Used Peddinghaus 210 13 for sale (126)

Condition: good (used), Peddinghaus Combined Section Steel Shear Type 210/ 13 Nsdev D Nzyspfx Amnect See condition

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm Ncsdpfxsi Duh Is Amnet or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: good (used), Cutting performance: Flat steel shears Blade length: 250 mm Sheets up to: 13 mm Flat steel up to: 150 x 16 / 200 x 13 mm Profile steel shears Angle iron up to: 110 x 10 mm Ncsdpfxeh Uhb So Amnjt Miter: 45° up to 90 x 9 mm T-iron up to: 110 x 10 mm Miter: 45° up to 90 x 9 mm U and I steel up to: NP 18 Stroke rate: approx. 30 1/min. Bar steel shears Round steel up to: 42 mm Square steel up to: 38 mm Notcher Sheets up to: 12 mm Notching width up to: 50 mm Notching depth up to: 85 mm Hole punch Thrust: 370 mm Punching capacity: approx. 50 t = 25 Ø x 16 mm / 20 Ø x 19 mm Drive power: 3.0 kW Weight: approx. 2,200 kg Equipment - Hand and foot release - Support table on the hole punch - Various additional tool holders - Various replacement blades - Extensive accessories

Condition: used, round bar steel 42 mm square edge steel 38 mm L-beam 110 x 10 mm cutting capacity 150 x 16 mm pressure 60 t Ncjdpfxjwth N Hs Amnot hole punching press: throat 370 mm hole punching press: capacity (dia. x thick.) 25 x 16 / 20 x 19 mm 720 x 420 mm weight of the machine ca. 2,1 t dimensions of the machine ca. 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter

Condition: used, machine/vehicle number: 2520, round bar steel:42 mm square edge steel:38 mm L-beam:90° 110x10 mm flat steel:150 x 16 mm Ncsdpfx Amecxxrpsnot blade length:250 mm notching deepth up to:12 mm notching: l + T material:80 x 10 mm hole punhing press: pressure:50 t stroke:27 mm hole punching press: capacity (dia. x thick.):25 x 16 / 20 x 19 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,6 x 0,85 x 1,8 m

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Ncedey Ugzdopfx Amnot Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: used, Year of construction: 1983, round bar steel 50 mm square edge steel 40 x 40 mm L-beam 140 x 13 mm Punch power 900 kN hole punching press: throat 510 mm hole punching press: max. length of stroke 29 mm Ncedsvh I T Nopfx Amnet hole punching press: capacity (dia. x thick.) 31 x 20 mm notching: l + T material 80 x 14 mm no. of strokes 40 / 45 Hub/min total power requirement 4 kW weight of the machine ca. 3,7 t dimensions 2,1 x 0,7 x 2,12 m Accessories: various punches and dies

Condition: used, Year of construction: 1978, serial number 4412956673057 95 to. ca. engine output 7,5 kW Nedpfxoy Hl Rbe Amnsct weight of the machine ca. ca 5 t dimensions of the machine ca. 2,2 × 1,0 × 2,3 m Technical specifications (from the label)Angle steel (L-profile):150 × 15 mm at 90°100 × 14 mm at 45°Flat steel:up to approx. 150 × 16 mmlarger cross-sections up to 340 × 16 mm (depending on function)Beam profiles:U-profiles (UPN): 220I-sections (IPN)

Condition: used, functionality: fully functional, Section steel shear and punch type 210/11, 80x8, beam 10 mm, solid material 30 mm, T-section 80x8 Nedpfx Amey Dh Eiensct

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Nodpfx Amswcqmaonoct Manufacturer: Peddinghaus Model: 210/25s Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: used, round bar steel 34 mm square edge steel 30 x 30 mm L-beam 100 x 10 mm flat steel 100 x 14...160 x 11 mm blade length 175 mm T-beam 100 x 10 mm notching: l + T material 10 mm hole punhing press: pressure 45 t throat 305 mm total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 0,8 x 1,5 m * 5-fold combinated profile steel shear incl. flat steel shear profile steel shear bar steel shear notcher hole punch * 2 foot switches * contact limit stop Nodpfxeyh Rnks Amnjct * various punching saddles

Condition: good (used), Profile steel shear, profile shear, punch, punching machine, hole punch Ncsdpjcc Ubuefx Amnst -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Condition: used, Profile shear for steel with notching unit Ideal for construction sites as it is mobile; of course also suitable for indoor use Peddinghaus 13 RP / 10 Angle profile: 60x7mm T-profile: 60x7mm Solid square: 20x20mm Round: 22mm Flat: 90x14mm Lever shear: Tmax: 10mm Pickup location: 28755 Bremen _____ Our general terms and conditions apply; the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. Technology and wear of the offered items are age-appropriate. Used machines are sold exclusively to tradespeople and without warranty. Nsdpfew Ip D Hox Amnjct

Year of construction: 1970, condition: good (used), machine/vehicle number: FF 16, Offer 22226 Technical data: - Pressure capacity 50 T - throat approx. 360 mm - installation height approx. 240 mm - drive 400 V / 7,5 kW Nsdpfjit T Hyox Amnsct - perforates in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - space requirement approx. W 1000 x H 1900 x D 1000 mm - weight approx. 1800 kg

Condition: good (used), functionality: fully functional, Peddinghaus profile and punching machine with automatic stop Very well maintained Nsdpfoyg D Nnex Amnect Punching force 45 t Incl. various punching dies

Condition: used, PEDDINGAUS Type: 210/20 EXCELLENT CONDITION Ncodps Dv Nnefx Amnjt

Condition: good (used), Hand lever shears, long-blade sheet metal and round steel shears, sheet metal shears -Manufacturer: Peddinghaus sheet metal and round steel shear type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Blade length: 150 mm -Lever arm with: safety spring -Quantity: 1x lever scissors available -Price: per piece -Dimensions: 275/100/H1180 mm -Weight: 11 kg/pc. Njdpfjfgi Nqjx Amnoct

Condition: used, functionality: fully functional, Year of construction: 2016, Flat shear blades, 520 mm long, with four cutting edges, also for shearing angle iron 45° material support table with gauge stops on the flat shear station section shear knife for shearing angle iron 90° as well as rounds and squares quick-change punching attachment up to 39 mm Ø, for punches and dies of the blue series or with universal die block for die no. 3 height-adjustable and swing-away stripper with exchangeable plate square notching attachment Njdpfxey Ndt Hj Amnect material support table on the notcher station two two-stage foot pedals and electric control elements on the punch station and notcher station hydraulic low pressure spotter for foot operation connecting sockets for external engagement, e. g. via electrical length stop integrated hydraulic power-pack

Condition: used, Max. Stanzkraft: 650 kN Hole e.g. a 20 mm hole in 20 mm steel For other performance data see nameplate or on request Includes assortment of punches and dies Njdpfx Amof Nwqlonoct Very good condition

Condition: used, Punching force: 200 kN Thread, for example a 13 mm hole in 12 mm steel Viewfinder via handwheel Assortment of tools is included in the price Ncodpfjrmudgex Amnjt

Condition: used, Year of construction: 1997, Thread(e) e.g. a 40 mm hole in 20 mm steel Stroke triggering via foot switch Ncsdsizuhpopfx Amnot Including finder for pegging and setup Assortment of tools is included in the price Punching force: 1000 kN mass: 2400 kg punching force: 1000 kN

Condition: used, Year of construction: 1992, Max. punching and shearing capacity: 800 kN Ncsdpfx Amowak Hnonot Punches e.g. 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm up to 15 mm steel Further technical data on request With a range of punches and dies as desired

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Nsdpfx Astmyifomnect Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down on plate shears Large support table on die side with stops Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Max. punching force: 600 kN Max. shear force: 1000 kN Nsdpfoq D E Tcjx Amnjct Punches 20 mm holes in 19 mm steel Cuts on the flat bar shear up to 500 mm with material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired Very good condition

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down device for a sheet metal shear Ncjdpom T Amusfx Amnjt Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg Very good condition