Used combined woodworking machines for sale (93)

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw Dcjdpoxl Ha Sjfx Am Rsh 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 1966, condition: used, machine/vehicle number: 12558, Saw motor 2,2 kW 40ger spindle sliding carriage with short Festo-Superfix Milling fence with fine adjustment, without suction hood Dodpeigab Rofx Am Roch suction slotted hood 140 mm Cable + plug 16 A

Year of construction: 1978, condition: not inspected (used), machine/vehicle number: 1177, Connected load approx. 18 kW working width 140 mm Feed below consists of: conveyor belt 8800 x 60 mm bottom conveyor belt 8800 x 40 mm for stem Top feed consists of: Conveyor belt 7140 x 40 mm top Aggregates: Dcodoiw D T Ijpfx Am Rsh pos. 1 - scoring unit 2,2 kW 3000 rpm. pos. 2 - milling unit 3 kW 6000 rpm. pos. 3 - milling unit 5,5 kW 6000 rpm. pos. 5 - belt grinding unit 2,2 kW 120 x 2060 pos. 8 - belt grinding unit 2,2 kW 120 x 2060 / frame grinding belt pos. 4, 6, 7, 9 - profile and edge breaking units Suction connection pieces 5x100 mm, 1x120 mm

Condition: reconditioned (used), functionality: fully functional, Connected load 380V 3 x 3kW, weight approx. 550 kg, external dimensions 2700 x 1500 x 850 mm, turntable, jointer-thickness planer width 300 mm with three-knife shaft, table dimensions 310 x 1500 mm, clearance height 230 mm, circular saw 0-45° tiltable, max. cutting height 100 mm, saw table dimensions 350 x 950 mm, travel 1200 mm, saw blade diam. max. 300 mm, router with two speeds 3100 / 6200 rpm, router with two speeds 3100 / 6200 rpm, max. Cutting height 100 mm, saw table dimensions 350 x 950 mm, travel 1200 mm, saw blade diam. max. 300 mm, router with two speeds 3100 / 6200 rpm, router arbor 30 mm, height adjustment max. 110 mm, slot drilling device speed 4500 rpm, table size 180 x 470 mm, two-jaw chuck 0-165 mm, suction nozzle 3x100 mm Dsdpfx Ametqva Dj Roch

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2600x3010x1250 mm Weight 500 kg Dedpfxovz Hlws Am Rech Total power requirement 3,8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 850 kg Total power requirement 5,5 kw Dodpfx Amsvz Hkms Rjch

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 870 kg Djdpfx Amjvz Hivj Rsch Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2000x3010x1250 mm Dedpfx Amevz Hgzj Rjch Weight 400 kg Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x2900x850 mm Dcjdpfx Amevz E S As Rsh Weight 650 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1200 mm Weight 650 kg Dedpfx Asvz E Rxom Rsch Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1200 mm Weight 650 kg Dcodpfxovz E Rro Am Rjh Total power requirement 2,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x2900x850 mm Weight 1280 kg Total power requirement 5,5 kw Dedpfx Amovz E Ecj Roch

Condition: new, DescriptionWork table made of heavily ribbed gray cast iron and base frame made of welded steel guarantee torsional rigidity and vibration-free operationUnique in this performance class: Format sliding carriage made of anodized aluminum for highest cutting precisionCutting plane directly on the saw bladeSwiveling saw blade from 90° - 45Trimming frame with aluminum crosscut fence and adjustable fence jaw for panels and large workpiecesMilling protection hood for profilingTwo independent motors for each working unitTECHNICAL DATADimensions and weightsWeight (net) approx. 190 kgSuction connectionSuction port diameter 120 mmSuction port diameter saw blade guard 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle drive motor 40Power of drive motor 2 x 1.8 kWSliding carriage and tableLength of sliding table 1140 mmFormat sliding carriage width 201 mmHeight of format sliding carriage 70 mmtable length 1040 mmtable width 224 mmMilling spindlespindle mandrel diameter 30 mmuseful length of spindle 75 mmspindle speeds 5000/7500 min?¹Milling tool diameter l diameter max. 160 mmtool diameter max. tenon milling 200 mmCircular saw unittrimming length 1200 mmCutting width with rip fence 700 mmMax. Trimming width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45Max. Cutting height 90° 75 mmMax. cutting height Cutting height 45°60 mmMax. Saw blade projection 90° 67 mmMax. saw blade Saw blade projection 45°40 mmDiameter (main) saw blade 250 mmSpeed (main) saw blade 4000 min?¹EquipmentAnodized aluminum sliding carriageTrimming frame with angle-adjustable crosscut fence with a folding stop and degree scaleSaw parallel stopEccentric clampTable wideningTrimming fence with wooden fence jawsManual height adjustment of the spindleSaw blade height adjustment manualsaw blade tilt adjustment manual&nbsp, Dsdpfx Aovwfqwsm Roch

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Dcsdpfx Amjvwf Eno Roh

Condition: used, combined with: - Slot drilling device Dedpfx Amevwfyxe Rsch - heavy roller table   second hand Make Rex Storage location 97447 Gerolzhofen, freely loaded, unpacked Handover in the current condition as seen, without guarantee and guarantee

Condition: used, combined with: - Slot mortising unit - Spindle moulder - Surface and thickness planer - Heavy-duty roller table combined with: Slot mortising unit Spindle moulder Heavy-duty roller table from private owner used, good condition, low operating hours Make: Rex Model: TFZ-D-4 Machine no.: 15.842 Dcsdpeycxg Tsfx Am Rjh Extraction connection D 120/140 mm Space required approx. 1800 x 2000 x 1100 mm Weight approx. 1200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 1996, Woodworking machine circular saw VEMA TKS LBM, year 1996, with milling-drilling device, data milling-drilling device: speed: 3.000 rpm, table size: 570 x 300 mm, drilling depth: 150 mm, drilling length: 210 mm, height adjustment: 170 mm, two-jaw chuck: up to 20 mm, data saw: speed 3000-6000 rpm, up to 450mm blade, cutting height up to 155mm, angle cut 0°-45°, table dimensions 1260x1100mm expandable width with longitudinal fence 2200mm, extra table 750x950mm Dcsdpfxshvaphe Am Reh

Condition: good (used), Year of construction: 2009, functionality: fully functional, Complete Corali automatic pallet production line. The production line is ideal for example, to produce paper and cardboard pallets. The automatic setup for fast changeover enables top efficiency even with small production runs. Machine Is in use and operational. Facts about the line - Deck nailing unit - Leg nailing unit - Assembly unit - Foiling unit, 6 rolls - Ink printing unit - Fast change setting, change over time about 5 min. - Minimum production series up from 15 pcs - Capacity approximately 1800 pcs / shift - Pallet sizes min. 530x530mm, Max 1500x1250mm - Wooden blocks / two block cutting saws and convoyer - Compressed blocks can be loaded manually - Closed and open deck pallets - 2 operators - Corner cutting saw - Robot stacking, Dcsdpfx Amoy Exvns Rjh - Binding of the stack - Possibility to feed previously manufactured covers to the production line - Manuals both in written and as files - Year of manufacture 2009 The buyer will be responsible for dismantling and transporting the line at the agreed schedule. The line will be sold as a single wholeness.

Condition: excellent (used), Year of construction: 1980, - saw - moulder - thicknesser planing width 210mm planing height 120mm tool change is done by changing the position of the belt. Djdpfx Ajp Sugfjm Rsch

Condition: good (used), Year of construction: 1989, planing width: 310 mm, power: 2.2 kW (2.99 HP), - saw Dcjdpfx Asp Sugmom Reh - drill - thicknesser planing width 310mm planing height 227mm ATTENTION NO MILLING MACHINE

Condition: excellent (used), Year of construction: 2019, For sale is a used Hammer B3Winner Comfort circular saw and router with a cutting length of 2000 mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. (Fully functional) Technical specifications: - Circular saw and router tiltable 90-45° - Sliding table 2000 mm - Outrigger table with degree grid index Djdpfx Amov Sbpxo Rjch - Miter stop 1300 mm - 4 routing speeds: 3000/6000/8000/10000 rpm - Cutting width 800 mm - 2 motors, each with 5.5 HP (4 kW) 400 volts - Year of manufacture 2019 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, milling machine, combined machine, combination machine Reference: R-L0AHG

Condition: excellent (used), SLIDING TABLE SAW Carriage length: 1250 mm Scoring unit Saw unit tilts up to 45° Manual saw blade raise and lower Motor power: 2.2 kW Dcedpjyymgdjfx Am Reh SPINDLE MOULDER Spindle diameter: 30 mm Manual spindle raise and lower 2 spindle speeds: 4500/6000 rpm SURFACE PLANER-THICKNESSER Working width: 300 mm 3-knife cutterblock Standard knives Table dimensions: 1500x300 mm Thicknesser table: 300x600 mm HORIZONTAL BORING MACHINE 460 kg Year: 2009

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1150 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. Technical data: - Cutting length: 1250 mm - Cutting width: 900 mm - Cutting height: 103 mm - 4 spindle speeds - Directional switch - 3-knife cutter block - Planing length: 1400 mm - 3 motors, each 3 kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Dodpfxoxdknwo Am Rech Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-B18YQ

Condition: like new (used), For sale is a Hammer edge sanding machine HS950, with a belt length of 2515 mm. The machine is in good condition and has been inspected by our specialist staff. - Belt length: 2515 mm - With oscillation motor - Tiltable 0 - 90° - Motor power: 2.2 kW / 3 HP - Year of manufacture: 2024 - Demonstration machine Dsdpfx Aow Hf D Ijm Roch The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: edge sanding machine, sanding machine, surface finishing Reference: R-A0117

Condition: new, Year of construction: 2025, functionality: fully functional, table length: 1,200 mm, table width: 750 mm, Mobile Grinding Table * ATEX compliant * With integrated fan * Integrated high-quality hose filters with support basket * Mechanical cleaning * On castors Dcodpfx Aow Ng Hbsm Reh * Ready to plug in