Condition: like new (used), Martin Quick-Clamping Nut for 40mm Milling Arbor. From stock, apparently has never been used. Hnodpfx Alownnauj Top The quick-clamping nut is used for the T27. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: like new (used), 40mm Milling Arbor for Martin Tilting Spindle Moulder T27 Hnjdpfxownm U Ro Al Tep Clamping length 160mm, arbor diameter 40mm. With quick-clamping nut. From stock, apparently has never been used. Milling arbor is only suitable for T27, not for T26. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this supplier.'

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Hnedpfew Enw Isx Al Top

Condition: new, Year of construction: 2025, Construction staircase, suitable for use on any construction site. 2 units available in stock. Can be assembled by one person in 15 minutes. Two staircases can be mounted on top of each other. Half-turn staircase, left + right. Hnsdpfx Aezhhl Isl Tsp A complete staircase can be stored on a Euro pallet.

Condition: reconditioned (used), Number of milling spindles 2 St. fence ja ja /nein workpiece ja STEGHERR Cross-bar Milling Machine, Type KSF-mini ----- Specialized milling machine for the efficient production of intersecting muntin bar joints. The KSF-mini muntin bar milling machine embodies STEGHERR's extensive experience in manufacturing specialized milling equipment for intersecting muntin joints. The KSF-mini enables the rapid and precise production of all standard intersecting muntin joints encountered in practice. Muntin bars that have already been profiled can also be processed on the KSF-mini. Precise milling is achieved because the workpiece is machined on three sides in a single clamping operation. The tools are driven by two three-phase motors; workpiece clamping is pneumatic. The profile cutter is designed to match the web width. The saw blades that perform the lap-joint cut can be adjusted to the profile cutter's dimensions using spacer rings. The machine is designed for a maximum workpiece cross-section of 56 x 46 mm. - Motor: 2.2 kW, 380 V, 50 Hz Hnedpfx Ajzip Nwsl Tjp - Pneumatic pressure: 6 bar Includes: ----- - Machine stand - Foot pedal control - NEW ORIGINAL stop rail with scale and sliding stop featuring an optical setting aid, as shown in the photos. Tools as shown in the photos: 1 Profile cutter 3 Saw blades (corresponding to a web width of 10 mm) Footprint approx. L x W x H: 1,330 x 570 x 1,430 mm Weight: approx. 150 kg ----- (All technical specifications provided by the manufacturer; no liability assumed!)

Condition: reconditioned (used), functionality: fully functional, 4 speeds: 3000/6000/4500/9000 rpm. Clockwise/counterclockwise rotation. Spindle lock via foot pedal. Milling stop with fine adjustment. Spindle diameter: 30 mm. Dust extraction at the top and bottom, each 120 mm. Spindle wrench. Open-end wrench, 41 mm. Cable + plug, 16 amps. Hsdpoittnzsfx Al Tonp

Condition: not inspected (used), Power connection 380V 5.5kW, right/left rotation, two electronically controlled speeds, spindle diameter 30 mm, spindle height adjustment via handwheel 180 mm, spindle not tiltable, 6 speeds: 3000/4000/5000/6000/8000/10000 rpm, dimensions (W x D x H): 1200 x 1200 x 1100 mm, weight approx. 1000 kg, complete with tenoning device / sliding table Hsdoxqp Ngopfx Al Tonp

Condition: reconditioned (used), Year of construction: 2000, machine/vehicle number: KK052469, functionality: fully functional, Connection value: 380V, 4kW Table size: 1070 x 620 mm Swivels with hand crank, 45° Height adjustment with hand crank Right/left rotation Motor brake Socket for feed device Protective covers for handheld routers Spindle diameter: 30 mm Aigner stop Dust extraction connection: 2x 120 mm Hnodpfxeiinm He Al Top Speeds: 1400/3500/6000/8000 RPM Operating manual

Condition: used, Stehle milling machine from company liquidation, as shown in the pictures, fully functional. Hjdpfxey Nzmqj Al Tenp

Condition: used, Cross-cut saw motor 1.8 kW Milling motor top 1.8 kW Milling motor bottom 1.8 kW Hodpoq Auzaofx Al Tjnp Sliding table with Superfix manual clamp Saw blade 2 slitting discs

Condition: reconditioned (used), Year of construction: 1997, Connected load 380V 11kW 30A electric swivel -5° to +45 electric height adjustment digital display clockwise/anticlockwise rotation speeds 3000/4500/6000/9000 rpm Milling fence with siko counter Spindle diameter 30 mm Table size 1350 x 800 mm Control panel on top Extraction connection 2x120 mm Hodpfx Aloub S U Sj Tonp

Condition: used, Year of construction: 2000, machine/vehicle number: 0-260-06-0228, Foot-operated 1200 x 800 mm 80 mm dust extraction port pneumatic connection Cable + plug, 16 A 1 set of operating tools Hodpfxeigadlj Al Tenp 1 set of feeler rollers

Condition: reconditioned (used), machine/vehicle number: 591, functionality: fully functional, Motor power: 4 kW Table size: 800 x 800 mm Spindle diameter: 30 mm Dust extraction port: 120 mm Handwheel for height adjustment Adjustable stop blocks Right/left rotation Spindle speeds: 3/4/6/9000 rpm No brake Hedpfx Aleiw D Uhj Tjnp

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2788, Cut-off saw, diameter 300 mm Milling spindle, diameter 40 mm Sliding table with Festo length stop Dust extraction port for saw, 120 mm Dust extraction port for milling machine, 140 mm Cable + plug, 16 amps Without operating tools Hnedpsiau I Ssfx Al Tjp Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Condition: reconditioned (used), Year of construction: 1966, machine/vehicle number: 662310, functionality: fully functional, Rated power at 380V: 3kW + 4kW Hnjdpfoiw D N Dsx Al Tep Clockwise/counterclockwise rotation Star-delta switch 2800/4500/6000 RPM and 5600/9000/12000 RPM

Condition: reconditioned (used), functionality: fully functional, Power consumption at 380V: 4.5 kW Table size (L x W): 1050 x 950 mm Hsdsiw D Upspfx Al Tenp Dust extraction port diameter: 120 mm Spindle diameter: 30 mm Right/left rotation Electrical switch for two speeds 3 speeds Adjustable fence jaws

Condition: used, 1x Saw, pneumatically adjustable, 2.5 HP Hjdoigabxepfx Al Tonp 1x Dowel milling arbor, 6 HP 1x Groove milling arbor, 6 HP Pneumatic clamping with foot valve Sliding table with stop and extension

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Hnedpfx Aljxbq Ulo Tjp Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: reconditioned (used), Year of construction: 1962, machine/vehicle number: 7867/162, functionality: fully functional, Power connection: 400V, 4.0kW Dust extraction connection: 1x Ø 100 mm, 1x rectangular 300x140 mm Spindle diameter: 30 mm Height adjustable via handwheel Spindle brake via pulley system Spindle locking via detent pin Right/left rotation 2 speeds Spindle not swivellable Hodpfoh Ux Rwex Al Tonp L x W x H: 1060 x 960 x 1100 mm Weight approx. 650 kg Unfortunately, we cannot respond to inquiries that do not include complete contact information.

Condition: not inspected (used), Milling fence with wooden fence cheeks, each 760 mm long 30 mm milling cutter arbor, incomplete Control panel on top Cable with 16 A plug 130 mm dust extraction diameter Table 1000 mm wide, 800 mm deep Motor approx. 4 kW, total power consumption 12.5 amps Belt tension adjustment via handwheel Spindle height adjustment via handwheel Infeed cheeks individually adjustable via handwheel Hnsdsi Atftspfx Al Top

Condition: ready for operation (used), functionality: fully functional, Cutter shaft speed: 30,000 + 4,000 rpm Milling spindle height adjustment range: 135 mm Maximum milling tool diameter: 390 mm Maximum tool clamping height: 225 mm Spindle diameter: 40 mm Milling motor: 5.5 kW Cross-cut saw speed: 3,000 rpm Cross-cut saw height adjustment: 190 mm Max. cutting height of cross-cut saw: 100 mm Max. saw blade diameter: 350 mm Hsdpfxoyync Ts Al Tsnp Cross-cut saw motor: 0.75 kW Saw blade arbor: 30 mm Sliding table travel: 1270 mm Length stop range: 1750 mm Weight approx.: 740 kg

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 7.35 kW (9.99 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, The Format4 profil 45 milling machine is just one of our best-selling machines and offers unique technical solutions. These include the electromechanical MULTI adjustment system for the 250 mm milling fence for parallel guidance and quick adjustment, with a digital display. The electric fine adjustment, which can be activated with the push of a button, provides tenth-of-a-millimeter accuracy, and the milling spindle quick-change system – tool-free changing in just 10 seconds – is just as distinctive a feature of the Format4 profil 45 as the electric milling spindle height adjustment. Maintenance-free and highly precise: the patented pivoting segment guide “Easy-Glide” with a 6-year warranty; 10-year warranty on the anodized aluminum sliding table with precision “X-Roll” guide system. Further technical data: Fence: 1100 mm Milling table opening: 320 mm Extension table: 1100 Milling fence for tool diameter max.: 250 mm Milling spindle quick-change system, standard Mortise and tenon table: 1300 mm Milling spindle control: “Power-Drive” The machine has the following special equipment: 008 10 HP (7.30 kW) S6/40% 010 Star-delta starter 012 Switching contact for controlling a dust extraction system 014 3-phase CEE coupling for additional equipment with delayed activation (absolutely necessary for operating a feed unit) 016 Stepless speed control 1500–10,000 rpm only with 7.30 kW (10 HP) S6/40% (!002) 103 Milling spindle diameter 30 mm, 140 mm usable height above table 121 Milling spindle locking from the outside 125 Safety rulers “Integral” 500 mm 128 Quick clamping for milling fence 164 Mortise and tenon ruler 1100 mm Hjdjzmh Nkopfx Al Tonp 212 Swiveling device for feed

Condition: as good as new (ex-display), functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, spindle diameter: 30 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, overall weight: 450 kg, Standard equipment Milling unit with table opening 230 mm Milling spindle swivel 90°–45° Degree indicator for milling spindle swivel on the swivel handwheel Milling spindle diameter 30 mm Milling fence 230 for tool diameter max. 230 mm Fence rulers 400 mm, anodized aluminum EURO milling guard MULTI adjustment system Mortise and tenon table 1000, anodized Further technical data Milling spindle swivel: 90° - 45° Milling table opening: 230 mm Milling fence: 230 mm Protective device: EURO milling guard Hedpfx Alezmh Ito Tsnp Fence ruler: 400 mm, anodized aluminum Milling spindle useful height: 115 mm Dust extraction connection: 120 mm / 80 mm Working height: 890 mm Direction of rotation: Direction of rotation switch Speed stages: 3,500/6,500/8,000/10,000 rpm Height adjustment: manual Angle adjustment: manual Optional equipment 010 Star-delta starter 14 3-phase CEE coupling 011 Direction of rotation switch 119 Electric height and angle adjustment for milling machine with LED display 103 03 Milling spindle diameter 30 mm, 115 mm useful height above table 131 Format sliding table M, cutting length 1300 mm 159 Extension table 1100 166 Extension table crosscut fence 2600 mm, "X-Roll" system Cost-effective solution for all woodworking businesses and also an ideal addition to CNC-supported manufacturing processes.

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 128955, functionality: unexamined, Martin table saw T22 in working condition, drive makes some noise but is fully operational. T22 - year of manufacture 1983. The machine was rarely used as a backup machine. The machine is being sold as part of the liquidation of our carpentry business. Collection price - delivery possible upon request. The sale is made with exclusion of any warranty for defects. Liability for intent, gross negligence, and for damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. Hodpfsziu Npox Al Tsnp An inspection of the machine is possible by arrangement. A fixed inspection date is scheduled for July 18 or August 1 from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: new, Year of construction: 2022, New machine Hjdpfxew I Upzj Al Tsnp Year of manufacture 2022 Save working time with recallable tools; once set up, the drive unit can be brought back to the preset position with a single movement Mobile and flexible in use; beveling, grooving, flush milling Addition to table and CNC milling machines Table size 520 x 430 mm with fine adjustment #10450 Availability: short-term Storage location: Flörsheim