Used Edgebanding for sale (820)

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support Lodpezb Idfefx Amrsac ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: excellent (used), Year of construction: 2018, Specification Length: 4605mm Workpiece Thickness: 40mm Edge Material Roll: 0.4 – 3mm Edge Material Strip: 0.4-3mm Feed Speed 8m/min Joint Trimming Unit 40mm Quick Change Application Unit Magazine for Coiled Material Pneumatic 2 point adjustment Pressure Zone End Trim Unit with Pneumatic Adjustment Pneumatic Adjustment Fine Trim Contour Trimming Unit Pneumatic Adjustment Profile Scraping Unit Ledpfx Amszdklcjreac Glue Joint Scraper Buffers LED Indoor Lighting EasyTouch Control System Manual Central Lubrication Manual Top Pressure Adjustment Roller Top Pressure

Condition: used, Year of construction: 2007, Here we have a Batch size one line capable of cutting strips down to length and edging either all four or just two sort edges Machines are Saw(Loading) Holzma Saw 0-242-06-7225 (Year 2007) HOP 11/16/32/X Loading Bargstedt 0-280-16-1695 (Year 2007) RTBP410/40/30/12 Edge Homag 0-202-41-3301 (year 2007) KFL 610/26/PU/25/S1 Loading Bargstedt 0-280-16-1696 (year 2007) RTBP410/40/25/12 Lodpfezgc H Rex Amrjac I have video of the line running just email me to send you them the machine has had a lot of money spent on it to make it run brilliantly

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) 2. Unit type: Gluing unit Lasdpfxjzdzmko Amrjc 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW Lajdpfx Amsrx S Ipsrec - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: good (used), Year of construction: 2010, machine/vehicle number: 0 - 251 - 20 - 4507, functionality: fully functional, Due to a switch to solid wood processing, this machine has been used very little and is in good condition. Available for viewing in the workshop. Lasdpjxzp Uwsfx Amrec

Condition: used, Year of construction: 2023, machine/vehicle number: Profi-HPP300/43/43, functionality: fully functional, operating hours: 4,134 h, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 3,200 mm, workpiece length (max.): 3,800 mm, HOMAG SAWTEQ S-300 profile line CNC panel dividing saw (Profi-HPP300/43/43) with a large touchscreen and a maximum speed of 150 m/min. Specifications Manufacturer: Homag GmbH (Germany) Type: SAWTEQ S-300 profile line Design: CNC panel saw Configuration: Profi-HPP300/43/43 Year of manufacture: 12-2023 Serial number: 0-240-87-3107 Control: large touchscreen Lsdpfjzd Dlisx Amrjac Capacity/max.: 3,200 x 3,800 x 5,600 mm Speed: 150 m/min CE: yes Design/features Clamping bar Additional loose blades Ball-roller table with air jets Dust extraction pipes Receipt printer Homag/Pica Machine manuals available Recorded operating hours: Number of cuts: 31,843 Operating time: 4,134.18 hours Main operating time: 587.18 hours Condition Used Has already been professionally disassembled and moved by Kisjes Transport Apeldoorn (using a combination vehicle). Dimensions Assembled: 645 x 831 cm Photos Photo 1 to 21: assembled installation at its original location Photo 21 to 51: disassembled installation at the current storage location Auction information

Condition: excellent (used), Year of construction: 2000, Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2000 • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Working range: • Workpiece thickness: approx. 10 – 50 mm • Edge thickness: approx. 0.5 – 3 mm • Minimum workpiece length: approx. 250 mm Lsdpfxozbyvas Amreac • Minimum workpiece width: approx. 70 mm • Feed rate: approx. 10 m/min • Compressed air connection required (approx. 6–7 bar) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2001, Workpiece thickness min./max.: 6/45 mm Edge banding thickness: 0.4 - 3 mm Edge banding height max.: 51 mm Edge banding strip length min.: 350 mm Edge banding overhang in height per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Overall length: 3700 mm Ljdpfx Amey Dd Iyorjac Width: 1440 mm Height max.: 1970 mm Workpiece infeed height: 850 mm Weight: approx. 850 kg Storage location: Nattheim

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication Ljdsy Hyl Topfx Amreac - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Year of construction: 2023, condition: good (used), Edge banding, edge banding, veneer roll -Manufacturer: Rehau, edge band Raukantex 3 rolls Laedpfx Amot Uwxworoc -Type: Raukantex FP 28/1 97556 -Color: gray -Dimensions: 28 x 1 mm -Carton: Contents 3 rolls x 100 m -Quantity: 1 boxes available -Price: per carton -Carton dimensions: 490/490/H100 mm -Weight: 9.2 kg/carton

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam Lsdpjx S Hmzjfx Amrsac - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: used, machine/vehicle number: 006619, Position 1: Panel Feeding and Loading IMA + MEINERT-COMBIMA/I/R75/2050 Position 2: Double Squaring Machines IMA + MEINERT-COMBIMA/I/R75/2050 Lajdeqy Em Nepfx Amroc Position 3: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 4: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 5: Roller Conveyors IMA + MEINERT-COMBIMA/I/R75/2050 Position 6: Single Edgebanders IMA + MEINERT-COMBIMA/I/R75/2050 Position 7: Panel Turning Device IMA + MEINERT-COMBIMA/I/R75/2050 Position 8: Panel Stacking and Offloading IMA + MEINERT-COMBIMA/I/R75/2050

Condition: used, machine/vehicle number: 008627, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Laodjzakdfepfx Amrjc Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: PUR Premilling Unit: yes Corner Rounding Unit: yes Lodpfjx A Tgyox Amrjac Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: good (used), Year of construction: 2011, Single-sided edge banding machine in right-hand configuration with workpiece return, Ledpfszb Iuqjx Amrsac for hot melt or/and PU gluing, used, manufactured in 2011; approx. 8700 operating hours Edge thickness: 0.4 – 10 mm Workpiece dimensions: Width min.: 70 mm Height min.: 8 mm Height max.: 60 mm Length min.: 150 mm Feed speed: 14 – 20 m/min, stepless Glue application: Glue application roller with Vario-melt metering system Working height: 900 mm Machine dimensions: Machine height: 1,600 mm Machine width: 1,100 mm Machine length: 8,200 mm Machine weight: 4,000 kg Machine equipped with: -Double roller pressure with electronic positioning -Pneumatic control of all units from the central touch screen control via Beckhoff industrial PC -CM – CombiMelt gluing system: Processing units: -Fk -JOINT PROCESSING UNIT for attaching chipboard with 2 HF motors, 2.2 kW, 200 Hz, 12000 rpm, operating in forward and reverse direction, length-controlled. Tool: DIA joint set Ø 85 x 45 x 30, z 3, for board thicknesses up to 42 mm -AKM – Edge magazine for the automatic feeding of strip edges, with spiked roller feed and pneumatic. pressure bar. Including optical edge monitoring -M4+1 – Four-fold magazine, automatic roller retraction. For holding four edge rolls. With variable edge shaft for interchangeable edge. With automatic selection menu. -K 13 – DOUBLE TRIMMING UNIT with 2 HF motors 0.6 kW, 200 Hz, 12000 rpm, motors and saw blades pneumatically adjustable 0/5° -K 160 2 HM saw blades 140 x 3.2 x 16 mm, Z 36 -Bfc – FLUSH TRIMMING UNIT for pre-trimming the glued edges in the reverse direction. Sensing on one side, feed via program control. 2 HF motors 0.7 kW, 200 Hz, 12,000 rpm Tool: 2 HM – reversible cutting heads Ø 70 x 20 x 16 mm, z 4 (HF70). -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM reversible cutting heads Ø 70 x 20 x 16 mm, Z 4 (HF70), can also be fitted with radius tools -HFt – FINE TRIMMING UNIT for radius trimming of the glued edges in the reverse direction. Sensing on both sides, automatically adjusted to edge thickness via program control. With 2 HF motors 0.3 kW, 200 kW, 12,000 rpm Tool: 2 HM radius reversible knife heads (AR 73), Ø 73 x 16 x 16, z 3 for reversible inserts R 1 – R 3. -AKF – Automated COPY MILLING with two separate working spindles for top and bottom. 2 HF motors 0.37 kW, 200 Hz, 12000 rpm Tool: 2 PCD diamond radius tools Ø 73 x 13 x Ø 16. With integrated extraction. -AZK 4 – autom. operated SCRAPE BLADE CHANGING UNIT -ZKf – SURFACE SCRAPE BLADE UNIT with fine sensing device for removing residual hot melt adhesive in the joint area – with extraction. Additional equipment: -AS – Antistatic spray device, double, on glue joint -GS Lubricant spray device for spraying antistatic lubricant onto the edge surface, electronically controlled -RS – Cleaning set with 4-fold spray device and fine wiping device for cleaning the surface -KEO-c – EDGE CLEANING, oscillating and automatically adjustable. 2 motors 0.2 kW, with 2 cloth disks -WE – Angle insertion aid as a sliding carriage, foldable. For narrow parts. Interface for workpiece return Ligmatech ZHR 05 or comparable

Condition: used, machine/vehicle number: 007841, X axis working area: 4200 mm Y axis working area: 1200 mm Lajdpfxoyg Ef De Amrsc Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 4 axes Maximum edge height: 64 mm Total number of tool changer positions: 18

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Model: ME 25 - CE Standard Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Laedpfx Amjzfapmjrsc Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Min/max panel height 12/50 mm Panel feed speed 7 mt/min Work surface height 904 mm Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Glue scraper unit for removing any excess glue Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Ledpfszc Ilxsx Amroac

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, operating hours: 7,610 h, input voltage: 400 V, input current: 10 A, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, TECHNICAL DETAILS Overall height: 1,650 mm Overall length: 4,400 mm Overall width: 1,000 mm Color: Gray Operating hours: 7,610 MACHINE DETAILS Weight: 2,500 kg Year of manufacture: 2018 Documentation available: No CE marking present: Yes CE certificate available: No Serial number: Itsbn Dztwjy Ewv Tj Tsg Lajdpjy Tnuvjfx Amrec Voltage: 400 V Power consumption: 10.3 A Fuse: 16 A Transport dimensions: 4,400 mm x 1,000 mm x 1,650 mm (l x w x h) Transport weight: 2,500 kg Transport packages: 1 EQUIPMENT Pre-milling unit Gluing unit Pressure rollers Cutting unit Rough milling unit Radius pulling unit Corner rounding unit Surface pulling unit Brushing unit

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, power: 18 kW (24.47 HP), workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, height adjustment type: electric, actuation type: electric, overall weight: 3,000 kg, Equipment: CE marking, OTT Tornado + Like new, with belt-driven pressure system Full equipment including TextureFinish Narrow parts package Spray system for PUR processing Lodpfx Aezcb Dhomroac Free space for, e.g., a grooving unit Overhang milling cutter for increased edge material Horizontal cutting unit Solid wood edges up to 15 mm Inspection by appointment.

Condition: used, Year of construction: 2013, Gluing, edge trimming, combination milling, flat pull blade, max. edge thickness: 3/8 mm, max. workpiece height: approx. 40/50 mm, min. workpiece length: approx. 250/300 mm, min. workpiece width: approx. 70 mm, feed rate: approx. 10 m/min, ready for operation: approx. 6 min, power consumption: 6.5 kW, drive system, working height: 880 mm, dimensions: 3600 x 1300 x 1500 mm, weight: approx. 660 kg. Storage location: Supplier. Lajdpozcw Amefx Amrsc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a used BRANDT KDF 440 C edge banding machine from the HOMAG Group. Year of manufacture: 2017 Edge trimming unit Gluing unit Pressure zone Cutting unit (2-motor) Multi-stage trimming unit Profiling and corner copying unit (1-motor) Profile and flush trimming blade Jointing unit Lsdjzc D D Dopfx Amrjac Feed rate: 14 m/min EVA & PUR compatible PowerTouch control system PU pressure rollers Few operating hours Available from June 2026 In very good condition.

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction Ljdpfoymyp Rex Amrsac - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: used, machine/vehicle number: 007357, Position 1: Panel Feeding and Loading BIESSE - RBO-STREAM SB2 9.5 Lasdpfxowuz Rte Amrsc Position 2: Double Sided Squaring/Edgebanding Machines BIESSE - RBO-STREAM SB2 9.5 Position 3: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 undefinedPosition 5: Panel Turning Device BIESSE - RBO-STREAM SB2 9.5 Position 6: Panel Stacking and Offloading BIESSE - RBO-STREAM SB2 9.5