Horizontal machining center

FAMUP MF 650

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible. Ledpfx Adjwbuyzs Ejrh

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m Ledpfsw Rkt Iox Ad Eorh incl. accessories see picture *

Year of construction: 2007, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, number of axes: 5, This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. Ledpfx Adex Imtao Esrh • Control system: NCT-104 • Table: rotary, 1800 × 1800 mm • W (spindle quill): 570 mm • Spindle diameter: 130 mm

Condition: ready for operation (used), Year of construction: 2020, operating hours: 3,300 h, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 900 mm Z-AXIS TRAVEL: 1000 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 1100 mm RAPID FEEDS X-Y-Z: 60 m/min SPINDLE: 10000 rpm; 25-45 kW; 600 Nm; ISO 50 - BT PALLET: N.2 ; CONTINUOUS ; 630x630 mm MAX ADMITTED LOAD: 1500 Kg MAX MACHINABLE PIECE DIMENSIONS: ø1050 x 1350 mm TOOL MAGAZINE: CHAIN-TYPE ; 90 POS CONTROL UNIT: FANUC 31i WEIGHT: 18000 Kg Lrsdpfx Adexvfuvs Esh OVERALL DIMENSIONS: 6520 x 3930 x 3495 mm ACCESSORIES: SWARF CONVEYOR ; TOOL SETTER

Condition: good (used), functionality: fully functional, Year of construction: 1995, operating hours: 32,518 h, control type: CNC control, pressing force: 250 t, Bending length [mm]: 3550 Pressing force [t]: 250 Control: Cybelec DNC 906 PS A Operating hours [h]: 32,518 - Hydraulic quick clamping for punch and die - Hydraulic crowning system via CNC - 2-axis CNC backgauge (X and R) - 4 manually adjustable backgauge fingers Lredsxcmwrjpfx Ad Ejh - 2 movable bending aids - Comprehensive tooling package

Condition: good (used), Year of construction: 1998, CNC: FANUC 16MC + Professional 3 Pallet dimensions: 2 x 800 x 800 mm X/Y/Z axes: 1250 x 1050 x 810 mm Spindle speed: 4 500 rpm EQUIPMENT: 2 pallets, dimensions 800 x 800 mm, NC indexing table 0.001°, B axis 120-place tool changer Swarf conveyor 30-bar high-pressure spindle coolant Lrjdpfet Up Ecex Ad Esh Renishaw probe

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Lrjdpfx Adjxm Sxvo Eoh Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: used, Year of construction: 2015, turning diameter 250 mm turning length 600 mm control FANUC Series 31i-Model A travel -x axis 180 mm Lsdpfex I Shpox Ad Ejrh travel -y axis +/-45 mm - - - - - Main spindle - - - - - - - - - - - turning speeds 0 - 5.000 U/min bar capacity 65 mm --- Subspindle --- - - - - - - turning speeds 0 - 7.000 U/min bar capacity 42 mm --- upper turret 1 --- - - - - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X1 / Y1 / Z1 St. Tools speed 8.000 U/min --- upper turret 2 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Tools speed 8.000 U/min Number of axles X3 /Y3 / Z3 St. --- lower turret 3 --- - - - numbers of positions in the tool changer 12 tool taper BMT 45 Number of axles X2 / Z2 St. Tools speed 8.000 U/min CNC Turning- and Milling Center | SPINNER - TTS 65 Triplex equipped with a main spindle and a sub-spindle, each including a C-axis, three triplex turrets designed for driven tools, as well as a bar feeder (Top Automazioni X-Files-S Series 3000, SX version). The machine has only 3.500h processing time hours. The machine is in good condition and can be inspected under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TTS65Triplex | TTS 65Triplex | TTS-65-Triplex | TTS-65 Triplex

Condition: used, Technical details: spindle diameter: 120 mm x-travel: 1250 mm y-travel: 1250 mm z-travel: 800 mm W-axis (spindle longitudinal): 600 mm Speed of boring spindles: 1- 2000 U/min. spindle taper ISO: 50 table surface area: 1000 x 1000 mm Lrjdpfx Adoxt El Ao Ejh total power requirement: 55 kW weight of the machine ca.: 18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment *

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. Lsdpfx Aox Hn D Ded Ejrh - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement