Used material testing for sale (480)

Condition: used, LDS Crjdpfx Aqozd Umdjvsi Type: SPA56/40K v3 V875 TC LDS shaker with power amplifier and control unit Shaker technical data: Shaker type V 875 Peak force SINUS 35.6 kN (peak) Peak force NOISE 35.6 kN (rms) Peak force SHOCK 106.7 kN Max acceleration SINUS 1078 m/s2 (peak) Max acceleration RANDOM 735.5 m/s2 (rms) Max velocity 1.8 m/s Frequency range excitation direction 0 to 3000 Hz Excitation types horizontal, vertical, arbitrarily pivoted Excitation types: Tests with sinusoidal excitation Tests with noise-based excitation Tests with sinusoidal and noise-based excitation Tests with shock-based excitation (SHOCK): Half-sine shock Sawtooth shock Trapezoidal shock Rectangular shock Simulation or reproduction of a real load profile (Long Time History LTH). A real dynamic time history is used for the test, which was obtained in the test environment. (FFT): Shaker Control Signal Analysis (RANDOM): Random (ROR): Random-on-Random (RSTD): Resonance Search, Track and Dwell (SINEOSC): Sine Oscillator (SOR): Sine-on-Random (SROR): Sine-and-Random-on-Random (SRS): Shock Response Spectrum Synthesis (LTH): Long Time History Data types in signal analysis Possible data types for displaying the TRANSFER FUNCTION [transmibility(f)] Mag dB Mag log Mag Real dB Real Imaginary dB Imaginary Phase UnwrapPhase Real+Imaginery Mag+Phase dB Mag+Phase log Mag+Phase V875 Vibrator 440 mm SPA40K 35.6 kN Dimensions: Approx. 54x90x191cm (amplifier), 115x155x95cm (shaker) Weight: Approx. 650kg (amplifier), 3 tons (shaker) Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, DEWETRON High-End Power Analyzer DEWETRON DEWE3-PA8-RM / DEWE3-RM8 4-Phase Power Analyzer with TRION3-1810M-PA Up to 10 MS/s – modularly expandable 19" measuring system For sale is a professional DEWETRON DEWE3-PA8-RM Power Analyzer in a 19" rack-mount design with a built-in TRION3-1810M-PA power module and the connection and measuring accessories shown in the pictures. This modular measuring system is designed for highly precise power analysis and integration into test benches. Typical applications include electric drives, inverters, energy storage systems, e-mobility, power electronics, as well as research and development test benches. Technical data: System: DEWE3-PA8-RM Chassis type plate: DEWE3-RM8 Revision: 1.1 Design: stationary rack-mount power analyzer TRION(3) slots: 8 Installed power module: TRION3-1810M-PA Current configuration: 4-phase power analysis Measuring channels power module: 4 x voltage / 4 x current Sampling rate: up to 10 MS/s per channel Basic accuracy power analysis: 0.04% High voltage inputs: 4 x U1–U4 Voltage measuring range of the power module family: up to 1000 V RMS / ±2000 V Peak Safety category: CAT III 1000 V Power supply: 100–240 V AC Frequency: 50–60 Hz Power consumption according to the type plate: 500 W Made in Austria Sensor power supply: Integrated redundant sensor power supply ±15 V / 5 A +9 V / 0.6 A 8 sensor connections Features: TRION3-1810M-PA power module 4 high-voltage measuring inputs U1–U4 4 current/measuring channels I1–I4 CNT1 / CNT2 TRIG DC AUX Digital I/O SYNC IN / SYNC OUT Integrated industrial PC Cjdpfozyl Siex Aqvjri Interchangeable drive bays Ethernet / LAN USB interfaces COM1 / COM2 Display interfaces Integrated redundant sensor power supply Free TRION(3) slots for expansion Application areas: Power analysis and power measurement Test bench technology Electric motors and electric drives Inverter and converter testing Battery and energy storage testing E-mobility / Automotive Power electronics Research and development Condition: Used Device can be switched on Optical condition according to pictures Dimensions 442 × 435 × 222 mm Weight: 15.8 kg Scope of delivery: 1 x DEWETRON DEWE3-PA8-RM / DEWE3-RM8 1 x installed TRION3-1810M-PA power module Measuring, sensor, and connection cables as shown in the pictures 2 x brackets as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures The table or other items shown in the photos are not included in the sale unless explicitly mentioned. Shipping via UPS freight service is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Zwick Type: Z30 Technical data: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + testXpert II V3.5 software Cedpfezil Ucox Aqveri Total weight approx. 500 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servohydraulic testing machine – fully functional Description: For sale is a servohydraulic testing machine, Sincotec Power Flow, from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g. in the automotive, mechanical engineering or research field. Technical highlights: Max. testing force: 100 kN (up to ±150 kN) Max. torque: ±2000 Nm (up to ±4000 Nm) Linear stroke: ±50 mm (max. ±75 mm) Max. swivel angle: ±50° Servohydraulic control Csdpszimb Dsfx Aqveri Control via Sincotec TestPilot / CoPilot software Includes large hydraulic power unit Dimensions & testing machine Testing table: approx. 1.20 × 1.00 × 1.20 m (H) Overall height of testing machine: approx. 3.30 m Hydraulic power unit (separate) Height: 2085 mm Length: 2714 mm Width: 1820 mm Fully functional before disassembly Power supply / electrical (from nameplates) Individual units / motors 230 V / 50 Hz Leak oil pump: 0.18 kW / 1.5 A 400 V / 50 Hz (three-phase) Crossbeam: 0.25 kW / 0.79 A Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, IMV Type: i240 + Amplifier SA3M + Fan Crjdpfx Aozimf Aeqvji Dimensions: Power amplifier: SA3M-i40EM-CE WxHxD 580 x 1950 x 850 mm Vibration exciter: i240 WxHxD 1234 x 997 x 720 mm Technical data of the system: Armature mass: 20 kg Armature diameter: 290 mm Armature resonance: 2300 Hz Permissible eccentric moment: 850 N·m Frequency range: 0-2600 Hz Maximum force: 24 kN (Sine and random) 48 kN (Shock) Maximum acceleration: 1200 m/s² (Sine) 840 m/s² (Random) 2400 m/s² (Shock) Maximum displacement: 100 mm p-p Maximum load capacity: 400 kg Environmental conditions: Temperature 0-40 °C, humidity 0-85 %RH Maximum output power: 30 kVA (SA3M-i40EM-CE) + Shaker armature 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3M-i40EM-CE) Total weight approx. 2800 kg Condition: used Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Nirox multi-Thick-MS1-CH1 – Sensor for multi-layer thickness measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, developed for the precise and non-contact measurement of multi-layer materials such as plastic films, composite materials, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industry. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate thickness measurement of individual layers Measurement method: A-scan / optical interference analysis Channel: 1 (CH1) Application areas: In-line measurement in production lines or laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Cedpjziiw Ujfx Aqvjri Scope of delivery: (See image) Sensor multi-Thick-MS1-CH1 Connection cable (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: good (used), Hardness tester, fully functional Upon request, transport and loading can be organized throughout Europe at an additional cost. Prices are exclusive of VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Cjde Ahqy Ajpfx Aqveri Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you wish to sell your equipment? For further information or contact options, please reach out via the contact form.

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 07/24/2020 Complete analysis using the stationary spark optical emission spectrometer SpectroMaxX: Using the spark optical emission spectrometer, the alloy compositions and trace elements of macroscopic solid samples can be determined with high accuracy, down to the ppm range. Description of the system: Open spark stand for high sample throughput A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration ranges depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Output of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm; the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption due to the argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power: 4 kW Display system: Cedpfozizdtjx Aqveri Dedicated microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/grade Result Manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: used, RMS RMS vibration exciter with power amplifier and cooling fan Vibration exciter SW 1511/2 Power amplifier TGD 3000-000 00 Input: 3x400V-50Hz, 14.5 kVA Cooling fan SWG 108 Csdpozdry Usfx Aqvjri Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, BAT Shaker Fixture Cube / Clamping Cube Magnesium Shaker Fixture Cube Professional clamping cube for vibration testing rigs / shakers with an M8 thread grid for flexible test specimen mounting For sale is a used clamping cube for vibration and shock testing rigs. The adapter cube is used to securely hold test specimens on vibration testing rigs (shaker systems). Thanks to the numerous threaded holes on several sides, a wide variety of devices and test specimens can be flexibly mounted. The lightweight magnesium construction offers high rigidity with a comparatively low weight and is ideal for development, endurance, and environmental testing. Technical data: Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Threaded holes: M8 grid on several sides Dimensions (approx.): 300 × 300 × 300 mm Weight: approx. 28–32 kg (estimated) Features: Solid magnesium design M8 thread grid on several sides Two stop eyes Precision-machined clamping surfaces High rigidity with low weight Ideal for individual test setups Accessories as shown in the pictures Areas of application: Vibration testing rigs Shock testing Environmental simulation Automotive testing technology Aerospace Development and testing laboratories Quality assurance Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Codpjzkgqnjfx Aqvori Normal signs of wear and tear, scratches and marks are present. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, LDS Dactron LDS Dactron COMET USB Shaker Control System Type: COM 200 Crsdpfx Aey Ugrpoqvei Vibration Controller / Shaker Controller For sale is a used LDS Dactron COMET USB Shaker Control System, model COM 200. This system is suitable for electrodynamic shaker systems, vibration testing, and shock testing, including random, sine, and shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjaer Type: COMET USB Model: COM 200 Serial Number: 11303191 Made in U.S.A. Technical Specifications 2-channel shaker control system USB connection Power supply: 100 - 240 V Frequency: 47 - 63 Hz Current consumption: 0.5 A Suitable for random, swept-sine, and shock tests on electrodynamic vibration testing systems. Software / Functions Installed software (as displayed): Shaker Control Version 8.1001 Library Version 6.3120 Unlocked module (as displayed in the software): Value Swept Sine Activated option (as displayed in the software): Real Time Data Exchange Calibration Calibration data (according to label): Calibration date: 2010-09-21 Due date: 2011-09-21 Note: The calibration has expired. Recalibration can be arranged by the buyer if required. Connections USB interface BNC connectors Power connector Other connections as shown in the images Scope of supply LDS Dactron COMET USB COM 200 Controller Power cable / connection cable as shown in the images Accessories as shown in the images Condition Used Optical condition as shown in the images Normal signs of storage and use Important note: All information has been provided to the best of our knowledge based on the images, nameplates, and manufacturer information. Shipping is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, Instrument Systems Instrument Systems LED Measurement Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for the precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices come from a laboratory environment, manufactured in 2007–2008, and represent high-quality industrial measurement technology. Scope / included components CAS 140C-152 Spectrometer (2008) Integrating Sphere ISP250-110 + ISP250-211 (2008) LEDGON 100 Goniophotometer (2007) CSD315 3-axis Controller + Emergency Stop Control Panel (2007) Keithley 2611 SMU / SourceMeter PC system including software: Csdpszimaaofx Aqvjri SpecWin Pro SpecWin Light Goniometer module Original license CDs User manual “LED test sockets” Cables & accessories as shown in the photos Technical features Measurement of total luminous flux (lumens) Spectral analysis (color temperature, CRI, xy, spectrum) Goniophotometric angular measurement Analysis of radiation patterns Electrical control and IV measurements with Keithley 2611 Fully automatic measurement sequences with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating Sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Dimensions / weights (total approx. 40–45 kg) Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Zwick / Roell Zwick Indentec Hardness Tester Crjdpfx Aqszh D Rasvoi Type: 4150DLC-A Technical Data: Available test forces: 60, 100, and 150 kgf Power supply: 115 / 230 V (50 - 60 Hz) 2/1A 1L/N/Pe + EO-4010C camera and ueye software Condition: used Weight: approx. 60 kg Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, SincoTec Type: Exciting Mot Resonance test bench POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance test bench is designed as a dual-mass vibrator. It consists of a vibration head, which is excited via an asynchronous motor with frequency control and an eccentric motor. The vibration head is located in the upper part of the machine and generates the dynamic amplitude. The vibration head is supported on the upper traverse via pre-tensioned coil springs and is guided centrally. The center load drive is located in the lower part of the machine and applies the static preload with the aid of a geared motor via a spindle drive. The test chamber is located above the mounting table and is bounded upwards by the adjustable traverse. The control of the test bench is carried out by the EXCITING MOT control system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the test bench: Overall height of the test bench 1840 to 2240 mm Height of the machine table 1030 mm Width of the test bench 800 mm Depth of the test bench 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. class 1 (according to DIN EN 10002-3) Weight of the test bench approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAI 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (right-rotating field) Connection plug CEE socket, 5-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase with PE conductor and protective earth, right-rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent interference Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Csdpszii Awjfx Aqveri Protective earth Ground resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, BAT Shaker Fixture Cube Magnesium Shaker Fixture Cube 400 × 400 × 400 mm Professional fixture cube for vibration test benches, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of magnesium. The fixture cube is suitable for the flexible mounting of test specimens, measuring setups, and fixtures on vibration test benches. The robust magnesium construction offers high rigidity while maintaining a low weight and is used in testing and development laboratories. Technical data: Manufacturer: BAT Material: Magnesium Type: Shaker Fixture Cube External dimensions: approx. 400 × 400 × 400 mm Threaded grid on all sides Several large through-holes for mounting Robust, precision design Crjdpszkhxtofx Aqvei Equipment: Magnesium construction Precision-machined mounting surfaces Threaded holes on all sides Large corner holes for mounting Suitable for individual test setups Accessories as shown in the pictures Application areas: Vibration test benches Vibration testing Environmental testing technology Automotive Aerospace Research and development Testing laboratories Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete system including LED spotlights & manuals For sale is a complete UV curing system from Dr. Hönle, consisting of two control units and several LED spotlights. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing and laboratory operations. Description: The system includes: Bluepoint LED High-Power control unit (REF 45250.c) Bluepoint 2 easycure control unit (REF 33900.a) Several UV LED spotlights (e.g. 365 nm, air-cooled) Adapter BP-LED 4-1 (REF 45970.a) – for controlling up to 4 spotlights Original operating manuals + CD The devices enable precise control of irradiation time, intensity and energy – perfect for reproducible UV curing processes in industry. Technical data: Bluepoint LED High-Power (45250.c): Supply: 36 V / 5.5 A Control of up to 4 LED spotlights UV intensity adjustable Time programs and energy measurement Bluepoint 2 easycure (33900.a): 230 V AC, 50 Hz 570 VA power consumption High-performance LED controller Industrial quality, Made in Germany Dimensions / Total weight: approx. 12–15 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Bluepoint LED High-Power Bluepoint 2 easycure LED spotlights (air-cooled) Adapter BP-LED 4-1 Codpfx Aqezimamsveri Operating manuals CD Original documents (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, RMS Technical specifications (manufacturer/model type – no guarantee): Peak force: “according to the manufacturer’s specifications” in the range of approximately 10 kN. Max. acceleration: “up to approximately 1,000 m/s²” Max. speed: “typically in the range of approximately 1 m/s to a few m/s” Components: Control cabinet TGA 022/3 Vibration exciter SW 6507 Power amplifier TG D 9000-000.00 Fan Condition: used Scope of delivery: Vibration testing system as shown in the picture (Changes and errors in the technical data are subject to change!) Crsdpjzikc Sofx Aqvji We will gladly answer any further questions you may have over the phone.

Condition: used, Bruker Type: Tensor 27 IR Spectrometer Maximum sample flexibility. Credpfx Aozh D Nveqvoi Thanks to the improved QuickLock™ mechanism and the locking button on the front, even bulky accessories can be quickly and, above all, safely installed. In addition, the INVENIO can be equipped with three software-controlled beam outputs for a wide range of external modules. FPA micro and macro imaging Variable external sample chamber (left and right) for individual experiments Fiber optic coupling to fiber probes for liquids and solids Integrating sphere Autosampler for liquids High-throughput analysis module HTS-XT Reflection unit for the air-water interface And much more! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, WEISS TECHNIK Weiss Technik WK1-180/70 Climate Test Chamber, Temperature Test Chamber – -70 to +180 °C – 5.5 kW Weiss Technik WK1-180/70 Climate and temperature test chamber with a stainless steel test chamber, digital control panel, and a temperature range of -70 to +180 °C. For sale is a used climate test chamber from the manufacturer Weiss Umwelttechnik GmbH. This device is suitable for temperature and climate testing of components, assemblies, and industrial products. The temperature range extends from a minimum of -70 °C to a maximum of +180 °C. The test chamber features a stainless steel test chamber, an insulated door with a viewing window, and a digital control panel. Lateral cable entries allow for the connection of measuring cables during testing. Technical data: Manufacturer: Weiss Umwelttechnik GmbH / Weiss Technik Model: WK1-180/70 Product type: Climate and temperature test chamber Device no.: 58226012250020 Material no.: 67609071 Temperature range: -70 to +180 °C Operating hours according to display: 45,555.3 h Permissible operating overpressure: 25 bar Test chamber volume: approx. 190 liters Electrical data: Voltage supply: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 5.5 kW Rated current: 12 A Refrigerant: R404A: 2.3 kg R23: 0.8 kg Equipment: Digital control and operating panel Stainless steel test chamber with insert grid Insulated test chamber door with viewing window Interior lighting Circulation fan Lateral cable entries Cable entries: Measured diameters: approx. 57.69 mm approx. 87.23 mm approx. 132.42 mm Scope of supply: 1 × Weiss Technik WK1-180/70 Climate Test Chamber with integrated control panel and insert grid as shown in the picture. The sale is made in the condition shown. Crjdpfs Agmfnox Aqvei Condition: Used Signs of wear and tear due to age and use. Condition and scope of supply see pictures. Tools, machines, and other items not explicitly mentioned are not included in the sale. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Brüel & Kjær LDS Dactron Shaker Control System / Vibration Testing Controller LDS Dactron LASER USB LAS 200 Controller for electrodynamic vibration testing systems For sale is a used Shaker Control System from the manufacturer Brüel & Kjær LDS Dactron. The system is suitable for controlling electrodynamic shaker systems for vibration, resonance, random, and shock tests in research, development, and quality assurance. Technical data: Manufacturer: Brüel & Kjær LDS Dactron Type: LASER USB Model: LAS 200 Device type: Shaker Control System / Vibration Testing Controller Country of manufacture: Made in U.S.A. Mains connection: 100–240 V AC Mains frequency: 47–63 Hz Power consumption: 1 A Analog inputs: 8 × BNC Outputs: 2 × (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency stop connection Calibration: Calibrated: 09/12/2023 Due: 09/11/2024 Dimensions: approx. 430 × 350 × 90 mm (W × D × H) Weight: approx. 6–8 kg Equipment: USB license dongle Power cable 8 measurement inputs USB interface Digital I/O Documentation as shown in the pictures Application areas: Vibration testing Oscillation testing Random tests Resonance tests Shock tests Endurance tests Test rig control Scope of delivery: Credpfxozrtylo Aqvsi 1 × LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Condition: Used Optical condition as shown in the pictures Calibration sticker present Important note: The license keys visible in the documents have been obscured for data protection and security reasons. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, RMS RMS Electrodynamic Vibration Test System Vibration exciter SW 3006+ Power amplifier TGA 1500 Technical data: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Displacement pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) Crsdpfx Aqjzd Rvzevei We will be happy to answer any further questions you may have over the phone.

Condition: used, Binder Type: VDL 115 Binder Safety Vacuum Drying Oven For sale is a BINDER VDL 115 safety vacuum drying oven for professional use in laboratories, industry, and research. Credpfeziyymsx Aqvei Device description: The BINDER VDL 115 is an explosion-proof vacuum drying oven for gentle drying, degassing, and conditioning of materials under vacuum. The device is specifically designed for applications involving flammable solvents and meets high safety requirements (ATEX version). Due to the precise control of temperature and pressure, the device is ideally suited for reproducible laboratory and industrial processes. Typical applications: Chemical and pharmaceutical laboratories Research & development Quality control Industrial drying processes under vacuum Temperature / Vacuum: Temperature range: +9 °C above ambient to approximately +110 °C Final vacuum: up to approximately 0.01 mbar Electronic temperature and pressure control Equipment: Safety glass pane with splinter protection ATEX-compliant design Several insertion levels (number depending on the configuration) Connections for vacuum and inert gas Dimensions: Internal volume: approximately 115–119 liters Internal dimensions (W × D × H): approximately 506 × 460 × 506 mm External dimensions (W × D × H): approximately 743 × 581 × 942 mm Electrical data: Rated power: 1.90 kW Mains connection: 230 V / 1N~ Current consumption: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Rated temperature: 200 °C Temperature protection: DIN 12880, Class 2.0 Weight (empty): approximately 158 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Thermo Scientific Crsdpfx Ajziy D Eeqvsi   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Single STW150 temperature control system 85°C   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system   Description – Function & Application   For sale is a professional temperature control and drying system consisting of:   Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single water temperature control unit STW 150/1-3-10-K5   The forced convection drying oven ensures uniform temperature distribution in the interior and is ideal for drying, heating, and tempering samples, components or materials.   The heating is carried out via the external water temperature control unit (external heater). This achieves a very stable, indirect, and material-friendly temperature control - without local overheating and with homogeneous heat distribution.   Typical applications:   Laboratory & Research Industry & Production Material testing / component drying Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable.   Unit 1 – Forced Convection Drying Oven:   Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F   Technical data: Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20   Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg   Unit 2 – Water Temperature Control Unit:   Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5   Technical data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating power: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C   Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm   Weight: 55 kg   Total:   Complete temperature control and drying system Operation together possible (external heating / external heater) Total weight: approx. 155 kg   Important note: "The table shown in the photos is not part of the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by phone.

Condition: used, Binder Safety Vacuum Drying Oven Binder VDL 115 Safety Vacuum Drying Oven ATEX version for potentially explosive areas For sale is a used safety vacuum drying oven from the manufacturer BINDER GmbH. The vacuum drying oven is suitable for gentle drying, degassing, and conditioning of temperature-sensitive materials under vacuum, as well as for applications with flammable solvents. Technical data Manufacturer: BINDER GmbH Type: VDL 115 Device type: Safety vacuum drying oven Internal volume: approx. 115 liters Internal dimensions: approx. 506 × 460 × 506 mm (W × D × H) External dimensions: approx. 743 × 581 × 942 mm (W × D × H) Weight: approx. 158 kg Temperature range: approx. +9 °C above ambient to +110 °C Ultimate vacuum: up to approx. 0.01 mbar Electronic temperature and pressure control Rated temperature: 200 °C Rated power: 1.90 kW Mains connection: 230 V / 1N~ Rated current: 8.3 A Frequency: 50–60 Hz Protection class: IP54 Temperature protection: DIN 12880 Class 2.0 Item number: 9030-0012 Equipment ATEX version Electronic temperature control Vacuum indicator Digital display Viewing window in the door Stainless steel interior Several insertion levels Connection for vacuum Connection for inert gas Original brief operating instructions on the device Application areas Chemical laboratories Pharmaceutical laboratories Research and development Quality control Material testing Gentle vacuum drying Degassing and conditioning Condition Credpeznbm Eofx Aqvji Used Optical condition as shown in the pictures Scope of supply 1x Binder VDL 115 Safety Vacuum Drying Oven Accessories as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Zwick / Roell Material Testing Machine / Universal Testing Machine Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 20 kN material testing machine for tensile and compression testing with testControl II & testXpert V3.5 For sale is a used material testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, Codpezra Rqsfx Aqveri and numerous other materials in the laboratory, quality assurance, research and development. Technical data: Manufacturer: Zwick / Roell Model series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Testing force: 20 kN Testing direction: Tensile & Compression Testing space height: 1000 mm Crosshead speed: 0.0005–1000 mm/min Power connection: 230 V / 50–60 Hz Power consumption: 8 A Electronics: testControl II Software: Zwick / Roell testXpert V3.5 Equipment: Servo-electric material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Test fixture Various connection and cable sets Accessories as shown in the pictures Dimensions and weight: Machine dimensions (approx.): 1244 × 690 × 1324 mm (W × D × H) Weight: approx. 212 kg Application areas: Tensile testing Compression testing Material testing Quality assurance Research & Development Testing laboratory Education and training Scope of supply: 1 × Zwick / Roell Z020 Allround-Line material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Connection and cable sets Further accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Functional scope as shown in the pictures Nameplates are present The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.