Used Rima for sale (167)

Year of construction: 2006, condition: used, RIMA RS 1012-s Compensating stacker Kjdpfxoyaq Iks Ag Uell short-term available

Condition: reconditioned (used), Year of construction: 2008, Stacker Kljdpfev Uy Ixex Ag Ujl with left hand delivery

Condition: used, Year of construction: 2001, Built in 2001 Size max 320 x 250 mm min 260 x 180 mm Klsdpfjc Idi Rex Ag Uel Pile height max 330 mm min 80 mm Infeed height max 890 mm min 860 mm Speed max 900 Pack./h

Condition: good (used), Year of construction: 2016, Built in: 2016 Length: 1,600 mm Width: 1,000mm Height: 2,200 mm Kodpfxsu R Rynj Ag Usll

Condition: ready for operation (used), Year of construction: 2011, Built in 2011 Kedpfxsd N D Npj Ag Usll

Year of construction: 2004, condition: good (used), Year of Construction: 2004 Ksdpfxoh Ir E Ee Ag Uell Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. Speed: 90.000 cph (product permitting) min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75") max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68") max pagination: 48p Product orientation: Spine leading Low Infeed Infeed height (min/max in mm): 600-1200 mm Waste gate Stream Aligner / Jogger Single squeeze roller Laser Counter, model: Baumer Scatec-1 Upper bin height in mm: 210 mm Upper Bin with 3 forks Turntable with compression plates max Stack height in mm: 330 mm Servo turntable Pneumatic pusher Delivery Direction to the right Delivery height in mm: 876 mm (34.50“) Air Delivery Table included Over all length equipment: 2650-2950 mm Over all width equipment: ~700 mm Over all height equipment: ~1800-1950 mm Input Power: 3 kVA, 50/60 Hz, 3 ~ Air requirement: 170 l/min 5.5 bar (6 cfm 80 psi) Weight: 945 kg (2100 lb) Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Mechanical / electrical machine test possible Condition: cleaned & in working conditions

Condition: good (used), Year of construction: 2008, Refurbished: 2008 Format: max 320 x 470 mm; min 133 x 152 mm Product thickness: max 96 pages 57 g/m² mm Stack height pre-stack basket: 127 mm Total stack height: 330 mm Infeed height: 470 - 1,146 mm Outfeed height: 876 mm Output: max 100,000 copies/h Equipment Kledpoqpgmcefx Ag Uel - Inlet with discharge - Double press - Infrared counter - Outfeed left - Outfeed conveyor

Year of construction: 2006, condition: good (used), Build in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 Klodpfx Ageh Itu Ee Uol - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request

Condition: good (used), Year of construction: 2007, Machine number: 338552-10 Built in: 2007 Size: max 320 x 470x 64 mm; min 102 x 152 x 7 mm Pile height pre-loading cage: 127 mm Klsdpfju R I Eusx Ag Ujl Pile height total stack: 330 mm Infeed height: 660 - 1.016 mm Speed: 15.000 c/h

Condition: good (used), Year of construction: 2003, Year of construction 2003 Size: max. 320 x 320 mm min. 133 x 152 mm Pile height: Max. 330 mm Kedpeu R Ulbsfx Ag Uell Speed: max: max. 100,000 ex./h

Year of construction: 1993, condition: used, Size max 470 x 320 mm Size 152 x 127 mm Kledpfxoc Rntns Ag Ujl Speed max 18.000 c/h Pile height 235 mm Pile height pre-loading cage 124 mm

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm Kljdpedyky Tjfx Ag Uel

Condition: used, Size max 470 x 320 mm Weight 520 kg (approx.) Kedpfx Aodrhpfsg Usll Speed max 18.000 c/h Equipment • - special: post code identification

Year of construction: 1998, condition: ready for operation (used), Built in 1998 Kodpfx Aedykhmog Uell Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,924 h, laser power: 3,000 W, travel distance Z-axis: 150 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information. • Working area (X × Y): 3000 × 1500 mm • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Drive system: CNC-controlled with brushless servo motors • Control unit: Prima Power CNC Touch Interface • Cooling: Water-cooled • Fume extraction system: Integrated • Total operating hours: 18,924 h Additional equipment Kledpfx Aox D Nyxsg Uol • Automatic pallet changer

Condition: ready for operation (used), Year of construction: 2023, This Prima Power Laser Genius + 1530 was manufactured in 2023. It features an 8kw laser with chiller, open cabins on both sides, safety glasses on doors, and a high-capacity dust collector. It includes advanced cutting technologies like NIGHT Cut, SMART Cut, and MAX Cut, plus an ATC automatic tip changer with 20 nozzle stations. Consider the opportunity to buy this Prima Power Laser Genius + 1530 fiber laser cutting machine. Contact us for more information. Additional equipment Klodpjx D Ebrefx Ag Uol • Laser with 8kw and chiller • Open Cabin with right and left side accessible doors • Safety glasses on the doors • NIGHT Cut for safer cutting and piercing process • SMART Cut for faster processing of thin material • MAX Cut for piercing process time reduction for thick material • Gas Mixer Cut • Nozzle check and OPC by camera • Adaptive cut • ATC automatic tip changer with 20 nozzle stations Machine Benefits Technical Machine Benefits • Dust collector for high production (3200m3/h) with 6 cartridges • Automatic selector for additional cutting gas • Uninterruptible power supply (ups) • Fleet manager remote care via tosibox • Interface to nt or automation connection • Interface for psr 2d Extra Information Machine still under power

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A Klodjkzpngjpfx Ag Uol -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: excellent (used), Year of construction: 2000, Control unit: Heidenhain TNC 426 Clamping area: 345x295 mm X=240 mm Y=240 mm Kljdsx Tqgzjpfx Ag Ujl Z=240 mm Speed range: 300-48,000 rpm

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fabrikat: Prima Power Kljdpfx Asmx Rrljg Usl Typ: Palatino 1530 Baujahr: 2012

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 180 mm, saw blade diameter: 550 mm, working height: 850 mm, We sell 1 x JRIMAC UKS 750 under-table cross-cut saw Cross cuts: 50x800 - 160x360mm - 170x250 Max. cutting height: 180mm Saw blade: 550mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield Kljdpefl Imaefx Ag Uel - Roller conveyors and stop systems on request

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 150 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC UKS 450 under-table cross-cut saw Cross cuts: 40x440 - 100x340mm - 160x120mm Max. cutting height: 170mm Saw blade: 550mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed Klodpferfudnox Ag Uol - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, cutting height (max.): 250 mm, working height: 850 mm, power: 7.5 kW (10.20 HP), We sell 1 x JRIMAC crosscut saw UKS 1.000 Kljdpfx Asrfudrog Uol Cross cuts: 60x940 - 140x820mm - 180x720 - 220x520 - 240x340 Max. cutting height: 260mm Saw blade: 700mm Working height: 850mm Bottom and top extraction sockets: 160mm - Infinitely adjustable, pneumatic cutting feed - hydraul. Brake cylinder for even lifting speed - Pneumatically controlled workpiece clamping device - cutting release via 2-hand control, with safety shield - Roller conveyors and stop systems on request

Condition: good (used), Year of construction: 2005, Longitudinal saw in very good condition from a Swiss operation max. cutting length: 6200 mm max. cutting width: 420 mm max. cutting height: 170 mm Klsdpox E Npljfx Ag Usl with laser with control system

Year of construction: 1998, condition: excellent (used), 1 x centrifuge Aryma / Rimann 2.5 LIT year of construction: 1998 with open basket in optical and technical perfect condition Technical data: Max. Charging: 3 Kg/2,5 l Kedpeigni Ijfx Ag Uell The machine can be viewed at any time with pleasure under power.

Condition: like new (used), Year of construction: 2017, KORIMAT KA 160 – Compact, versatile, indispensable. Kljdsx N S Ekepfx Ag Usl Completely overhauled with a 6-month parts warranty. Year of manufacture: 2017. Ideal for beginners and perfectly suited for spaces with limited room: The KORIMAT KA 160 stands out for its maximum efficiency in a minimal footprint. This handy all-rounder offers much more than just sterilization – as a compact kettle, it brews and cooks delicious specialties. Whether it's perfectly cooked cold cuts, scalded sausages, or classic sterilization, the KA 160 ensures every application is simple and reliable. Experience uncompromising quality and flexibility – for outstanding taste and maximum productivity. Performance / Power requirement: 9 kW / 400 V / 50/60 Hz Heating type: Electric Kettle material: Stainless steel V2A Kettle capacity: 120 liters Maximum operating overpressure: 2.5 bar Minimum circuit protection: 3 x 16 A Dimensions (W x D x H) in mm: approx. 800 x 1115 x 1900