Used edgebanders for sale (559)

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-261-95-3811, functionality: fully functional, operating hours: 2,076 h, input voltage: 400 V, input current: 24 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, We offer this Brandt Highflex 1440 Edge banding machine that has very low hour for a 2016 machine. With edge rounding and corner profiling. Cedpfxsyx H D Hj Acvogr

Condition: excellent (used), Year of construction: 2019, Specification Cgodpfx Acoypm Dgjvjr 2 tanks 1 cleaning station Suitable for right sided machine such as Edgeteq S-240, S-300 and S-380 400V 50Hz

Condition: excellent (used), Year of construction: 2019, Specification: Working height: 950mm Length: 4773mm Workpiece Thickness: 60mm Edge Material Roll: 0.4-3mm Edge Material Strip:0.4-6mm Adjustable Infeed Fence Workpiece Support Feed Speed 11m/min Central Lubrication Roller Top Pressure Manual Top Pressure Adjustment Separating Agent Spray Device Joint Trimming Unit 2x2.2kw Panel Pre-Heating QA65 Application unit for PUR Pressure Zone End Trim Unit Trimming Unit Counter Trimming unit Radius Scraping Unit with 2 sets of quick change heads Glue Joint Scraping Detergent Spraying Unit Buffers 400V 50Hz CE XES 200 with 2 tanks and 1 cleaning station including collecting tray. Cgjdeypm Avopfx Acvor

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 Cjdpsyyb Icsfx Acvegr SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, Year of construction: 2016, Vitap Eclipse Edgebander for round shaped, curved workpieces Semi-automatic edge banding machine for large round or curved workpieces with a panel thickness between 10 and 60 mm and a belt thickness between 1 and 3 mm. The 60 mm height is only possible with an edge banding thickness of 1 mm. If the edge band is thicker, it depends on the quality of the band and must be tested beforehand in connection with the cutting unit. Description; Two copy rollers for the shape of the workpiece to be scanned Gluing station Glue tray with a capacity of 1 kg Two 800W heating elements with electronic temperature display via the PLC Glue application via glue roller Glue tray made of aluminum for heat distribution Glue supply can be adjusted by means of a button Automatic cutting unit for edge banding material on the roll from 3 to 45 mm Aggregate is activated by a sensor for closed edge tape with a perfect connection or by an encoder if only 1 side is pasted Laser system for length determination, no pre-measurement necessary On-off capability for throughput Height-adjustable table for narrow panels On-off capability for milling aggregate Two copy rollers for the shape of the workpiece to be scanned Milling unit equipped with 2 x 0.5 kW (15000 rpm high frequency) with top, bottom and front copy rollers Milling unit equipped with blades R=2, Phase 15°, D=69, Z=6 Large panel turntable with vacuum to hold product (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) Cgjdpfx Aowgb Hxocvjr (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Edgebanding Machine Advantage 4612F - Regularly maintained, year of manufacture 2002 - Total length 6000 mm - Width 1100 mm - Height 1900 mm - Weight 3100 kg Cgsdpfxox Srp Io Acver - Feed rate: 12 m/min - Workpiece dimensions: width 65 mm, max. thickness 45 mm, min. thickness 10 mm, length 150 mm, edge height 55 mm, 7 bar pressure - With two interchangeable glue pots - Pre-milling, flush trimming saw, multifunction unit, profile & surface scraper, buffing - With pre-milling unit

Condition: good (used), Year of construction: 2004, Used Edgebanding Machine Model: Hebrock AKV 3005 DKF Year of Manufacture: 2004 Direct glue application onto the workpiece Cgodpfx Acsyyw Tzovsr Includes jointing unit Edge material magazine divider High-frequency cross-cut saw Chip collection box (cross-cut saw) Pneumatic roller end trimming Control panel, PLC control system Transport chain with fixed, special chain plates Double roller top pressure (ball bearing mounted) Outrigger (extendable towards the front) Automatic central lubrication (cross-cut saw, corner rounding unit) Quick heating glue pot (maintenance-free, Teflon-coated) Maintenance- and operator-friendly design Corner rounding unit Profile scraping unit Surface scraper Chip collection box (scraping unit) Max. edge thickness: 3 mm Min./max. workpiece thickness: 10 / 40* mm Min. workpiece length: approx. 200* mm Min. workpiece width: approx. 70* mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Max. total connected load: 12 kW Electrical connection: 400 V / 3 Ph / 50 Hz Dimensions (L x W): 5000 x 1445 mm Height: 1620 mm Weight: 1400 kg

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: AH/335516, functionality: fully functional, input voltage: 400 V, input current: 68 A, Equipment: CE marking, TECHNICAL DETAILS Number of processing units: 10 1st unit: Spraying device Tools included 2nd unit: Glue applicator 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Rough milling unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Radius scraping unit Tools included 9th unit: Flat scraping unit Tools included Cgjdpfoyuyluox Acvjr 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Current consumption: 68 A Number of transport packages: 2 EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, power: 16.2 kW (22.03 HP), input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, overall weight: 2,200 kg, TECHNICAL DETAILS Number of machining units: 10 1st unit: Pre-milling unit Tools included 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included Cgedpfoyuyfzox Acvsr 5th unit: Rough trimming unit Tools included 6th unit: Corner rounding unit Tools included 7th unit: Fine trimming unit Tools included 8th unit: Corner rounding unit Tools included 9th unit: Radius scraper unit Tools included 10th unit: Brushing unit Tools included MACHINE DETAILS Voltage: 400 V Power: 16.2 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,415 x 1,670 mm Machine weight: 2,200 kg EQUIPMENT CE marking

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 42 A, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Number of units: 9 1st unit: Pre-milling unit Tools included Cgodpfx Acsyux Risver 2nd unit: Glue application unit 3rd unit: Pressure rollers Tools included 4th unit: End trimming unit Tools included 5th unit: Corner rounding unit Tools included 6th unit: Radius scraper unit Tools included 7th unit: Corner rounding unit Tools included 8th unit: Flat scraper unit Tools included 9th unit: Buffing unit Tools included MACHINE DETAILS Voltage: 400 V Current: 42 A Dimensions (L x W x H): 4,800 mm x 1,000 mm x 1,800 mm EQUIPMENT Glue pot

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Power: 11 kW Line voltage: 400 V Cgjdpfx Ajyux Egjcver Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Cgsdpfeu R S Nwsx Acver Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, machine/vehicle number: 007840, Type of edging: Thin edge, Thick edge Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 30 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr Csdpjyg Eg Iofx Acvjgr

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Codpfx Acew Tq Iwjvogr Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 0-261-20-6827, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Type KDF 220 Profiline Year of manufacture: 2012 Units controlled from display Codeyy S Adepfx Acvsgr Jointing unit: 2 x 2.2 kW Gluing unit A6 End trimming saw unit: 2 x 0.18 kW Flush milling unit: 2 x 0.27 kW Profile milling unit: 2 x 0.35 kW WD 40 Radius scraper Surface scraper Edge thickness: 0.4 - 6 mm Workpiece thickness: 8-60 mm Feed speed: 11 m/min Total power: 16 kW Length: 4150 mm

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) Csdpsyw Nu Eofx Acvjgr • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: used, Year of construction: 2014, with jointing cutter aggregate including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm Combination milling station with R 2.5 mm radius Technical description: - Hot-melt glue application to the workpiece for edge material up to 3 mm Cjdpeyfp N Djfx Acvjgr - 60 mm workpiece thickness without jointing aggregate, 40 mm workpiece thickness with jointing aggregate - Maintenance-free, coated glue pot - HF end-trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable insert cutter (combination design) and fine adjustment of the cutter from the operator side - Spare spaces for additional processing aggregates (Hebrock system) - Feed rate approx. 10 m/min - Adjustable cut depth for the end trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view windows from machine rear and operator side - PLC control including touchscreen Technical data: - Feed rate 10 m/min - Panel thicknesses from 8 - 40 mm - Weight: depending on configuration, approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm Airtronic for machines up to 8 mm edge thickness, 1 unit Technical data: - Edge thickness from 1.2 mm – 3.0 mm possible - Maximum panel thickness 25 mm - Feed speed 7 – 10 m/min depending on edge material - Ready for operation in 3 min - Air consumption approx. 800 l/min for the entire machine - Power supply up to 32 A / 16 kW for the entire machine, higher power connection required for machines with grooving saw - Extraction as previously - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 unit (up to max. 40 mm workpiece thickness) Including pneumatic saw adjustment Separate pneumatic cutter adjustment, 1 unit, controllable from the operator panel (straight/radius) Buffing station (polishing mop), 1 unit Corner rounding cutter, 1 unit, including combination tool and pneumatic adjustment for chamfer/radius Maximum workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 unit, including pneumatic lift device, Radius R 2.0 mm Flat scraper, 1 unit, with pneumatic insertion control Glue station quick-change system in preparation, 1 unit, without second glue pot, including the ability to process PU adhesive with the machine, without glue discharge system underneath Special cleaning system for PU glue discharge underneath, 1 unit 60 mm panel thickness for machines with jointing, 1 unit; maximum workpiece thickness with jointing aggregate: 60 mm; jointing thickness: 40 – 60 mm; workpiece thickness up to 2 mm Special infeed fence for overloaded panels, 1 unit (16 mm and 19 mm thickness), maximum laminate overhang: 8 mm Separate extraction for jointing aggregate, 1 unit, directly at jointing cutter vertically upward, d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onwards Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Nesting for the combination milling aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Nesting for the radius scraper aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Release agent sprayer, 1 unit Cleaning agent sprayer, 1 unit, to facilitate removal of glue residue Antistatic spray device, 1 unit, mandatory for airtronic; antistatic coolant is sprayed onto the in

Condition: used, Year of construction: 2003, machine/vehicle number: KL 77/A20/S2, functionality: fully functional, feed rate X-axis: 20 m/min, total length: 9,000 mm, Equipment: documentation/manual, We are offering this used HOMAG Optimat kL 77/A20/S2 EVENT edge bander, year of manufacture 2003. Manufacturer: HOMAG Model: Optimat kL 77/A20/S2 EVENT Year of manufacture: 2003 Condition: used Type: edge bander Edge bander for sale due to purchase of a new machine. The machine is currently still in use and fully operational. It is a very robust machine, including a return system. Very stable and always delivers a perfect finish! Equipment: - Nozzles - Format cutters, 100mm diameter - Blow-off unit - Preheating unit - PUR bonding with cartridge heating station - 7 pressure rollers - Crosscut saws, straight and mitre - Top and bottom roughing cutters - Profile cutters, radius 1/2mm - Profile/flat scrapers - Nozzles - Polishing brushes - Machine equipped with top and bottom belts (very stable design) - Height adjustable at the front (automatic) - Profile cutters automatically adjustable via the program - Crosscut saws automatic - All functions can be switched on/off via the front screen - Return conveyor operated from the PC ->Demo available upon request! Price to be discussed via private message. Please do not hesitate to contact me if you have any questions. Cgsdpfjyw N Apjx Acver If you have any questions or require further information, feel free to send us a message or give us a call.

Year of construction: 1990, condition: used, edge heights: 10 - 60 mm Cjdps T T Ddofx Acvjgr edge band material thickness: 0,4 - 25 mm electr. connection: 380 V, approx. 9,9 kW space needed: 2900 x 870 x 1320 mm weight: 780 kg

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 9 m/min, total length: 4,400 mm, total width: 685 mm, Equipment: CE marking, documentation/manual, SCM Olimpic K 230 evo edge banding machine in excellent condition. Bought new, first owner. All documentation and tools are included. Cgjdpfx Aceyxhqnsvor Extraction pipes with branches are included up to the shut-off valve. Extra set of diamond pre-milling tools. Additional options: - Rounding unit - Nesting sensors - Riepe bottles at 3 positions - Glue scraper unit Technical data: - Feed speed m/min: 9 - Panel thickness mm: 8 – 60 - Edge band thickness in strips mm: 0.4 – 3 - Edge band thickness on roll (incl. covers) mm: 0.4 – 3 - Max. cross-section edge material for cutting mm²: 135 - Roll holder diameter mm: 780 - Max. edge band overhang vs. panel mm: 4 (2 – 2) - Min. distance between 2 panels mm: 700 (600*) - Min. panel length (minimum width 100 mm) - With edge band in roll or strips mm: 160 (140*) - With solid wood strips mm: 220 (140*) - Min. panel width with edge band on roll (min. length 210 mm) mm: 90 - Working height of the machine mm: 900 - Width of fixed panel support mm: 500

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Machine completely overhauled: - New Glue Jet 301 glue application system (top part 1 mm) - All units inspected - All milling cutters resharpened - All knives replaced - Feed speed: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrically adjustable feed motor: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy saving function - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802: - 2 x 2.0 kW, 200 Hz, 12,000 rpm with 2 jointing units for panel edge jointing - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit - Diamond cutter, Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit - Edge feeder 1901 fully automatic - Glue application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - Granulate hopper - Pressure unit 1913 MOT - End trimming unit 1918 (60 mm) pneumatic - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profile milling unit 1833 MOT4: - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2: Cjdpfx Ajwka Iiecvegr - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Edgebanding machine with jointer and corner rounding unit Very well-equipped and hardly used edgebanding machine in robust construction, ideal for precise and efficient edge processing in woodworking trades. Equipment: • Jointer unit with 2 counter-rotating diamond cutters • Edge feed for coil and strip material • Glue unit with glue roller • Pre-end trimming unit (roller) • Pressure unit for optimal pressing • End trimming unit with pulling trimming cut • Flush and radius milling unit • Corner rounding unit for end edges • Radius scraper unit • Surface scraper • Polishing unit Csdoyx Ew Espfx Acvegr • Manual unit adjustment • Control panel with LCD display and keypad • Extendable workpiece support Technical data: • Edge thickness: 0.4 – 5 mm • Workpiece height: 8 – 60 mm • Min. workpiece width: 70 mm • Min. workpiece length: 140 mm • Feed speed: 11 m/min • Extraction port: 120 + 2 × 80 mm • Weight: approx. 990 kg • Approx. dimensions (L × W × H): 4550 × 1550 × 1100 mm

Condition: used, Year of construction: 2016, Central pneumatic valve manifold, bus-controlled. Optimized maintenance unit with pressure sensor. Additional control air supply and pressure build-up valve. Chain feed with 2 feed speeds: 12 and 20 m/min. Drive motor 2.2kW (S6). Minimum workpiece length 140mm. Minimum workpiece width varies depending on workpiece length, height, and surface condition. 20 m/min feed is only possible up to a maximum edge thickness of 3mm and a maximum workpiece height of 25mm. When the corner rounding unit is selected, the speed automatically decreases to 12 m/min. Segmented, rubberized support pads with quick-change system. Minimum workpiece width varies depending on workpiece length, height, and surface condition. Electrically: 3x400V 50Hz. If a residual current circuit breaker (RCD) is upstream of the machine, it must be an all-current sensitive residual current device, type B, suitable for frequency inverter operation, with a tripping current of 300mA. End position damping for cross-cut saw unit. Jointing unit with plunge-controlled diamond cutters; speed 12,000 rpm, 4.4kW, max. cutting depth 3mm. Jointing cutter with diamond blades Z2+2, D-60 x 64 mm. e-Motion control. Extension frame for tempora 60.12. Machine base of the tempora 60.12 edgebander is made of thick-walled, electrowelded steel construction, featuring ribbing for high stability. Pneumatic-mechanical infeed lock for workpiece distance monitoring: a pneumatically controlled steel bolt prevents infeed of workpieces before the minimum distance is met. Prepared for retrofitting a pre-melter. Operating tools for tempora series. Workpiece feed and feed fence: the feeding support surface is designed as a roller bed for sensitive surfaces. The robust feed fence has a length of 1100mm. The jointing removal for the jointing unit is electrically position-controlled from 0-3mm at the feed fence and displayed via e-motion control. Upper pressure beam tempora 60.12E: made of welded, torsion-resistant steel construction. Motorized, controlled adjustable workpiece height from 8-60mm via e-motion control. Smooth, staggered, double-row upper pressure rollers ensure uniform pressure distribution on the workpiece. Workpiece distance monitoring with traffic light indicator. Spray application of separator agent. Cutter configuration 60mm Z3+3 'whispercut' tempora series. Glue application roller with reverse function. 50Hz rotary table — edge magazine for coil edge material 0.4-3mm. Ball bearing rotary table, diameter 800mm, for coil edge material. Strip magazine for 12 pieces of 10mm edges. Perfect 608: max. edge thickness 8mm. Edge feeding for coil and strip material, tempora series. Corner processing unit with motorized adjustment for post- and softforming profiles. Application-controlled profiling unit for machining end edges; edge thickness/workpiece height 10-60mm; min. workpiece length 270mm. Wood edges are possible only to a limited extent, depending on edge material. Restrictions apply for loose core layers on post-/softforming parts and extremely thin melamine/foil edges and surface materials. Pneumatically controlled, Teflon-coated glue unit for 1.5kg EVA granulate with synchronized glue roller and quick-change system. Suitable for processing PUR adhesive, taking adhesive processing guidelines into account. Codpeyx Iwbefx Acvogr

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Cgsdpfx Aoxy Tm Iecver

Condition: reconditioned (used), Double side - Stand-alone Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 3300 Numerical Control / Software ICOS open (Windows XP) Without Transmission bar (Master & Slave system) Adjustable feeding speed (m/min ) 7 - 35 Distance (center-axes) of the Disappearing Dogs (mm) 270 SIZING PART (for each side): Cgjdpfxeyyya Ds Acvjr Spraying unit (Anti-sticking liquid) Milling unit (joint Trimmer) 08.379 (2 X kW 4) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) VTG + 283.205 Pressure zone (N.C. adjustment) + Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit 08.42/30/B (2 X Kw 0,66) Max 30 m/min Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Multi-Profile Copying unit by N.C (fine and contour trimming) KFA 30 (1 x Kw 0,5 ca.) 30 m/min Profile Scraping unit 08.519 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (2 x Kw 0,18)