Used other deburring machines for sale (43)

Year of construction: 2026, condition: new, working width 950 mm workpiece width - max. 1,0 - 50 mm sandingbelt width 970 mm sandingbelt length 1900 mm weight of the machine ca. 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. * Suitable for processing steel, stainless steel and aluminium. * The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. * The two rotor heads ensure an all-round uniform Edge rounding and a directionless finish. * The intuitive operation via touch panel allows every employee get to grips with the machine quickly. * The SMD 1 models are installed and ready for operation in a short time. * The compact design saves valuable production space. * Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces. Pgjdpfx Acjvfhm De Ast consisting of: - Grinding machine SMD 123 RE (kit): - SMD 123 RE conveyor belt cleaning - SMx xx3 - sanding belt +120 Cubitron II, W=970, L=1900 - SMD 1x3 set grinding flap roller 3-piece. P120 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Year of construction: 2026, condition: new, working width 1000 mm workpiece width - max. 0,5 - 50 mm sandingbelt width -- mm weight of the machine ca. 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. * Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. * A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. * Machining on both sides saves time-consuming turning of the workpieces and edit twice. * All pairs of aggregates can be switched on/off separately depending on the application as well as to be set. * Including Siemens S7 control: - Easy and comfortable operation through intuitive user interface - High operating security through 3 password-protected user levels - Integrated program memory - USB / RJ 45 interface for data exchange or connection of external Components (e.g. barcode scanner) - Direct entry of material thickness via touch panel - All axes automatically adjust to preselected material thickness - Standby position for deactivated aggregates - Service-friendly (e.g. plain text error messages) consisting of: - Grinding machine SBM-L 1000 G1S2 (kit) - 4x sanding belts SBM 1000 with bar P60 SiC Pjdpfx Ajuia Dqec Aegt - Sanding belt SBM-L 1000 L=3125 B=70 P80 Cubitron 2 784F - SBM-L tool wear compensation Siemens S7 - DDE 3002 dry suction - Standard piping DDE 3002 / WDE 3002 for SMD 123, SMD 133 Further detailed technical data on request. The machine is in stock Niederlangen available immediately.

Condition: new, working area L-W-H 1000 x 900 x 900 mm range L-W-H 1300 x 1750 x 2200 mm weight 350 kg Description: - Compact and elegant design - Easiest operation - low material consumption - optimal use of space Pgedpfexaatzjx Ac Aot - highly effective dedusting - efficient way of working - Environmentally friendly working without dust nuisance - controllable material consumption - Any conventional, dry abrasive is suitable as a blasting material * such as B. corundum, steel sand, glass grain, glass beads, ceramic beads

Condition: new, Model Name Anfassystem UZ12 ULTRALIGHT Podpok D Nyiefx Ac Ajgt

Condition: new, Model Name Anfassystem B22 ZERO Pjdpfx Acsk Au Dvj Asgt

Condition: excellent (used), functionality: fully functional, Enhanced finishing solution for metal 3D printed components EXTRUDE HONE technology opens the door to a very economical, fast, controllable, flexible, and environmentally friendly process for enhanced surface finishing of metal 3D-printed parts. We have a used machine in stock for immediate delivery. This machine has only been used briefly and is in excellent condition. FEATURES and BENEFITS + Efficiency in enhanced surface finishing. Material removal rate (μm/min) faster than other methods on the market; e. g. up to 3 times faster than electro-polishing. + Tooling out of the printer. Tooling and fixtures are built at a reasonable cost since they are 3D-printed. + Highest flexibility. We provide a complete & optimized cathode and fixture design for your components within two working days. Pedpfxov Awrws Ac Aogt + Multiple material master packages Specific parameter files per alloy family. + EXTRUDE HONE Connect From CAD to part, remotely: loading of parameters, upgrading material packages, software, and maintenance. + Make it easy. The all-new and simple operating concept limits the data input to 4 simple parameters – parameters everybody understands.

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- Podpfxek Egrts Ac Aogt site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: new, Model Name Psdpfxok Au Dre Ac Ajgt B3 Entgrat-/Anfasmaschine

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg Pedpfx Aek Uqhajc Aogt The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Psdoppgcyjpfx Ac Aogt Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, Year of construction: 2025, pipe diameter (max.): 48 mm, power: 0.55 kW (0.75 HP), input voltage: 400 V, At Duralbend, we are manufacturing high-quality deburring machines designed to meet the needs of various industries. Deburring is a crucial process for removing sharp edges and imperfections from metal tubes, ensuring a clean, smooth finish. Our deburring machines, capable of handling tube diameters up to 48 mm and 60 mm, are perfect for industries like automotive, furniture, and construction. Pjdpfx Acsvx D Eco Aegt

Condition: new, Trovalizing and lapping machine Manufacturer: ASSFALG Model: TV 95-SL Condition: New machine Speed: 1,500 - 3,000 rpm (stepless) Internal dimensions of the trough: 498 x 384 x 410 mm Filling volume: 70 l Standard equipment: - Timer - Water tank Pgjdpfedwq Hgjx Ac Aet - Water pump - Operating manual

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 20 mm speeds 2850 U/min range of angles 0 - 60 (stufenlos) ° weight of the machine ca. 19,5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for the Pgsdeppgcvopfx Ac Aot so-called FACING - removing an unwanted layer of material on the Front side of the workpiece, which is created, for example, by flame cutting a sheet metal. Specially developed for the production of visible chamfers and weld preparations. Powerful electric drive for extreme Charges. * High performance motor * stepless adjustment of the working angle in the range of 0° - 60° * FACING - Edge processing at an angle of 0° to remove unwanted ones Layers of material after flame cutting * The unique mechanical scale to adjust the bevel width for higher precision * A very compact and ergonomic design for high work productivity * Circumferential protective frame against damage and versatile grip options * With the appropriate accessories, pipes from D= 150 mm can also be processed * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 Mpa / 0 - 16 mm = 400 Mpa - Motor: 1100W

Condition: new, Metal deburring and edge rounding machine – DM1100 C – performs edge rounding and removes sharp edges on both external and internal contours of stainless steel, steel or aluminium parts either cut in laser, shear or punching machine. This machine works metal parts of different dimensions including products as small as 50x50mm. DM1100 C – Metal Deburring Machine has a station with double cross belts for the metal deburring and edge rounding, leaving clean, soft and burr-free edges on the complete parts. High performance on all edges and also on internal holes. Two cross belts mounted with abrasive blocks run in opposite directions, completing edge rounding on the complete area of the part. DM1100 C can edge round parts with plastic foil, keeping the original finishing and assuring the work purely on the edges. Technical Specifications: Pjdsd Evcwjpfx Ac Aegt Working capacity (mm) 1100x50 No. Cross belt stations 2 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.6-3.2 Cross Belt Motor (kW) 3 Feeding motor (kW) 0.18 Total power (kw) 6.2 Consumption (A) 13 Dust extraction connection per head (Ø mm) 100 Dimensions (mm) 2270x1560x1940 Weight (kg) 1200

Condition: new, Deburring machine Manufacturer: Assfalg Model: AF 165 Condition: New machine Pjdpfx Aedurxnec Asgt Rotational speed: 2,800 rpm Maximum chamfer width: 1 mm Standard equipment includes: - Special flap disc, grit size K80-ST - Dust extraction port - Operating manual

Condition: new, diameter -- mm workpiece length -- mm work piece width 0 - 3 mm speeds 3600 U/min range of angles 30 - 60 (stufenlos) ° Pgodpeppgcrefx Ac Aot weight of the machine ca. 31 kg dimensions of the machine ca. 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. * Scale for setting the processing depth * Security cover * Adjustable processing angle * For steel, stainless steel, aluminum and other materials * Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual

Condition: new, Edge and contour milling machine Manufacturer: Assfalg Model: KKE 1 Condition: New machine Speed: 8,000 - 24,000 rpm (continuously variable) Maximum chamfer width: 3 mm Standard equipment includes: Pgedsbhfzbspfx Ac Aot - Guide rail - Allen wrench, open-end wrench - Insert ring Ø 30 x 8 mm - Collet Ø 6 mm with lock nut - Operating manual

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed Pgsdpfx Aer I E Exoc Aet The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on