Used Mulchers for sale (30)

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. Gjdpfx Aou Ruruoacjkc - 5-position cutting height adjustment. - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. - Engine permanently mounted; cannot be rotated. - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. - Standard machine-mounted safety features with alarm functions: - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Condition: used, Year of construction: 2023, Amazone Trailed Mower Grasshopper SmartCut GHS 1800 Drive, year of manufacture 2023! ----* Manufacturer: Amazone * Model: GHS 1800 Drive * Year of manufacture / model year: 2023 * Unladen weight: approx. 1,130 kg * Including PTO shaft * Very good condition * Ex-demonstration unit / hardly used * 1 x spare blade kit with mountings * More photos available upon request Gjdjxbmxajpfx Aacjkc * Price: 17,900 EUR, net + 19% VAT ---- For further questions please call: For more information please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information provided without warranty or guarantee; errors and prior sale excepted.

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm Working Width, Ideal for Heavy-Duty Mulching! The Brugger FMP 225 is a robust forestry mulcher designed for use in agriculture, forestry, and on fallow land. Featuring a dual belt drive, 36 carbide-tipped blades, and hydraulic equipment, it is perfect for tractors from 110 HP upwards – reliable, high-performance, and ready for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Dual belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 HP Weight: approx. 1,800 kg Hitch: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with blades) Blades: 36 pieces, carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-position adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for rear flap, 1x for roller) Features: Hydraulic rear flap & roller Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = 10,900 EUR Brugger FMP200 200cm – 32 hammers, 1,700kg = 11,900 EUR Brugger FMP225 225cm – 36 hammers, 1,800kg = 12,900 EUR ----- Gkodpfxowhyzwe Aacoc Contact us for a tailor-made offer!

Condition: used, Year of construction: 1988, Janssen biscuit machine with 2 biscuit rollers for Speculaas and Kipfel. Includes 10 baking trays. The machine has been overhauled. Stainless steel frame on wheels. With heating for the rollers. Tray width: 25 cm; lengths: 1 m, 80 cm and 60 cm. Godpfx Asw T Rxcsacjkc

Condition: new, Year of construction: 2021, New Maschio-Gaspardo mulcher Gedpfxskplwto Aacskc * Connecting rod to the PTO ----* Own weight: 331 kg * Year of manufacture: 2021 ----Vehicle number 6399 -----Subject to errors and prior sale

Condition: used, Year of construction: 2022, operating hours: 1 h, As-new telescopic mulcher, hydraulically adjustable upwards and downwards, working width 1.40 m. Gjdpjw Ikkuefx Aacjkc

Condition: new, functionality: fully functional, Year of construction: 2022, working width: 5,000 mm, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2,100 kg. Driven via a PTO shaft with 540 rpm. Gjdpexlf Hwofx Aacskc - Maximum horizontal reach: 5.00 m - Independent hydraulic system (46 l/min, 210 bar) - Drive shaft - Hydraulic collision protection - Hydraulic swing arm - Float position for swing arm - Float position for mowing rotor - Stabilization kit for three-point linkage - Bowden cable control Flail rotor 1000 - Central mounting - Direct drive - Working width: 1.00 m - Weight approx. 140 kg

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 10 h, working width: 130 mm, A drum mower for Irus Deltrac 2.0 is being offered for sale. Hardly used, immediately ready for operation! Gedpfxow N Ruio Aacokc

Condition: used, Used vehicle Mulag mower MHU 800 Bj2000 , with mulching head , drive via hydraulics , operation via 2x joystick consoles , 4x parking supports , sale by customer order - subject to prior sale and errors - sale only to traders or export - vehicle no.: - Godeup Nw Ijpfx Aacokc

Condition: used, Year of construction: 2010, Rear attachment Hydraul. Side shift Support roller Freewheel in drive train / PTO shaft VAT NOT DISCOUNTABLE / Gkedpfx Aaoual Ucecsc

Condition: new, Year of construction: 2021, The McConnel barrier mower is a hydraulic driven mowing machine, with an independent PTO operated system. The equipment can be attached to the tractor simply with a 3-point hitch, both front and rear, or DIN plate, and can work on both right and left side by simply reversing the cutting discs. Godpfxjh Hurkj Aacskc Builted on a sturdy tubular frame with a total weight of 1500 kg, it is equipped with two side arms that open up to overcome road guardrails, steel cables and hedges of a maximum height of 170 cm, and is able to cut simultaneously from both sides and underneath the obstacle with a cutting width of about 150 cm. The great versatility and working speed of the machine partly depend on the possibility of opening the external arm 180°, permitting a fast and easy positioning and, most of all, enabling the machine to continue mowing with the internal disc while the external one, by lifting up, can pass over road or advertising signs that may be present along the way, while automatically interrupting the rotation of the blades. Energreen Raiber

Condition: used, Year of construction: 2024, PTO shaft Walterscheid W2480- / Gkodpfx Aoud H Hheacec

Condition: used, functionality: fully functional, Year of construction: 2008, working width: 7,700 mm, color: yellow, empty load weight: 2,045 kg, machine/vehicle number: M0814158, Equipment: hydraulic folding, lighting, onboard computer, McConnel PA7700T with Midcut package: extension arm shifted 1.0 m forward. Supplied complete with 1200 cutter bar with belt drive. Machine is suitable for axle mounting – tractor mounting brackets are custom-made to fit your tractor (not included in the price). Gkodew I Dn Hepfx Aacoc The machine is in good technical condition and ready for use.

Condition: used, Year of construction: 2015, Unladen weight 938kg Transport width 2.65m PTO shaft hydr. displacement / Gkodpjucqbasfx Aacjc

Condition: used, Year of construction: 2018, Headstock for front and rear attachment Hydraulic side shift / support roller Counter blade Special black paint finish Skid shoes PTO shaft / Gedjual S Ujpfx Aacskc

Condition: used, Year of construction: 1993, Hydraulic side shift Trailing roller PTO shaft / Gksdpfx Aasual S Ijcjc

Condition: used, Rear attachment Hydraul. Side shift PTO shaft Roller with scraper / Gkodpfoual Szex Aacsc

Condition: used, Year of construction: 2023, ZW Walterscheid W2480-SD25.196 / Gedpfx Aaet R R Tmscekc

Condition: used, Year of construction: 2023,

Condition: used, Year of construction: 2023, PTO Walterscheid ZW Walterscheid W2480-SD25.196 / Godpst R R T Hsfx Aacskc

Condition: used, Year of construction: 2022, Double trestle Hydraulic side shift 5 58 cm Protective rubber cpl ZW / Walterscheid W2500-860mm / Gjdpfxjt Hfw Se Aacekc

Condition: used, Year of construction: 2023, Side mulcher hydr. side shift PTO Walterscheid without clutch / Gkedpfet Hd T Ejx Aacoc

Condition: used, Year of construction: 2024, Side mulcher PTO Walterscheid W 2480- / Gjdst A Sncjpfx Aacjkc

Condition: used, in standard equipment for rear mounting Working width 280 cm / Gjdjtyw Azspfx Aacokc

Condition: used, Year of construction: 2023, 1,385 kg Working shaftVario with width S / PTO speed 1000 rpm PTO shaft W 2400 / both sides 1 3/8 inch Z6 length 1810 ( 31 / hydraulic embankment mulcher / linear lateral adjustment - hydraulic cylinder adjustment / hydraulic height adjustment of mulching head Godpfx Aaotvgtxocekc