Year of construction: 1968, operating hours: 35,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 7723238, 72x102cm two revolution die cutter for thin paper and light carton up to 600 grs/m2. excellent stable and very silent fast cylinder press. Locking to the floor is not necessary. Lodpfx Abjtyy Sfjyjru Price is for each machine, NOT for the package. Package is 15% discount. Two identical machines available from the same shop, both with the same specs and the same state of maintenance. As a kind of specialist in these type of machines, I have delivered machines to this company which already had one, so at certain moment they produced with 4 machines and 6 or 7 Heidelberg Cylinder presses at half the size. maintenance always carried out by my company, so both machines have a known history, which is good. As a result of shrinking industry in The Netherlands and different types of shivering/perforating/scoring on offset presses with the cutting plates, the company went to a smaller building and only kept one Condor. In my opinion the best, fastest and strongest letterpress ever, built in this size, for sure! With less parts than a Heidelberg SBD and running much smoother. As a result of my cooperation with the KBA factory and particular Mr. Hans Bernhard Bolza-Schünemann who is the engineer responsible of the several new innovative constructions in the Condor, a small sized Condor (65x95cm) in very good original condition as a complete printing press, with some ""patina"" was donated to the Leipzig -er Museum für Printkunst (June 2002), because of its importance for the development of the printing industry in the 60's.

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Lrjdez St U Ujpfx Abyou Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication - additional safety covers - maintenance tools - hardened pressure sheet

Year of construction: 2013, condition: used, 1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equipped with 15inch touchscreen, USB and Ethernet interface as well as direct processing of prepress data on the machine control without additional hardware, CIP 3 ready, CIP 4 optional. Including spare parts package with wear parts. External compressed air connection with 6bar required. The system is in very good condition. Sale preferably as a complete system. Documentation available. An on-site inspection is possible by appointment. Lrjdjzz Iq Rjpfx Abyeu

Condition: ready for operation (used), Year of construction: 2018, Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible. Lsdpfx Absy Sv Syeysru

Condition: excellent (used), * Massenzana reelstand width 2500mm * Very good condition Lrodez Sni Uepfx Abyeu

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of cooling: water, degree of automation: automatic, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fridge, fume extraction, safety light barrier, We offer this ready for use Highcon BEAM 2 laser cutting machine, year of construction 2020. IN production, can be inspected on site. The price includes the chiller as well. If you have any questions or need more information, feel free to send us a message or give us a call. Lredpfx Ajy Dq E Sjbyou

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 87A, total width: 2,400 mm, total length: 10,500 mm, total height: 2,300 mm, cutting length (max.): 670 mm, type of input current: three-phase, overall weight: 9,000 kg, Holweg RS2 (42GL) Year 1988 Brand: Holweg Model: RS2 (42GL), modified for standard single-channel RS21 operation Year: 1988 For the production of flat-bottom paper bags, with or without gusset. Machine overhauled: new electrical components, new 3-phase main motor with frequency inverter, unwind station with new Renova Italy electronic brake system and dancer roller. Equipped with inline 4-color flexographic printer model IS 80, maximum print width 800 mm. Printing sleeves included: 4 x 220 mm, 3 x 320 mm, 1 x 370 mm, 1 x 380 mm, 4 x 400 mm, 4 x 430 mm, 4 x 440 mm, 1 x 520 mm, 3 x 520 mm, 3 x 580 mm, 6 x 660 mm, 3 x 680 mm. Gears: - 320 mm: 4 printing gears + 2 machine gears - 340 mm: 4 printing gears + 2 machine gears + 1 printer gear - 380 mm: 4 printing gears + 2 machine gears + 1 printer gear - 440 mm: 4 printing gears + 2 machine gears + 1 printer gear - 520 mm: 4 printing gears + 1 machine gear - 580 mm (290): 4 printing gears + 2 machine gears + 1 printer gear - 680 mm: 4 printing gears + 2 machine gears + 1 printer gear Forming plates: 1 x 90 mm, 1 x 120 mm, 1 x 140 mm, 1 x 150 mm, 1 x 170 mm, 1 x 180 mm, 1 x 200 mm, 1 x 240 mm, 1 x 300 mm. Note: Gluing knives for different bag widths are not included. Printer shafts/adapters: 4 printer shafts included, compatible with the printing sleeves listed above. Perforation type. Max unwinder diameter: 1,200 mm Pneumatic shaft: 70 mm Max paper width: 900 mm Min–max bag width: 70–340 mm (current owner produced only one bag size: 140 mm width x 260 mm length) Cut-off length: 190–680 mm Min–max bag length: 180–670 mm Lredpsy Iclxsfx Abyou Working speed: 400–800 bags/min (depending on bag size) Suitable paper: 30–70 g/m² Machine can be inspected in operation. Immediately available.

Condition: used, Year of construction: 2005, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: 12-032-SP, total width: 1,900 mm, total length: 17,370 mm, total height: 850 mm, Linear folding and gluing machine equipped with 4 electronically adjustable glue guns for gluing 4/6-corner boxes (ERO). Lrsdszin Hhopfx Abyju

Year of construction: 2006, condition: excellent (used), The machine was taken out of operation and put into storage. Furthermore, it was driven as a capacity buffer and thus only little. Lrjdpsncbtbjfx Abyju The machine is sold with some spare parts such as engine / gearbox.

Condition: excellent (used), Year of construction: 2004, PERFECTA TRIMM STAR 110; Year of manufacture: 2004; Counter reading: 3 million; Lrsdozzavlopfx Abysu Productivity: 15 – 110 cycles/min, infinitely variable; Maximum format (trimmed): 300 x 440 mm; Minimum format (trimmed): 85 x 115 mm; Maximum format (untrimmed): 320 x 460 mm; Minimum format (untrimmed): 100 x 125 mm; Height of insert/cut stock: 70 mm; Height of single sheet: 6 mm.

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Manufacturer: IBD Wickeltechnik GmbH Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Square journal range: 30–40 mm Lsdpfx Aszw Uilsbyeru Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Minimum braking torque: 6 Nm at 0.2 bar Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Characteristics * Speed 350 m/min * 500 cuts/min * 8 unwinding stations * 10 cutting blades (pair) * 2 sets of cutting blades * Cutting capacity (set) 540 gsm * Cross cutter max.load 805 gsm Sheet output * Paper sheet width min: 350 mm * Paper sheet width max: 2200 mm Lredpovphiyefx Abyeu * Paper sheet length min: 400 mm * Paper sheet length max: 1650 mm * Stack height incl.pallet: 1800 mm * Stack weight incl.pallet: 5000 kg Roles input * Roll diameter min: 500 mm * Roll diameter max: 1500 mm * Roll weight max: 5000 kg * Sleeve diameter min: 76 mm * Sleeve diameter max: 150 mm

Year of construction: 1973, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 658, Available directly from our warehouse in Son; heavy stamping die with electric coupling, electrical system completely renewed around 2019, original build year 1973; mechanically fully overhauled in 2015, moving die resurfaced, die pins and gears replaced with new pins of a much stronger mechanical grade than originally, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this is extremely wear-resistant with the addition of Pb (lead) for better performance and good emergency running characteristics (i.e., no lubrication), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays on each channel, motorized clamping of the stamping die. Maximum stamping die size with automatic clamping 900 x 1300 mm. Safety bars are much more extensive and more robust compared to the original design, 350 tons of stamping force. Lredpfxsxz Niuo Abyeu

Year of construction: 2020, condition: used, functionality: fully functional, Nine locking frames for a Bobst 162 CER, available at a bargain price. Lodpfxey U Itus Abyoru

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Capacity: max ~ 350000 T/pa Ledpfxevptbue Abyjru Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Lead Edge type Sun with alignment table LONG Feeder and OS and OOS squaring joggers Die cutting station with center line II Lsdpfx Abjzmrnwjyeru Stripping station with Quick Lock clamping of male and female tools Removal of grip edge High pile delivery Max speed 5,500 cycles/hour Max size 1,200x1,650 mm

Year of construction: 2010, condition: ready for operation (used), Side table with air Chrome table Lredpoz Aah Rjfx Abyou Data numeric control is installed 2008 from Perfecta and completely overhauled Available immediately 3 knives

Condition: refurbished (used), Compact folding machine for narrow profiles Maximum working width 300 mm Mobile, with adjustable height Self-contained operation Lsdpfoz Snqbsx Abyoru

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Paper cup 7OZ year of production 2022 ed 110 cup/min Auto lubricating Cup colector Lrodpfjyrz Apox Abyou

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, offline coater, calander, reeler, offline calanders and slitter winders. Various updates including headbox, top former, press section, offline coater, Voith speedsizer, Voith jet coaters and steambox & ceramic rolls. Characteristics: Capacity: max ~ 240000 T/pa Width: 4800 mm Grammage: 40 – 170 gr/m2 Speed: max 1165 m/min Ledpfx Aevptqijbyjru

Condition: good (used), Year of construction: 2003, Bahmüller Double Champion 25/36, ref. 3050 Year 2003 Model DLN 25/36 SG Processes two-part or single-part blanks Max. width: 3600 mm Max. height: 2500 mm Stitching speed: 850 staples per minute Suitable for 5 and 7-layer applications Includes gluing unit Stacker currently available Lodoz Iltmepfx Abyoru

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Lrjdpfxeyx Uy Aj Abyeu Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 7555605, Max size: 60 x 41 cm, integrated feeder SE - 18.2, cross-web paper cutter ST - 18.2, die cutting unit D - 18, strapping/banding unit PB - 18.1, horizontal and vertical strapping. Paper width min. 35 x 45 mm, paper width max. 405 x 600 mm. Stacking height min. 30 mm, stacking height max. 100 mm. Machine no.: 7555605 Lredpfx Aexc Uv Ajbysu

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. - Rotary cross section - cutting width max. (mm): 2100 - heating: included Ledpfx Abon Hxiioyoru - cooling: included

Year of construction: 2012, condition: ready for operation (used), A Roll-o-Matic bag production line for bottom-sealed film bags is available. Bag length range: 360mm-1800mm, max. bag width: 860mm, max. production speed: 90m/min, max. cycle rate: 230/min, material: PE LD/PP, max. film thickness: 70µm. Machine dimensions: approx. 4100mm/1600mm/1700mm, weight: approx. 1600kg, control system: Siemens PLC. Documentation available. On-site inspection possible. Lrodpfsxrf I Uex Abyju