Used Swiss Speedy for sale (501)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Gedpfx Abszw Apgjiebw Please note: We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, Year of construction: 2022, functionality: fully functional, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, grinding wheel bore: 20 mm, We offer this used Iseli Swiss BNF 100, a fully automatic 4-axis surface grinding machine, manufactured in 2022. Gsdpfxoz E Spco Abisbw Manufacturer: Iseli Swiss Model: Fully automatic 4-axis controlled flank grinding machine for band saws in wet grinding version / Type BNF100 Year of manufacture: 2022 • Flank grinding machine for set, as well as stellite and carbide-tipped band saws • Full enclosure with intensive water cooling • Equipped with a 4-axis CNC control system • Each movement is individually controlled via servo motors, resulting in minimal idle times • The advanced saw tooth can be finished in a clamped position • Electrically controlled, central saw blade height adjustment • Height stop for precise saw blade positioning • Use of roller linear guides for the CNC axes (stiffer machine construction and significantly increased service life) • Pneumatic saw blade clamping • Pneumatic additional clamping to stabilize thin saw teeth, resulting in increased dimensional accuracy • Operation via touch screen / color display • Data can be retrieved via the control system (standard storage space for 99,999 data sets) • Metric or Anglo-American measurement system selectable (mm or inches) + Dust extraction and auxiliary feed Technical data BNF100 Flank clearance angle: 0 - 7° Tooth pitch: 13 - 100 mm Blade width standard: 75 - 360 mm Blade width optional: 25 - 360 mm Blade length standard: from 5,300 mm Blade length optional: from 4,300 mm Grinding wheel variant 1: Ø 100 - 125 mm Grinding wheel variant 2: Ø 75 - 100 mm Grinding wheel bore: Ø 20 mm If you have any questions or need more information, please send us a message or call us.

Year of construction: 2000, condition: excellent (used), Max. batch weight: 3 kg Drum volume: 2.5 l Motor power: 0.18 kW The centrifuge was used for the recovery and separation of precious metal shavings (gold, silver, platinum). The condition is very good. Gsde Ahwl Ejpfx Abisbw

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC-controlled flank grinding machine for band saws • Grinding mist extraction fully integrated into the base machine • Equipped with a 4-axis CNC control system • Each movement can be controlled individually via stepper motors, resulting in minimal idle times • The clearly arranged display also serves as an operating element via a touchscreen • The advanced saw tooth can be finished-ground multiple times in one position • Pneumatic additional clamping device for stabilizing thin saw teeth, thereby increasing dimensional accuracy • Powerful coolant system with full enclosure • With a special program (option), variable tooth widths, tooth pitches, and tooth heights can be ground * Feed from the left Technical data: • Tooth pitch: 15 - 100 mm Gedpfx Abez Hdpweisbw • Flank clearance angle: 0° - 7° • Blade width: 75 - 360 mm • Blade length: from 5.3 m • Cup grinding wheel diameter: 75 or 100 mm • Bore diameter: 20 mm Blade height measuring device for band saws and ripsaws Safety package for cleaning system with flow monitor and pneumatic valve Machine-side connection to cleaning system for ISELI machines bc130, bc240, bc325, em300 Yellow signal lamp Grinding programs / software licenses Program for variable tooth pitches. The tooth pitch is entered on the machine's touchscreen Setup of band saws 1 set of lateral and rear blade supports, setup for narrow band saws with eccentric clamping from 25mm, vernier adjustment for the flank angle adjustments on the tooth back and tooth face, pneumatic additional clamping device for cup grinding wheels with diameters of 75 mm + 100 mm Flank grinding with radius, flank measuring device for protrusion and cutting gap.

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: S2926SMA0099.10801, Laminator from the Swiss company 3S ( Swiss Solar Systems ). Data available in photos. Gbsdpfx Absvad Imjiow

Condition: ready for operation (used), Year of construction: 2001, This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information. • Plastic-metal composite pipe system • Control: iNOEX aurex ERS 36 Gbedpfx Abs Agt U Teisw • Pipe diameter 14, 16, 18, 20 mm • Material LDPE-MDPE-HDPE, silane-crosslinkable PE • Diffusion barrier aluminium thickness 0.15 - 0.4 mm • Line speed max. 40 m/min. • Axle height 1000 mm

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 30 kg, Factory liquidation for mask production. Installed in 2021, out of operation since March 2022. The equipment has already been dismantled and is ready for delivery. Stationary industrial vacuum cleaner Power: 2.2 kW Airflow: 300 m³/min Gbjdjxqghtopfx Abiow Suction connection: 40/50 mm Weight: 30 kg

Condition: excellent (used), Year of construction: 2010, operating hours: 5,285 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 105 W, type of cooling: air, total width: 1,240 mm, total height: 1,140 mm, total length: 1,920 mm, overall weight: 580 kg, travel distance X-axis: 1,245 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 610 mm, input current: 20 A, laser wavelength: 10,600 nm, input frequency: 50 Hz, Speedy 500 in good condition, coming from a model-making workshop. Few operating hours (5285 hours). Gbedoz Eh Easpfx Abisw Laser source replaced in late 2018 (Synrad firestar ti100; nominal 100 W, 151 W as a new part; 2392 hours of operating time). Power supply also replaced in 2018 (Meanwell RSP-2400). Last service: 08/2026 Extensive accessories included: Laser pointer for precise alignment of the workpiece 5.0" lens 2.0" lens Pass-through – for processing longer sheets Gas kit Cutting table Vacuum table Honeycomb table / aluminum honeycomb core for vacuum table Rotary engraving attachment – for bottles, glasses, etc. iCut software and camera (currently disassembled) Includes Mistral ECO 220V / 50HZ extraction system (motor relatively new). Original new price: €86,708.58

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: S36-1969, laser power: 60 W, type of cooling: air, total width: 830 mm, total height: 1,055 mm, total length: 1,221 mm, overall weight: 300 kg, We present the Trotec Speedy 360 CO2 laser with a power output of 60 watts, manufactured in October 2020. Equipped with Sonar autofocus technology, this laser is ready for immediate use and is fully functional. The scope of delivery includes: - Trotec Speedy 360 60-watt air-cooled laser and Atmos Duo plus HEPA 230V - Laptop including Win10 and CorelDraw - Aluminum grid cutting table - with pump for air supply - Rulers in mm - with masking tape - Extraction nozzle 75mm - Connection cable Technical data: Gbsdpfx Ajzzkg Ijbiew - Working area: 813 mm x 508 mm - Dimensions: 1221 x 830 x 1055 mm - Laser power: CO2 60 watts - Laser source: CO2 laser, digitally controlled, air-cooled - Air assist: Improves cutting results by blowing away heat and gases - Movable starting point: Enables precise selection of the starting position for laser engraving/laser cutting - Resolution: User-selectable from 100 to 1000 dpi - Connection: USB interface

Year of construction: 2023, condition: excellent (used), functionality: fully functional, The 2023 Nilma Speedy Cutter is a reliable piece of equipment designed for efficient slicing and dicing in various food processing environments. This used model retains its robust functionality, making it a cost-effective choice for kitchens seeking high performance without the expense of brand-new machinery. Gbedeztxy Tjpfx Abisw Engineered with precision, the Speedy Cutter offers consistent and uniform results, catering to a range of fruits, vegetables, and other ingredients. Its intuitive controls and easy-to-clean components ensure smooth operation and maintenance, optimizing productivity. Built to Nilma’s high standards, the Speedy Cutter embodies durability and practicality. This cutter is an excellent choice for anyone in need of dependable equipment that can significantly enhance food preparation processes.

Condition: good (used), Year of construction: 1992, For sale is a fully functional, robust agricultural drying line that was recently used successfully for the efficient drying of sawdust. The system is ideally suited for sawmills, pellet and biomass producers, or agricultural service providers. Versatile application: Optimized for sawdust and wood flour, also suitable for straw, grain legumes, or specialty crops. Gbedpsz I Efpefx Abiow Reliable technology: Solid machine construction quality, designed for continuous operation and high throughput. Energy-efficient: Well-designed airflow for optimized heat consumption. Condition & availability: The system is in well-maintained, operational condition and can be inspected while powered on after prior arrangement.

Condition: used, Year of construction: 2019, machine/vehicle number: S4-3044, input voltage: 230 V, type of input current: AC, laser power: 120 W, type of cooling: air, total width: 1,428 mm, total height: 1,050 mm, total length: 952 mm, overall weight: 300 kg, laser wavelength: 10,600 nm, input frequency: 50 Hz, For sale is a used, professional Trotec Speedy 400 CO₂ laser engraving and cutting machine, manufactured in May 2019. The machine is in used condition, commensurate with its age and previous use. Technical data: Manufacturer: Trotec Laser GmbH, Austria Model: Speedy 400 Year of manufacture: May 2019 Serial number: S4-3044 Laser type: CO₂ laser Maximum laser power according to the nameplate: 120 W Working area, typical for the model: approx. 1,016 × 610 mm Power connection: 230 V / 50–60 Hz Rated power consumption: 1.9 kW Known operating condition: Gsde Adrb Nopfx Abiebw The machine could be switched on and operated via the integrated control panel. The following functions could be checked: The X and Y axes of the laser head can be moved via the control panel. The height-adjustable work table can be moved via the control panel. The axes and the table could be moved to various positions. The red pilot/positioning laser is visible. The operating and control indicators are active. Important note regarding the laser: The actual condition of the CO₂ laser source is unknown. The operating hours and the remaining available laser power are unknown. A complete engraving or cutting test has not been performed. Scope of supply: The offer includes the Trotec Speedy 400 shown in the pictures, with the existing work table, laser head, and control panel. A separate extraction system, a control PC, and software licenses are not included in the offer.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 18 h, actuation type: electric, controller manufacturer: Trotec, laser type: CO₂ laser, laser source manufacturer: Trotec, laser hours: 10 h, laser power: 120 W, laser wavelength: 10,600 nm, working length: 1,016 mm, working width: 610 mm, working height: 305 mm, feed rate X-axis: 259 m/min, feed rate Y-axis: 259 m/min, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, type of cooling: air, warranty duration: 24 months, Equipment: CE marking, emergency stop, We are offering this almost new Trotec Speedy 400 engraving and cutting machine with a factory warranty. It is stored in an adequately dust-free environment with the correct temperature and humidity. Machine data as of 01-10-2026: - Total machine operating time: 18 hours and 8 minutes Gjdpsz Il Aujfx Abiobw - Total laser source operating time: 9 hours and 21 minutes - Total registered travel distance: 241,066 meters Model: Speedy 400 Manufactured: March 2026 Country of origin: Austria Supply voltage: 230 V AC Frequency: 50/60 Hz Rated power: 2100 W Wiring diagram: 8086_Speedy400_wiring Laser type: CO₂ Laser power: 120 W New price: € 76,040 If you have any questions or would like more information, please send a message or call. The pickup date will be determined in consultation. 2 industrial fans for air extraction can also be included.

Condition: good (used), Year of construction: 2022, operating hours: 1,700 h, functionality: fully functional, laser power: 45 W, - Manufacturer: Trotec - Model: Speedy100c-8063 - Year of manufacture: August 2022 - Serial number: S1-7145 - 45 Watt CO2 - 230 V - 50 Hz - with autofocus - with air assist - with 2.0" lens - with cutting table 12.7 mm - with Performance Upgrade - with X-axis with 2 carriages - Scales in mm including: - Extraction unit - Manufacturer: Aigner/Trotec - Model: 8401 Atmos Cube Speedy 230 V - Serial number: 01732-18928 - Extraction connection cable Additionally available: Large lot of engraved parts made of wood, plastic, etc. Various shapes/motifs Shipping possible on request. Gbsdpfxoygl Nve Abijw Sale to commercial customers only.

Condition: good (used), Welded frame, used Manufacturer: CREA-SWISS Technical Data Brand: CREA-SWISS Max. frame size: 3,000 x 2,400 mm Min. frame size: 470 x 610 mm Profile height: up to 115 mm Height tolerance compensation: from -1 mm to +1 mm Dimensions: L 3.6 x W 1.5 x H 2.0 m Weight: 280 kg Advantages Godpfx Abey At A Deisbw - Single-operator device: set external dimensions, insert profiles, adjust height differences, and weld completely on both sides, all by one person - Precise adjustment for accurate frame construction - Rotatable around the longitudinal axis - Fully welded in a single clamping - Fine adjustment of miter edges - Mobile workstation on castors - Suitable for all types of frames (steel windows, fire doors, or angle steel frames) All information provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: S36-0330, laser power: 80 W, Trotec Speedy 360 – CO₂ laser with a brand-new laser tube, fully serviced Invest instead of repairing – this Trotec Speedy 360 is ready for immediate use and impresses with its exceptionally well-maintained condition and a newly installed laser tube. For sale is a Trotec Speedy 360 CO₂ laser engraving and cutting system, which has only been used in a professional setting and has always been carefully maintained. The machine is in very good condition, both technically and visually, and is immediately available for productive use. A new laser tube was installed before the sale. This means you not only get a proven industrial laser but also benefit from one of the most valuable wear parts in new condition. This significantly reduces the investment risk and enables a direct start to production without additional follow-up costs. Proven Trotec quality The Speedy 360 has been one of the most powerful and reliable CO₂ laser systems in its class for years. Its high processing speed, precise positioning, and excellent repeatability make it the first choice for professional users in industry, crafts, and advertising technology. Whether for individual production or series production – the Speedy 360 consistently delivers precise results. Gjdpfx Abozlb Abeiobw Versatile applications The machine is suitable, among other things, for processing: ✔ Acrylic ✔ Wood and plywood ✔ MDF ✔ Leather ✔ Paper and cardboard ✔ Rubber ✔ Textiles ✔ Plastics ✔ Glass (engraving) ✔ Coated metals (marking) This makes the laser ideal for companies in the fields of advertising technology, sign manufacturing, model making, personalization, industrial marking, or prototype construction. Your advantages at a glance ✔ New laser tube – ready for immediate use ✔ Very well-maintained overall condition ✔ Precise engraving and cutting quality ✔ High working speed ✔ Proven Trotec technology ✔ Easy operation with JobControl ✔ Reliable industrial machine with high value retention Inspection is highly recommended We invite you to personally inspect the excellent condition of the machine. An inspection and a test run can be arranged at any time by appointment.

Condition: used, Year of construction: 2021, Laser power: 45W, laser wavelength: 10.6µm, supply voltage: 230V, frequency: 50/60Hz. Including Aigner/Trotec Atmos Cube Speedy extraction system, year of manufacture: 2021, airflow rate: 320m³/h, negative pressure: 8500Pa, power consumption: 1.2kW, operating hours of the extraction system according to the display: approx. 296h, as well as additional accessories. The machine is in excellent condition and has very few operating hours. Inspection possible by appointment. Gbsdpj Ahi S Rjfx Abiew

Condition: used, STAR SB-20R type N is a CNC automatic lathe (CNC Swiss type) engineered for high-precision work with superior accuracy and reliability. Capacities: max turning Ø 20 mm, max drilling Ø 10 mm, max threading Ø 8 M; total 5 axes, C-axis resolution 0.001°. Specs: spindle stepless 500–10000 t/min, rapid traverse 35 m/min, spindle motor 2.2/3.7 kW, total power 3.7 kVA, 50 Hz 3x 400 V, weight ≈1800 kg, dimensions L2070 × W1770 × H1760 mm. Accessories: C axis, workpiece conveyor, chip conveyor, coolant system, RS232 and USB interfaces. Achieves tight tolerances; ideal for automotive, watchmaking, machine tools, aerospace and medical sectors. Gbedps Ai Sfmsfx Abisw

Condition: used, TECHNICAL DETAILS - Number of axes : 6 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Travel : 130 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 5.5 [kW] - C axis indexing precision : 0.001 [°] Gbodpfxj Akfp Do Abisw COUNTER-SPINDLE - Max. bar diameter : 13 [mm] - Z stroke : 130 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 90 [°] GUIDE BUSH HOLDER 1 - Number of positions : 3+3 GUIDE BUSH HOLDER 2 - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 3 POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1770 X 950 [mm] - Machine height : 1720 [mm] - Machine weight : 2000 [kg] MACHINE HOURS EQUIPMENT - CNC : Fanuc Oi-TF - Rotating guide bush - Parts catcher - Ejection of workpiece - Chips conveyor - Coolant tank : KNOLL [l] - Bar loader : FMB MINIMAG 20/3200 - Oil mist extractor - Fire extinguisher *

Year of construction: 1998, condition: ready for operation (used), A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible. Gbodpfxjyhgnie Abijw

Year of construction: 2013, operating hours: 5,200 h, condition: excellent (used), functionality: fully functional, We offer this very good Comandulli SPEEDY SYSTEM D8 automatic stone edge polishing machine, year of construction 2013. Manufacturer: Comandulli Model: SPEEDY SYSTEM D8 Year of construction: 2013 Condition: very good If you have any questions or need more information, feel free to send us a message or give us a call. Gjdpfjycxyaex Abijbw

Condition: used, first registration: 05/2011, total width: 2,550 mm, Key Features Internal Reference: 24569N Vehicle Model: Insulated body / Cover / Swiss-Vehicle Vehicle Brand: Peter Product Category: Concrete silo Gedpfxez Hp T Is Abisbw Condition: Used Date of first registration: 05/13/2011 Weights & Dimensions Vehicle width: 2550 Body Body manufacturer: PETER Body model: Insulated body / Cover Internal dimensions of body (l x w x h): 15 m³ Year of body manufacture: 2011

Condition: used, empty load weight: 8,800 kg, maximum load weight: 27,200 kg, overall weight: 36,000 kg, first registration: 11/2007, total length: 13,600 mm, total width: 2,600 mm, total height: 3,950 mm, operating hours: 7,490 h, Equipment: ABS, cooling unit, electronic stability program (ESP), Key Features Internal Reference: 26387M Chassis Number: WSJ TKS 324 7TJ 051 98 Serial Number: 312.765.160 Vehicle Model: TKS 24 Carrier 1850 / Swiss-Vehicle Vehicle Make: Arcon Product Category: Refrigerated Box Trailer Condition: Used Hours: 7490 Date of First Registration: 11/16/2007 Last Roadworthiness Test (MFK or TÜV): 10/02/2025 Suspension: Air-Air Cab Vehicle Equipment: ABS, ESP Axles & Tires Axle 1: 385 / 55 R 22.5/8mm, Disc brakes, Air suspension Axle 2: 385 / 55 R 22.5/10mm, Disc brakes, Air suspension Axle 3: 385 / 55 R 22.5/10mm, Disc brakes, Air suspension Number of Axles: 3 Weights & Dimensions Gedpfx Aez Hn Hgebiobw Gross Vehicle Weight: 36000 Payload: 27200 Unladen Weight: 8800 Vehicle Height: 3950 Vehicle Length: 13600 Vehicle Width: 2600 Body Body Manufacturer: ARCON Body Model: Refrigerated Box Body Year of Manufacture: 2007 Refrigeration Unit Refrigeration Unit Make: Carrier Cooling Capacity (Temperature): 30 Monitoring: Yes Zones: 1-Zone Refrigeration Unit Year: 2007 Refrigeration Unit Features: Double-wing door, Load securing rail

Condition: good (used), Year of construction: 1996, functionality: fully functional, turning diameter over bed Ø16 mm mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2045 x 900 x 1685 m Gbjdpfx Abeztfw Esijw

Operating hours: 2,485 h, condition: excellent (used), first registration: 06/2021, total width: 2,550 mm, Equipment: crane, Key Features Internal Reference: 2605SK Vehicle Model: Effer 305/6S / Swiss-Vehicle Vehicle Make: Other Product Category: Truck Crane Condition: Used Mileage: 0 Hours: 2485 Gbjdjz Hn Iwspfx Abiew Date of First Registration: 15.06.2021 Overall Vehicle Condition: very good Weights & Dimensions Vehicle Width: 2550 Superstructure Superstructure Manufacturer: EFFER Superstructure Model: 305/6S Superstructure Year of Manufacture: 2021 Crane Crane Equipment: Start/Stop, Tool Hydraulics Crane Manufacturer: EFFER Crane Type: 305/6S Crane Lifting Moment: 1195 Crane Year: 2021 Crane Reach (m): 16.79 Crane Radio Remote Control: Yes