Used other horizontal machining centers for sale (38)

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Njdpsziy Idjfx Akijlh Max. milling cutter diameter: 80 mm Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell.

Condition: used, Year of construction: 2017, Working range X-axis: 550 mm Y-axis: 450 mm (tool change position 725 mm) Z-axis: 375 mm Workpiece carrier Double swivel carrier with counterbearing and crown gear, swivel time 0/180°: approx. 3.0 s A- and U-axis for fixture plate: max. ø475 × 830 mm Drive system: torque motor Load capacity: 2 × 360 kg Speed range A- and U-axis: 1–50 rpm C- and W-axis (optional): 2 or 4 satellites Work spindle Tool interface: HSK-A63 Speed range: 1–10,000 rpm (optional 1–17,500 rpm) Run-up time to max. speed: < 0.4 s (< 1.0 s with optional spindle) Spindle bearings: ø80 mm Power: 32 kW (40% duty cycle) Torque: 72 Nm (40% duty cycle) Feed drive Drive system: ball screw Rapid traverse X/Y/Z: 75 m/min Axis acceleration X/Y/Z: 10 / 10 / 15 m/s² Max. feed thrust X/Y/Z: 8,000 N Accuracy Position measuring system: direct, absolute Positioning tolerance X/Y/Z: Tp = 0.008 mm Tool magazine Tool change system: pick-up Capacity: 40 pockets (optional 64 or 80) Max. tool diameter: 70 mm / 160 mm (with free adjacent pockets) Max. tool length: 275 mm Max. tool weight: 7.5 kg Chip-to-chip time: approx. 2.5 s Weight and dimensions Total weight: approx. 9,500 kg Transport dimensions (W × H × L): 2.75 × 2.85 × 3.65 m Machine installed (W × H × L): 3.85 × 3.70 × 6.30 m Connected load Nljdpfjz R Szrox Akieh Operating voltage: 3 × 400 V, 50 Hz, TN-S/TN-C Total connected load: approx. 64 kVA Mean air consumption: 0.5 Nm³/min (6 bar) CNC control Siemens SINUMERIK 840D

Condition: excellent (used), functionality: fully functional, 3-axis machining center Nodpezcpfaefx Akielh Work area: 1350 x 2565 mm. Workpiece clamping via vacuum pump.

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231674, A high-quality, 3-axis precision machining center, the MIKRON MILL P 900 from GF Machining Solutions, built in 2017, is for sale. TECHNICAL DATA General Data Manufacturer: MIKRON / GF Machining Solutions Model: MILL P 900 Nlodpfx Ajz Ipnnekieh Machine type: Vertical 3-axis precision machining center Year of manufacture: 2017 Number of axes: 3 Spindle operating hours: approx. 1,530 hours CNC control: FANUC 31i-B TECHNICAL DATA Travel X: 900 mm Travel Y: 600 mm Travel Z: 450 mm Rapid traverse X/Y/Z: 30 m/min Clamping area: approx. 1,000 × 600 mm Max. table load: 1,000 kg Max. spindle speed: 20,000 rpm Tool holder: HSK-A63 Spindle power: up to approx. 36 kW Torque: up to approx. 120 Nm Tool changer: 30-position Tool holder: HSK-A63 Machine concept: 3-axis gantry machining center The machine can be inspected on site by appointment. Subject to change, errors and prior sale!

Condition: ready for operation (used), Year of construction: 2004, controller manufacturer: OKUMA, controller model: OSP-E100M, spindle speed (max.): 20,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 40, number of axes: 4, This 4-axis Okuma SPACE CENTER MA-500HA was manufactured in 2004. It features a spindle speed of 20,000 rpm and a tool magazine capacity of 40 tools, ensuring efficient machining operations. The machine is equipped with a BLUM laser tool measuring system and includes two-sided fixture blocks for versatility. If you are looking to get high-quality machining capabilities, consider the Okuma SPACE CENTER MA-500HA horizontal machining centre we have for sale. Contact us for further details. Nljdpfx Akjz S Eq Usieh • Spindle: HSK-A63 taper; 30 / 22 kW (10 min / continuous) • Tool measurement: BLUM laser tool measuring system • Coolant system: Coolant gun with additional pump • CNC options: DNC-DT500 (500 MB), Super NURBS Type-A • Electrical supply: 400 V ±10 %, 3-phase, 50 Hz • Rated capacity: 57 kVA • Full load current: 82.3 A • Largest motor rating: 141 / 110 A • Interrupting capacity: 18 kA • Marking: CE; Made in Japan • Documentation: Original sales invoice (2004) available • Working hours: Unknown (machine is no longer connected, dismantled and moved to storage) Additional equipment • Fixtures: Two-sided fixture block (500 x 200 x 850 mm); additional two-sided T-slot block (W615-1307-00)

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Nedpfewhdhzjx Akielh Axes: X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable: Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle: Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system: Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment: Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling: Cooling through the Spindle Center bar: 40 BAR Tank capacity: 980 High-pressure bar: 40 BAR Machine running times: Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight: Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000.

Condition: repair required (used), Year of construction: 2012, functionality: not functional, machine/vehicle number: 2560001, Technical specifications: # Machining workspace: X 600 mm; Y 525(890) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary axis (A, rotary table) and 2 rotary axes (C, indexer head) with direct angular measurement system, 50 rpm, accuracy +/- 5 arcseconds # Maximum clamping/part dimensions: Ø 600 x 1420 mm; max weight 600 kg # Rapid traverse speeds: X/Y/Z 50/60/50 m/min; positioning accuracy Tp: 0.02 mm # Distance between spindles: 600 mm # Spindle speed: 1–6000 rpm # Spindle taper: DIN69893-HSK-A100 (with internal coolant supply) # Automatic tool changer: 2 x 20 tools, average chip-to-chip time 4.25 s # Tool maximum: Ø75 mm / length max. 275 mm / 7.5 kg Electrical specifications: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Installation space (W x H x L): approx. 5.8 x 3.3 x 5.05 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring devices: Heidenhain linear scales # Chip conveyor: Knoll Type 550 K-1 # Oil cooling system # High-pressure oil filtration system, up to 80 bar: Knoll KF200/1200 # Shaft, guideway, and electrical cabinet cooling systems Nledoxxkd Uepfx Akioh # 2 oil lubrication circuits # Oil mist absorption/recovery system # Tool breakage and length measurement: Blum Novotec # Work spindle tool presence detection system Machine condition: NOT OPERATIONAL # Automatic operator doors # Tool magazine # Axis protection covers for work area # Z-axis ballscrew and # Z-axis linear guides # Hydraulic overheating # Hydraulic pump (250 bar)

Condition: used, Year of construction: 2003, functionality: fully functional, HORIZONTAL MACHINING CENTER "FAMUP" MOD. MF 650 CNC FANUC SPINDLE HSK 63 15,000 RPM TRAVELS MM 700X660X550 PALLET MM 500X500 FULL ROTARY TABLE Nlsdexwccmepfx Akieh ATC 50 POSITIONS HIGH-PRESSURE COOLANT CHIP CONVEYOR YEAR 2003

Condition: used, Year of construction: 2009, total height: 4,400 mm, total length: 7,640 mm, total width: 5,630 mm, overall weight: 27,000 kg, EDEL CYPORT CP 3020 – 5-Axis CNC Gantry Machining Center Technical Data: Gantry clearance height: 1,380 mm Table size: 5,000 × 2,300 mm A-axis: ±110° C-axis: ±360° Spindle power: 27 kW Spindle torque S1: 130 Nm Spindle torque S6: 170 Nm IKZ: up to 40 bar Nljdpfx Ajz Dgmyjkish Workpiece measuring system: M&H with wireless probe Coolant system: with band filter Direct measuring systems: in all linear axes Automatic central lubrication Spindle cooling Ethernet interface Safety features: safety bumper, light grid, and lamella curtains Travel Z-axis: 1200 - mm Dimensions (LxWxH) approx.: 7640 x 5630 x 4400 mm Travel X-axis: 3000 - mm Feed speed Y-axis: 30000 - mm/min Spindle speed: 12000 - rpm Weight approx.: 27,000 kg Travel Y-axis: 2000 - mm Feed speed Z-axis: 15000 - mm/min Tool Changer: Yes Feed speed X-axis: 30000 - mm/min Number of tool locations: 48 Control: Heidenhain iTNC 530 Year of construction: 2,009 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 2460061, Technical specifications: # Machining Workspace: X 300 mm; Y 500 (725) mm; Z 375 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis (A) + indexable dividing head with direct angular measurement system, max rotational speed 50 rpm, accuracy +/- 5 arcseconds # Max. clamping dimension/part: Ø 575 x 830 mm; max. weight 360 kg # Rapid traverse (X/Y/Z): 65/75/75 m/min; Positioning accuracy Tp: 0.008 mm # Distance between spindles: 300 mm # Spindle speed range: 1–17,500 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x32 tools / average chip-to-chip time 2.5 s # Max. tool Ø 75 mm / max. length 275 mm / max. weight 7.5 kg Electrical data: # Voltage: 3x400V/50Hz # Installed power: approx. 85 kVA / 125A Dimensions: # Required installation footprint: approx. 3.6 x 6 x 3.7 m # Weight: approx. 10,500 kg Equipment includes: # CNC control: Siemens 840D SL # Linear axis measuring system: Heidenhain linear scales # Chip extractor: Knoll Type 550 K-1 # Oil cooling unit # Spindle, guideways, and switchboard cooling system # 2 oil lubrication units # Oil mist extraction/recovery system: ELBARON Vario E2000 (2,000 m³/h) Nsdpfxsxw R Udo Akijlh # Oil filtration system with paper filter, max. 80 bar: Knoll KF200/1200 # Fire suppression: Kraft & Bauer # Part presence monitoring P/Y: with low pressure air detectors # In-process measurement: Marposs T25 # Tool breakage monitoring & length measurement: inductive sensor # Tool holding confirmation in main spindle Machine status: NOT OPERATIONAL # Motorised loading/unloading door # Table A axis # Tool magazine chain # Euchner safety switch, loading door # 5 hydraulic switches (Parker) # 2 pneumatic pistons for tool magazine access # 2 pneumatic pistons for tool clamping # Complete hydraulic system # Hydraulic motor (motor can also be retrofitted) # Compressed air regulator # Chip conveyor/extractor – needs repair # Z-axis linear scale # X-axis linear scale # Numerical control flash card # 4 communication modules (Murr) # 1 of 2 spindles defective – replacement spindle available in stock

Condition: used, Year of construction: 2017, Operating hours: 51,800 h Program run hours: 15,100 h Technical Data: Travel paths/axes X = 800 mm Y = 850 mm Z = 1,050 mm B = 360°, 0.001° Max. spindle speed: 12,000 rpm Total connected load: 77 kVA Required space, LxWxH: 9,000 x 5,500 x 4,000 mm Weight: 18,100 kg Nedpfxjxqp Ivs Akijlh Equipment: - Siemens 840D - Electronic handwheel - Heavy-duty machining package - Tool changer, rotary magazine with 180 places - Tool holder HSK 100 - Operator control panel - Internal coolant supply - Measurement and monitoring: Renishaw, infrared TDS, MPC

Condition: repair required (used), Year of construction: 2001, functionality: not functional, machine/vehicle number: 1640137, Technical characteristics: # Machining workspace: X 400 mm; Y 450 (700) mm; Z 400 mm # Axis configuration: 3 linear axes (X, Y, Z) + 2 twin horizontal spindles + 2 rotary tables A1/2 NC (33.3 rpm), with hydraulic clamping mounted on indexable rotary table A3 (0 to 180° in approx. 4 sec). # Rapid traverse speed: X, Y, Z 1–40,000 mm/min # Positioning accuracy Tp: 0.01 mm # Distance between spindles: 400 mm # Spindle speed: 50–12,500 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 2x30 tool positions / chip-to-chip time 4.5 sec # Maximum tool diameter 75 mm / Maximum tool length 275 mm / 10 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 68 kVA Dimensions: Nlodpfx Akexvyfvoijh # Installation footprint: approx. 6.35 x 4.5 x 4.2 m # Machine dimensions: approx. 4.6 x 3.0 x 3.0 m # Weight: approx. 13,800 kg Equipment includes: # CNC controller: Siemens 840C # Linear axis measuring system: Heidenhain linear scales # Chip conveyor: Knoll 400K-1/950 RSF100 # Oil cooling unit # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil vapor extraction/recovery system # Tool presence detection system in spindle

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: B-7969, Technical characteristics: # Machining Workspace: X 800 mm; Y 400 mm; Height from table surface to floor: 850 mm (max load 450 kg) # Number of T-slots: 3 / Distance between T-slots: 125 mm / T-slot width: 18 mm # Axis description: 3 LINEAR AXES (X, Y, Z) / 4th Axis # Rapid traverse: X, Y, Z - 30 m/min # Travels: Longitudinal (X-axis) 600 mm, Cross (Y-axis) 400 mm, Vertical (Z-axis) 510 mm Nodpfx Asxxvtuskielh Headstock capabilities: # Max. distance from spindle to table: 650 mm # Spindle nose: ISO7388 (with internal coolant supply), Tool holder size: 40 # Spindle speed range (standard): 100–14,000 rpm, Max. torque / at 330 rpm: 63.7/89.4 Nm Automatic tool changer: # Number of tools: 20, Selection system: sequential/random, Max. diameter (adjacent tool): 85 mm, Max. diameter (non-adjacent tool): 135 mm, Max. tool length: 300 mm, Max. tool weight: 6.5 kg # Tool change time: 3 s Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 30 kVA Dimensions: # Floor space required: approx. L 2.1 x W 3.5 x H 3 m # Weight: approx. 4,200 kg Equipment includes: # CNC control: GE Fanuc Series 31i MODEL A # Chip conveyor # Lubrication system # Electrical cooling cabinet # Spindle cooling system # Documentation: Electronic available / printed manual not available Machine status: NOT WORKING # 4th axis broken – repairable – dismantled from machine # Tool changer broken – repairable – dismantled from machine # Hydraulic pump broken – requires complete replacement

Condition: used, Year of construction: 2007, machine/vehicle number: IntNr231675, A high-performance MIKRON UCP 600 Vario 5-axis universal machining center, manufactured in 2007, is for sale. Technical data Working area Travel in X-axis: approx. 600 mm Travel in Y-axis: approx. 450 mm Travel in Z-axis: approx. 450 mm Number of CNC axes: 5 5-axis machining: yes Rotary/swivel table: NC-controlled Rotary/swivel table Table diameter: approx. Ø 450 mm Max. workpiece/table load: approx. 200 kg B-axis / swivel range: approx. -115° to +30° C-axis / rotary range: 360°* Main spindle Tool interface: HSK-A63 Max. spindle speed: up to approx. 20,000 rpm Spindle hours: approx. 15,015 h Tool changer Automatic tool changer: available Tool interface: HSK-A63 CNC control Control manufacturer: HEIDENHAIN Control: iTNC 530 Nsdpjz E N T Sofx Akiolh Coolant system Chip conveyor Mains voltage: approx. 400 V / 50 Hz The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231232, Hermle C600 U, year of manufacture 2004 Spindle new, with commissioning report Control system: - Heidenhain iTNC 530 - Control system operating hours: 68026 - Machine operating hours: 81237 Nedpfx Akoz E Rb Doiolh - Spindle operating hours: 12429 Spindle: - Speed: 16,000 rpm - Tool holder: SK-40 - 30 tool magazine positions Equipment: - Rigid clamping table - NC rotary table, 4th axis (iTNC) - Coolant system - Chip conveyor: none - Electronic handwheel (iTNC) - Tool breakage monitoring - Chip flushing nozzle - Foot switch for clamping/unclamping - Hydraulic unit for clamping/unclamping Travel paths: - X-axis (longitudinal): 600 mm - Y-axis (transverse): 450 mm - Z-axis (vertical): 450 mm Table: - Clamping area: 800 mm x 465 mm - Maximum table load: 250 kg Axes: - Axis rapid traverse: 35 m/min - Acceleration: 5 m/s² - Measuring system X/Y/Z: 0.1 µm Dimensions & Weight: - Machine weight: approx. 6.8 t - Machine dimensions (W x D x H): 2.5 m x 2.4 m x 2.43 m The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: used, Year of construction: 2003, machine/vehicle number: IntNr231676, A high-performance and precise MIKRON UCP 800 Duro 5-axis machining center, manufactured in 2003, is for sale. Technical data Working area Travel in X-axis: 800 mm Travel in Y-axis: 650 mm Travel in Z-axis: 500 mm Number of CNC axes: 5 5-axis simultaneous machining: yes Control: HEIDENHAIN iTNC 530 Rotary table CNC-controlled rotary/tilting table Table dimensions: approx. 600 × 600 mm Max. table load: approx. 500 kg Rotary axis C: n × 360° Tilting axis A: approx. -100° to +120°, depending on the machine version Main spindle High-performance spindle: STEP-TEC motor spindle Max. speed: 20,000 rpm Tool interface: HSK-A63 Spindle operating hours: approx. 22,000 h Spindle cooling: water-cooled Tool changer Njdez E N Txopfx Akislh Tool magazine: 30 tool positions Tool interface: HSK-A63 Feed rate / dynamics Rapid traverse X/Y/Z: up to approx. 30 m/min The machine can be inspected on-site by prior arrangement. Subject to changes, errors and prior sale!

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Machine Benefits Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours Nsdpox D Skmofx Akiolh

Condition: used, Year of manufacture 1997 2 grid tables Working area X 3,900 mm Working area Y 1,600 mm Working area Z 200 mm Nedpfsw Uf N Sex Akiolh Additional images available

Condition: ready for operation (used), Year of construction: 2007, overall weight: 27,000 kg, spindle speed (max.): 6,000 rpm, This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, it's ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine. • Axes: 4 • Maximum Machining Area X/Y/Z: 1000 mm x 900 mm x 1000 mm • 4th Axis: 360° x 1° • Rapid Feed Rate: 30 m/min – 12 m/min • 1° B-axis • Drive Power/Max. Torque: 37 kW 10 min, 26 kW continuous load / 606 Nm • Tool Positions: 150 • Tool Holder: MAS BT 50 • ConSep System • Measuring Probe • Tool Breakage Monitoring • Pallet station with 6 pallets, pallet size 630 x 630 mm • External cooling/internal cooling 20 bar/internal air Dimensions Machine Depth 10500 mm Nodpfx Akszycdceiolh

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2434, nominal power (apparent): 16 kVA, input voltage: 400 V, 4.5 kW spindle (2800-18000 rpm) pneumatic rotary table -90 °, 0 °, +90 °, intermediate angles manually set 4 pneumatic clamps pneumatic bumpers quick tool change system cooling system Windows 10 touchscreen operator panel with online access automatic tool diameter correction Nlsdswgmxtopfx Akijh axes operating on linear bearings, brushless motors axes working range: X – 3050 mm, Y – 410 mm, Z – 300 mm, I – 180°

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, Manufacturer PAMA, Italy Nedpsztqf Isfx Akislh Model AT 130 CNC Condition IN WORKING Spindle Diameter 130 mm ISO 50 Spindle rpm 3000 'X' Axis Travel 3500 mm 'Y' Axis Travel 2200 mm 'Z' Axis Travel 2100 mm (COLUMN TRAVEL) 'W' Axis Travel 750 mm (SPINDLE TRAVEL) 'B' Axis Travel 0.001° Change Pallet Table Size 2000 mm X 1600 mm (2Nos) Table Load Carrying Capacity 12 tons ATC 80 tools CNC SIEMENS

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 /100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120/ 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrobroche Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18 000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrobroche Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9000 [rpm] * Spindle power : 0.25 [kW] * Spindle type : Electrobroche Ø120 - Number of spindles : 1 - Tool holder type : HSK40 * Spindle speeds : 8710 [rpm] * Spindle power : 3.8 [kW] * Spindle type : Electrobroche Ø38 - Number of spindles : 2 - Tool holder type : ISO10 * Spindle speeds : 9000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] - Equipment EQUIPMENT - CNC : Siemens - Cooling unit Nodjw Huhcjpfx Akielh - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120 - Loader - Fire-fighting device - Fitting

Condition: used, TECHNICAL DETAILS - Number of axes : 48 - Number of posts : 16 - Number of units : - Number of possible horizontal units : 16 - Number of possible vertical units : 7 - Max. diameter : 45 [mm] - Max. part width : 150 [mm] - Basis unit GM50/150 : * Stroke Z : 150 [mm] * Spindle power : 5 [kW] * Spindle speed : 0 - 8000 [Rpm] - Slide X/Y : * Strokes X : +/- 40 [mm] * Strokes Y : +/- 20 [mm] - Dimensions : 14000 x 4800 x 3000 [mm] - Weight : 13 [t] - Number of hours : 4283 [h] EQUIPMENT - Control CNC Bosch Rexroth INDRAMOTION MTX-L85 - Post 1 : * sawing unit 52/100 3 axes - Post 2 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 3 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 4 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 5 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 6 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 7 : * slide 50/150 manual adjustment ref 22.10.002.1 * unit recessing ref 22.42.041.1 - Post 8 : * slide CNC 50/150 ref 22.10.001.4 (2001) * unit CNC 50/150 ref 22.42.001.6 (with CNC turning function) Nlodju N Ivqepfx Akish - Post 9 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.039.2 - Post 10 : * slide 50/150 manual adjustment ref 22.10.002.1 * recessing unit ref 22.42.039.8 - Post 11 : * slide CNC 50/150 ref 22.10.001.4 * unit 50/150 ref 22.42.001.6 (CNC turning function) - Post 12 : * slide 50/150 ref 22.10.002.1 * recessing unit ref 22.42.041.1 - Post 13 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.041.1 - Post 14 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) - Post 15 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Post 16 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Bar feeder length 4 m - Coolant tank KNOLL (2000 Liters) with HP pump 60 [bars] - Chips conveyor

Condition: used, TECHNICAL DETAILS - Posts number : 12 - Table indexing : 12 x 30 [°] - Collet type : SCHAUBLIN W25 - Max. clamping diameter : 25 [mm] - Max. part length : 100 [mm] - Supply voltage : 3x 400 [V] - Installed power : 32 [kW] - Machine dimensions : 2700 x 2700 x 2500 [mm] - Weight : 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Post 1, bucking - Post 2, longitudinal drilling 30/60 - Post 3, longitudinal drilling 30/60 - Post 4, CNC turning 2 axes - Post 5, turnaround Nlsdpfxeuhbwcj Akish - Post 6, radial drilling 30/60 - Post 7, CNC turning 2 axes - Post 8, inclined drilling 30/60 - Post 9, radial drilling 30/60 - Post 10, inclined drilling 20/50 - Post 11, radial drilling 20/50 - Post 12, longitudinal drilling 30/60 - Ejection between the posts 12 and 1 - Part band conveyor - Chip conveyor KNOLL 450 K-1/2000 - Lubrication tank KNOLL KTS-25-60-T - Pump HP : 40 [bar] - Filtration KNOLL VRF 500

Condition: used, TECHNICAL DETAILS - Posts number : 16 - Indexing time : 0,7 [s] Nedpfouhbwisx Akislh - Max. bar diameter : 32 [mm] - Clamping type : collet VB 32 - Max. part length : 150 [mm] - Max. number of horizontal units : 16 - Max. number of vertical units : 24 - Max. number of all units : 24 - Electrical supply : 400 [V] - Installed power : 40 [kW] - Dimensions : 9,8 x 4 x 2,9 [m] - Weight : 6 500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 turning units CNC 2 axes - Band part conveyor - Chip conveyor - Lubricating tank - Filtration