mm Y travel: 90mm (-50 / +40mm) LSY (Y axis, BMT55 turret 12T High performance coolant pump 8 bar coolant gun interface for bar feeder automatic Renishaw HPMA tool length measuring system main spindle Parts collection system Counter spindle

Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231432, CNC short turning machine – Citizen Miyano BNE-51MSY Year of manufacture: 2018 Condition: Very good, fully operational Availability: At short notice Brief description For sale is a Citizen Miyano BNE-51MSY CNC short turning lathe in MSY configuration featuring main and counter spindles, as well as a Y-axis. This machine is ideal for precise and cost-effective complete machining of complex turned and milled parts in series production. Equipment / Highlights - Fixed headstock (short turning) - Main spindle + counter spindle - Y-axis - 2 tool turrets, each with 12 stations - Driven tools - Simultaneous machining capability Iedsx Tg Sgjpfx Ag Ujht - High rigidity and process reliability Technical data - Max. bar capacity: Ø 51 mm - Max. turning diameter: approx. 165 mm - Max. turning length: approx. 380 mm - Main spindle speed: up to approx. 5,000 rpm - Counter spindle speed: up to approx. 5,000 rpm - Control: Mitsubishi MELDAS - Machine weight: approx. 8,000 kg The machine is fully functional, both electrically and mechanically. Complete technical documentation available. The machine can be inspected under power by prior appointment. Subject to technical changes, errors, and prior sale!

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Ihjdpfx Agsx Axbco Uet

Year of construction: 2007, operating hours: 2,000 h, condition: used, functionality: fully functional, cylinder diameter: 200 mm, pressure (max.): 6,000 bar, machine/vehicle number: 600/55, High-Pressure Food Processing Machine (HPP System) – Wave 6000/55 This high-pressure food pasteurization system (HPP) is a unit designed for batch processing of packaged food using hydrostatic pressure. The machine is fully operational, well maintained, and suitable for research, product development, and low-to-medium volume industrial production. High-pressure processing (HPP) offers significant advantages for food manufacturers seeking to improve product safety, quality, and shelf life without the use of heat or preservatives. By applying up to 600 MPa of hydrostatic pressure to already packaged products, HPP inactivates harmful pathogens such as Listeria monocytogenes, Salmonella, and E. coli while preserving the natural taste, texture, nutrients, and color of the food. This makes HPP an attractive technology for clean-label formulations. In addition, the process typically doubles or even triples the shelf life of many refrigerated foods, reducing waste and improving distribution flexibility. Because HPP is a post-packaging treatment, recontamination risks are minimized, enabling manufacturers to meet stringent food safety standards in domestic and export markets. The technology is suitable for a wide range of products, including meat, seafood, juices, plant-based foods, ready-to-eat meals, and high-value chilled items. The system offers a treatment chamber volume of 55 L, reaching pressures up to 6,000 bar (600 MPa), with automatic basket loading/unloading and an integrated intensifier. It is ideal for enhancing food safety, extending shelf life, and enabling clean-label product concepts. Technical Details Model: Wave 6000/55 Chamber layout: Horizontal Chamber dimensions: Ø 200 mm × 2,000 mm Chamber volume: 55 L Total equipment length: 8,020 mm Maximum working pressure: 6,000 bar (600 MPa) Pressure medium: Water, free of additives Processing water temperature: +5 °C to +30 °C Pressure-build time (0–6,000 bar): 3.9 min Intensifiers: 1 integrated Electrical power: 47 kW (50 Hz) Loading/unloading system: Automatic Total weight: ~20,000 kg Condition and Use Cases The machine is in very good condition and suitable for: Meat, seafood, ready-to-eat meals Dairy, beverages, plant-based products Shelf-life extension and pathogen reduction R&D, validation trials, pilot production Cycles completed (as of Jan 2025): 20,000 Included with the High Pressure Food Processor WAVE 6000/55: High-pressure vessel made of stainless steel, wire-wound with high-resistance cable; horizontal layout with 55 L useful volume Yoke constructed from high-quality steel layers, double-primed and painted Stainless steel vessel plugs Support beds Hydraulic power unit with vessel opening/closing mechanisms Ihedpox E Utiefx Ag Uet Integrated intensifier (1 unit) High-pressure stainless steel piping for intensifier–vessel connection Water filtration system (5 µm) Temperature probe for monitoring processing water via the client fluid circuit Tactile touch screen for automatic and manual operation (interface in German) Electrical control cabinet SCADA system for control and data recording Internet communication module for remote service Instruction manual The machine has been used for reasearch purposes and has only done ~20.000 cycles. It is assumed the average cycle length is 6minutes = 2,000 hours All technical specifications and details are provided without guarantee. Subject to prior sale and possible errors or omissions.