Used material testing for sale (480)

Condition: used, Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN, Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from an industrial setting and has been professionally operated. General Data: Crodpszizrkefx Aqvji Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Type of test: Tensile and compression test Technical Performance Data: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnenn (nominal speed) Displacement resolution: 0.038 µm Positioning repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Data transfer to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working space width: 440 mm Working space height (bottom): 1,050 mm Weight with typical components: approx. 160 kg Electrical Data: Adjustable mains voltage: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current consumption at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented test and calibration records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Temperature during testing: 23.3 °C Displacement measurement system: Incremental encoder (rotary) Force sensor installed 29.01.2014 Force sensor: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force sensor: Xforce P Module: DCSC Rotation before test series: 120° testXpert control system Documented service and calibration records are available. Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measuring module Force sensor Xforce P / Xforce HP Incremental encoder (rotary displacement measurement system) ISO 7500-1 compliant force measurement Installed under the traverse Important Note: “The table shown in the photos is not part of the sale.” Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force sensor DCSC module Specimens / Grips Adapters and holders Tools Documentation folder with documents Scope of delivery as shown in the pictures. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideal for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Mains current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Operating console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the pictures Technical documentation as shown in the pictures Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of delivery: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Operating console Testing platens / compression tools as shown in the pictures Machine accessories as shown in the pictures Technical documentation as shown in the pictures Important note: To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for recommissioning. A functional test could not be carried out due to the missing software. The sale is therefore preferably aimed at specialist companies Crjdpfx Aqozlp Ixsvsi for recommissioning or upgrading. Condition: Used Optical condition according to the pictures. Normal signs of wear and tear are present. The workbench shown in the photos is not part of the sale. The operating console and the machine accessories shown are included in the scope of delivery. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading with a forklift is possible. Shipping via a freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone or email.

Condition: used, RMS Type: SW 3009 Crjdszdta Aspfx Aqvei RMS Vibration Exciter RMS Vibration Exciter SW 3009 with side-channel blower SKP49033-01/06 Type: SW 3009 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: like new (used), functionality: fully functional, Year of construction: 2026, - Automatic hot mounting press - Product details: - corrosion-resistant table model with automatic hydraulic hot mounting - electro-hydraulic automatic system Crjdpfx Ast Dvyfjqvoi - 7-inch user-friendly LCD touchscreen system - Preset programming and data storage parameters (up to 100 memory locations) - Setting of heating time, cooling time, assembly temperature, pressure build-up and cycle start via the LCD touchscreen - Cooling process - slow cooling, medium cooling and fast cooling mechanism. - Easy replacement of the mold assemblies - Sliding locking mechanism - Automatic water cooling system - Timer buzzer display for heating and cooling cycles - Possible sizes: 1 inch, 1 ½ inch, 2 inch, 30 mm, 40 mm and 50 mm - Power supply: 230 V / 50 Hz - Machine color: 3-Rath design (grey/red)

Condition: used, EOS / Transitube Powder conveying system / dosing system EOS Transitube DCL 800/30 PM Automatic powder conveying and dosing system for two components For sale is a used powder conveying system from the manufacturer Transitube / tim plast Anlagenbau GmbH. The system is used for the continuous dosing, conveying, and homogenization of powders, ground materials, or granules and is ideally suited for plastics processing, extrusion, and injection molding. Technical data: Manufacturer: transitube / tim plast Anlagenbau GmbH Type: DCL 800/30 PM Designation: EOS powder conveying system Credpfx Aezn H D Njqvei Dosing system for 2 components 2 material containers, each approx. 400 liters Continuous dosing and mixing Materials: Powder Granulate Ground material / regranulate Power connection: 3/N/PE 400 V AC Frequency: 50 / 60 Hz Connected load: 2.0 kW Weight: approx. 180 kg Dimensions (approx.): Width: 1850 mm Depth: 900 mm Height: 1320 mm Dosing capacity, model-dependent: approx. 50 to 2,000 kg/h Dosing accuracy: ±0.5 to ±2 % Dosing range: 5 to 50 % Additive dosing: 0.2 to 10 % Equipment: 2 dosing containers with hinged lids Automatic control cabinet with touch panel Transitube conveying and mixing system Electrical control Screw dosing Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Various conveying hoses Piping Accessories as shown in the pictures Application areas: Plastics industry Extrusion Injection molding Powder conveying Material dosing Regranulate dosing Mixing systems Production automation Condition: Used Visual condition as shown in the pictures. Scope of delivery as shown in the pictures. Scope of delivery: 1x EOS Transitube DCL 800/30 PM powder conveying system Complete control cabinet Conveying units Motors Pneumatic components Hoses Piping system Accessories as shown in the pictures Important note: The system is sold as shown in the pictures. Please note the scope of delivery in the photos. Tables, tools, or other aids that may be visible in the pictures are not included in the scope of delivery unless explicitly stated. Shipping via freight forwarder is possible. Inspection is possible at any time by appointment. Subject to prior sale and errors. If you have any questions, please do not hesitate to contact us by telephone.

Condition: used, Universal   Shaker angle adapters / adapter devices   Universal shaker accessories Heavy-duty aluminum angle adapters, clamping devices, and adapter elements for vibration testing systems, vibration tests, and special applications   For sale is a used accessory set for an electrodynamic shaker or vibration testing system.   The set consists of various heavy-duty aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. Ideal for test specimen mounting, special designs, and vibration tests.   Technical data:   Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration testing system Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners   Components: Several heavy-duty angle adapters Adapter plates of various sizes Clamping and tightening devices Clamping blocks and adapter elements Fastening materials and other accessories as shown in the pictures   Features:   Heavy-duty aluminum construction Threaded and clearance holes Universally applicable Angle adapters for test specimen mounting Adapter plates Clamping and tightening devices Accessories as shown in the pictures   Application areas:   Electrodynamic shakers Vibration testing systems Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs   Scope of supply:   Complete accessory set as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Fastening materials Other accessories as shown in the pictures   Weight: 600 kg Credjzpx Ucspfx Aqvoi   Condition:   Used Visual condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present.   Only the accessories shown in the pictures are sold.   The table shown in the pictures or other items not explicitly mentioned are not included in the sale.   Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in easy-to-use laboratory weathering equipment. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Crjdpszg Tmhsfx Aqvei Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000's humidification system uses a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron solid particle filter. Ensure that a separate oil-water separator is installed and do not rely on the air regulator filter, as it is designed only as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 37.5" Width x 29" Depth x 72" Height (95 cm Width x 73 cm Depth x 183 cm Height) Required footprint: 41.5" Width x 80" Depth (105 cm Width x 203 cm Depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and information!) We would be happy to answer any further questions you may have by telephone.

Condition: used, VÖTSCH Vötsch VT³ 7012 S2 Cold and Heat Shock Testing Chamber – Temperature Shock Chamber, -80 °C to +220 °C – 125 Liters Vötsch VT³ 7012 S2 Industrial temperature shock testing chamber with two temperature zones, 125-liter test chamber volume, and digital touchscreen control For sale is a Vötsch cold and heat shock testing chamber, model VT³ 7012 S2. The unit is suitable for testing components, electronic parts, and materials under rapid temperature changes. The hot chamber has a temperature range of +50 to +220 °C, and the cold chamber has a temperature range of -80 to +70 °C. The testing chamber has two temperature zones, a stainless steel test chamber, and a digital touchscreen control for setting and monitoring test programs and test cycles. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Model / Type: VT³ 7012 S2 Product type: Cold and heat shock testing chamber / Temperature shock chamber Year of manufacture: 2016 Equipment number: 58566224220040 Test chamber volume: approx. 125 liters (model specification) Temperature zones: 2 Operation: Digital touchscreen Operating hours according to control display: 4,800.5 h Weight: approx. 1,000 kg (estimate, not weighed) Temperature ranges: Hot chamber: +50 to +220 °C Cold chamber: -80 to +70 °C Temperature ranges according to technical model specifications. Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated power: 10 kW Rated current: 25 A Refrigerant: R404A: 1.70 kg R23: 1.27 kg Pressure specifications: Maximum low pressure: 22.5 bar(g) Maximum high pressure: 25 bar(g) Standing pressure: 14 bar(g) Equipment: Two temperature zones for cold and heat shock testing Stainless steel test chamber Insulated test chamber door with viewing window Interior lighting Air circulation system with fans Digital touchscreen control with graphical user interface Digital temperature displays RS232 interface RS485/RS422 interface Connection options for external measurement and control functions Scope of delivery: 1 × Vötsch VT³ 7012 S2 temperature shock testing chamber with integrated touchscreen control and existing equipment as shown in the picture. Other accessories not shown in the picture are not included in the offer. Condition: Used Optically well-maintained condition with typical signs of wear. The unit can be switched on. Touchscreen control, temperature displays, and interior lighting are functioning. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to change, errors, and prior sale. Crjdpfx Aj Agm Ucsqvoi We would be happy to answer any further questions by telephone.

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Cedpfxjzfy Ivo Aqvjri Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Primus Engineering Type: DST 350 This test setup was designed for performing IP protection tests for “dust” according to, for example, DIN 40050 Part 9 and DIN EN 60529. The test setup is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Pre-programmed test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 KW Connection voltage: 400V/50HZ 3-N/PE (16A EEC socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Cjdszgbtiopfx Aqvsri Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing IP protection tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Automation Assistant Oy Linear Guided Free Fall Tester Cedpfx Aqozn Uqdjveri Automation Assistant Oy LG2750 Professional linear guided free fall test stand for reproducible drop and impact tests For sale is a used Linear Guided Free Fall Tester from the manufacturer Automation Assistant Oy. The test stand is suitable for reproducible drop and impact tests in research, development, quality assurance, and industry. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Machine type: Linear Guided Free Fall Tester Made in Finland Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: Concrete garden brick 300 × 300 × 50 mm Dimensions (approx.): Width: 850 mm, Depth: 900 mm, Height: 2750 mm Total weight: approx. 210 kg Test tower: approx. 155 kg Impact table: approx. 55 kg Equipment: Touchscreen control panel Enclosed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Accessories as shown in the pictures Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Scope of delivery: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Manufacturer unknown Shaker Fixture Cube / Clamping Cube Aluminum Shaker Fixture Cube, approx. 240 × 240 × 240 mm Professional clamping cube for vibration testing systems, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube is suitable for the flexible attachment of test specimens, measurement setups, and fixtures on vibration testing systems. Codpfx Aszp E Dkeqvsri The solid aluminum construction offers high rigidity and is ideal for vibration tests, environmental testing technology, mechanical engineering, as well as research and development laboratories. Technical data: Manufacturer: Unknown Material: Aluminum Type: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 precision mounting holes, Ø approx. 85 mm Central through-hole Threaded holes on all side surfaces Precision-machined clamping surfaces Robust industrial design Weight: 30 kg Features: Solid aluminum construction Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through-hole Suitable for individual test setups High rigidity with a compact design Accessories as shown in the pictures Application areas: Vibration testing systems Vibration testing Environmental testing technology Test stands Metrology Mechanical engineering Special machine construction Automotive Aerospace Research and development Testing laboratories Industry Scope of supply: Aluminum Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, DSM Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Fastening system Condition: used Crjdpfszgabfex Aqvsi Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, RMS RMS vibration exciter with power amplifier and cooling fan Vibration exciter SW 3009 Tightening torque: 21 Nm Insertion depth: 15 mm Power amplifier TGA 6014 Credpfozdtbmsx Aqvei 3 x 380V / 50Hz / 35A / 23 kVA Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Condition: used, Mahr Type: Helio-Pan II 700 Helio-Pan II Max. workpiece weight 30 kg at center height 100 mm 80 kg at center height 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable runout: 100 mm Center height: 100 mm Measuring probes: probe and measuring slide, 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will gladly answer any further questions you may have over the phone. Cedezd R U Dopfx Aqvsri

Condition: used, Zwick / Roell Cjdpfx Aszdr Hnjqvori Type: BDO-FB0.5TH Zwick / Roell tensile testing machine, table-top testing machine Material testing machine BDO-FB0.5TH Testing load in tensile/compressive direction: 500 N Height: 1565 mm, Width: 292 mm, Depth: 469 mm Width of test area: infinite Test area depth: 100 mm Max. working distance without accessories: 1266 mm PC or printer interface: RS 232 Required PC connection (for PC operation): COM 1 Power data: 115/230 V (PH, N, PE) Rated power: 0.4 kVA Mains frequency: 50/60 Hz Weight: 47 kg Condition: used Scope of supply: (autosampler as shown in the picture) (Subject to changes and errors in the technical data; details are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Oxford Instruments Type: INCAx-act + 2 x-stream mics + PC and software INCAx-act Analytical Drift Detector Microanalysis of elements, including boron and above Operating temperature Normal mode: 10-25 degrees Operating temperature Extended mode: 10-30 degrees Storage temperature -25 to 40 degrees and 8 to 80% relative humidity, non-condensing Operating humidity Csdpfx Aqezd Ru Djvori

Condition: used, PINK Type: PINK VT 300-600-300-1 Vacuum drying oven Space requirements for operation and maintenance Width min. 3000 mm, Height min. 2500 mm, Depth min. 2500 mm Dimensions VT External dimensions: Width approx. 1170 mm, Depth approx. 1380 mm, Height approx. 1615 mm Overall height 1970 mm Internal dimensions: Width approx. 360 mm, Depth approx. 735 mm, Height approx. 300 mm Volume of vacuum chamber: 79 liters Cjdozdi Ivepfx Aqveri Operating temperature: min. 20°C, max. 150°C Electrical connection: Connection power 3 x 400 V; 50 Hz N / PE 8.5 kVA Heating power: 6 kW Cooling power: 6 kW at 15°C medium temperature and 15°C cooling water Heating: Floor, ceiling, side walls and door double-walled, heat transfer medium flows through Heat transfer medium: Heat transfer oil Mobiltherm 32, filling quantity approx. 20 liters depending on the length of the pipeline Compressed air: Pressure 6 bar Nitrogen N2: Pressure Nitrogen N2 Pressure Permissible operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system: 3 bar Weight: 300 kg Condition: used Scope of delivery: (PINK VT 300-600-300-1, operating manual) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Weiss   Type: WT-600/70   Weiss Temperature Test Chamber, Water-Cooled   Technical Data: Test chamber designation: WT-600/70   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions:   Height 950 mm, Width 800 mm, Depth 800 mm   Test chamber volume: approx. 600 liters   Cooling / Heating operation -70°C to 180°C   Temperature change per unit of time Cooling down approx. 2.5 K/min Cjdpfx Aqozd R Drsvori Heating up approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on customer side: 32 A, slow-blow Permissible test item weight Total load of the shelf supports 80kg   Test chamber floor 80kg, insert shelf 40kg   Refrigerant: R 404A/R23   Weight: 675 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, WEISS Weiss WK3-1000/70 climate testing chamber with temperature and humidity control – 990 liters – -70 to +180 °C Weiss WK3-1000/70 Air-cooled climate and temperature testing chamber with touch panel, 990 liters test chamber volume, and a temperature range of -70 to +180 °C For sale is a Weiss climate testing chamber, type WK3-1000/70, with temperature and humidity control. The unit is suitable for temperature and climate testing of components, assemblies, and industrial products. The integrated touch panel allows for setting and monitoring temperature, humidity, and test programs. Technical data: Manufacturer: Weiss Type: WK3-1000/70 Product type: Climate and temperature testing chamber Serial number: 59226115080010 Cjdpfo Aghkusx Aqvori Test chamber volume: approx. 990 liters Cooling: Air-cooled Operation: Touch panel Weight: approx. 955 kg Test chamber dimensions: Height: 950 mm Width: 1,100 mm Depth: 950 mm External dimensions: Height: approx. 2,000 mm Width: 1,415 mm Depth: 2,105 mm Data for temperature testing: Temperature range: -70 to +180 °C Heating rate: approx. 4.0 K/min Cooling rate: approx. 2.5 K/min Data for climate testing: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % relative humidity Electrical data: Rated voltage: 3/N/PE AC 400 V ± 10 % Mains frequency: 50 Hz Rated current: 29 A Rated power: 13.8 kW Refrigerant: R404A: 4.6 kg R23: 1.2 kg Equipment: Touch panel for operation and program control Test chamber made of stainless steel Viewing window with lighting Air circulation system with fans Insert shelf Side openings: approx. 50 mm and 130 mm Communication interfaces Testing: The climate testing chamber has been tested. Heating, cooling, and humidity functions have been checked. Scope of delivery: 1 × Weiss WK3-1000/70 climate testing chamber with integrated equipment and insert shelf Scope of delivery as shown in the pictures. Condition: Used The unit has been tested. Condition and scope of delivery, see pictures. Tools, machines, and other items not explicitly mentioned are not part of the sale. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Type: VT 7012 S3 Vötsch Shock Test Chamber Water-cooled Temperature range: -80°C to +220°C Warm chamber: +50 to +220°C Medium chamber: -10 to +90°C Cold chamber: -80 to +70°C Supply voltage: 400V ±10% 3/N 50Hz Rated current: 30.5 A Rated power: 13.5 kW Refrigerant VK: R 404A 3.00 kg p*: 25 bar Refrigerant TK: R23 15 bar p*: 25 bar Crsdezd Uzuepfx Aqvei For your safety as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. Credpszil Uisfx Aqvei (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Zwick Testing Machine Type: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions H x W x D: 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Credpfxjzil Upe Aqvji ClipOn extensometer, 13.5 mm MFA 25 extensometer (temperature range up to +200°C) Computer + testXpert II V3.5 software Climate chamber: Airtemp LKG-K-TK-50 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone. Written orders can be placed by email or fax.

Condition: used, SincoTec Type: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic testing machine Description: For sale is a servo-hydraulic biaxial testing machine, the SincoTec POWER FLOW BIAXIAL. The machine comes from an industrial application and was fully functional until it was decommissioned. Service and maintenance were carried out professionally. Extensive technical documentation (operating, assembly, and wiring diagrams) is available. The testing machine is suitable for tensile/compression tests, torsion tests, and combined load tests on components and assemblies, e.g., for fatigue, life, and functional tests. Technical main data of the testing machine: Maximum test force (design): up to ±150 kN Typical operating design: 125 kN Max. torque (torsion): ± 4,000 Nm Max. stroke of linear cylinder: ± 75 mm Max. angle of rotation: ± 50° Measurement accuracy: Class 1 (DIN EN 10002-3) Dimensions of the testing machine: Overall height: approx. 3,430 mm Width: approx. 1,480 mm Depth: approx. 1,180 mm Max. weight of clamping device: 250 kg Hydraulic power unit (included in the scope of delivery) Drive power: approx. 152 kW Flow rate: approx. 260 l/min Operating pressure: up to 280 bar Crjdpfx Aozimcbsqvei Hydraulic oil: HLP ISO VG 46 Tank volume: approx. 1,500 liters Dimensions of the power unit: Length approx. 2,714 mm Width approx. 1,820 mm Height approx. 2,085 mm Electrical data: Control cabinet / testing machine 400 V / 50 Hz Connection: CEE 5-pole Fuse: 16 A Hydraulic power unit 400 V / 50 Hz three-phase Fixed connection Fuse: approx. 160 A Scope of delivery Servo-hydraulic testing machine SincoTec POWER FLOW BIAXIAL Hydraulic power unit Control cabinet with industrial PC Measuring and control technology Technical documentation The machine is designed for a maximum of 150 kN. The 125 kN specification refers to the typical operating design. Weight of testing machine: approx. 4.7 t Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Universal Shaker accessories / adapter plates / expander plates Universal accessory kit for electrodynamic shaker test systems Professional accessory kit with expander plate, adapter plates, and clamping accessories for vibration test benches, vibration testing, and material testing. For sale is a comprehensive used accessory kit for an electrodynamic shaker or vibration test bench. The accessory kit is ideal for setting up test specimens, special fixtures, adapter constructions, and individual test setups. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, adapter elements, and other accessories. Technical data: Manufacturer: unknown Type: accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components: 1 reinforced expander plate, approx. 770 × 770 mm – approx. 90 kg 2 adapter plates, approx. 770 × 770 mm – approx. 45 kg and approx. 40 kg 1 adapter plate, approx. 770 × 770 mm – approx. 35 kg 1 adapter plate with circular cutouts – approx. 25 kg 1 round adapter plate – approx. 20 kg 1 clamping rail / linear adapter – approx. 25 kg 1 precision adapter block – approx. 3.06 kg 1 steel adapter plate – approx. 2.18 kg Other adapter and fastening parts as shown in the pictures Features: Solid aluminum adapter plates Reinforced expander plate with central mounting Credpszp D Tkjfx Aqvei Precision-engineered hole and thread patterns High stiffness for dynamic loads Adapter plates of various sizes and weights Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Other adapter and fastening parts as shown in the pictures Application areas: Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen mounting and special constructions Scope of delivery: Complete accessory kit as shown in the pictures 1 expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Other adapter and fastening parts as shown in the pictures Weight: 400 kg Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear, scratches, and pressure marks are present. Some minor edge damage and signs of wear from test operation. Only the accessories shown in the pictures are for sale. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Due to the high total weight, shipping is only possible via freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.