Ref. -No.: 10111
Brand: GRATOMAT
Storage location: Mülheim an der Ruhr
Country of origin: Deutschland
Gogmn0qwq
Further information:
Tooth and chain wheel deburring machine Gratomat Type 50 W
max. wheel diameter 2800 mm
gear width 1000 mm
max. module 18
min. module 2
max. workpiece weight 4000 kg
workpiece turning speeds 1,11 - 6,66 U/min
Gear dia. External: min. 1200 mm, max 2800 mm
2ssdx3
Gear dia. Internal: min. 1000 mm
Complete datasheet of the machine upon request.
diameter 90 mm
workpiece length beliebig mm
work piece width beliebig mm
Bürstendurchmesser 250 mm
Bürstenbreite 60 mm
voltage 380 V
frequency 50 Hz
power capacity 3 kW
weight of the machine ca. 0,1 t
dimensions of the machine ca. 1,0 x 0,6 x 1,2 m
This machine is well suited for burring of fore-parts
and side walls,
M8zbld
mounted on machine cupboard,
with accessory parts for short work pieces and plate edges,
diameter of brush 250 mm
Clsjxkoc
width of brush 80 mm
turning speed range 1500 / 3000 U/min
voltage 380 Volt
total power requirement 3,0 kW
weight of the machine ca. 150 kg
dimensions of the machine ca. 700 x 600 x 1150 mm
Furnishing:
- electr. Brush deburring machine
- Support bracket for material
- 2x speeds
- Machine base
diameter 1500 mm
workpiece length 0,8 - 100 mm
work piece width 1000 mm
N3hjn
max. wheel diameter 2000 mm
gear width 0 mm
max. module 0
dimensions of the machine ca. 2x1,2x1,5 m
uncomplete machine body with drive motor. drive unit fully functional. Without
grinding unit.
Byjl7s8m
Deburring machine
Fab. Weber Typ. TT-1P (6) - 600
very good condition, year 2010
Gfyj3ex
Technical data
Make: Weber
type TT-1P (6) - 600
Year of manufacture 2010
passage width 600 mm
Engine power 11KW
working width 1100 mm
Working height 900 mm
Stepless feed speed 1 - 10 m / min
Sanding belt length 1900 mm
Weight approx. 2000 kg
Equipment
- suction system
- Planetary head for all-round edge processing
- grinding roller
All data without guarantee.
The machine is in a very good condition. A demons...
Brush deburring machine, sheet metal deburring machine, deburring machine,
Nmtk9
-Deburring machine for: punching, laser and nibbling parts
-Deburring system for: sheet metal edges with notches
-Drive power: 0.71 kW
Speed: 4500 rpm
-Dimensions: 400/180/H130 mm
-Weight: 3.5 kg
max. wheel diameter 150 mm
gear width 50 mm
max. module 4
min. module 1
tailstock travel 25/70 mm
max. tool diameter 175 mm
8ukgubse8
turning speed range - stepless 50-250 U/min
total power requirement 8 kW
weight of the machine ca. 2,5 t
dimensions of the machine ca. 3,2x2,2x2,9 m
diameter 120 mm
Bonb2dxo32
work piece width 120 mm
turning speeds 1.500/3.000 U/min
diameter - max. grinding bore 10 - 120 Vierkant mm
total power requirement 3,5 / 4,6 kW
Simultaneous deburring of the inside and outside edges.
High-performance brushes ensure reproducible
Results. Workpieces with light contact pressure
Hold the RASAMAT brush head. No manual turning of the workpiece
Furnishing:
- Deburring machine with universal front panel
- for deburring steel, stainless steel, aluminum and...
max. wheel diameter:30-150 mm
max. module:6
total power requirement:36 kW
weight of the machine ca.:11 t
dimensions of the machine ca.:2,4 x 2,5 x 3,4 m
max. number of teeth:100
min. number of teeth:7
tool taper:HSK C50
milling head speed:0-6000 U/min
no. of strokes:300 Hub/min
milling spindle motor:6,3 kW
D0ttkzgn
voltage:400 V
working width 900 mm
workpiece height 1 - 70 mm
total power requirement 25 kW
workpiece length - min. 400 mm
grinding band dimension 1540 x 900 mm
feed 1 - 4,5 m/min
compressed air 5 bar
work height max. 880 mm
Required air-pressure R 3/8''
weight of the machine ca. 2,8 t
dimensions of the machine ca. 2,6 x 2 x 1,8 m
workpiece weight max 300 kg
Bjbd27nexj
Metal Deburring Maschine ERNST EG 3 MII incl.:
Dust extractor and suction for the deburring form steel plates
in the steel construction an...
part thickness: 1 - 70 mm
min. part length: 350 mm
min. part length with vacuum: 80 mm
working height: 1000 mm
Feeding speed: 2-4 m / min
Yf0e92e
Weight of machine approx.: 3200 kg
Electrical connected load: 25 kW
diameter:250 mm
work piece width:100 mm
Uv8ja7r28
speeds:1500 / 3000 U/min
work piece diameter:30 mm
number of deburring places:2 Stahl / Edelstahl
total power requirement:2,6 / 3,3 kW
weight of the machine ca.:180 kg
1 brandnew REHNEN RE 500 brush deburring machine with following equipment:
-2x TAIFUN brush D250 x 48 for steel
- TAIFUN brush D250 x 48 for stainless steel
- stepless height adjustment of workpiece support
- stepless adjustment of support area to abrasive
- also in 1000/1500 rpm ...
Details about the machine:
Control: Siemens Sinumerik 840D
Milling spindle speed, 1 and 2: 0 - 6,000 min-1
Milling spindle drive torque: 6.6 Nm
Stroke rate: max. 180
Max. workpiece clamping force: 1500 daN
Centre height of workpiece spindle: 1100 mm
Workpiece spindle, max. travel: 800 mm
Workpiece spindle, max. working stroke: 18 mm
Tilt angle milling spindle: 35
Tilting angle spindle stand max.: 60
Smallest infeed value: 0.01 mm
Tool holder: SK30
Workpiece
Bt2n9a3auu
Workpiece diameter max.:...
diameter of brush 250 mm
width of brush 80 mm
Bl9jxqwyue
turning speed range 1500 / 3000 U/min
voltage 380 Volt
total power requirement 3,0 kW
weight of the machine ca. 150 kg
dimensions of the machine ca. 700 x 600 x 1150 mm
Furnishing:
- electr. Brush deburring machine
- Support bracket for material
- 2x speeds
- Machine base - mobile
max. wheel diameter:30-150 mm
max. module:6
total power requirement:36 kW
weight of the machine ca.:11 t
dimensions of the machine ca.:2,4 x 2,5 x 3,4 m
max. number of teeth:100
min. number of teeth:7
tool taper:HSK C50
milling head speed:0-6000 U/min
no. of strokes:300 Hub/min
Behju88jhc
milling spindle motor:6,3 kW
voltage:400 V
Kunz sheet metal deburring machine K2
sheet thickness max.: 8mm
incl. 11 brushes
brush diameter: 300 mm
motor power: 2 x 2 kVA
dimensions L x W x H: 1200mm x 1500mm x 1350mm
The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test certificate.
The MMV Group offers you especially for our products the suitable financing.
Hymgqyz
Calculate now with MMVfinrate easily online your monthly rate.
On request you will receive your personal financing offer and comp...
Brush deburring machine, pipe end deburring machine, deburring machine, pipe deburrer
Fw0kt2n
-Roterberg: 2-station pipe deburring machine inside/outside
-equipped: for diameters up to 50 mm
-Drive: 0.74 kW 380 V
-Speed: 100 - 800 rpm
-Dimensions: 660/630/H1160 mm
-Weight: 126 kg
max. working width: 1500 mm
Bq78qhnw
workable material thickness: 20 mm
Tension: 400V / 50 Hz
Total power: 32 A
Total current consumption: 4x3 kW
Insulation class: IP54
Infinitely variable feed speed: 0-4 m / min
Length: 2730 mm
Width: 1500 mm
Height: 1532 mm
Machine weight: 1790 kg
Standard configuration
Extended machine accessories
grinding length: mm
grinding width: mm
workpiece height: mm
material diameter from - to:: Ø 60 - 110 mm
material length: 200 - 1500 mm
table adjustment: max. 1500 mm
table adjustment: min. 200 mm
total power requirement: 2x2,2 kW
weight of the machine ca.: 2,8 t
dimension machine xH: 3,5 x 2,4 x 1,82 m
BRUSH MACHINE
for deburring / brushing of pipe ends / welded profile tube / pipe bodies on the front side
Characteristics:
- Pin/brush holder Ø 26mm
- 3 pieces brushes
- 2 supports (1x fixed and ...
diameter of brush 250 mm
width of brush 80 mm
turning speed range 1500 / 3000 U/min
voltage 380 Volt
total power requirement 3,0 kW
weight of the machine ca. 150 kg
dimensions of the machine ca. 700 x 600 x 1150 mm
Furnishing:
- electr. Brush deburring machine
- with suction
- 2x speeds
Suomkg
- Machine base
OFFER 21168
Technical data:
- Brush diameter approx. 250 mm
- brush width up to approx. 60 mm
- disc speed 1500 rpm
- drive 400 V / 2,2 kW
- space requirement approx. W 400 x H 400 x D 400 mm
- Weight approx. 32 kg
Govphlkze
max. pitch circle 760 mm
stroke 110 mm
bis 150
3-jaw-chuck diameter 160 mm
total power requirement 21 kW
weight of the machine ca. 2,5 t
dimensions of the machine ca. 3,7 x 3,2 x 3,7 m
Multi-spindle deburring machine with rotary table 2 x 180 °; pitch 760mm; 2
pneumatic chucks ROTA S 3-jaw Ø160mm
Loading and unloading station for the workpiece change manually or
automatically by loading portal.
Station 1:
1 piece special brushing processing unit, mounted on vertical structure
hydro. pn...
Deburring machine, hole deburrer, bore deburrer, deburring device
2pmafm
-Drive: 0.30 kW
-Countersink
-Speed: 585 rpm
-Dimensions: 500/300/H460 mm
-Weight: 31 kg
Working hours machine: 57 h
Bkqvxjwgjz
max. working width: 950 mm
workable material thickness: 120 mm
Tension: 400 V (50 Hz) / 480 V (60 Hz)
Total power: 63 A
Total current consumption: 32,5 kW kW
Insulation class: IP 42
Infinitely variable feed speed: 0,5 - 8 m / min
Length: 1595 mm
Width: 2665 mm
Height: 1906 mm
Weight of machine approx.: 2900 kg
Standard configuration
Removing slag,deburring and edge rounding in one throughfeed pass, saves time The high quality and solid construction of t...
diameter: mm
workpiece length: 130 - 2000 mm
work piece width: mm
diameter min.: Ø 10 mm
diameter max.: Ø 60 mm
control: Fagor 10/102 S
dimension machine xH: 3,8 x 3,8 x 1,9 m
dimensions electric cabinet LxWxH: 1,2 x 0,6 x 2,2 m
machine weight ab.: 4 500 kg
Milling and deburring machine CNC of pipe ends or round steel on both sides.
- Material feed via conveyor belt, travel distance approx. 3 300 mm.
- Brush unit type PGAS 8/100 V-HV both sides/opposite, speed 10 000 rpm. (drive via compressed a...
max. wheel diameter 400 mm
max. number of teeth 150
max. module 5
total power requirement 16 kW
weight of the machine ca. 10 t
Workpiece Ø, min./max.30 - 400mm
Number of teeth6 - 150
Module range, max.5
Tool holder shaft ØSK 30 / 20
Tool speeds4,000rpm
Spindle drive max. infinitely variable1.8kW
Feeds, longitudinal and cross0.001 - 12m/min
Workpiece speed, max. (1.5 kW) C Axis2,000rpm
Workspindle slide400mm
Tool speed, max.3,000rpm
Tool holderSK 30
Total electrical load, approx.16 kW - 38...
diameter -- mm
Bjbte9gu8s
workpiece length -- mm
work piece width 1500 mm
hollow 1500 mm
plate thickness 0,5 - 50 mm
weight max. 300 kg/lfm
feed stepless 0 - 4 m/min
weight of the machine ca. 2,8 t
dimensions of the machine ca. 3,3 x 1,5 x 1,8 m
Automatic sheet metal deburring machine
Manufacturer: ERNST
Model type: EM6N1400
Year of manufacture: 2008
roller width: 1400 mm
Roller diameter: 420 mm
roll shaft diameter: 250 mm
workpiece: 1 - 70 mm
working height: approx. 1000 mm
frequency: 50 Hz
feed rate: 2 - 4 m/min
Oscillation of the grinding roller: 50 strokes/min
Vacuum suction system width: 300 mm
Magnetic belt width: 200 mm
Bt8c3woh7t
The machine has a vacuum suction system as well as a magnetic belt.
One highly elastic sanding rolle...
total power requirement 21 kW
dimensions of the machine ca. 3,0x3,0x2,8 m
Cmzkiunv
diameter 400 mm
workpiece length 400 mm
work piece width 400 mm
weight of the machine ca. 2,5 t
current intensivity 300 A
connected load frequency 400 VAC
Required air-pressure 6 bar
work stroke 400 mm
daylight - vertical 655 mm
We quote a ECM-deburring machine of type VMB ECM 400-30 E with 1 station and
all neccessary attachment. We deliver: ECM-machine from 1999 in running
condition with
- machine number 356...
Working hours machine: 29 h
max. working width: 950 mm
workable material thickness: 3-100 mm
Tension: 400 V (50 Hz) / 480 V (60 Hz)
Total power: 63 A
Total current consumption: 32,5 kW
Insulation class: IP 42
Infinitely variable feed speed: 0,5 - 8 m / min
Length: 1595 mm
Width: 2665 mm
Height: 1906 mm
Weight of machine approx.: 2900 kg
Bkqvygjxf3
Standard configuration
Extended machine accessories
max. wheel diameter:300 mm
gear width:100 mm
max. module:5
workpiece turning speeds:0 - 1000 1/min
work piece - max.:1100 mm
workpiece clamping:auto. tension device
number of spindle speeds:1000 1/min.
Ps99ey
spindle bearing diameter:100 mm
diameter of spindle flange:120 mm
tailstock travel:80 mm
weight of the machine ca.:3500 KG
dimensions:1200 x 1450 x 2250 mm
total power requirement:10 kVA
The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with...
diameter 0 mm
workpiece length 1000 mm
work piece width 875 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Wp2yljvp
CNC deburring/brushing cell, tool magazine, SIEMENS 510, 5 axes
CNC Controlled Flexible Brushing and Deburring Cell
At the moment we have onepre-owned F200 machine left on stock. Built year 2015.
The F200 is a 2-station deburring and grinding machine. Suitable for finishing (very) small parts, equipped with vacuum support: for the fixation of non-ferrous and ferrous sheet metal products like stainless steel, aluminium and steel. For deburring, grinding and/or edge rounding of workpieces as small as 15 x 15 up to 200 mm wide.
The F200 is a unique deburring machine that is especially designed for finishing ...
.
see enclosed brochure excerpt
.
Btqt23mqdk
Switch-on hours : 1780
.
11
Edge deburring device
Manufacturer: MAKRA
Type: KEG 400
Mko8em9t
spindle speed infinitely variable: 3.500 - 30.000 1/min
guide rails B = 50/70 mm, L = 400 mm, 90° arrangement
Scope of delivery:
max. wheel diameter 800 mm
Benx0tmnc3
gear width 400 mm
max. module 0,5
min. module 20
total power requirement 21 kW
weight of the machine ca. 2,5 t
dimensions of the machine ca. m
Multi-spindle deburring machine with rotary table 2 x 180 °; pitch 760mm; 2
pneumatic chucks ROTA S 3-jaw Ø160mm
Loading and unloading station for the workpiece change manually or
automatically by loading portal.
Station 1:
1 piece special brushing processing unit, mounted on vertical structure
hydro. pneumat...
max. wheel diameter:400 mm
max. module:6
Nkxtd
total power requirement:36 kW
weight of the machine ca.:9 t
dimensions of the machine ca.:2,4 x 2,4 x 3,5 m
max. number of teeth:100
min. number of teeth:7
tool taper:SK30
milling head speed:0-6000 U/min
milling spindle drive:6,6 Nm
no. of strokes:180 Hub/min
working width 1380 mm
workpiece height 70 mm
Ewaufg9
total power requirement 45 kW
weight of the machine ca. 5.500 kg
dimensions of the machine ca. m
Deburring machine for round pipes ROTERBERG type Duplex 8-85
No. 12120086 Year of manufacture 2013
Tool holder MK 3
Deburring range 8 to 85 mm
Fsfb2srjs
Spindle speeds 60 to 300 rpm infinitely variable
Engine power 0,75 bar
Power supply 400 Volt, 50 Hz
- Spindle speed infinitely variable via variator gearbox
- 2 work spindles each with MK3
- slid on guide and protection tubes above the work spindles
- 1 piece chamfer milling cutter (countersink) Ø 50 mm for internal deburring of pipes
- 1 pc. ch...
Deburring of extruded profiles of any geometry.
Already surface finished profiles can be processed without damaging the outer surface.
A special brush tool with positively guided wire segments is moved via a planetary gear. The resulting three directions of rotation give a full-surface radius of action.
Workpiece clamping and cross feed pneumatic.
Material cross sections 10x10 up to max H 180 x W 450 mm.
Materials: aluminium, copper, brass, steel, stainless steel.
Cycle time: 4 - 12 sec. per fac...
KE 16-2 - Kantenentgrater for visible edges and welding edge preparation with continuous angle adjustment of 15? 60 °
Wsakmbsv
KE 16-2 with mounted handle
Kantenentgrater for visible edges and welding edge preparation with continuous angle adjustment of 15? 60 °
Due to adjustable guide rollers on the plate for the deburring of tubes
Hervorrangend for the production of sauberenSichtkanten and the weld preparation
Handy and powerful device setting the bevel height without tools
For machining mild...
2
One more day
maximum 60mm
Bkbohd8c
max. wheel diameter:300 mm
gear width:100 mm
Yr89q0
max. module:5
workpiece turning speeds:0 - 1000 1/min
work piece - max.:1100 mm
workpiece clamping:auto. tension device
number of spindle speeds:1000 1/min.
spindle bearing diameter:100 mm
diameter of spindle flange:120 mm
tailstock travel:80 mm
weight of the machine ca.:3500 KG
dimensions:1200 x 1450 x 2250 mm
total power requirement:10 kVA
The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with...
diameter 180 mm
Bd8ckbw8ic
workpiece length 0 mm
work piece width 1350 mm
total power requirement 65 kW
weight of the machine ca. 7.500 kg
dimensions of the machine ca. m
Very good technical condition - removes oxide, dirt and rust on all outer and inner sides of the workpiece.
Type: SBM-M 1500 B2
Manufacturer: LISSMAC
Year of production: 2012
Engine power: 4 x 4.8 kW
Max. working width: 1500 mm
Nlhgf
Max. Material thickness: 20 mm
Min. material thickness: 1 mm
Machine size: 2600 x 1400 x 1800 mm
Weight 2230 kg.
messurements (LxWxH): 1300 x 800connection performance: 1,5
Bdf8cinz32
