Milling machine

Ruwi Tischfräse S

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Godpfx Ajw I U E Ashnoud Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: new, Year of construction: 2026, For professional and precise glue supply in dowel holes and back side grooves. Short introduction: • Always the same and right glue amount • No afterwards cleaning of the workpieces of too much glue is necessary • Easiest and minimal cleaning (1x week) of the gluing system (through cleaning program) • Glue cost savings • Ergonomic and light glue gun compared to squeezy glue bottles Gusdpfx Ajdxz Tpjhnsd • Faster and more precise working compared to squeezy glue bottles

Condition: excellent (used), mileage: 289,940 km, power: 427 kW (580.56 HP), first registration: 10/2016, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 6x4, fuel: diesel, brakes: engine braking, color: silver, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 1,500 kg, permissible axle load (axle 3): 10,500 kg, Year of construction: 2016, operating hours: 5,184 h, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, navigation system, parking heater, power mirror, soot filter, trailer coupling, = Additional options and accessories = - Aluminum fuel tank - Power brake booster - High beam headlights - Television - Speed limiter Godpfx Aheyiuntenjud - Refrigerator - Alloy wheels - Air suspension - Media system - Particulate filter - Rearview camera - Sun visor - Auxiliary heater - Toolbox - Power take-off (PTO) - Central lubrication - Towing jaw = Additional information = Axle configuration Brakes: disc brakes Front axle: Tire size: 385/65/22.5; Alloy wheels; Max. axle load: 9,000 kg; Steerable; Suspension: leaf spring Rear axle 1: Tire size: 315/70/22.5; Twin tires; Differential lock; Alloy wheels; Max. axle load: 15,000 kg; Suspension: air suspension Rear axle 2: Tire size: 315/70/22.5; Twin tires; Differential lock; Alloy wheels; Max. axle load: 10,500 kg; Suspension: air suspension Weights Curb weight: 16,850 kg Payload: 12,150 kg Gross vehicle weight: 29,000 kg Functional Mast: telescopic Lifting capacity: 9,715 kg Lifting height: 2,900 cm Crane: EFFER 315/6S + JIB4S, year of manufacture 2016, mounted behind the cab Body manufacturer: EFFER 315/6S + JIB CE marking: yes Condition Technical condition: very good Visual condition: very good SCANIA R580 V8 6X4 TRACTOR UNIT/CRANE TRUCK WITH EFFER 315/6S + JIB4S CRANE EURO 6 L PACKAGE 580 HP DRIVE LA6X4 HA WHEELBASE 350 CM AIR SUSPENSION CR19H SLEEPER CAB WITH AIR CONDITIONING, AUXILIARY HEATER, REFRIGERATOR TV, MEDIA, COFFEE MACHINE 27MC, PHONE REVERSING AND SIDE VIEW CAMERA LEATHER INTERIOR AUTOMATIC TRANSMISSION TRAILER COUPLING SLIDING GEAR MULTIPLE TOOLBOXES EFFER 315/6S + JIB4S CRANE CRANE OPERATING HOURS 5184 6+4 X HYDRAULICALLY EXTENDABLE WINCH A TOTAL OF 5 EXTENSIONS CRANE CAN OPERATE IN FRONT OF THE CAB WITH 1 FRONT EXTENSION RADIO REMOTE CONTROL MAX LIFTING CAPACITY AT 2700 CM: 9715 KG MAX WORKING HEIGHT: 2900 CM REMOVABLE BOX L=350 W=244 FOLLOW US NOW ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU РОЗМОВЛЯЄМО УКРАЇНСЬКОЮ

Condition: used, machine/vehicle number: 007875, Max. panel width: 3800 mm Max. panel length: 2200 mm Main saw blade projection: 130 mm Gjdpfx Ajwkf Axjhneud No of Grippers: 7

Condition: new, Year of construction: 2025, Working width: 408 mm Planer block: Strip knife Number of knives: 3 Planing table length: 1640 mm Planing stop angle adjustable: yes Folding up the planing tables: manual Maximum thickness throughput of the thicknesser: 225 mm Thicknessing table height adjustment: handwheel Gedpowfcqcjfx Ahnsud Planing thickness display: scale Feed speed: 7 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: continuous Table rollers: no Motor power: 3 kW Motor brake: yes, automatic Extraction connection: 100 mm Machine length: 1660 mm Machine width: 870 mm Weight: 260 g

Condition: ready for operation (used), Year of construction: 2002, For sale used Rilesa Unix drilling machine - 4 drilling units top - 4 drilling units rear Gujdou Shx Depfx Ahned - Right and left

Condition: refurbished (used), functionality: fully functional, Panel Dividing System PA 4115 – 3100 x 3100 DNC-AT Condition: Completely overhauled Warranty: 1-year warranty Technical Specifications: Left-angle stop according to AGA 4383 Longitudinal Saw FM 16-3100: - Hardened guides - Automatic forward and return travel of the saw unit - Return travel with automatic lowering - Feed speed: 2–50 m/min (stepless adjustment via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction channels in the machine base and pressure beam - Scoring saw adjustable from outside (without opening the safety hood) - Saw unit with controlled DC drive: - Precise positioning (e.g. for cutouts) - Slowed extraction from the cut - Includes safety hood locking, SZ 5008 lamella curtain Gusdjxhg Ibspfx Ahnod - Offcut device SP 5004 – Offcuts down to at least 5 mm - Main saw motor: 7.0 kW - Scoring saw motor: 1.1 kW (can be switched off separately) - Cutting length: 3100 mm - Cutting height: 70 mm - Dust tested: Threshold of 2 mg/m³ is significantly undercut - CE compliant Angle Pressure Device WP 5003: - With pressure claw for cross cuts - Adjustment range up to 2400 mm - Semi-automatic function Material Feed Table HP 5021 (mounted at rear of FM 16): - Parallel fence with 6 spring-loaded clamping fingers - Direct drive of material pusher via servo motor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard disk Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (also wireless LAN) Optimize cutting plans in the office and send directly to the machine Multitasking capable Printing function via USB Remote maintenance via Internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat screen + multifunctional keyboard Swiveling control panel Graphical representation of cutting plans and work processes Additional Equipment: Angle Stop Table HP 5043 (front mounted): - Machined steel angle, Pertinax table top - Table size: 1800 × 800 mm Workpiece Support Table HP 5025 (front mounted): - Pertinax surface - Table size: 1800 × 800 mm Air Cushion Device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 Circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 Circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Condition: used, Year of construction: 2014, No. 01 Homag Weeke machining center Mod. BMG 111/45/12/K Usable working area with electrospindle 4500 x 1550 mm Usable working area with all units 4500 x 1250 mm Boring head with 12 vertical spindles and 4 + 2 horizontal spindles, saw unit 0/90 Electrospindle 9 kW 12 Hp HSK, rotation speed from 1250 to 24000 rpm 4th axis for aggregate rotation 8-position circular tool changer 8-position lateral tool changer Lateral pick-up tool changer Gjdpfxeyarwto Ahnjud Special FLEX 5 HIGH PERFORMANCE unit for drilling, milling, cutting Automatic tilt adjustment 0 – 100 degrees Chip conveyor discharge to the right 8 Schmalz work tables, 16 suction cups Suction cup positioning laser 2 vacuum pumps POWERTOUCH control system Woodwop dxf import Teleservicenet assistance CE compliant Year 2014

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK SH-30S PRECISA spindle moulder (shaper), available in 400V or 230V versions, is a high-performance and precise woodworking machine designed for professional wood processing in industrial plants, carpentry workshops, and craft studios. Thanks to its stable construction, interchangeable spindle, and wide range of spindle speeds, it ensures top working standards when milling straight components as well as complex shapes. Gedpfxevugf Ds Ahnsud Main Advantages of the Machine Stable cast-iron table construction ensures effective vibration damping and perfectly smooth material feed. Spindle speed range: 1400 / 4000 / 6000 / 9000 rpm enables machining of various wood species and wood-based materials. Reinforced and dynamically balanced spindle guarantees quiet and precise vibration-free operation. Height adjustment with scale allows accurate setting of machining parameters. Comprehensive standard equipment set – tilting fence, holders, and assembly tools included. Complies with all occupational health and safety regulations, DTR documentation, and CE standards – ensuring safe operation and regulatory compliance. Construction and Technology The construction of the CORMAK SH-30S PRECISA spindle moulder is based on a solid high-grade cast-iron body, effectively eliminating unwanted vibrations during operation. The 620 × 510 mm work table is precision-ground to provide even and smooth material sliding. The 2.2 kW motor (400V or 230V version available) ensures sufficient power even during intensive use. With a 100 mm spindle stroke and a maximum clamping height of 105 mm, the machine is highly versatile and suitable for a wide range of milling operations. Precision and Work Efficiency The CORMAK SH-30S PRECISA spindle moulder combines high build quality with functionality. Multi-stage spindle speed adjustment allows optimal parameter selection depending on the type of material and cutter profile. Precision guides and fences enable accurate reference point settings, resulting in repeatability and superior final finish quality. Applications The CORMAK SH-30S PRECISA model is suitable for: Professional carpentry shops and production facilities Furniture workshops and craft studios Production of decorative moldings, grooves, rebates, tenons, and finger joints Edge processing of straight and curved components Standard Equipment Tilting fence 60° left/right Workpiece holder Workpiece fence Anti-slip feet Assembly tools Optional Equipment An interchangeable spindle with ER20 collet chuck allows quick changeovers and adaptation to various tools – price: PLN 700 net. Technical Specifications Motor power (S1): 2.2 kW Voltage: 400 V or 230 V Table dimensions: 620 × 510 mm Table height: 860 mm Dust extraction port: 100 mm Spindle stroke: 100 mm Max. clamping height: 105 mm Table opening: 160 mm Max. tool diameter below table: 150 mm Spindle speed: 1400 / 4000 / 6000 / 9000 rpm Spindle diameter: 30 mm Gross weight: 126 kg Overall dimensions: 640 × 660 × 1250 mm

Condition: used, GRAULE AGT pull and table circular saw Gujdpfx Ahoxf Tr Ujnjd