Deburring Machine

Reis RV30-26-RSVI

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Prsdethuzpepfx Akioc Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Year of construction: 2017, functionality: fully functional, center height: 180 mm, total width: 1,650 mm, total length: 4,900 mm, total height: 1,800 mm, overall weight: 3,900 kg, grinding length 1500 mm centre height 180 mm weight of the machine ca. 3,9 t dimensions of the machine ca. L: 4900 x 1650x 1800 m Predpfx Aowm Rqgokiec

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length Prodpfxjv A Uw Dj Akisc 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: used, Year of construction: 2018, 3D printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Prjdpfxovtftqo Akioc Machine Opening: 450 x 180 mm

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Dear Mr./Mrs, we have opportunity to offer you PLATEG plasma (ion) nitriding equipment. Chamber is with hot wall. Equipment is in excellent condition, fully functional, without any problems, ready for use. Equipment characteristic: - Dimensions of construction: 2700 mm x 1250 mm x 800 mm - Dimensions of chamber: Diameter 1000 mm x 1200 mm - Maximum dimension of nitriding batch: Dimeter 900 mm x 900 mm - Total equipment power: 70 kVA - Power of heaters: 30 kW - Power of plasma supply (BIAS): 30 kW - Plasma supply is unipolar, voltage 0-1000V, current 0-60A, DC to 33 kHz, pulse on and pulse off adjustable - Plasma supply (BIAS) is only one year old, bought from Germany (El Connect company) - Vacuum pump: Pffeifer vacuum 65 - Vacuum system is controlled by new electrical cabinet with PLC and HMI - 4 MFC for dosing gasses Prsdpevfm I Hofx Akiec - Plasma nitriding process, post oxidation process Company Planit is also giving assembly services of this equipment, maintenance manual, user manual, technology (nitriding and oxidation) and also service. For any question, don't hesitate to ask. Best regards.

Condition: used, Year of construction: 2002, Suitable for automatic grinding of all types of tools. Accessories: Total enclosure Knoll E53319 bandfilter system Numroto 3D Simulation Software, Numroto 3D Collision Detection Software, Numroto Form Cutter Software, Pallet loader CNC handwheel Control cabinet cooler, automatic tailstock automatic central lubrication Glass scales on the X, Y, Z linear axes Measuring probe Hydraulic workpiece clamping Oil collection tray 2 loading pallets, 1 grinding wheel holder. Prodpfoyv Hv Rsx Akisc X axis travel: 800 mm Y axis travel: 270 mm Z-axis travel: 660 mm B axis travel: 400 ° Rapid traverse: 30/15/30 m/min Workpiece mount: ISO 50 Tool holder cone: ISO 50 Grinding spindle drive power: 12 kW Grinding spindle speed stepless: max. 9000 rpm, Grinding wheel diameter: max 203mm Connected load approx.: (400V/50Hz) Dimensions L x W x H: 1900 x 2300 x 2300 mm Weight approx: 5400 kg Colour: Grey / yellow

Condition: ready for operation (used), Hello, we offer used Erowa Powerchuck with pallets. They have been cleaned and checked by us. Prodpfoiq Iy Iox Akijc In addition, a functional test was carried out. The chucks have the usual signs of wear, but are technically in good condition. Individual purchase also possible. Wide range of pallets available. Do you have any questions? Then we are at your disposal. Shipping is possible.

Year of construction: 2008, condition: excellent (used), machine/vehicle number: 149720, Technical specifications Manufacturer: ZEISS Type: Pro T-Premium Year of manufacture: 2008 Single-column CMM Serial number: 149720 Measuring range X = 3000 mm Y = 1800 mm Z = 2100 mm Psdpfxsf S A Ais Akijrc Equipment Tactile probes C99 control system CMMOS software, Caligo Holos 3.0, DMIS The machine can be upgraded with new accessories according to customer requirements. Price: upon request! Installation and commissioning possible! We will gladly prepare a detailed offer for you. Note: Our offer is exclusively for professional customers. (Changes and errors in the technical data, specifications, and prices, as well as prior sale, are reserved!)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, CNC travelling column milling machine | Manufacturer: ANAYAK | Type: HVM-6000-P | Year of construction: 2007 The machine can be inspected under power by appointment. Prjdpfsyry Rfjx Akijc Condition: Fully functional / ready for operation. Operating hours (as of 02.03.2026): - Control system on: 129.206 h - Machine on: 88.579 h - Programme run: 31.645 h - Spindle running time: 26.813 h TECHNICAL DATA Travel distances: - X-axis (longitudinal): 5.300 mm - Y-axis (transverse): 1.500 mm - Z-axis (vertical): 2.500 mm Table: - Table surface: 6.000 x 1.200 mm - Max. table load: 15.000 kg/m² Spindle taper: - Tool holder: ISO 50 Milling head – multi-angle, 45° (degrees): - Angle positioning: Automatic axes B and A - Speed with continuous change: 60 – 4.000 rpm Feeds: - Working feed: 10.000 mm/min - Rapid feed: 20.000 mm/min EQUIPMENT: - 2 x CNC control: HEIDENHAIN iTNC 530 - Tool changer, chain magazine 100 positions - 2 x Electronic Hand Wheel - 2 x Chip conveyors - External and internal coolant supply through the spindle - CE marking - Documentation No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale – Detailed technical data sheet and information on equipment available on request.

Year of construction: 2019, operating hours: 5,500 h, condition: excellent (used), functionality: fully functional, The equipment must be removed by May 26, 2023 – a bid obligates the bidder to dismantle and remove the equipment within the specified timeframe. TECHNICAL DETAILS: Maximum workpiece size: 1050 x 820 x 300 mm Maximum workpiece weight: 1,000 kg Travel distances: 600 x 400 mm Pedpfx Akek H D Haeisrc Wire diameter: 0.1 – 0.3 mm Machine weight: 3,000 kg Control system: Fanuc 31i –WB Footprint: 2,440 x 2,680 mm Machine hours: 5,500 operating hours