Used Other deburring machines for sale (47)

Condition: new, Model Name B3 Entgrat-/Anfasmaschine Godpjk Au Drefx Aacokc

Year of construction: 2011, condition: used, Machine No.: 100021094, control system, manufacturer Siemens, 2x 6-axis robots, manufacturer ABB Gksdpfx Ajwufbvoacoc +++ Attention: This machine is part of an online sale! +++

Year of construction: 1979, condition: not inspected (used), Hurth ZEA1 Gear Deburring Machine -WKG 475- Offered here is a gear deburring machine from the company Hurth. Technical data: Manufacturer: Hurth Type: ZEA1 Year of manufacture: 1979 Adjustability of the machining unit: 150mm tool outer diameter: 190-205mm workpiece outer diameter: 20-120mm workpiece length: 150mm Toothing width: 50mm Module for chamfering: 1-4mm chamfer width: 0,7mm Gkodpfx Aashg Nuiscsc Weight: 2t

Condition: used, - Power consumption: 26 kVA 3P400V /N/PE/50HZ; protection 63A - Compressed air connection: min. 5 bar, max. 7 bar - Extraction capacity: min. V = 1700 m³/h at Δp = -850 Pa, min. 20 m/s, follow-up time 15s Godswpkc Iepfx Aacjkc The system has been cleaned, packed by the manufacturer, preserved, and stored. It is complete and ready for operation. The system can be inspected at any time by appointment.

Condition: new, filling capacity 300 kg max. workpiece height 500 x 200 x 20 mm workpiece weight total 200 kg max. workpiece weight 15 kg / Stck. revolutions per minute 22 U/min filling amount 40-50 % Colour blau 5015 RAL 0 624 x 270 mm total power requirement 1,5 kW weight of the machine ca. 650 kg New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included in the price). This are available from Sideros. Sideros ECO dust extraction available at extra cost. The manufacturer recommends taking 100 kg samples of the material to be deburred to be sent to the factory in Italy for test purposes before ordering. Gedet U R Swjpfx Aacskc Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2025, functionality: fully functional, The DMS 2KR was developed specifically for deburring components after laser or saw cutting, based on Flex Trim flap wheel systems. The DMS 2KR machine features two independent units, each controlled by separate frequency inverters. A dedicated support base allows for very fast deburring of the ends of processed parts, such as tubes and profiles of various shapes. The installed columns enable quick and precise adjustment across multiple axes. Electronic speed and rotational direction control allow for optimal processing parameters to be set. The machine is entirely manufactured in Poland by our company, drawing on extensive experience in grinding processes. TECHNICAL SPECIFICATIONS: - Adjustable height - Power: 0.55 kW - Speed controlled by frequency inverter - Two motors - Disc heads - Dust extraction guards included - Base for easy operation - Weight: approx. 140 kg - Dimensions: 1200 x 750 x 1400 mm (W x L x H) ADVANTAGES OF THE DMS 2KR: - Easy installation Gsdpjxhdcpefx Aacskc - User-friendly operation - Delivers excellent, uniform grinding results

Condition: new, Model Name Anfassystem UZ12 ULTRALIGHT Gsdjk D Nyiopfx Aacjkc

Condition: as good as new (ex-display), Edge and contour milling machine Make: Assfalg Model: KKE 1 Condition: Demonstration machine Speed: 8,000 - 24,000 rpm (stepless) Max. chamfer width: 3 mm Standard equipment includes: - Guide ruler - Socket wrench, open-end wrench - Work ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating manual Gsdpfjw Rl Rzex Aacskc

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Godpfx Aod Hintsacjkc Weight (kg) 3300

Year of construction: 2014, condition: ready for operation (used), A deburring system (deburring cell) is available for post-processing metal workpieces using a plastering robot. Documentation available. On-site inspection is possible. Gsdewfg Hujpfx Aacjkc

Year of construction: 2015, condition: excellent (used), Machine for electro-chemical deburring incl. automation, washing system for removing the electrolyte from the parts surface and filtration unit. Gsdpfxelgzbne Aacokc SALE IN EU / SWITZERLAND / UK ONLY.

Condition: new, Model Name Anfassystem B22 ZERO Gkjdpfx Ajk Au Dvoacjc

Year of construction: 2016, condition: ready for operation (used), A specially built Eiberle reaming machine for pipe blanks is available. Stations: 4, cycle time: 3-5min, machine dimensions X/Y/Z: approx. 3900mm/1050mm/1900mm, weight: approx. 1500kg, control: Siemens, part counter: 40317, including a comprehensive tool package. Documentation available. On-site inspection is possible. Gksdpfsv Sufyox Aacsc

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 20 mm speeds 2850 U/min range of angles 0 - 60 (stufenlos) ° weight of the machine ca. 19,5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for the Gjdpfx Aoppgcveacskc so-called FACING - removing an unwanted layer of material on the Front side of the workpiece, which is created, for example, by flame cutting a sheet metal. Specially developed for the production of visible chamfers and weld preparations. Powerful electric drive for extreme Charges. * High performance motor * stepless adjustment of the working angle in the range of 0° - 60° * FACING - Edge processing at an angle of 0° to remove unwanted ones Layers of material after flame cutting * The unique mechanical scale to adjust the bevel width for higher precision * A very compact and ergonomic design for high work productivity * Circumferential protective frame against damage and versatile grip options * With the appropriate accessories, pipes from D= 150 mm can also be processed * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 Mpa / 0 - 16 mm = 400 Mpa - Motor: 1100W

Year of construction: 2007, condition: ready for operation (used), Throughput: 300kg/m², max. working width: 1500mm, max. workpiece thickness: 20mm, min. workpiece dimensions X/Y: 50mm/50mm, number of brushes: 4, brush heads: 2, machine dimensions X/Y/Z: approx. 2800mm/1500mm/1500mm, weight: approx. 1800kg, operating hours: 51h. Documentation available. On-site inspection is possible. Gsdpfxoudy S Ds Aacekc

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Gksdpfsk Egrtsx Aacjc * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Year of construction: 2007, condition: ready for operation (used), A deburring machine with extraction is available. Passage width: 1000mm, sheet thickness: 20mm, minimum sheet size X/Y: 150mm/100mm, sound power level: 82dB(A), feed rate: 4m/min, dimensions X/Y/Z: approx. 2200mm/1500mm/1500mm, weight: approx. 1600kg, operating hours: 7152h. Including P. Ries 330 D Lissmac extraction unit, year of construction: 2007, filter area: 10m², air volume: 3300m³/h, negative pressure: 33mbar. Documentation available. Gsdpfxstul N Do Aacokc

Year of construction: 2023, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel Gedpfx Aeuia Dqoacjkc - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling Gkodpfxer I E Exo Aacsc * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm Gkedpfx Ajk Uqhasacjc - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, diameter -- mm Gkedpfx Aasppgcrscoc workpiece length -- mm work piece width 0 - 3 mm speeds 3600 U/min range of angles 30 - 60 (stufenlos) ° weight of the machine ca. 31 kg dimensions of the machine ca. 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. * Scale for setting the processing depth * Security cover * Adjustable processing angle * For steel, stainless steel, aluminum and other materials * Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling Gkjdpfxsppgcyj Aacoc * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, working area L-W-H 1000 x 900 x 900 mm range L-W-H 1300 x 1750 x 2200 mm weight 350 kg Description: - Compact and elegant design - Easiest operation - low material consumption - optimal use of space - highly effective dedusting Gsdpfx Ajxaatzsacekc - efficient way of working - Environmentally friendly working without dust nuisance - controllable material consumption - Any conventional, dry abrasive is suitable as a blasting material * such as B. corundum, steel sand, glass grain, glass beads, ceramic beads

Condition: new, dimensions: innen 1160 x 870 x 850 mm Air consumption 400 - 800 l/min. air pressure 3,4 - 8,0 bar workpiece weight max. 150 kg total power requirement 1,2 kW weight 160 kg range L-W-H 1320 x 1200 x 1760 mm Furnishing: Gkjdpfjxabugjx Aacoc - Very large front flap that opens upwards - Suitable for various blasting materials * e.g. quartz, glass ball, plastic ball, etc. - Integrated suction system with exchangeable air filter - Jet gun without a finger trigger * The air flow is controlled by a foot pedal - Four fluorescent tubes (230 volts) * in a separate housing with protective screen and exchangeable protective film - Switch for suction and cabin lighting * Regulation of the working pressure via pressure regulator with manometer - Jet head (grain size 0.125 - 0.42 mm can be used) - Cross struts on the feet * easy transport with the pallet truck - Container for blasting material - dust extraction - foot switch - Operating instructions in German Scope of delivery : - High quality jet gun with ceramic nozzle - 4 ceramic nozzles (6/6/7/7 mm) - 5 replacement foils for viewing windows

Year of construction: 2018, condition: used, diameter 255 mm workpiece length 1300 mm work piece width 780 mm max. dia. of grinding wheel 255 mm work height max. 950 mm Gsdpfx Aaowwwt Aocskc engine output 0,8 kW weight of the machine ca. 445 kg dimensions of the machine ca. 1435 x 1100 x 1510 mm