Used machining centers (horizontal) X-axis travel 800-999mm for sale (54)

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 970 mm, table load: 1,200 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Caodoxyiirjpfx Abbja Travel X-axis: 900 mm Travel Y-axis: 800 mm Travel Z-axis: 970 mm Spindle speed: 12,000 rpm Distance between spindle center and table top: 100 – 900 mm Distance between spindle head and pallet center: 70 – 1,040 mm Spindle taper: HSK 100 Table size: 630 x 630 mm Table load capacity: 1,200 kg Max. workpiece diameter: 1,000 mm Max. workpiece height: 1,300 mm Tool changer: 90 positions Minimum increment: 0.001 mm Creep feed: 1 – 4,000 mm/min (23 steps) Cutting feed: 1 – 50,000 mm/min Rapid traverse: 50,000 mm/min Pallet change time: 17 s MACHINE DETAILS Electrical data Operating voltage: 400 V, 3-phase, 50 Hz Total current: 98 A Incoming cable cross-section: 35 mm² Main fuse: 100 A Note: 2 trucks are required for transport.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 13,812 h, functionality: fully functional, machine/vehicle number: 108877, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 850 mm, table load: 800 kg, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 900 mm Y-axis: 780 mm Z-axis: 850 mm Distance from spindle center to pallet surface: 50 – 950 mm Distance from spindle nose to pallet center: 70 – 850 mm Pallet Pallet size: 500 × 500 mm Indexing angle: 1° Max. workpiece dimensions: 800 × 1,000 mm Max. workpiece weight: 800 kg Spindle Spindle speed: 50 – 20,000 rpm Spindle taper: HSK Rapid traverse & feed rate Rapid traverse (X/Y/Z): 60 m/min Feed rate (X/Y/Z): 1 – 60,000 mm/min Tool system (ATC) Tool holder: HSK Max. tool diameter (adjacent tool): 100 mm Max. tool diameter (no adjacent tool): 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg MACHINE DETAILS Dimensions & Weight Machine height: 3,280 mm Footprint (W × D): 3,080 × 5,585 mm Weight: 21,000 kg Operating Hours Spindle hours: 13,812 h Operating hours: 15,544 h Power-on hours: 33,469 h EQUIPMENT 2-pallet rotary table (APC) Splash guard Coolant supply system Chip air blow (nozzle system) Internal chip conveyor (floor-based system) Spindle head cooling system Worklight (fluorescent) Cjdpoxyiq Nsfx Abbeaa Signal tower (3-stage) Foundation pads Clamping bolts

Condition: good (used), Year of construction: 2009, Traverses XYZ 850 x 700 x 750 mm, Pallet size 500 x 500mm, pallet load 500 kgs, 60 ATC, Caodpfx Aewq Iwxebbja BT40 spindle taper, Fanuc 31i- control. Spindle power 22Kw, B axis 0.001 Degrees, 14000 rpm spindle, swarf conveyor, Through Spindle Coolant.

Condition: used, Technical details: Caodpfjx A Sziox Abbsa x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm speeds:: 6000 U/min table:: 500 x 630 mm with tool changer: 40 Plätze spindle taper:: SK 50 total power requirement: 25 kW weight of the machine ca.: 11500 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Caodpfx Abevta Sbobja Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: excellent (used), FANUC Professional 6 Control Working travels 900 x 900 x 1020 mm Tool changer with 136 Positions Spindle speeds -10'000 rpm Spindle taper HSK100 Cjdpfxjx A E Eno Abbeaa 2 paletts 630 x 630 mm B-axis 0.001° Palett changer FASTEMS FPC1500 Cooling through spindle 3D measuring taper Tool breakage control device Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 1998, Fanuc System 16 MC control Travel paths X/Y/Z 800/750/770 mm Spindle speed 20,000 rpm Tool magazine for 132 tools HSK A-63 Dual pallet changer 630x630 mm Cedpfx Abewwkh Teboaa Knoll system with internal coolant supply Chip conveyor

Condition: used, Year of construction: 2002, Technical details: spindle speed:: max. 12000 tool taper: HSK 80 . b-axis: 360 x 0,001 ° worktool support (A-axis): ° weight of the machine ca.: 25 500 Kgs. x-travel: 800 mm y-travel: 700 mm z-travel: 630 mm dimensions of the machine ca.: 6200 x 3000 x 3200 mm pallet size:: 500 x 500 mm Caodpfewdywdsx Abboa no. of tools in the magazine: 61 Nos. Weight approx.: 23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle *

Condition: used, Standard Machine Specifications Table: Working surface: 305 x 305 mm Max. workpiece capacity: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Axis: 0.001° – 360° Distance from table top edge to spindle center: 40 - 550 mm Distance from table center to spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Speed: 20 – 20,000 rpm Drive: 4-stage gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of the 4th axis: 0.6 seconds Cutting feed rate X-, Y-, Z-axes: 40,000 mm/min Tools: Tool positions: 40 Tool selection method: direct control, bidirectional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Cooling system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 KVA, 200 V AC, 3 phases Caedpfx Asv Si Suebbea Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control system: Fanuc 16iMB Standard machine accessories Spindle with 20,000 rpm and 4-speed gearbox (2-speed gear drive, 2-speed electronic gearbox) 2 spindle bearing compensation within 0.005 mm (IAC system 1) Big Plus spindle (contact in the taper and on the Front face) Automatic spindle cleaning with compressed air Coolant through spindle at 15 bar and its own pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of the X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool location: each tool is coded independently of the machine and identified in the magazine Original Kitamura tool hold function through T-code pre-selection Automatic pallet changer, 180° reciprocating (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip conveyor belts for coarse and small chips, with filter system Chip flushing at the bottom with a separate 1,200 W pump Fully enclosed Enclosure Automatic central lubrication of the guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light End of cycle lamp Compensating thread cutting 4 free M functions, M20 – M23 Pivoting control panel Portable handwheel RS 232C interface PCMCIA interface Door lock Emergency stop switch on the tool magazine Manual indexing switches on the tool magazine Self-diagnosis function

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 5584 mm Machine weight 16000 kg Measurements height 3342 mm Measurements depth 3693 mm Control Unit Brand FANUC Main Drive Number of axis 4 Caedpjxl H A Tofx Abbsa Tool taper BT 50 Spindle Speed 10000 RPM Movement X-Axis Movement 900 mm Z-Axis Movement 1020 mm Y-Axis Movement 800 mm Tools Number of index 40 or 60 Max tool diameter 115 mm Max tool length 600 mm Max weight 30 kg This 4-axis Makino a81 horizontal machining center was manufactured in 2011. It features a robust 630×630 mm pallet, capable of handling a maximum load of 1200 kg, and a spindle speed range of 20−10000 min−1. The machine offers a rapid traverse rate of 50000 mm/min, enhancing productivity. Ideal for complex machining tasks, consider the opportunity to buy this Makino a81 horizontal machining center. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2008, operating hours: 61,112 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 250 with RSP Operating hours: 61112 Year of construction: 2008 Control unit: Siemens 840D PL Cedpfx Abjxwpi Tobjaa Spindle: 6.000 rpm Tool clamping system: HSK 100 Tool magazine / places: Rack / 234 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 800 / 800 / 800 Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Additonal options: Fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; alternative strategy; Integrated process monitoring (IPM) and collision monitoring; 3 colour status lamp; RSP 4-fach; tool cleaning; MCIS TDI tool planning; Feed force display; MCIS DNC; spline-interpolation; cycle 800;

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t Cedpfx Aexvw Rpsbbeaa spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Year of construction: 1997, condition: good (used), Control uni-Pro CNC 90 Travel X/Y/Z 800/800/710 mm Spindle speed 4500 rpm Tool magazine for 52+120 tools SK 50 Indexing table 1° Cedpfx Abslkgfasbjaa 4-fold pallet changer 500x630 mm chip conveyor

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm Caodpfewix Hhex Abbsa 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Standard Specifications of the Machine Table: Working area: 305 x 305 mm Max. workpiece volume: Ø 500 mm x 560 mm Max. table load: 250 kg Travel: X-axis: 510 mm Y-axis: 510 mm Z-axis: 490 mm Rotary axis: 0.001° – 360° Distance table top – spindle center: 40 - 550 mm Distance table center – spindle nose: 100 - 590 mm Spindle: Spindle taper: NST No. 40 Spindle speed: 20 – 20,000 rpm Drive: 4-step gearbox (2 mechanical, 2 electric) Max. torque: 157 Nm Feed: Rapid traverse X, Y, Z-axis: 50,000 mm/min Rapid traverse 4th axis: 9,000°/min 90° rotation of 4th axis: 0.6 seconds Cutting feed X, Y, Z-axis: 40,000 mm/min Tools: Tool positions: 40 Tool selection: direct, bi-directional Tool holder: BT (SK) 40 Max. tool diameter: 95 mm (150 mm if adjacent positions are empty) Max. tool length: 300 mm Max. tool weight: 10 kg Tool change time (tool-to-tool): 1.7 seconds Tool change time (chip-to-chip): 5.0 seconds Motors: Spindle motor (30 min./continuous operation): 11.0 kW AC Tool changer motor: 400 W AC Coolant system motor: 1,200 W AC Pallet: Pallet change time: 6.0 seconds Other: Power supply: 25 kVA, 200V AC, 3-phase Air supply: 5 bar, 330 l/min Dimensions: Machine height: 2,940 mm max. Footprint with chip conveyor: 3,492 mm x 3,173 mm Weight: 9,900 kg Control: Fanuc 16iMB Standard Accessories Spindle with 20,000 rpm and 4-step gearbox (2-speed gear drive, 2-speed electronic gear) Caedew Al Tbopfx Abbsa 2-Point spindle bearing compensation within 0.005 mm (IAC System 1) Big-Plus spindle (contact in taper and face) Automatic spindle taper cleaning with compressed air Through-spindle coolant at 15 bar with separate pump Spindle bearing lubrication system (air-oil mixture) Spindle cooler Automatic lubrication of axis ballscrews in X, Y, and Z axes Automatic high-speed tool changer with 40 tool stations Fixed tool position: each tool is independently coded by the machine and identified in the magazine Original Kitamura tool wait-release function via pre-selection of the T-code Automatic 180° pallet changer (2 stations) Coolant pump 1,200 W Double-deck chip conveyor with 2 chip belts for coarse and fine chips, with filter system Lower chip flushing with separate 1,200 W pump Fully enclosed guard Automatic central lubrication of guideways Air FRL unit (filter, regulator, lubrication) Hydraulic power unit with tank Work light Cycle end lamp Tapping without compensating chuck 4 free M-functions, M20 – M23 Swiveling control panel Portable handwheel RS 232C interface PCMCIA interface Door interlock Emergency stop at tool magazine Manual index switches at tool magazine Self-diagnostic function

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min Cedpfjxtfz Dox Abboaa power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: new, Year of construction: 2023, functionality: fully functional, with 8 pallets Fanuc M-Pro1 (0i-MF Plus) control system Travel X/Y/Z: 800/800/860 mm Rapid traverse X/Y/Z: 74/74/74 m/min Pallet size 500 x 500 mm Load capacity: 550 kg per pallet Workpiece size: Ø800 x H1,000 mm Tool holder: BBT 40 Cjdpfxsuafl Is Abbjaa Number of magazine positions: 220 Max. Tool diameter: Ø95 mm Max. Tool diameter with free neighboring pockets: Ø185 mm Max. Wkz. length: 400 mm Max. Tool weight: 8 kg Spindle cone: BBT40 Big Plus™ Speed: 15,000 rpm Chip spirals on the right and left in the machine Coolant through the spindle Dual chip conveyor Fully-fledged 4th axis from PARKSON 50 kvA transformer

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm Cedpfjxvw Nlox Abbeaa C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, machine/vehicle number: 61612677, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik, overall weight: 10,000 kg, No reserve price – sale guaranteed to the highest bidder! The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel range X-axis: 850 mm Travel range Y-axis: 500 mm Csdpfsxm Ucdjx Abboaa Travel range Z-axis: 500 mm Control unit: Siemens Sinumerik MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,500 x 4,000 x 2,500 mm Total weight: 10,000 kg EQUIPMENT NC rotary table Documentation Note: The clamping tower on the pallet table is not included in the scope of delivery.

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm Caedpfx Abjpumdcobea spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The machine is in good technical condition. X-axis travel: 900 mm Y-axis travel: 500 mm Z-axis travel: 450 mm 4 axes Control: Fanuc FS31i Spindle speed: 20-20,000 rpm Table: - External length: 1,000 mm - External width: 500 mm - Maximum table load: 1,000 kg Codpox Dazyofx Abbjaa New electric spindle installed 4 years ago. Tool magazine for 30 tools, incl. tool holders. The machine operated in single-shift operation. Inspection under power possible by prior arrangement.

Condition: good (used), Year of construction: 2005, KITAMURA CNC MYCENTAR 5 YEAR OF CONSTRUCTION 2005 CHANGING TABLE X-travel 1200 mm Y-travel 560 mm Z travels 560 mm Csdpfxou Sznpj Abbjaa Type Vertical CNC FANUC 16MA Table length 1200 mm table width 500 mm Tool changer 30 Spindle cone BT 40 Max. Spindle speeds 10000 rpm Weigth 11,000 kg Machine length 6.007 mm Machine width 2,830 mm Machine height 3.305 mm

Condition: good (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, nominal power (apparent): 61 kVA, controller manufacturer: Mazatrol, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 900 mm, workpiece weight (max.): 1,000 kg, total height: 3,200 mm, total length: 6,100 mm, total width: 3,500 mm, table width: 500 mm, table length: 500 mm, overall weight: 18,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 7,000 rpm, spindle motor power: 26,000 W, Equipment: chip conveyor, Dear Sir or Madam, Cajdjxf T Txjpfx Abbja we are offering you a used CNC horizontal machining center "MAZAK" in good condition. Please refer to the attached file for details.

Condition: ready for operation (used), Year of construction: 1999, Make: DECKEL MAHO Type of machine: DMC 80 H / RS4 Year of manufacture: 1999 Control system: Siemens 840 D Machine's weight: 18,5 t Tool holder: SK 50 x-travel: 800 mm y-travel: 710 mm Cjdpfxexni Uqj Abboaa z-travel: 710 mm Speed range: 10.000 1/min Overall dimensions: 9,0 x 5,0 x 3,0 m Table dimensions: 400 x 500 mm Number of tools in the magazine: 180 (2x 90) pos Internal coolant supply: 40 Bar : x

Condition: used, Technical details: Caedpfjwix E Rex Abboa x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *