Used edgebanders for sale (599)

Condition: used, Year of construction: 2013, Used machine Hodpfxjzlbpzo Ahnofi Year of manufacture: 2013 Equipment and technical data: - Machine completely overhauled: - new Glue Jet 301 adhesive system (upper part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - Feed rate: 10 - 18 m/min - Workpiece length: min. 160 mm - Workpiece width: min. 60 mm - Workpiece thickness: 8 - 60 mm - Edge thickness: 0.4 - 8 mm - Electrical system for stepless feed: 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control unit with 15-inch touchscreen - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointer unit 1802: - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 jointer units for joining the edge of the board - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointer unit - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointer unit - Edge feeder 1901, fully automatic - Glue application station Glu Jet GJ301, automatic: - 2.3 kW

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Hjdpfxozku Rpo Ahnefi Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Used edge banding machine HOLZ-HER Streamer 1057 Availability: End of July 2026 Year of manufacture: 2016 Jointing cutters Corner copying unit Hodeziwrajpfx Ahnofi Profile and straight-edge blades

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Used edge banding machine FORMAT 4 Tempora F600 60.06L - Available at the end of September 2026 - Year of manufacture: 2020 - advantEdge technology for perfect zero-gap joints - smartTouch control system - Joint milling - Dual-motor double rounding unit Hfjdpfx Aeziwqvohnsi

Condition: ready for operation (used), Year of construction: 2019, Edgebander manufactured in 2019. This SCM Olimpic K 560 features a feed speed of up to 18 m/min and is equipped with a 7" color touchscreen control for easy operation. It includes a 2-motor Round X rounding group for corner rounding and trimming, along with various optional groups for enhanced functionality. If you are looking to get high-quality edge banding capabilities, consider the SCM Olimpic K 560 machine we have for sale. Contact us for further details. Key features • Feed speed up to 18 m/min with 600 mm panel spacing, even with corner rounding • Touch 7 color touchscreen control with graphics, program management, diagnostics, and digital glue temperature control • 2-motor Round X corner rounding group for corner rounding and trimmingTechnical specifications • Feed speed: 12–18 m/min • Workpiece thickness: 8–60 mm • Edge thickness (roll): 0.4–3 mm • Edge thickness (strip): 0.4–6 mm • Max edge cross-section (roll): 135 mm² Hjdpfozgcl Tox Ahnjfi • Max roll diameter: 800 mm • Edge overhang: 2 mm top / 2 mm bottom • Workpiece spacing: 600 mm • Min workpiece length: 140 mm • Min workpiece width: 95 mm (60 mm with special setting) • Minimum length (roll material): 180 mm • Minimum length (strip material): 220 mm • Opening of workpiece pressure bar: 560 mm • Working height: 900 mmControl system (Touch 7) • 7" color touchscreen (16:9) • Graphical display and simulation of all units • Control of all units and automatic start functions • 60 freely editable programs • Full PLC control with encoder monitoring • Digital glue pot temperature control • Diagnostics with operator assistance • Statistics: piece counts, edge meters, chain runtime • Pass selection: first or second processing passProcessing units • Joining milling: two diamond jointing cutters, 1.8 kW each, 12,000 rpm • Glue unit VC-S4.1: 3 kW heating, 1.5 kg tank, Fastlock quick-change, motorized main + three pressure rollers • Trimming unit K/SEL: two HF motors 0.35 kW each, 12,000 rpm, swivel 0–15° • Flush milling unit R-K: two HF motors 0.55 kW each, 12,000 rpm, tool radius R2 • Round X corner rounding: two HF motors 0.35 kW each, 12,000 rpm, backlash-free precision guides • Scraper unit RAS-K: tool radius R2 • Polishing unit SP-V: two motors 0.18 kW each, 3,000 rpm Additional equipment • Autoset T-ER2 automatic changeover: • Switching between first and second passes • Automatic edge thickness change (e.g., 0.4 mm to 2 mm) • Release agent/anti-adhesive spray system AAR • Glue scraper unit RC-V • H=64 mm diamond tools for rectifying/pre-milling group

Condition: used, Year of construction: 2007, machine/vehicle number: 3750, functionality: fully functional, The machine applies adhesive to solid wood up to 18.0 mm thick and rolled materials up to 3.0 mm thick. It also applies edge banding from rolls, 3.0 mm thick PVC, ABS, and real wood up to 2.0 mm thick. It features edge trimming at 18 mm. Hjdpoigad Eofx Ahnefi Rounding and bevel milling stations are included. Total length: 3.20 m. Power consumption: 7.1 kW. Includes an adhesive tank. Equipped with an edge trimming shear. Features stepless feed. A miter saw is included for front and rear edges. A flush trimming unit is included. A rounding milling unit is included. Equipped with a chassis. Dust extraction connection: 100 mm.

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Hfsdpfonxkm Esx Ahnji Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 558/0-112, functionality: fully functional, Weight approx. 1950 kg Control panel 1888 Pre-milling unit 1961 Edge feeder 1901 Sensing nozzle Hjdpfx Ahsh Uyg Eonjfi Printing unit 1913 MOT Cutting unit 1918 Milling unit 1942, top Milling unit 1942, top/bottom for rounding Pull blade 1929 Contour milling unit 1983 Surface pull blade 1964 Smoothing unit 1944 Length approx. 5900 mm Connected load 21.4 A

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Hfjdpfxsyf I T Uo Ahnoi Scraper knife

Condition: used, Year of construction: 1988, machine/vehicle number: 387/8-84, functionality: fully functional, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 51 mm, height adjustment type: mechanical, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,280 mm, total length: 3,750 mm, total width: 850 mm, overall weight: 756 kg, Equipment: CE marking, documentation/manual, Mode of operation: hot/cold process, one-sided left Edge band thickness: 0.4 - 8 mm Maximum edge band height: 51 mm Workpiece dimensions: width min. 50 mm, length min. 180 mm, thickness min. 6 mm Feed speed approx. 11 m/min Glue application via blade nozzle End trimming Flush trimming – tiltable up to 15 degrees Radius trimming – tiltable up to 15 degrees Buffing unit Compressed air requirement: 6 bar Hfodpfsy Dh D Eox Ahnsi

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Rated power: 380V, 21A Edge magazine Gluing station 1906 Printing unit 1914 Cross-cutting saw unit 1976 Hodpfeiamufsx Ahnofi Routing unit for rounding 1943 Rounding cutter blade 1927 Sanding unit 1944 Control panel (located) on top Dust extraction nozzle, D = 100 mm Operating manual No quick-change unit for flush trimming

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 315/0-110, functionality: fully functional, Control panel, top Edge feeder 1902 Glue application station 1906 Cutting unit 1902 Printing unit 1816 Cutting assembly 1918 Milling assembly 1942M Rounding draw knife 1929 Form milling assembly 1983 Hfjdsh Ux Suopfx Ahnsi Surface draw knife 1964 Smoothing assembly 1940 Weight approx. 970 kg Compressed air connection, 6 bar Extraction connection, Ø 120 mm Length approx. 5300 mm

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW Dust extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Hfodpsiw D Udsfx Ahnsi Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, strip material 3 mm Edge magazine 1301 with DAZ 11 Gluing station 1906 Pressure unit 1914 Cutting unit 1976 Flush trimming unit 1942 Radius R2 trimming unit 1943 Scraper blade 1927 Smoothing unit 1944

Condition: new, Year of construction: 2026, functionality: fully functional, Precise and clean edge processing without the need for extensive post-processing of the workpieces. The corner profiling unit handles the final corner processing. With a compact design of only 3.60 m in overall length, even short workpieces of just 120 mm (200 mm with corner rounding) can be processed professionally. Equipped with a joining unit with 2 diamond-tipped joining cutters, a Teflon-coated gluing unit, a pre-trimming unit, an HF miter saw station (motor with 2 saw blades), an HF combination milling unit, and an HF corner profiling unit. Controlled via a rotating 10-inch color touch screen. Special accessories included: • Radius scraper blade • Surface scraper blade • Cleaning spray unit Hedpfx Ahjza D S Asnjfi • Anti-stick spray unit

Year of construction: 1990, condition: used, Power connection: 400 V, 3 kW Glue roller Hodpfjkkfk Njx Ahnefi Milling unit: 2x flush-cutting Suitable for edge banding up to 0.4 mm Dimensions (L x W x H): 3150 x 680 x 1250 mm Weight: approx. 400 kg Conversion to 2 mm PVC edge banding possible = additional cost of €1,000.00

Condition: not inspected (used), Year of construction: 2006, for coil and strip material from 0.4 - 15 mm max. panel thickness 60 mm max. edge overhang 66 mm large magazine table, D = 820 mm transport chain with automatic lubrication idler roller for shortest workpiece sequence safety/soundproof hoods central dust extraction connection, D = 160 mm, edge trimming units, D = 120 mm chip collection box, D = 100 mm equipped with: > Edge trimming units 1961 incl. DIA cutter > Memory-programmable screen control Edgecontrol > Automatic edge magazine 1901 for coil and strip material > Gluing station 1905 for cartridges + granules incl. sensing nozzle > Pressing unit 1926, motor-driven/pneumatic > Cutting unit 1819, motor-driven > Flush trimming unit 1962 > Multi-function trimming unit 1966 with various radii/chamfers > Multi-radius draw blade unit 1965 with various radii > Corner copying unit 1983, R = 2 mm incl. one interchangeable motor, R = 1 mm > Straight draw blade 1964, controlled by program > Deburring unit 1944, controlled by immersion > Spray device 1856 at the infeed and outfeed > Belt bridge > stepless feed rate up to 24 m/min > Shear arm > motor-driven bridge adjustment > infeed guide rail, motor-driven adjustable Length 8200 mm Hfjdpfx Aoy Ici Rshnei Width 1300 mm Height 2000 mm Weight 3300 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Hfedpoyzxa Ejfx Ahnji Return system TFU140

Condition: good (used), Code: 0435 Brand: FELDER - AUSTRIA Model: G 560 - CE Standard Automatic edge bander with grinding units for applying wooden, abs, pvc, veneer edges to joinery, furniture, custom-made furnirture, panels, doors, kitchens and other items – CE Standard Technical data: Edge thickness 0,4–5 mm Min/max panel height 10/60 mm Workpiece feed speed 9 mt/min Configuration: Adjustable infeed guide Set of 2 diamond infeed grinding units for perfect panel grinding Tool diameter 60 mm Bore 25 Tool height 60 mm N° 4 cutting edges Rotation speed 12000 rpm Motor power 1,1 Kw each Gluing unit Pvc shears End cutting unit: Blade diameter 100 mm Bore 20 – Blade inclination 0-5°– Blade rotation speed 12000 rpm End trimming unit: Tool diameter 77 mm Bore 20 – Rotation speed 12000 rpm Edge scraper unit Glue scraper unit to remove any glue residue Hfsdpfx Ahezkhlgjnsi Touchscreen control panel Support table for large panels Soundproof protection cabin Suction inlets: 1 Ø 120 mm – 2 Ø 80 mm Compressed air 6–7 atm Overall dimensions mm 3200 x 900 x 1500 mm Weight kg 900

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Hfedpfxoxy Tm Ie Ahnei

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Condition: refurbished by Holz-Her specialist Equipment and technical data: - Basic machine with manual pressure bridge adjustment - Extendable workpiece support, distance: 600 mm - Edge milling unit FG 201 with 2 milling heads including diamond milling cutters 70 x 48 x 30 mm Z 2 - Edge feeder 1903, single-feed, automatic transport of roll and strip material - Glue application system Glu Jet GJ 301 with automatic glue height adjustment (sensing nozzle) - With magazine for glue cartridges - Pressing unit 1912-3, pneumatic, first roller driven with pneumatic immersion control - Cutting unit 1918, pneumatically swiveling 0-10 degrees - Multi-function milling unit 1827 MOT 4 with pneumatic package including diamond milling cutters - Profile milling unit 1832 for corner copying with radius milling cutter - Trimming blade unit 1929 MOT 2 - Chip collection box - Surface trimming blade FK 701 - Scraper unit 1940 - Minimum workpiece length (mm) 160 - Workpiece thickness (mm) 6-60 - Edge thickness (mm) 0.4-6 Hsdpfxszk N U As Ahnofi - Feed speed (m/min) 10 - Overall length (mm) 4930 - Weight (kg) 1420 Availability: short notice Location: 63934 Röllbach

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 Hfedpfow Nad Hex Ahnoi For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: used, Year of construction: 2011, Used machine Year of manufacture: 2011 Condition: Machine completely overhauled and serviced Equipment and technical specifications: Infinitely variable feed speed: 10–18 m/min Edge Control 19 control system with 18.5" touchscreen color display Jointing milling unit Edge feeding Cartridge adhesive application station with sensing nozzle and automatic glue height adjustment Pressure unit End trimming unit Multifunctional milling unit Corner copying unit Radius scraper unit Surface scraper Buffing unit Workpiece thickness: 6–60 mm Edge thickness: 0.4–8 mm Minimum workpiece width: 60 mm Hsdpfx Ahowka N Tensfi Shortest workpiece length: 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: short notice

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. Hjdpfx Aowkba Tehnjfi - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2008, Used machine Year of construction: 2008 Edge thickness PVC: 0.4 - 2.0 mm Panel thickness: 10-45 mm Edge banding from roll automatic cross-cutting unit Flush trimming unit for flush and radius milling, r = 2 mm Motor 0.37 kW - 9000 rpm Extraction connection: 2 x 60 mm Heating capacity approx. 1150 W Total power 2 kW Hfedexppwbjpfx Ahnoi Weight approx. 240 kg Dimensions 2040 x 1240 x 1260 mm Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Compact and flexible in the smallest of spaces. Workpieces receive their finish within a length of just 2.13 m. Equipped with a 1.1 kW high-frequency motor joining unit and diamond-tipped spiral joining cutter, Teflon-coated glue unit, pre-end trimming unit, and HF multifunction milling unit. Two free slots for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Minimum workpiece width: approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height max.: workpiece height + 4 mm (2+2) Electrical connection: 400 V Total connected load: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Hfjdpjy Eizzefx Ahnoi Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term