Edge banding machine

BMS - Blaich Kantenfix B2

Condition: used, Weinig Profimat 22 with 4 spindles. Left mobile tree with measurement sensor, for automatic shifting based on the width of parts entering processing. Dimensions and weight: Dim. 330*145*H160. Weight 1400 kg. (on pallet) Bsderyb D Sepfx Akwewp

Condition: used, Year of construction: 1989, Used machine Bsdow I U E Aspfx Akwjwp Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. Bedpfoxnlflsx Akwswp - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: used, mileage: 330,300 km, power: 195 kW (265.13 HP), first registration: 05/1988, fuel type: gasoline, color: black, gearing type: automatic, Equipment: ABS, air conditioning, * Becker Europa radio * Leather seats Bwedpfxjvhu Ruj Akwsp * Air conditioning * Automatic transmission Excellent condition!! * Cruise control * ABS * Power steering * Alloy wheels * G-catalyst * Original paint * Original interior * Year of manufacture: 1988 * 8-cylinder engine ----Internal vehicle number: 7954----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or require further information, please feel free to contact us conveniently via WhatsApp.

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material Bwodevdtxijpfx Akwep - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: new, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 17cm Bwjdpfx Ajrblx Hekwsp - Weight 570kg - PTO speed: 540 rpm - HP tractor: 40 - 100 HP

Condition: new, Year of construction: 2026, CORMAK IND 2131 CNC Router (2100 × 3100 mm) Machine Description 1. Worktable Sectioned vacuum worktable with six independent vacuum zones, manufactured from rigid and durable HPL panels, individually controlled directly from the electrical control cabinet. Each vacuum zone is connected to the vacuum pump through an integrated piping system. Main vacuum openings are equipped with sealing plugs, allowing efficient clamping of workpieces in various sizes. The table surface features a network of vacuum channels, ensuring uniform vacuum distribution across the entire working area. Integrated T-slots allow manual workpiece clamping when required. The table is equipped with pneumatic positioning stops on two axes, enabling fast and repeatable positioning of workpieces in exactly the same location. 2. Spindle High-performance 9 kW brushless spindle from a renowned manufacturer, inverter-controlled and equipped with overload protection. High-speed electro-spindle featuring an advanced air-cooling system, ensuring reliable operation and low maintenance. 3. Drive System High-efficiency YASKAWA AC servo drives, controlled by a digital CNC controller, delivering outstanding machining quality while maintaining high feed rates in all axes. Brushless YASKAWA AC servo motors drive the X and Y axes via precision planetary gearboxes. The Z-axis, where positioning accuracy is critical, is driven by a reinforced precision ball screw. Gantry movement along the X and Y axes is achieved through HIWIN linear guideways and precision helical rack-and-pinion drives manufactured from hardened and heat-treated steel, ensuring long-term reliability and accuracy. 4. Machine Construction The moving gantry is manufactured from a cast iron casting, providing exceptional rigidity and excellent vibration damping during machining, resulting in superior surface finish and machining precision. 5. Automatic Tool Changer & Tool Length Sensor Bodpfx Aksvup Unewswp Equipped with a 12-position linear automatic tool changer (ATC) complete with ISO30 tool holders and ER32 collets. Included tooling: 1/2" – 6 pcs 1/8" – 2 pcs 3–4 mm – 2 pcs 5–6 mm – 4 pcs 7–8 mm – 2 pcs 9–10 mm – 2 pcs Every CNC router is equipped with a precision automatic Z-axis tool length sensor, eliminating manual tool measurement after each tool change and reducing setup time. 6. Industrial CNC Control System The machine is controlled by an industrial SYNTEC CNC controller, commonly used in professional machining centres. Supplied with a handheld control pendant and LCD display. Optional UCanCAM V13 CAD/CAM software available in Polish and English language versions. Technical Specifications Parameter Value Working Area 2100 × 3100 mm Z-Axis Travel 300 mm Machine Construction Cast iron gantry / Welded steel frame Drive System 1500 W Hybrid AC LEADSHINE servo motors Table Type Hybrid vacuum table Spindle Power 9 kW Gearbox Shimpo Spindle Speed 6,000–24,000 rpm Power Supply 400 V, compressed air min. 8 bar Repeatability ±0.01 mm Linear Motion System HIWIN linear guide rails and bearing blocks Workpiece Clamping Vacuum / Hybrid Vacuum Pump Optional 7.5 kW vacuum pump with 8 independent vacuum zones Software Optional UCanCAM V13 (Polish/English version)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Bodpfx Akei Hn Srswswp Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Bwjdpfx Aoxdttiskwep Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: new, The Brugger PX180 wood chipper is a powerful shredder for professional use. With an impressive capacity of up to 18 cm in diameter, it enables efficient shredding of wood logs. The hydraulic inlet is equipped with a "No Stress" system to ensure smooth material feeding. Sturdy construction and high-quality materials ensure reliable performance and long service life. - Hydraulic inlet with automatic "No Stress" - Diameter up to 18 cm - Weight 648 kg - Power take-off speed: 540 rpm Bodpfx Akerblyrowswp - Three-point attachment: CAT 1, 2, 3 - Minimum tractor power requirement: 50 hp The PX180 is the ideal solution for agricultural and forestry applications where efficient wood processing is required.