Edge banding machine

HOLZ-HER 1417

Condition: used, functionality: fully functional, Edgebander HOLHER SPRINT 1417 features the following operations: - pre-milling - end cutting - trimming to precise length - milling cutters with radius - radius scrapers - profile copying unit - flat scraper cleaners Rbsdpfoyg Er Rex Acvew - polishing unit

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Rsdpfjw I Uxcex Acvsbw Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: used, Year of construction: 2001, total height: 1,750 mm, total length: 5,650 mm, total width: 1,100 mm, Weight: 1.950 kg Price: On request - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 468/0-103 - Transport dimensions: 5650mm x 1100mm x 1750mm (l x w x h) - Transport weight [kg]: 1950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Rbsdpfjxlqpdsx Acvjw Yorick Diebels

Condition: ready for operation (used), Year of construction: 2000, Holzher 1417 edge banding machine Rbjdpfjuaqh Uex Acvow Gluing thickness 8 mm feed speed 11 m/min Joint trimming with DIA tool type 1961 Snipping unit 1918 Flush trimming unit 1823 Multifunction unit 1942 Scraper unit 1929 R2 Copy trimming unit 1983 Surface scraper unit 1964 Buffing unit 1944 K Condition checked for function Year of construction 2000 Price 12000.

Condition: excellent (used), Equipment: scorer, Electric adjustment of saw blade height and angle; scorer. You can call or write to us. We can speak and write in German and Russian. You can also send messages in English. Rbodsw Ix Alepfx Acvew

Condition: used, The main line components and characteristics are the following: Perini rewinder, year 1993 2 unwind stands type4810 micro embossing calander model 470 C Deslcalander 4901, year 1993 rewinder 6881 Redpfx Acewkfryovsbw tail sealer 560C core making machine 211 2 core unwind stands 4202/4203 coreloader 622 log accumulator 511 2 log saws 140 log loader 619 2 Trimmex 5101 diverter Pulsar REDS 4-2-4 IEO, year 2012 Pulsar single beam modularconveyor system, typeC075, year 2012 primary packaging Casmatic CMW 42 EV, year 2001 1 bundling machine Wrapmatic BFA 25, year 1993

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, Rsdjv Sv Enepfx Acvebw End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Storage location: Nattheim Rbedsv Dauwepfx Acvow

Condition: new, Year of construction: 2026, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm Rbodpfjg Tu Rksx Acvsw heatable infeed fence quick change device f.motor corner rounder change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Rbodpfxjyg H His Acvow Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch