Used Chamfering Machine for sale (83,797)

Condition: excellent (used), HSS saws chamfering machine EYAN Bdjdpfx Abohzcd Uebjk

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 43100, total height: 9,650 mm, Mechanical engineering from Innovative and reliable Machines for weld seam preparation and sheet metal processing Quicker high-speed beveling machine using the roller shear method for beveling technology. These QUICKER machines work according to the roller shear method. In this process, a long chip is from the sheet edge by means of a slowly rotating cutting wheel. This enables This achieves speeds of up to 3.1 m/min (up to 5 times faster than conventional methods). The efficiency is also increased by the low wear of the tool cone. This process is one of the most efficient ways of preparing weld seams. The cost savings of up to 75 % compared to conventional methods. Fast, compact, handy and with infinitely variable angle adjustment from 15° to 55°, this machine is one of the most popular chamfering machines. one of the most popular chamfering machines. The practical scissor lift truck can be adjusted over a wide range for adjustable over a wide range. This allows the machine to easily move past the fixed sheet metal panel. move past the fixed sheet. Of course, the Quicker II can also be operated with a crane. This machine is rotated by 180° for processing bottom chamfers. The holes on the on the upper side match those in the machine feet. Many customers have ordered two of these machines ordered two of this machine. One for the top bevel and one for the bottom bevel. Spare parts can be obtained quickly and tools, such as cutting wheels for steel and stainless steel, are available from stock. ROLLER SHEARING MACHINE GECAM QUICKER Bedpjqvm Urjfx Abbodk GECAM QUICKER - BEVELING MACHINE, STRONG AND HANDY, INFINITELY VARIABLE ANGLE ADJUSTMENT - Precise adjustment of the bevel angle and the bevel dimension - Stepless angle adjustment 15°-50 - Tools available for all materials - Clear view of the cutting process - For the upper bevel and convertible for the bottom bevel - Stable sheet metal guide for safe chamfering - Chamfering of sheets and tubes - 5 x faster than conventional processes - Highly economical - Low tool wear - Low maintenance - Optional: Lifting carriage for QUICKER with infinitely variable height adjustment (working height approx. 860 mm - 1,200 mm) Europe Technical data: Quicker Bevel capacity at 400 N/mm²: 10 x 10 corresponding to 14 mm bevel at 45° at 600 N/mm²: 8 x 8 corresponding to 11 mm bevel at 45° Max. Sheet thickness (mm) 6 - 30 (40) Bevel angle (°) 15 - 50, infinitely variable Cutting speed (m/min) approx. 3.1 Dimensions (mm) 530 x 650 x 400 Weight (kg) 78 Motor power 4 / 3 Advantages: V 2020/10

Condition: used, Year of construction: 2000, pointing milling machine für Stangen carbide turnover plates 4 Stück working area Rund, Profil+vierkant mm working range 80 (100) an 25 mm milling drive 380/420V, 18,5 KW, 50 Hz kW Bdsdpfx Abjg Akgtobjk revolutions per minute Fräsantrieb: 1465 U/min . clamping devices hydraulic pneumatic hydraulisch infeed device hydraulisch ca. 5 lfdm x 300 mm hydraulic power unit Rexroth tank 250 l coolant tank mit Spänekasten l switchgear cabinet mit Klimaanlage control SIEMENS S 7-300 +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Technical details: voltage: 380 V Bodpfxju Ngfds Abbodk total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Condition: new, Semi-automatic chamfering machine Development and production in England - Automatic chuck with material sensor - automatic spindle start when the cutting head moves - max. speed 1,500 rpm - max. bar diameter 80 mm - bar support adjustable - max. chamfering/turning length 37 mm - precision three-jaw chuck - large chip collector for easy cleaning Bdjdpfx Ascacn Eobbok - easy to move with pallet truck - weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (mist) € 3.250,- - adjustable fence + universal chamfering tool € 1.870,-

Condition: ready for operation (used), Dowel Cutting and Chamfering Machine Manufacturer: Löser Type AA 200 Table-top machine for the production of wooden dowels, for the efficient cutting and chamfering of dowel rods/round bars. The Type AA 200 Dowel Cutting and Chamfering Machine is a low- to medium-performance machine. It can cut and chamfer round bars made of wood, plastic, laminated paper, and other materials. The dowel length is adjustable between 20 and 150 mm and is determined using a setting scale. The chamfer thickness can be adjusted as required. Bedpfxewmpvho Abbodk The machine is equipped with a magazine ring as standard. This allows the operator to operate several machines simultaneously or perform other tasks. The machine features a solid, torsion-free cast iron stand. Extremely easy operation, simple maintenance, and easily accessible lubrication points are further advantages of this machine. Technical specifications: For dowel diameters approx. 6-13 mm Minimum cutting length: 15 mm Largest cutting length: 150 mm Output: approx. 2,000 pieces per hour Weight: 53 kg (tabletop machine) Including adapters for dowel diameters 8-9 mm, 10-11 mm, and 12-13 mm. The pinion and chain have been replaced.

Condition: excellent (used), HSS saws chamfering machine Peruzzi model SAUT 550, fully reconditioned and newly painted, like new Bdjdpfxshzccts Abbek

Condition: used, Bar pointing/chamfering machine PAREX Bdsdpfxoxdnwpj Abbsk

Year of construction: 1991, condition: used, max. wheel diameter 400 mm max. number of teeth 150 max. module 5 total power requirement 16 kW weight of the machine ca. 10 t Workpiece Ø, min./max. 30 - 400 mm Number of teeth 6 - 150 Module range, max. 5 Tool holder shaft Ø SK 30 / 20 Tool speeds 4,000 rpm Spindle drive max. infinitely variable 1.8 kW Feeds, longitudinal and cross 0.001 - 12 m/min Workpiece speed, max. (1.5 kW) C Axis 2,000 rpm Workspindle slide 400 mm Tool speed, max. 3,000 rpm Tool holder SK 30 Bdodpfet Hwylsx Abbsk Total electrical load, approx. 16 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * BWO (HECKLER & KOCH) CNC Control model 785 H for altogether 7 axes. Input via monitor. The control has all the supervision and fault diagnosis features necessary for fully automatic working process. * 2 workspindle units, left and right, which can be set at any angle. * CNC controlled: Z and W Axes for tool cross slide. X and U Axes for tool longitudinal slide. * L and O Axes for milling spindle. C Axis for workspindle rotation. * Manually controlled: Tool slide rotary table (B and E Axes). Tool slide vertical infeed (V and Y Axes). Tilt of tool head (A and D Axes). All axes have digital display in the control. * Hydraulically operated workpiece clamping device in conjunction with an automatic loading device using workpiece feed / conveyor belt and swivelling loading device, as well workpiece control by air. * Coolant equipment with chip conveyor. * Noise protection cabin. * Central lubrication. * Built-on hydraulic unit. * Pneumatically driven safety doors. * Deburring device, etc. The machine uses the hypocycloidal milling principal, with electronically synchronized tool and workpiece axes for working straight roof-formed teeth, symmetric as well as asymmetric forms. Advantages are high precision and productivity. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract Thank you for your interest. We always have a good selection of gear machines available on stock.

Year of construction: 2024, condition: new, functionality: fully functional, ø 110-450 mm, wall thickness max. 72 mm Bdedot A Ufdepfx Abbsk Servo steel infeed and synchronization. NEW, unused

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine was extensively overhauled for €7000. Proof available. Working processes: - 60° chamfering - longitudinal turning up to maximum 40 mm - Center drilling Work process fully automatic: - Clamping, chuck closed - rapid traverse forward - Work feed - Dwell time for cutting out - Rapid traverse back - Unclamp, chuck open Technical data: max. workpiece diameter round 80 mm max. workpiece diameter hex-SW 70 mm min. workpiece diameter round and hex 10 mm min. Workpiece length 450 mm Speed range stepless Stage I/Stage II = 51-306/102-612 Bdodpfeiamn Sox Abbek Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1,3/1,8 Motor power coolant motor kW 0,07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 560x500x580 mm Bodpfxjvz Hf De Abbjdk Weight 80 kg Total power requirement 0,75 kw

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. Bdedpfx Aboghrgujbsk The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines.

Year of construction: 2007, condition: good (used), machine/vehicle number: 1380-1207, >with Siemens Sinumerik Panel Control >with chip conveyor >control panel >electric cabinet >capacity through spindle 60 mm Bdedom Nb Rijpfx Abbek >max. piece length 340 mm

Year of construction: 1991, condition: used, max. wheel diameter 0 mm Bdodpot Hwv Hsfx Abbek max. number of teeth 0 max. module min. module total power requirement kW weight of the machine ca. t dimensions of the machine ca. m CNC controlled milling machine for synchronous rings

Condition: good (used), Aceti Beveling Machine Good condition, fully functional, can be inspected and tested on site. Shipping also available abroad. Bdodpfx Aov Nw Raobbok Inspection: To avoid any misunderstandings, I would like to point out that the item can be inspected and tested under power before purchase. Please ask questions before purchasing to avoid any confusion. For general questions or to schedule an appointment for an inspection, you can contact me at any time at the telephone number below or above. Errors in the description and subject to prior sale excepted. VAT is shown separately on my invoices. Shipping via freight forwarder.

Condition: new, Semi-automatic chamfering machine Development and production in England - Automatic chuck with material sensor - automatic spindle start when the cutting head moves Bsdpfx Abegkah Tsbodk - bar diameter 26-105 mm a 2nd cutting head is required for smaller diameters - adjustable bar support - max. chamfering/turning length 45 mm - Overturning & chamfering tool - precision three-jaw chuck - large chip collector for easy cleaning - easy to move with pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year guarantee CE - certified OPTION: - adjustable fence + universal chamfering tool € 1.870,-

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1000x900x1400 mm Bsdpjvz E Uqjfx Abbedk Weight 680 kg Total power requirement 12 kw

Condition: new, MFR is a stand-alone machine intended to produce pallets on a smaller scale. How does it work? The operator manually feeds the machine with boards and the boards are then automatically chamfered. The chamfered boards are thereafter collected in a magazine. Machine specification: Standard performance Operators: 1 Length: Chamfering unit 3,7 m, total 5,9 m with the chamfered board magazine (2,2 m) included Width: 1,2 m Bsdowduvnjpfx Abbedk Height: 1,7 m Power: 5 kW, 3x400 V+N Pneumatic system: 7 bar compressed dried air: 100 L/min Should be filled and controlled: Container for lubricating oil Cyclone hose diameter: 100 mm Cyclone fan capacity: 1000 m³/h Machine capacity: 12 boards/min (max length 1600 mm) Standard equipment: 1 separate electric motor 3 kw 2800 r/m 2 cutters 4000 r/m

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm Bsdpfx Asqpdkcebbsdk - Capacity: about 7,500 - 15,000 dowels/hour

Year of construction: 1975, condition: used, max. wheel diameter 280 mm max. number of teeth 100 max. module 6 min. module 1 total power requirement 6 kW Bdsdpfx Aet Hw Dkebbjk weight of the machine ca. 2500 kg dimensions of the machine ca. m

Condition: new, Manual chamfering machine Development and production in England - Variable adjustment of spindle speed - max. bar diameter 26-105 mm a 2nd cutting head is required for smaller diameters - Adjustable bar support - max. chamfering/turning length 45 mm - Overturning & chamfering tool - precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year guarantee CE - certified Bdodpfx Abegi Rnwobsk OPTION: - adjustable fence + universal chamfering tool € 1.870,-

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1200x930x1080 mm Weight 390 kg Bodpfx Ajvz Et Hjbbsdk Total power requirement 1,5 kw

Condition: new, Automatic chamfering and starting machine Development and production in England - CNC Mitsubishi control M70 - automatic start of the cycle - automatic switch-off for repeatable chamfering lengths - color touch screen control panel - max. spindle speed 3,000 rpm - bar diameter 8-80 mm - hydraulic 3-jaw chuck - cutting head suitable for all material sizes - quick-change ISO cutting inserts - max. chamfering/ turning length 37 mm - 4 kW motor - high-precision Mitsubishi servo drive - Ball screw drive with high thrust capacity - Large machine door - Internal, powerful LED work light - Spoke collection container with external spoke basket - Lifting points for pallet truck - Weight 500 kg - Dimensions L/W/H 1000x600x1200 mm CE - certified Bodpfxecb E Hns Abbedk OPTIONS - Oiling (oil mist): € 2.890,- - Universal chamfering head: € 1.040,- - 8kW motor for hard materials: € 4.150,-

Condition: new, Manual chamfering machine Development and production in England - Variable adjustment of spindle speed - Max. bar diameter 80 mm Bdodpfx Ajbwfh Uebbsk - Adjustable bar support - max. chamfering/turning length 37 mm - Precision three-jaw chuck - Large chip collection container for easy cleaning - easy to move with pallet truck - weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - adjustable fence + universal chamfering tool € 1.870,-