Used Wolff Duro Stripper for sale (78)

Condition: good (used), Dirt traps, flanged dirt traps, filters, coarse or fine sieves, coarse filters, water filters -Manufacturer: AW Armaturen Wolff, Coarse filter, corner shape -Type: AW 603.0 PN 2.5 DN 300 GG25 603300 -Sieve plate, mesh size: Ø 2mm, material: stainless steel Kedpsipwb Sefx Aa Eofa -Dimensions: 700/50/H533 mm -Weight: 163 kg

Condition: used, tank capacity: 2,950 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: 4 feet made of V2A; total height stated is estimated Speed: 1475 rpm Outer diameter: 1,600 mm Inner diameter: 1,400 mm Total height: 3,500 mm Heating/cooling: available Insulation: available Power: 15 kW Max. permissible operating temperature: 151 °C Max. permissible operating overpressure: 5.0 bar Max. overpressure: 2.5 bar Agitator: Dissolver Support type: feet Location: Bremen Technical documentation: drawing, TÜV papers Cylinder temperature control: double jacket Nameplate: Vacuum: 0.9 bar Volume: 2,950 litres Double jacket volume: 148.0 litres Cylinder wall thickness: 10 mm Product-contact material: V4A 1.4571 (AISI316) Kjdoxqadzepfx Aa Eefa Condition: used Cylindrical height: 1,500 mm Last application: pharmaceutical TANK Max. permissible operating temperature: 138 °C HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulating jacket: hermetically welded Insulation material: mineral wool Insulating jacket material: stainless steel Insulation thickness: 70 mm EQUIPMENT Manhole / dome: in upper head (DN 500) Outlet: available MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR 1 Agitator manufacturer: PRG Voltage: 400 volts TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Agitator arrangement: offset in upper head Agitator equipment: additional 1 propeller on agitator shaft Top head wall thickness: 5.7 mm

Year of construction: 2006, condition: ready for operation (used), A screw press is available. Working capacity: approx. 64kNm, max. stroke: 250mm, nominal pressing force: 650t, max. pressing force: 750t, impact stroke: approx. 900t. Spindle diameter: 290mm, number of spindle starts: 3, max. stroke adjustment: 150mm, stroke rate: approx. 30min⁻¹. Frame opening: 730mm, max. installation height: 720mm. Ram area X/Y: 700mm/700mm, table area X/Y: 720mm/740mm. Machine dimensions X/Y/Z: approx. 4400mm/3150mm/2000mm, machine weight: approx. 30000kg. Upper and lower platen available. An inspection on site is possible. Kedjxxl Nfopfx Aa Ejfa

Condition: new, table length 1220 mm Kjdpoxqrhlofx Aa Eefa table width 760 mm table height 910 mm weight of the machine ca. 226 kg

Condition: new, Year of construction: 2025, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 Kedpovvx Hpefx Aa Esfa • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: ready for operation (used), Year of construction: 1994, A Wolff tower crane, which received a major control repair in 2023, is available. Hoist power: 28kW, jib length: 50m, hook height: 37.5m, tower system/setup: KRE250, support base: 5m, central ballast: 50t, counterjib length: 14m, counterweight: 15700kg, control system: complete CCplus V82. Documentation available. An on-site inspection is possible. Kfodpfx Aaox Aunlj Eja

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Kfedpfx Asxf Na Uoa Eja Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: new, Year of construction: 2025, table length 1000 mm table width 2000 mm table height 200 mm weight 650 kg Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm Kfsdpeuia Naofx Aa Esa • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine. Kedpfxexfb Iks Aa Ejfa

Condition: new, Year of construction: 2025, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height Kfjdpfx Asuia I Nsa Eoa of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, saw blade diameter: 400 mm, sheet thickness aluminum (max.): 4 mm, total length: 720 mm, total width: 760 mm, total height: 1,330 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 100 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 3,000 rpm, The Gerd Wolff AC 400 is an automatic aluminium cutting machine, manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned producer in Turkey. Standard Equipment - Fixing points for 15° - 22.5° - 30° - 45° - 67.5° - Locking handle for securing at intermediate angles Kfedsxb Ur Uspfx Aa Esa - Adjustable cutting speed for various profile types - Saw guard with safety switch - Belt-driven saw - Two-hand safety operation - Easily replaceable saw blade - 2 pneumatic vertical cylinders with clamps - 1 compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed regulation for aluminium profiles - Cooling system for cutting aluminium - Auxiliary conveyor with measuring rulers

Condition: new, plate depth 6000 mm plate width 1250 mm plate height 200 mm weight of the machine ca. 4520 kg required space 6000 x 1250 x 200 mm GERD WOLFF clamping plate 6000 x 1250 x 200mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slots - width: 42 x 22 mm T-slot spacing: 200 mm Number of slots: 6 Edge distance: 125 mm Casting quality HT250 Flatness less than 0.12 mm. Surface machined according to DIN 876/III Ksdpfx Aajw Nbl Se Esfa Keywords: Clamping plate, Machine table, Workpiece clamping, Fixing holes, Clamping system, Tool clamping surface, Clamping device, T-slot plate, Precision plate, Modular clamping plate, Hole system, Mounting plate, Workpiece fixation, CNC machine clamping plate, Machine base

Condition: new, saw blade diameter: 550 mm, sheet thickness aluminum (max.): 4 mm, total length: 1,130 mm, total width: 980 mm, total height: 1,430 mm, cutting range round steel at 90°: 155 mm, cutting range round steel at 45°: 130 mm, rotational speed (min.): 3,580 rpm, rotational speed (max.): 3,580 rpm, The Gerd Wolff AC 550 is an automatic aluminium cutting machine, manufactured in Turkey by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik". CUTTING CAPACITY: Cutting range 90° round: 155 mm Cutting range 90° square: 155 x 155 mm Cutting range 90° rectangular: 260 x 200 mm Cutting range 45° round: 130 mm Cutting range 45° square: 130 x 130 mm Cutting range 45° rectangular: 180 x 200 mm Standard equipment: - Indexing positions for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles Kfjdpsxb Urnofx Aa Esa - Adjustable cutting speed for various profile types - Saw cover with safety switch - Belt-driven saw - Two-hand safety operation - Easy-to-replace saw blade - 2x pneumatic vertical clamps with pistons - 1x air blow gun Optional equipment: - Hydrocheck – hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, Year of construction: 2025, cutting speed 35 m/s grinding height 210 mm workpiece length / mm weight of the machine ca. 210-260 kg required space 1100 x 760 x 860 mm The G115 Surface Grinder is a compact grinding machine designed for processing the circumference or face of the grinding wheel on the horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, inclined or shaped surfaces can also be processed. The machine is ideal for small businesses, maintenance industries, home workshops, laboratories, teaching demonstrations, and more. TECHNICAL DATA Maximum cutting amount: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal stroke of the worktable: 340 mm Transverse travel of the worktable: 170 mm T-slot of the worktable: 1-12 mm Outer diameter × inner diameter × thickness of the grinding wheel: 180×32×13 mm Grinding head motor: 550 W/220 V Vertical feed handwheel interval: 0.025 mm Lateral feed handwheel interval: 0.02 mm Net weight / Gross weight: 210/260 kg Machine dimensions: 930×780×730 mm Package size: 1100×760×860 mm FEATURES The worktable can be moved back and forth as well as left and right. The grinding head can be raised and lowered vertically. High rigidity of the entire machine. The grinding head runs smoothly. Compact design with low noise. The machine is lubricated by a manual oil pump. To lubricate, simply pull out the handle. Ksdpfovuuvkox Aa Eefa Work cabin is available separately. If you need any other special accessories to improve work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: From the proximal end of the main spindle to 100 mm, the radial runout of the tapered hole axis is 0.01~0.02 mm.

Condition: new, Year of construction: 2025, functionality: fully functional, grinding length: 340 mm, grinding width: 170 mm, total height: 730 mm, total length: 930 mm, total width: 780 mm, The G115 flat grinder is a compact grinding machine designed for processing the circumference or end face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or shaped grinding wheels, it is also possible to machine inclined or contoured surfaces. The machine is ideally suited for small businesses, maintenance operations, home workshops, laboratories, instructional demonstrations, and more. TECHNICAL DATA Maximum removal rate: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152×304 mm Maximum grinding height: 210 mm Longitudinal travel of worktable: 340 mm Cross travel of worktable: 170 mm T-slot of worktable: 1–12 mm Grinding wheel outer diameter × bore × width: 180×32×13 mm Kedpfxjxb Uq De Aa Eofa Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Lateral feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930×780×730 mm Packing dimensions: 1100×760×860 mm The worktable can be moved forwards and backwards as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the entire machine structure. The grinding head operates smoothly. Compact design and low noise emissions. A working enclosure is available separately. The machine is lubricated via a manual oil pump. To lubricate, simply pull out the handle. If you require special accessories to increase work efficiency, please contact customer service. Special accessories must be purchased separately. PRODUCT INFORMATION: From the proximal end of the main spindle, the radial run-out of the tapered bore axis is 0.01–0.02 mm at a distance of 100 mm.

Condition: new, Year of construction: 2025, turning diameter over bed 290 mm turning diameter / mm turning length / mm swing diameter over bed slide / mm Number of sanding units / st. sanding width / mm Sanding height max. / mm total power requirement / kW weight of the machine ca. 310 kg required space 1400 x 700 x 1030 mm The following features and characteristics make the G2930 combination lathe unique and competitive in the market: 1. V-shaped guides provide higher stability and are firmly anchored. 2. The gearbox is fixed for maximum stability and offers comprehensive feed and threading functions. 3. Advanced tapered roller bearings support the D1-4 spindle with high precision. 4. Automatic vertical feed enables maximum threading capabilities. 5. The cross slide is equipped with ‘T’-shaped slots. 6. The slideways are effectively controlled by adjustable gibs. 7. Advanced gearbox design with maximum functionality. 8. Maximum working area thanks to the lowered bed section. 9. The spindle with carriage mounting is controlled by a lever arm. 10. Two lead screws are integrated. 11. User-friendly interface for forward/reverse with zero tolerance. 12. Versatile tailstock that can be offset for turning tapers. 13. Equipped with an emergency stop button, load switch, process control, etc. TECHNICAL SPECIFICATIONS - Max. swing over bed: 290 mm - Max. swing over cross slide: 165 mm - Distance between centers: 750 mm - Spindle taper: MT5 - Spindle bore: 38 mm - Max. travel of tailstock: 80 mm - Tailstock taper: MT3 - Large carriage travel: 560 mm - Middle carriage travel: 140 mm - Small carriage travel: 80 mm - Transverse feed: 0.017~0.25 mm/r, 15 steps - Longitudinal feed: 0.07-1.0 mm/r, 15 steps - Metric thread: 0.2-3.5 mm, 18 steps Kfsdpfx Ajxb Eidja Eoa - Inch thread: 8-56 T.P.I, 21 steps - Spindle speed range/steps: 50~1800 RPM, infinitely variable - Motor power: 1.5 kW Other dimensions and weight: - Overall dimensions: 1400 x 700 x 1030 mm - Package size: 1450 x 750 x 970 mm - Net weight: 290 kg - Gross weight: 310 kg

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter: 290 mm, turning length: 750 mm, total length: 1,400 mm, total width: 700 mm, total height: 1,030 mm, rotational speed (max.): 1,800 rpm, spindle mount: MK 3, The following features and characteristics make the G2930 combination lathe unique and competitive in the market: 1. V-shaped guideways provide superior stability and are securely anchored. 2. The gearbox is fixed for maximum stability and offers comprehensive feed and thread cutting functions. 3. State-of-the-art tapered roller bearings support the D1-4 spindle with the highest precision. 4. Automatic vertical feed enables maximum threading capabilities. 5. The cross-slide is equipped with T-slots. 6. Guideways are effectively controlled by adjustable gibs. 7. Advanced gearbox design with maximum functionality. 8. Maximum working area due to the lowered bed section. 9. Carriage-mounted spindle is operated by a lever arm. 10. Two feed screws are integrated. 11. User-friendly forward/reverse interface with zero backlash. Kjdpexb Up Tjfx Aa Eefa 12. Versatile tailstock that can be offset for taper turning. 13. Emergency stop button, load switch, process control, etc., are installed. TECHNICAL DATA Max. turning diameter over bed: 290 mm Max. turning diameter over cross slide: 165 mm Distance between centers: 750 mm Spindle taper: MT5 Spindle bore: 38 mm Max. tailstock travel: 80 mm Tailstock taper: MT3 Longitudinal carriage travel: 560 mm Cross-slide travel: 140 mm Compound slide travel: 80 mm Cross feed: 0.017~0.25 mm/rev, 15 steps Longitudinal feed: 0.07-1.0 mm/rev, 15 steps Metric thread: 0.2-3.5 mm, 18 steps Imperial thread: 8-56 TPI, 21 steps Spindle speed range/steps: 50~1800 RPM, stepless Motor power: 1.5 kW Further dimensions and weight: Overall dimensions: 1400 x 700 x 1030 mm Packing size: 1450 x 750 x 970 mm Net weight: 290 kg Gross weight: 310 kg

Condition: new, Year of construction: 2025, number 40-teilig weight 47 kg condition Neu FIX KIT 40 - The Comprehensive Solution Set for Welding Tables Stock Number: FIX40 Weight: 47 KG Shipping: Pallet Shipping (not included in the price)# CONTENTS 2x Clamping and Squaring Angle 175 x 50 x 175 mm 2x Clamping and Squaring Angle 275 x 50 x 175 mm 4x Stop 100 x 50 x 25 mm 4x Sliding Stop 150 x 50 x 25 mm 4x Large Universal Stop 225 x 50 x 25 mm Kedpjw T Uzhofx Aa Ejfa 2x Clamping and Squaring Angle 75 x 50 x 75 mm 2x Prism D58 x 90° 58 x 50 (H) - 90° 4x 180° Clamp 300 x 300 mm 2x 45° Clamp 300 x 300 mm 1x Round Brush 1x Grounding Device 12x Quick-Release Bolt 28 x 75 mm Clamping range between 70-75 mm. Also available individually and in a 50 mm version. Specifically designed for welding tables, the FIX KIT 40 emerges as a comprehensive 40-piece fixture kit. With a precise bore diameter of 28 mm, it ensures seamless integration and adaptability. Not only is this set robust and durable, but it's also perfectly tailored to the requirements of welding tables. The FIX KIT 40 offers a tailored solution for customizing your tool equipment. The included modules are carefully selected to create clamps and fixtures with the utmost precision and efficiency. This allows you to optimize your workspace according to your specific needs. In a world where adaptability and precision are paramount, the FIX KIT 40 sets new standards. It's not just a kit; it's a key tool that aids you in making your work processes more effective and efficient.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,595 kg, total height: 800 mm, total length: 1,500 mm, total width: 1,500 mm, plate height: 800 mm, plate width: 1,500 mm, groove spacing: 140 mm, Clamping cube - T-slot plates 1500 x 1500 x 800 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this form we can produce an individual plate for you. Parameters can be combined as desired. Clamping plate : 1500 x 1500 x 800 mm T-slots - width: 38mm x 22mm T-slot spacing: 140mm Kjdoxbpnqjpfx Aa Eofa Edge distance: 40mm Number of grooves: 14 Casting quality: HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III

Condition: new, plate depth 2000 mm plate width 1000 mm plate height 600 mm weight 1800 kg GERD WOLFF clamping cube 2000 x 1000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 Ksdew T Uzbepfx Aa Eefa T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 1800 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: new, Year of construction: 2025, overall weight: 4,200 kg, total height: 600 mm, total length: 3,000 mm, total width: 1,000 mm, Clamping cube - T-slot plates 3000 x 1000 x 600 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this form we can produce an individual plate for you. Parameters can be combined as desired. Kfodpfx Aaotrlaho Eea T-slots - width: T-slot spacing: Edge distance: Number of grooves: 10 Casting quality: HT250 Flatness less than 0,12 mm Surface machined according to DIN 876/III

Condition: new, Year of construction: 2025, diameter 28 mm length 50 mm clamping range 45-50 mm The price is exclusive of statutory VAT. Also available in D28 x 75 mm (clamping range 70–75 mm). Clamping range: 45–50 mm Type: Ball Lock Pin 50 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hardness: HRC28–32 Surface roughness: Ra 0.8 µm GERD WOLFF ball lock pins are specialized fastening components designed for integration into a wide range of welding table systems and setups. Their main function is the efficient and precise positioning and securing of workpieces. These pins are compatible with welding tables from all manufacturers that feature 28 mm bore holes. The unique ball-lock design enables flexible alignment of workpieces at various angles and positions. Thanks to their high-quality manufacturing and robust construction, GERD WOLFF ball lock pins provide reliable holding force throughout the entire welding process. These pins allow for easy handling, fast clamping, and release of workpieces — without the need for additional tools. GERD WOLFF stands for quality and precision in welding technology. These ball lock pins are engineered to meet the high demands of professional welding applications. Kfedjw Td Auspfx Aa Eea Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins.

Condition: new, Year of construction: 2025, overall weight: 1,800 kg, total height: 600 mm, total length: 2,000 mm, total width: 1,000 mm, plate height: 600 mm, groove spacing: 140 mm, GERD WOLFF Clamping cube 2000 x 1000 x 600 mm If you cannot find the size you require, simply send us an email with the completed PDF form. This will enable us to offer you a customised plate tailored to your requirements. T-slots – size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 1800 kg Cast iron quality HT250 Flatness less than 0.12 mm Kedpsxbpihefx Aa Esfa Surface machined according to DIN 876/III Clamping cube, cubic clamping table, multi-sided clamping, angle clamping cube, precision cube, CNC clamping cube, clamping angle, machine cube, 90-degree clamping device, drill hole cube, modular clamping cubes, workpiece positioning, assembly cube, fixing cube, clamping block

Condition: new, angle steel/side length / mm double T-iron on the x-axis / mm U-iron on the x-axis / mm total power requirement / kW weight of the machine ca. 1000 kg required space 1200 850 x 1200 mm The Gerd Wolff HPK-80 is a hydraulic profile and tube bending machine with 3 rollers. The machine is ideal for bending profiles, tubes and similar material. Model: HPK 65 Upper shaft diameter: Ø 60 mm Bottom shaft diameter: Ø 50 mm Roll diameter: Ø 180 mm Working speed: 6 m/min Motor power: 3.75 kW / 380 V Dimensions (L x W x H): 1200 x 850 x 1200 mm Weight: 1000 kg Standard Accessories: Steel construction welded frame 3 rolls are powered Hardened and ground shafts made of high tensile special steel Horizontal and vertical working position Hardened standard rolls Mobile control panel 3-axis mechanical lateral angle guide rolls Kodow Nbmpepfx Aa Esfa Brake motor equipped for precision bending Digital read-outs (2 pcs) Optional Equipment: NC control Hydraulic lateral guide rollers (2-axis) Spiral bending crane Special profile rolls

Condition: new, plate width 1500 mm plate depth 1500 mm plate height 800 mm weight 2595 kg GERD WOLFF clamping cube 1500 x 1500 x 800 mm Also available in 600 mm version (H1153). The images above depict the clamping cubes with dimensions of 1500 x 1500 x 600 mm. Shortly, we will provide images of the 800 mm high variant, which features an additional fourth slot on the side. If you cannot find your desired size, simply send us an email with the Kfedpfow Nbmiox Aa Eea completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 14 Edge distance: 120 Weight: 2595 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block