Used Transfer Machine for sale (65,680)

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Serial Number 5531 Year 1988 Redpfedg Da Isx Aa Uop Pristine Condition Not been used for 15 years

Condition: used, Year of construction: 2005, Type: Multispindle machine Make: Buffoli Model: 2D-TRIB10-6 CNC Redpfxoyn Hf Uo Aa Usp Year of Manufacture: 2005 Condition: Used Quantity: 1

Condition: good (used), Year of construction: 2010, Rotary table Fabr.WEISS Type: TC 220T Year: 2010. Redpfx Aasxr Dh Hj Usp

Condition: good (used), Year of construction: 2003, functionality: fully functional, coolant tank capacity: 2,000 l, Used, well-maintained transfer machine / rotary indexing table machine / dial-type machine MIKRON MULTISTAR CX 24 Availability: immediately The following modifications have been carried out on the system: Machine: - All motor cables replaced. - All sensor cables replaced. - PLC program adapted to enable and disable collets. - Converted to Knoll coolant system. - Wiring diagram manually modified. - Frequency inverter replaced. - Part selector installed on the machine, including oil pump for oil return. Saw: - Saw control converted to Mitsubishi i-QR control system. - Complete electronics of the saw renewed. - Saw fully mechanically overhauled. Accessories: - 1 x loading station (brass D = 3.9 mm) - 1 x unloading station - 1 x part selector (8-position, see picture) - 1 x lateral drilling unit - 1 x rotary straightening device (fully newly mounted October 2023) - 1 x feed / saw unit (control and inverter overhauled in 2021) - 1 x pneumatic loader (via feed tube) - 1 x chip conveyor with dirty water pump (without chip trolley) - 1 x KNOLL coolant system (2,000 liters) with drum screen filter, wash pump, and vacuum pump, including low-pressure pump (5 bar) and high-pressure pump (60 bar) The machine has been operated with cutting oil. Redpfsyk Hraex Aa Ujp If you have any questions or require further information, feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2012, A rotary table transfer machine Porta Solutions is available. Stations: 6, connected load: 41kW, max. spindle speed: 4500rpm, total system weight: approx. 13500kg. Spindle unit FMU 110, machining process: fixed turning, quill diameter: 110mm, max. tool advance stroke: 200mm, power: 4kW, tool holder: ISO40, feed rate: 6m/min, rapid traverse: 20m/min. 2) Spindle unit FMU 110, machining process: turning/grooving, quill diameter: 110mm, max. tool stroke: 200mm, spindle power: 4kW, tool holder: ISO40, feed rate: 6m/min, rapid traverse: 20m/min. 3) Spindle unit FMU 110, machining process: turning/thread tapping, quill diameter: 110mm, max. tool advance stroke: 200mm, spindle power: 6kW, tool holder: ISO40, feed rate: 6m/min, rapid traverse: 20m/min. Including control cabinet, hydraulic unit, chip conveyor, filtration unit and coolant tank. Documentation available. An on-site inspection is possible. Rjdpeyi E Evjfx Aa Uep

Condition: ready for operation (used), Two identical rotary transfer machines Eubama including filtration systems are available. Workpiece diameter: 60mm, workpiece length: 320mm, clamping stations: 10, cycle rate: 20/min, spindle stroke: 100mm, drilling capacity steel/brass: 20mm/30mm, threading capacity steel/brass: M30/M40. Documentation available. An on-site inspection is possible. Rjdpfx Aew Hglmsa Ujp

Condition: ready for operation (used), Year of construction: 1999, There are 4 almost identical Pfiffner CNC rotary transfer machines available. Years of construction: approx. 1999, control: Siemens S5/Siemens HME, stations: 12, process: sawing/feed/turning, operating hours: approx. 8500 hours: Sawing/feed/turning, operating hours: approx. 85383. Including loader, switch cabinet, chip conveyor, cooling lubricant system and a total of approx. 35 processing units. Documentation available. On-site inspection is possible. The machines are dismantled and stored, but it is possible to see similar machines in operation. One machine is incomplete and suitable as a spare parts carrier. Rsdpswv Um Dofx Aa Usp

Condition: ready for operation (used), Year of construction: 1997, A rotary transfer machine for the production of spherical ladles is available. Machining stations: 13, bar loader: 0433, bar loader length: 3000mm, machine power: 40kW, control: Hydromat. Including Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B lubricant preparation system and separate Knoll chip disposal system. The machine was extended to SW milling in 2015. Documentation available. On-site inspection is possible. Rodpeu T Rg Refx Aa Uep

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Rsdpfxow Emx Re Aa Uep

Condition: ready for operation (used), A Baader Lino poultry buffer system is available. Rodpfx Aaot Nhmue Uop

Condition: ready for operation (used), Year of construction: 2002, Stations: 6, power: 40kW, control: Siemens. Including upstream Fischer separating head, Festo feeder, material discharge conveyor, Knoll 450K-1 chip conveyor, year of manufacture: 2004, chip preparation with ejector and hydraulic unit. Documentation available. On-site inspection is possible. Redpeu T Rhbofx Aa Usp

Condition: ready for operation (used), Year of construction: 2012, A special-purpose rotary transfer machine for aluminum processing, rebuilt by Stöferle, is available. 1) Complete machine, connected load: 120kW, hydraulic pressure: 50bar, pneumatic pressure: 6bar, transport width: approx. 2600mm, stations: 8, machine dimensions X/Y/Z: approx. 3000mm/2600mm/2800mm, weight: approx. 9500kg. 2) Coolant system Knoll with scraper belt conveyor, year of manufacture: 2010. 3) Hydraulic system Hydropa. 4) Pneumatic system Festo. 5) Central lubrication system ALS. Documentation available. An on-site inspection is possible. Rsdpfow Rqw Tox Aa Uep

Condition: used, Year of construction: 2011, functionality: not functional, total height: 2,500 mm, total length: 12,000 mm, total width: 4 mm, power: 65 kW (88.38 HP), overall weight: 10,305 kg, bar diameter (max.): 110 mm, pipe diameter (max.): 110 mm, turning length: 350 mm, workpiece diameter (max.): 110 mm, Equipment: documentation/manual, We are offering this used Sinico SIN-O-MATIC TOP 2000 cutting and end-finishing machine, year of manufacture 2011. Model: SIN-O-MATIC TOP 2000 Type: TR110/2-350-CL-S CNC Serial number: 1459 Year of manufacture: 10/2011 Weight: 7,200 kg (plus magazine) Workpiece diameter: 110 mm Maximum workpiece length: 350 mm Installed power: 65 kW max CNC control by NUM Automatic machine for cutting to length and end-finishing. Transfer machine with horizontal axis table for cutting and end-processing of tubes and bars. Flexible and highly adaptable CNC machine. It ensures high productivity, up to 2,500 parts/hour, and is designed for processing small to large workpieces: bar diameters up to 110 mm, finished part lengths up to 350 mm. Maximum versatility for machining tubes and bars. The machine is capable of performing the following operations: Chamfering – Face milling – Thread cutting – Forming – Marking Various spare parts, clamping jaws, and accessories are included. Rodpfx Aaoycr Nhe Usp The machine is still assembled but has a fault, which is why it cannot be shown under power. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, Flexbility: Rjdpfxeyg Nwdj Aa Usp Our Rotaflex machines stand out due to their exceptional flexibility, surpassing that of competitors. These machines are versatile, capable of performing a variety of operations including turning, milling, threading, and recessing. Each station operates independently with up to 5-Axes, ensuring efficient and precise machining. Advanced Turning Capabilities: Rotaflex machines are designed for real turning operations, featuring chucks that can simultaneously position on the B axis and perform turning at speeds up to 6,500 RPM. Please find the demonstration videos below: Innovative Plug-and-Run Chucks: Our Plug-and-Run Chucks enable swift chuck changes within seconds, allowing for seamless transitions between jobs. This technology sets Technica apart in the rotary transfer machine industry. Why Choose Technica Rotaflex Machines: Technica machines offer unparalleled versatility and precision, making them ideal for mass production environments that demand high-quality and adaptable machinery. Combining Swiss engineering precision with the multifunctionality, our machines provide reliable and efficient performance.

Condition: ready for operation (used), Length: 8225mm, width: 3200mm, with documentation. Rjdpji Ew Dpjfx Aa Usp

Year of construction: 2015, condition: ready for operation (used), Max. workpiece diameter: 42mm, connected load: 132kVA, length: 4600mm, width: 7500mm, height: 3000mm, with bar loader. Rsdpfxop S Sq Ds Aa Ujp

Condition: used, Technica brand, Stemoflex model rotary transfer machine Rsdpfx Aoydcm Hsa Usp

Condition: used, _____ 2 Pieces of Pfiffner RT 100-12 Description: Year of manuf. : 2013 Control : Siemens 840 D Rotary-Indexing-table/Spindle: Clamping stations:12 motorised spindles Drive:Torque drive, water-cooled Position measuring system:Direct Switching time:1.5 seconds Spindles:Water-cooled motor spindles C-axes:0.001°, hydraulic clamping Speed:5,500 rpm Power:11 kW Clamping device:Chuck Basic modules: Technology:Positioning module, 3-axis X-axis:50 mm Y-axis:100 mm Z-axis:100 mm Position measuring systems:Direct in all axes Coolant supply:Integrated : : Workpiece size (max.):100 x 100 x 100 mm Station 1: Horizontal:feeding of raw parts (indexing conveyor + Stäubli robot) Rsdpfx Aaow Si T As Ujp Vertical:Measuring raw part Station 2: Horizontal:4-fold turret without drive Vertical:Measuring reclamping error (C-axis zeroing) Station 3: Horizontal:4-fold turret without drive Vertical:Not used Station 4: Horizontal:4-fold turret without drive Vertical:Not used Station 5: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 6: Horizontal:4-fold turret without drive Vertical:Not used Station 7: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 8: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 9: Horizontal:4-fold turret without drive Vertical:Not used Station 10: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:Not used Station 11: Horizontal:6-position turret with WAN, 10,000 rpm Vertical:6-position turret with WAN 10,000 rpm Station 12: Horizontal:Charging/discharging unit with double swivelling gripper + discharging belt Equipment: Chipmanagement:Chip conveyor High preassure unit:Cooling unit 50 bar Toolmonitoring:Toolbreaktagecontrol ARTIS Rawmaterialfeed:Conveyorbelt with robot Finishpartremoval:Conveyor with 3-way switch Oilmistseparation:Electrostatic filter Fire extraction system:Kraft + Bauer Part labelling:Laser Parts cleaning:HESO cleaning system

Condition: used, _____ Description: Year of manuf. : 2018 Control : Fanuc 30i-B In General: Year of construction:2018 Control system:Fanuc Processing stations:5 pieces Loading station:1 piece Travelling range: X-axis:450 mm Y-axis:500 mm Rodjvr Az Njpfx Aa Ujp Z-axis:450 mm Rapid traverse X/Y/Z:50 m/min Turret: Number of stations:8 Speed:13,300 rpm Torque:58 Nm Tool holder:HSK 63 C Workpiece/device: Dimensions max.:350 x 350 x 350 mm Max. permissible mass:250 kg Media supply line:6 pieces NC swivelling rotary table: A-axis:+/- 150° B-axis:360° Max. load:250 kg Table diameter:320 mm Equipment: Loading/unloading:Fanuc Robot M20i-A Chip removal:2x chip conveyors Coolant supply:IKZ system, 20 bar Position measuring systems:Direct in all axes

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch Rsdpfx Aou Idvwsa Uep i.D. *

Condition: used, Technical details: number of spindles: 11 Stück number of stations: 11 Stück taper: SK 40 air pressure - required: 6 - 7 bar total power requirement: 13 kW weight of the machine ca.: 10,2 t space requirements of the machine approx.: 4,0 x 4,0 x 3,4 m dimensions of machine: 3,4 x 3,45 x 2,9 m dimensions electric cabinet: 2,1 x 0,4 x 1,9 mm Transfermachine (drilling & cutting) Accesssories optional please enquire to this additional position! - workpiece holding turret Ø 1000mm with tool holder for 8 tool clamping stations, self centering clamping chuck jaws between the jaws, max. 20mm chuck jaw stroke ( oil pneumatic circulation) - 11 working stations with Sk40 intake (right 4x Drill-& Mill spindle and 1x mitU-axis , left 4x Drill-& Mill spindle ) - drill unit 8x spindle stroke 125mm, feed 0 - 2 m/min, 164 - 1005 rpm with 12 gears stages Rsdpfx Aaeu Idw Io Ujp - thread cutting unit working stroke 125mm, rotation direction clockwise and counter clockwise, 31,5 - 194 rpm with 12 gears stages - opposite located drill units 8 pieces with SK 40 holder - coolant device with supply - control via switch panel - with swarf basin L: 1200 x W: 740 x H: 220mm i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) Rodpfeu Idxfjx Aa Usp - control panel - manual switch i.D. *

Condition: used, Technical details: Rodpfxsu Idv De Aa Usp number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW Rodpfou Idwbex Aa Ujp dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. *

Condition: used, Technical details: spindle taper: SK40 spindle stroke: 175 mm number of spindles: 8 Stück number of stations: 5 Stück cycle time: 15-20 sec revolutions per minute: bohren/drill/taladrar 225...1037 U/min. revolutions per minute: gewinde/threading/roscar 50...316 U/min. Redpfsu Idycox Aa Usp feed: 0,2 m/min total power requirement: 30 (40PS) kW weight of the machine ca.: 9,0 t space requirements of the machine approx.: 3,9x2,4x2,5 m dimensions of machine: L:3,9xB:2,2xH:2,7 m dimensions L x W x H: +Anlage/plant/planta 2,7x2,52x2,25 m The machine will be on a General overhaul (pictures from original condition at the former Company) The machine has been constructed for the metal cutting process of workpieces in one clamping session. Especially blanks made of brass with a diameter 90mm x approx 100mm length would be machined with this machine. description: - workpiece support with switch plate with clamping station type round table with horizontal axis with 5 workpiece stations processing units: - drill spindle and thread cutting units - drill capacity up to 2 3/4" and 81,53mm in brass - thread cutting up to 2 1/2" und metric thread Machine is equipped with a feeding-and unloading unit for workpieces. ( feed capacity 3 -4 pieces/min and cycle time 15 - 20 sec.) furthermore incl. coolant device i.D. *