Used Anfas for sale (58)

Condition: new, loading space length: 5,300 mm, loading space width: 2,300 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane ELLERMANN roll-off container according to DIN 30722-1 Standard container Type S 77 with crane platform Internal dimensions: approx. 6.5/5.3 x 2.3 x 2.0 meters (all dimensions are approximate) Usable volume: approx. 24 m³ Paint finish: RAL 7016 (anthracite gray) ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outer rollers and subframe made of INP 180 Outer rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support is reinforced with 10 mm knee plates ? Crane platform 20 mm thick on the end face, length approx. 1,200 mm Reinforcement on the end wall support and subframe on the inside Additional stiffening on the end support ? Crane cutout on the end wall (according to Fassi drawings) ? Bottom pan made of 5 mm St 37.2 (S235JR) ? Side walls made of 3 mm St 37.2 (S235JR) ? Rounded bottom pan, raised approx. 250 mm towards the side wall ? End profile made of sturdy round tube Ø 90 mm ? Spant spacing 750 mm Spant profile U 80 x 50 mm ? On both sides, 1 x transverse spant in the middle, fully welded ? Double-wing door at the rear with Dutch door latch and lateral safety central locking system according to UVV Safety central locking system extended to 2,000 mm Door latch with container door opening aid and hockey lock Additional opening handle on the left door leaf ? All-around tarpaulin and net hooks ? Container primed once on the inside, primed twice on the outside and painted twice in a single color on the outside ? UVV stickers with safety instructions ? Container inspected and approved according to DGUV Rule 214-017 (formerly BGR 186) ? Container inspection book (digitized) for documenting the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Crjdpfxjzq Iu Ue Am Aef Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection when the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° all hydraulic cylinders are double-acting piston rods are hard-chrome plated double knee joint system with PROLINK (over-extension of the knuckle arm up to 15°) electronic overload shut-off device with FX500 6 functions RCH or RCS radio remote control (linear levers) with display and XP system emergency shut-off and optical alarm (90% and 100%) including digital slewing limitation, adjustable FASSI stability control FSC incl. LMB II pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable on one side separate hydraulic tank (90 l) with filter, mounted on the crane base extendable on both sides, support width 4.60 m, hydraulic support ? CE, incl. M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black load hook and attachment brackets (short / 500 mm) Transport position: folded across the direction of travel Dead point above the support beam Note: Observe on-board voltage / 12V or 24V, standard 24V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work spotlight on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose lines / eactive Slewing valve, only for cranes with rack and pinion Quick-action valve for the outriggers Additional cos

Condition: new, loading space length: 5,300 mm, loading space width: 2,420 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in a platform design with aluminum sideboards and a permanently mounted Fassi loading crane Cedpfx Amszq Iu Ie Asrf ELLERMANN roll-off container according to DIN 30722-1 with aluminum sideboards and crane platform Platform tipper body type K 33 s Internal dimensions: approx. 6.5/5.3 x 2.42 x 1.0 meters, all dimensions are approximate Useful volume: approx. 13 m³ Paint finish: in RAL color according to customer's request ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outside rollers and subframe made of INP 180 Outside rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support reinforced with 10 mm gusset plates ? Crane platform 20 mm thick at the end, length approx. 1,200 mm Reinforcement on the end wall support and subframe inside Additional stiffening on the end support ? End wall inner height approx. 1,000 mm ? Floor made of 5 mm St 37.2 (S235JR) ? Floor spar spacing 500 mm Spar profile U 80 x 50 mm ? Outer profile as a hole strip (a hole Ø 40 mm every 200 mm), Loadable with 500 kg / hole, max 5 tons per side, operable from the inside ? Aluminum sideboards, approx. 1.0 meter high, foldable and removable, 1 x divided in the middle by a removable center post ? Aluminum rear flap, foldable and removable (cannot be driven over) with removable corner posts ? All-around tarpaulin and net hooks ? Container double primed inside and out and double painted in a single color inside and out ? Aluminum sideboards unpainted ? UVV stickers with safety instructions ? Container tested and approved according to DGUV rule 214-017 (formerly BGR 186) ? Container test book (digitized) for documentation of the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection once the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° All hydraulic cylinders are double-acting Piston rods are hard chrome-plated Double lever system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload protection device with FX500 6 functions RCH or RCS radio remote control (linear levers) with Display and XP system Emergency stop, as well as optical alarm (90% and 100%) Including digitally adjustable slewing limit FASSI stability control FSC including LMB II Pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable from one side Separate hydraulic tank (90 l) with filter, mounted on the crane base Extendable on both sides, support width 4.60 m, hydraulic support - CE, including M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black Load hook and attachment bridges (short / 500 mm) Driving position: folded transversely to the direction of travel Dead point above the support beam Caution: Note the on-board voltage / 12 V or 24 V, standard 24 V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work light on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose guides / eactive Slewing valve, only for cranes with rack and pinion Quick-release valve for the extensions E

Condition: used, mileage: 277,500 km, power: 315 kW (428.28 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 17,630 kg, maximum load weight: 8,370 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, next inspection (TÜV): 04/2027, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space length: 6,300 mm, loading space width: 2,480 mm, loading space height: 1 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Box body, 1 comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, differential lock, fog lights, work lights, rotating beacon, storage compartment, leaf-air suspension, trailer coupling with air and electrical connections, aluminum tank, rear axle can be lifted, lashing eyes, container locking, underbody protection, side aluminum fender, roof hatch, crane behind cab, emergency stop, foldable, 4-point hydraulic support, remote control, 5 hydraulic outriggers, green environmental badge. Wheelbase: 4900 mm, Body: flatbed body with TwistLock locking system & crane Fassi F455A.2.25 with 4-point support & remote control, 9t front axle, rear axle hypoid 440 ring gear 13t, 7.5t trailing axle with lift and load reduction, electronic braking system with ABS and ASR, disc brakes on front and rear axles, condensate monitoring for compressed air system, stabilizer front axle, front underrun protection made of aluminum, waste heat recovery, hot water auxiliary heater, hill start assist, parameterizable special module (PSM), ClassicSpace, reversing warning, comfort central locking system, economy driving program, Mercedes PowerShift 3, pre-equipment for toll collection, tank capacity: 390l, High Performance Engine Brake, transmission oil cooler, transmission lock for auxiliary drive, ESP, lane keeping assist, attention assist, Active Brake Assist, auxiliary drive MB 124-10c MPA N-/M-speed! Load chart: 2.8m-13500kg, 3.8m-9500kg, 4.4m-9085kg, 6.25m-6270kg, 8.2m-4650kg, 10.2m-3655kg, 12.2m-3010kg, 14.4m-2465kg! UVV valid until 08/2026! Loading height approx. 1180mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Crsdpfezfqqujx Am Ajf

Condition: new, power: 290 kW (394.29 HP), fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,900 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Equipment: ABS, additional headlights, cabin, central locking, crane, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, company-owned vehicle, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, rotating beacon, leaf suspension, tow coupling (air, electric, hydraulic), aluminum tank, alloy wheels, lashing eyes, underrun protection, pendulum flaps, roof hatch, crane mounted behind cab, emergency stop, grab control, foldable, 2-point hydraulic support, radio remote control, four hydraulic extensions, green emissions sticker. Wheelbase: 3900 mm. Body: Meiller three-way tipper body with aluminum sideboards, pneumatic claw lock on rear wall, & Fassi F135AC.0.24 crane with radio remote control. 8t front axle, 13.4t rear axle with 300 planetary gear, electronic brake system with ABS and ASR (ABS can be deactivated), disc brakes on front and rear axle, condensate monitoring for compressed air system, electronic parking brake, stabilizer on front and rear axle, residual heat utilization, construction site filter, additional thermal insulation, light and rain sensor, comfort locking system, high-performance engine brake, Mercedes PowerShift 3, offroad driving program, PowerShift Advanced, multimedia cockpit, LED daytime running lights, MB 131-2c PTO pump, Meiller 7-piston pump type 270/63, comfort locking system, belt monitoring, PSM 2nd generation, protection package, pre-installation for toll detection, protective plate under tank, transmission oil cooling, lashing pockets in tipper floor, tipper floor 5mm thick, aluminum sideboards, steel front wall. Loading height approx. 1480 mm! Space between cab and tipper body approx. 1000 mm! Load diagram: 2.15m–5460kg, 3.5m–3250kg, 4.55m–2510kg, 6.45m–1590kg, 8.45m–1250kg, 10.50m–990kg. Crodsxn Auqjpfx Am Aef On request and at extra cost, can also be supplied with a different crane, e.g. Fassi F195 for a surcharge of EUR 10,000. THE 1ST AND 2ND PICTURES ARE SAMPLE PHOTOS ONLY! Brand new vehicle from stock with day registration on 24.11.2025! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 331,033 km, power: 335 kW (455.47 HP), first registration: 04/2006, fuel type: diesel, empty load weight: 11,320 kg, maximum load weight: 14,680 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,900 mm, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, loading space length: 3,250 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, crane, cruise control, differential lock, fog lights, low noise, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, Lg. house, 2x comfort seat, 2x couch, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, electric roof, parking heater, air horn, switch 16, ABS (anti-lock braking system), constant throttle, power take-off, differential lock, fog lights, work lights, rotating beacon, storage box, leaf suspension, tarpaulin and bows, trailer hitch air-light-hydr, Low-noise G1, aluminum side guard, crane behind house, emergency stop, foldable, 4-point hydraulic outriggers, radio remote control, 6x hydr. extensions, green environmental sticker Wheelbase: 3900 mm Body: Flatbed body with tarpaulin & rear crane Fassi F420AXP.26 with radio control (remote control) Rotzler 120kN winch. Euro 3 engine with retrofitted particulate filter! 9t front axle, rear axle H7 13t disk wheel 300, Telligent brake system with ABS, ABS can be switched off, drum brake on front and rear axle, steel bumper, electric pop-up roof, PSM, pre-installation for toll collection, distributor cockpit, WSK clutch, Webasto Air Top 2000 auxiliary hot air heater, construction site filter, increased engine cooling capacity, MB 2c countershaft power take-off, 600 Nm rear engine output, transmission oil cooling, register shunting clutch with front air and hydraulic connections. Crodpfxovhnm Ns Am Ajf Load diagram: 2.95m-12000kg, 4.6m-8000kg, 6.45m-5500kg, 8.35m-4075kg, 10.35m-3150kg, 12.40m-2450kg, 14.6m-1970kg, 16.80m-1650kg! 160t gross vehicle weight! 134t towing capacity! Actual 40 AHK! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 134,899 km, power: 134 kW (182.19 HP), first registration: 12/2005, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Equipment: all wheel drive, crane, Wheelbase: 3.69 m Crodpfx Aezpddcsm Aof

Condition: used, mileage: 380,250 km, power: 353 kW (479.95 HP), first registration: 02/2008, fuel type: diesel, empty load weight: 13,340 kg, maximum load weight: 12,660 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, brakes: constant throttle, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, at the company site, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 16-speed manual gearbox, ABS (anti-lock braking system), ASR (traction control), constant throttle, power take-off, differential lock, fog lights, work lights, rotating beacon, storage box, leaf and air suspension, rearmost axle liftable and steerable, trailer coupling with air and light connections, aluminum tank, low-noise G1 specification, underrun protection, side aluminum side guard, roof hatch, crane mounted behind cab, emergency stop, grab control system, foldable, 2-point hydraulic support, radio remote control, 2x hydraulic extensions, green environmental sticker. Crodpfx Amoznldbs Aof Wheelbase: 4500 mm Structure: 18t VDL roll-off system S18-5700 for containers up to 6.5m (extendable underrun protection) & Fassi F130A.22 crane with remote control (radio control) MAN HydroDrive, ZF 16 S 252 transmission! Load diagram: 2.2m-5580kg, 4.3m-2845kg, 6.1m-1970kg, 8m-1490kg! Spare wheel available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, mileage: 400 km, power: 367 kW (498.98 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Tatra Phoenix 6x6x6 all-wheel drive with Fassi crane with jib and winch New vehicle with daily registration 07/2024 Long-haulage cab Removable flatbed Can be used as a tractor unit Tatra specifications coming soon Crane: Codpfx Aexmn Itsm Asrf Fassi F545RA2.27 Stability control V7 remote control Jib / auxiliary boom L214, 4-way V20 winch with 60 m cable AWC Front outriggers 5-way outriggers etc. Further information coming soon.

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, crane, navigation system, parking heater, soot filter, MAN 35.520 tractor unit with removable flatbed and crane * Hydrodrive * 3-axle steered * Removable flatbed, including stake pockets and container lock * Movable fifth wheel coupling * Long-haul cab * Air suspension * Trailer coupling * Fassi F800 RA2.28 crane from 2007, completely overhauled * UVV (German accident prevention regulations) * 8-way extension Cedpfx Amewd Apps Ajrf * 360° front outriggers - 100% * Without outrigger monitoring * Cable winch preparation, delivery with cable winch available upon request (+13,000.00 €) * Storage box * etc. * Further information and the complete equipment are available upon request

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, crane, navigation system, parking heater, soot filter, MAN 35.520 tractor unit with removable flatbed and crane * Hydrodrive * 3-axle steered * Removable flatbed, including stake pockets and container lock * Movable fifth wheel coupling * Long-haul cab Cedewd Apiopfx Am Asrf * Air suspension * Trailer coupling * Fassi F800 RA2.28 crane from 2007, completely overhauled * UVV (German accident prevention regulations) * 8-way extension * 360° front outriggers - 100% * Without outrigger monitoring * Cable winch preparation, delivery with cable winch available upon request (+13,000.00 €) * Storage box * etc. * Further information and the complete equipment are available upon request

Condition: used, functionality: fully functional, mileage: 136,239 km, first registration: 03/2021, fuel type: diesel, empty load weight: 18,500 kg, maximum load weight: 13,500 kg, overall weight: 32,000 kg, axle configuration: 8x2, wheelbase: 4,800 mm, fuel: diesel, fuel tank capacity: 500 l, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel-air, number of seats: 2, total length: 9,535 mm, total width: 2,550 mm, loading space length: 5,930 mm, loading space width: 2,480 mm, Equipment: ABS, air conditioning, crane, MAN 35.470 TGS 3-sided tipper (internal dimensions: 5.93m long / 2.48m wide / 0.60m high) FASSI F485RAC.2.25XE-Dynamic crane with 5 hydraulic outriggers and 4 supports 8x2 Crodpfxozq Dh Dj Am Aof front suspension with leaf springs - rear suspension with air springs differential lock automatic transmission Euro 6D GVW 32,000 kg - payload 13,500 kg overall truck length 9.53m wheelbase 4.80m tires with 50% tread remaining ABS air conditioning air-suspended driver's seat sun visor fog lights central locking electric windows and exterior mirrors

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x6, wheelbase: 4,200 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 5,800 mm, loading space width: 2,480 mm, loading space height: 800 mm, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power mirror, retarder, seat heater, soot filter, trailer coupling, - All-wheel drive - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock - High beam headlights - Speed limiter - Catalytic converter - Automatic climate control - Refrigerator - LED lighting - Air suspension - Air-suspended seats - Air horn - Particle filter - Radio/Multimedia system - Rear view camera - Sunroof - Sleeper cab - Seat heating - Sun visor - Stability control - Auxiliary heater - Automatic heating system - Toolbox Internal number for customer inquiries: 4-093 MAN TGS 33.520 6x6 BL with wheelbase 4,200 mm !!! ALL-WHEEL DRIVE !!! !! IMMEDIATELY AVAILABLE IN STOCK !! As a special flatbed truck with a Fassi F235 loading crane. !!! Crane exchange to F235 6-section boom or F255 with 4 or 6 sections possible for an extra charge. Crsdpfxozikzue Am Ajf EURO 6E !! Cab TM: the comfortable one (narrow, long, medium height) * All-wheel drive 6x6 * Suspension type: leaf/air (BL) * 4,200 mm main wheelbase, 1,400 mm wheelbase between rear axles * Diesel engine MAN D2676 LF78, 520 hp, 2,600 Nm torque, Euro 6e * Automatic transmission MAN TipMatic 12.28 OD, with Retarder 35 * Retarder Eco, speed-dependent, adjustable, energy-efficient * High-performance engine brake MAN EVBec, adjustable * Differential locks front, rear, center of the driven rear axles * Trailer coupling ROCKINGER Type 500 G 6A (or 40 on request) * Control panel MAN EasyControl, 4 functions, operable from the outside when the door is open * Driver's comfort seat, air-sprung, with lumbar support, shoulder adjustment and seat heating * Multifunction steering wheel, leather, adjustable in height and tilt * Bunk, lower, with slatted frame and head adjustment * Sunblind, front windshield, inside, electric * Refrigerator, pull-out, and drawer * Infotainment control MAN SmartSelect with touchpad and direct entry * MAN Media System Navigation Professional 12.3 inches * MAN Sound System Advanced with subwoofer * Smartphone integration Superstructure: Flatbed with dimensions 5800 x 2480 x 800 mm Side walls 1x split (2 flaps) per side, with side wall release The floor plate is standard made of laminated, Finnish multi-layer wood with a thickness of 30 mm and is screwed to the outer frame and cross members, which are perforated at an angle of 45°. Tie-down rail recessed in the middle in the direction of travel 4 work lights 2 stainless steel toolboxes, each one to the right and left after the 3rd axle Fassi F235 loading crane: * F235A.2.4 e-dynamic 4-section boom * Load capacity at 12.7 m still 1,345 kg * Swivel range 400° * Double knuckle system with PROL1NK (overextending knuckle arm up to 15°) * Electronic overload cut-off device with FX500 * Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) (Alternatively, linear control system in stock) * Emergency shut-off, as well as optical alarm (90% and 100%) including adjustable digital swivel limit * FASSI stability control FSC incl. LMB II * Control system for 2 additional functions with »2 hose guides for e.g. gripper or tongs (5th & 6th control circuit) * Manual extensions for 5th and 6th section possible for an extra charge Financing is possible with our financing partners. ...

Condition: new, power: 324 kW (440.52 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Year of construction: 2025, Equipment: ABS, AdBlue, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, power mirror, seat heater, soot filter, trailer coupling, - Aluminum fuel tank - Rear work lights - Heated exterior mirrors - Heated mirrors - Passenger seat - Bluetooth - High beam - Catalytic converter - Refrigerator - Air suspension - Air-suspended seats - Particulate filter - PTO (Power Take-Off) - Radio/multimedia system - Beacon light - Reversing camera - Disc brakes - Sliding roof - Seat heating - Sun visor - Lane departure warning system - Stability control - Toolbox - Additional steering axle Internal number for customer inquiries: 5-052 / Immediately available!!! MAN TGS 26.440 6x2H-4 BL 3-way tipper with FASSI F195A.2.24 E-DYNAMIC loading crane Loading crane: - FASSI F195A.2.24 e-dynamic - Lifting moment 162 kNm (16.51 mt) - Four hydraulic extensions, outreach 12.7 m - e-dynamic hose equipment for 2 auxiliary devices - Slewing range 400° - Double linkage system with PROLINK (overbending articulating arm up to 15°) - Electronic overload protection with FX 500 - FASSI Stability Control FSC incl. LMB II - Fassi RCS Radio maxi - 6 functions with 3 joysticks (2-2-2) - Special stabilizer legs, support width 6.64 m, hydraulically extendable incl. FSC - Outriggers operable via remote control - FL system (Full Lift), selectable speed-up valve for telescopic extensions - LED work lights Vehicle: - MAN D2676 LFAJ diesel engine, 324 kW (440 hp) output, 2,200 Nm torque, Euro 6e - MAN TipMatic 12.24 OD automatic transmission - 6x2H-4 MAN HydroDrive, hydrostatic front axle drive - Wheelbase 3,600 + 1,350 mm - Leaf/air suspension - RINGFEDER 40mm trailer hitch type 4040/G150A (optional at extra cost ø50mm) - 2-line trailer brake connection, DuoMatic coupling - 390 l fuel tank capacity, 60 l AdBlue tank - High-performance engine brake MAN Turbo EVBec, multi-stage - Differential lock on driven rear axle - Trailing axle, 9,000 kg, non-driven, straight, steered, liftable - Prepped for 2 cameras, one camera linked to reverse gear - Driver's cab NN: the Practical (narrow, medium length, standard height) - Komfort driver's seat, air-suspended, with lumbar support, shoulder adjustment, and seat heating - Electrically operated sunblind for front windscreen (inside) - Coolbox - MAN EasyControl operating panel, 4 functions, operable from outside with door open - MAN Media System Navigation Professional 12.3 inch - MAN Advanced Sound System Body: Three-way tipper body with crane mounted directly behind the cab Flatbed: - Dimensions LxWxH 4,800 mm x 2,420 mm x 800 mm - (Optional available: cargo area length 5,200 mm x 2,420 mm x 800mm) - Front wall height 1,000 mm Special equipment: - Fixed rear corner stanchions - Side wall lifting aids - Eight recessed lashing rings left and right in the floor (4 per side) - Hydraulic system for crane/tipper/trailer switchable via valve in the cab Crodpsylx Hlsfx Am Asf - Positioning of underrun protection, rear lights and supply lines on the left side - Central locking for lower locks, pneumatically controlled from the cab - 2-circuit trailer tipper hydraulics Financing / hire-purchase as well as leasing / partial amortization leasing possible with our...

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatic - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front support approx. 14,000 KG Flatbed body with side boards 6200x2550x600 mm Footsteps Diamond plate floor Removable side boards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x Outrigger pockets 6 x Lashing eyes 6500daN Toolboxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile with lashing eyes 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outrigger system, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-over wireless remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, tiltable sheave, quick coupler between main boom and fly jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extending knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS wireless remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping Sep. hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger span 10.00m, Outriggers can be operated via wireless remote control Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Observe the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S wireless maxi - 8 linear levers Proportional control block for outriggers 180° hydraulically extendable support legs / on both sides Preparation for operation with variable pump (LS) Control system for 2 additional functions with 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct for Jib mounted for 2 functions Control system for additional function rope winch Rope winch type V20 - 2,000daN, 60m rope (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane Automatic rope winch control AWC - (Automatic winch Control) for JIB Automatic rope winch control Work lights can be operated via display or wireless remote control 1 LED work light mounted on the knuckle arm Crodpfx Aszcr N Iom Asf 1 LED work light mounted on the Jib LED for 2 support legs, not mounted (crane) LED for 2 support legs, not mounted (additional support struts) Electric rotary distributor with 14 slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB "L42""" Additio

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Superstructure: flatbed with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings up to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Tool boxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on the display Cjdpfx Amezcr N Ue Aorf Danfoss D900 control unit with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable by radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support frame) Electrical rotary distributor with 14 » sliding contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional cost for Dinitrol application (

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Csdpfx Amszcr Nze Aorf Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Step plates Diamond plate flooring Removable sideboards 9 x LED lights Overwidth markings extendable to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20 ft container locking mechanism Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), complete accessories for winch operation, pivoting roller, quick coupling between main boom and fly jib and more... TECHNO SERIES!! NEW crane model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extendable knuckle arm up to 10°) Electronic overload cut-out device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter is supplied pre-assembled Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically pivotable support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose lines / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » mounted for Jib for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 support legs, not mounted » (Crane) LED for 2 support legs, not mounted » (Additional support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional price for Dinitrol applicat

Condition: used, mileage: 269,400 km, power: 353 kW (479.95 HP), first registration: 03/2009, fuel type: diesel, empty load weight: 16,285 kg, maximum load weight: 9,715 kg, overall weight: 26,000 kg, axle configuration: 4x4, wheelbase: 4,300 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, loading space length: 5,600 mm, loading space height: 700 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, onboard computer, trailer coupling, MAN TGS 26.480 6X4H-2 BL Flatbed Truck with Heavy-duty Crane First registration: 03/2009 Only 269,400 km with documentation Short cab Manual transmission Air conditioning Trailer hitch 6X4 Hydrodrive Rear axle with air suspension Third axle steering and liftable Tyres: 385/65 R22.5 approx. 60% tread Tyres: 315/80 R22.5 approx. 60% tread Wheelbase: 4,300 mm Platform length: 5,600 mm Drop sides: 700 mm Loading height: 1,150 mm Curb weight: 16,285 kg Crane: Fassi F310AXP.25 Credpfxeyu Snhs Am Aef Radio remote control Cable winch 5th and 6th hydraulic circuits for additional attachments 4-point stabilizers 5 hydraulic extensions 2.75 m / 9,000 kg 4.60 m / 6,225 kg 6.45 m / 4,245 kg 8.40 m / 3,115 kg 10.40 m / 2,425 kg 12.40 m / 1,990 kg 14.60 m / 1,640 kg Hook height approx. 18.50 meters German vehicle from first owner, well-maintained condition. Export / net price: €73,900 All information without guarantee, subject to errors.

Condition: used, mileage: 30,800 km, power: 309 kW (420.12 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 12,420 kg, maximum load weight: 5,580 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,200 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Scania R420 4x2 flatbed truck with crane Registration date: 08/2012 Only 30,800 km, with proof of mileage!!! Engine operating hours: 1,632!!! CR19 long cab with a sleeper berth Euro 5 emission class Manual transmission Trailer coupling Air conditioning, auxiliary heater Wheelbase 5300mm Full air suspension Tires 295/60 R22.5, tread approximately 60% Flatbed: 6200mm Side boards: 600mm Loading height from the ground to the top edge of the flatbed: 1100mm Unladen weight: 12,420 kg Crane: Fassi F135A.2.26 E-Dynamic Radio remote control Winch 7 extensions in total 6 hydraulic extensions + 1 mechanical extension 2.50m / 3800kg 4.75m / 2435kg 6.60m / 1530kg 8.55m / 1025kg 10.60m / 725kg 12.70m / 540kg 14.85m / 435kg 16.95m / 365kg 19.15m / 275kg (mechanical extension) Hook height approx. 23 meters Crodpeyymy Rjfx Am Asf The vehicle is from the first owner and is in good condition. Valid TÜV (technical inspection) until April 2027. Export/net price: 59,900 Euro All information is without guarantee, subject to change.

Condition: used, mileage: 30,800 km, power: 309 kW (420.12 HP), first registration: 08/2012, fuel type: diesel, empty load weight: 12,420 kg, maximum load weight: 5,580 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, loading space length: 6,200 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Scania R420 4x2 flatbed truck with crane First registered: 08/2012 Only 30,800 km, with documentation!!! Engine operating hours: 1,632!!! CR19 long cab with a sleeper berth Euro 5 emission standard Manual transmission Trailer coupling Air conditioning, auxiliary heater Wheelbase 5300mm Cjdpfeyymy Dsx Am Asrf Full air suspension Tires 295/60 R22.5, tread depth approx. 60% Flatbed length 6200mm Side boards 600mm Loading height from the ground to the top edge of the flatbed: 1100mm Unladen weight 12,420 kg Crane: Fassi F135A.2.26 E-Dynamic Radio remote control Winch 7 total outrigger extensions 6 hydraulic extensions + 1 mechanical extension 2.50m / 3800kg 4.75m / 2435kg 6.60m / 1530kg 8.55m / 1025kg 10.60m / 725kg 12.70m / 540kg 14.85m / 435kg 16.95m / 365kg 19.15m / 275kg (mechanical extension) Hook height approx. 23 meters The vehicle is from a single owner and is in well-maintained condition. Valid TÜV (technical inspection) until April 2027. Export/net price: €59,900 All information without guarantee, subject to errors.

Condition: used, mileage: 269,400 km, power: 353 kW (479.95 HP), first registration: 03/2009, fuel type: diesel, empty load weight: 16,285 kg, maximum load weight: 9,715 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,300 mm, fuel: diesel, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, loading space length: 5,600 mm, loading space height: 700 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, onboard computer, trailer coupling, MAN TGS 26.480 6X4H-2 BL Flatbed with Heavy-Duty Crane First registration: 03/2009 Only 269,400 km with documentation Short cab Manual transmission Air conditioning Trailer coupling 6x4 Hydrodrive Rear axle with air suspension 3rd axle is steered and liftable Tyres: 385/65 R22.5 with approx. 60% tread Tyres: 315/80 R22.5 with approx. 60% tread Wheelbase: 4,300 mm Platform length: 5,600 mm Side walls: 700 mm Loading height: 1,150 mm Unladen weight: 16,285 kg Crane: Fassi F310AXP.25 Radio remote control Winch 5th + 6th hydraulic circuits for additional attachments 4-point stabilizers 5 hydraulic extensions 2.75 m / 9,000 kg 4.60 m / 6,225 kg 6.45 m / 4,245 kg 8.40 m / 3,115 kg 10.40 m / 2,425 kg 12.40 m / 1,990 kg 14.60 m / 1,640 kg Hook height approx. 18.50 meters Cjdpfsyu Snbox Am Aorf German vehicle from first owner, well-maintained condition. Export / net price: 73,900 EUR All details without guarantee, subject to errors and prior sale.

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate Credpen Hrtgsfx Am Aof with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Lighting system 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Surface protection Steel construction: blasted and primed Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminum Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-Axle Step Frame Semi-Trailer in extendable version with Fassi Crane F545RA.2.26 Mega Lowliner as step frame semi-trailer. Cedpjyihgyofx Am Asrf Chassis Welded construction with cross members, made entirely from high-quality steel Neck construction reinforced for front-mounted crane Axles 2 BPW axles, each with 10,000 kg load capacity, 17.5" drum brakes ABS: 1 axle sensor-controlled Axle spacing: 1,810 mm Both axles equipped with forced steering Tyres 8x type 235/75 R17.5 Rims Aluminum rims, 10-hole, hub-centric, ET=122 mm offset Lighting system 24V lighting system compliant with EU Directives 76/756/EWG and following, with: 2x2 three-chamber LED taillights 1x LED reversing light 1x LED fog light LED side marker lights Lane keeping lamps License plate illumination 2x 7-pin sockets + 1x 15-pin socket wired according to EU standard Floor Anti-slip birch plywood flooring Steel checker plate above axle area Load securing Outer frame with lashing hole profile D030 mm on inclined edge 2x12 lashing points 8,000 daN in outer frame 3x rows of combination pin stake pockets for 80x80 mm stakes in the low bed Accessories 2x wheel chocks with holders Spare wheel holder with winch 2x storage boxes with sliding compartment (for chain storage), etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional outrigger beams 360° working area Approx. 100% outreach forward The attached images are sample images. We manufacture crane semi-trailers in various versions. For further information, we are at your disposal. Upon request, we will provide you with a customised quotation tailored to your equipment requirements.

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Credet Izpyspfx Am Ajf Lighting system 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Surface protection Steel construction: blasted and primed Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminum Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 1,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 3-axle semi-trailer in platform design with Fassi F545RA.2.26 crane Chassis Welded construction with cross members, made entirely of high-quality steel Neck construction reinforced for front-mounted crane Axles Csdeyihg Tepfx Am Asrf 3 BPW axles, each with a 9,000 kg load capacity, equipped with disc brakes ABS: 1 axle with sensor Axle spacing: 1,310 mm / 1,420 mm 3rd axle is a trailing steering axle (optionally available with forced steering) Tyres 6 x 385/65 R22.5, mounted on steel rims Lighting system 24V lighting system according to EU regulations 76/756/EEC ff., featuring: 2x2 three-chamber LED rear lights 1x LED reversing light 1x LED fog lamp LED side marker lights Lane marker lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket, wired according to EU standard Floor Phenolic plywood flooring Steel chequer plate above the axle area Load securing Outer frame with D030 mm lashing hole profile in the inclined edge 2x12 lashing points, 8,000 daN on the outer frame 3 rows of combi stake pockets for 80x80 mm plug-in stakes in the lowered bed area Accessories 2x wheel chocks with bracket Spare wheel bracket with winch 2x storage boxes with drawers (for chain storage) etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional stabilizer support 360° working range approx. 100% outreach to the front The attached images are sample images. We manufacture crane semi-trailers in a variety of versions. For further information, please do not hesitate to contact us. Upon request, we will be happy to provide a customised quotation based on your required specifications.

Condition: used, mileage: 212,700 km, power: 294 kW (399.73 HP), first registration: 12/2008, fuel type: diesel, empty load weight: 14,450 kg, maximum load weight: 11,550 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, fuel: diesel, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, loading space length: 4,600 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, cruise control, differential lock, low noise, onboard computer, soot filter, trailer coupling, MAN TGS 26.400 6x4H-2 BL, flatbed/tipper truck with crane First registered: 12/2008 Only 212,700 km, documented Long cab Manual transmission Air conditioning 2x trailer hitch Credpeza E Eqjfx Am Ajf 6x4 Hydrodrive Rear axle with air suspension 3rd axle, steerable and liftable Tires 385/65 R22.5, tread approx. 60% Tires 315/80 R22.5, tread approx. 60% Wheelbase 3900mm Flatbed/tipper body 4600mm Side boards 600mm Unladen weight 14,450 kg Crane: Fassi F235AXP + JIB L213 + winch + work platform Radio remote control Winch Including work platform 4-point outrigger system Main crane, 4 hydraulic extensions 2.60m / 6150 kg 4.45m / 4325 kg 6.45m / 2885 kg 8.45m / 2100 kg 10.60m / 1630 kg 12.70m / 1345 kg Hook height approx. 16.50 meters + Fly Jib L213, 3 hydraulic extensions 14.50m / 685 kg 15.40m / 535 kg 17.10m / 445 kg 18.90m / 380 kg 20.85m / 335 kg Hook height approx. 25 meters The vehicle is from a single owner. The technical inspection is valid until December 2026. Export/net price: 65,900 Euros All information is subject to change without notice. Errors and omissions excepted.