Used Combined Drawing for sale (6,187)

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Csdpfxez D Ihfs Aqvjri

Condition: good (used), Year of construction: 1972, functionality: fully functional, Drawing slide force: approx. 800 Mp Blank holder force (die cushion): 320 Mp Drawing slide stroke: 900 mm Blank holder stroke (die cushion): 400 mm Maximum distance between table and slide: 1920 mm Table size: 3200 x 2000 mm Csdpfe Ah Squox Aqvori Clear opening on the loading side: 3250 mm Table height above floor level: 400 mm Overall height above floor level: 6300 mm Drive power: 100 hp Machine weight: 153 tons

Condition: good (used), Year of construction: 2014, 1 x Loma CW3 + IQ3 Combination System Year: 2014 Retail / Supermarket Spec Crjdpfxe Ahxt Hj Aqvoi Head aperture is 250mm high x 150mm wide (useable height max 220mm), 300mm long weigh table, has all failsafes including bin-full, bin-lock monitor, low air, reject confirmation, interlocks. Pusher reject arms

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 4 kW (5.44 HP), For sale is a Felder AD 741, a combination jointer and thickness planer manufactured in 2019. This machine is suitable for professional use in carpentry and woodworking shops. Technical data: - Manufacturer: Felder - Model: AD 741 - Year of manufacture: 2019 - Motor power: 4.0 kW - Connection: 400 V, 3 phases, 50 Hz - Current consumption: 8.6 A - Jointer table width: 410 mm - Thickness planer table width: 404 mm - Jointer table length: 2,000 mm - Thickness planing height: approx. 3–230 mm - Feed rate: 6 / 12 m/min - Max. material removal: approx. 4 mm - Weight: approx. 500 kg The Felder AD 741 allows switching between jointer and thickness planer functions. Please refer to the images for the exact equipment of the machine offered, in particular the cutterhead and any special accessories, or inquire if interested. Inspection is possible by arrangement. Crodpfs Ahqxwex Aqvoi

Condition: used, Year of construction: 1995, 1995/2022 Koch/Aniro 14-strand Wire drawing machine - Upgraded in 2022 Credps Ah Ib Hjfx Aqvei Produces: 1.0 mm diameter wire from 5.5 mm diameter wire rod - Low carbon. 3 strings, drum diameter 600 mm. 11 strings, drum diameter 340 mm. 3 x 11 kW motors. 12 x 17 kW motors. Wire production speed approx. 9 m/s Dimensions: Length: 22,000 x Width: 2,200 mm, Electric cabinets: Length: 8,000 x Width: 600 mm

Condition: good (used), machine/vehicle number: 17346, functionality: fully functional, power: 4.78 kW (6.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, number of blades: 4, rotational speed (max.): 5,500 rpm, HK 63 combined jointer/thicknesser - Planing width 630 mm, - Cutterhead width 640 mm, - 4-knife cutterhead, - Table length approx. 2100 mm, Crodj Ahmy Ujpfx Aqvoi - Planing height 2-230 mm, - Toothed steel infeed roller, steel outfeed roller, - 2 sliding rollers in the thicknessing table, - Motor 6.5 HP, - Speed 5000 rpm, - Feed rate 10 / 16 m/min, - Adjustable fence for the jointer

Year of construction: 1999, condition: ready for operation (used), machine/vehicle number: 9920268, GEISS DU2000 T7 Vacuum Thermoforming Machine • 1999 • 2000 × 1000 mm • Halogen Heaters • Sinumerik Control Industrial vacuum thermoformer with large 2000 × 1000 mm sheet capacity and deep draw capability up to ~650 mm. Equipped with high-speed halogen flash heaters, Sinumerik heater control, three vacuum pumps, plug assist, auto sheet loader, and motorized window plates for rapid tool changes. Excellent for high-volume thermoformed parts production. Crodjx Uz Ncepfx Aqvsi

Condition: ready for operation (used), machine/vehicle number: 50321997, functionality: fully functional, input voltage: 380 V, input current: 11 A, input frequency: 50 Hz, For sale is a jointer and thickness planer manufactured by Kölle. The machine is fully functional and can be inspected at any time. Codpfx Aqj Aia Syevsri Price does not include delivery.

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of cutting unit (cm): 175 * Weight without cabin (kg): 0 * Grain tank capacity (hl): 6.5 * Model: MF30-6 * Serial number: 0D7758 * Year of manufacture: 1967 ---- Internal vehicle number: 8144 ---- Errors and prior sale reserved. WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Csdpfovhvf Tsx Aqvori Whatsapp

Condition: ready for operation (used), functionality: fully functional, Wire drawing polishing machine, ultrasonic / wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V Crodpj Ag Dxbefx Aqvei 20 kHz 4-6 bar It is used to process or polish wire drawing dies through which metal wire is drawn.

Condition: excellent (used), 5-in-1 combination machine Manufacturer: SCM Samco Type: CU 350 K Saw, router, planer, thicknesser, and mortising machine Planer: Working width: 350 mm Table length: 1800 mm Adjustable fence: 90°-45° Motor: 3.0 kW / 400 V Thicknesser: Working width: 350 mm Maximum feed height: 230 mm Panel saw: Sliding table: 1500 mm Cutting height: 100 mm Motor: 3.0 kW / 400 V Adjustable to 45° Codpfx Aqo Ahnnpjvori Router: Spindle diameter: Ø 30 mm Adjustable to 45° Motor: 3.0 kW / 400 V Spindle speeds: 1400/3500/6000/8000 rpm Circular guide Slotting device Mortising attachment Very good condition

Condition: good (used), Year of construction: 1954, wire dia. . mm wire length . mm pulling capacity 7 t total power requirement . kW weight of the machine ca. . t Crsds Ah Id Njpfx Aqvoi dimensions of the machine ca. . m

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas Crsdoz Hngmjpfx Aqvji • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1C968, Very well-maintained, almost new CO₂ refrigeration and freezing system from 2022. Crjdpfxo Aa Rh Te Aqvoi The system is being replaced because the company is moving to a larger building, making the complete installation redundant. Specifications: 2 freezing units for a freezing room of 1,000 m². (freezer capacity is 8,000 m³). 3 cooling units for a cooling room of 2,000 m². (cooling room capacity is 8,500 m³). 2 switchgear cabinets. 1 pressure unit/booster compressor unit, including expansion tanks. 1 condenser. This is a complete installation, including all documentation. It will be dismantled and loaded.

Condition: excellent (used), Year of construction: 1959, input voltage: 400 V, input frequency: 50 Hz, total length of planing tables: 1,800 mm, Combi 500 Combination Surfacing and Thicknessing Planer - 2-knife cutterhead - Table length: 1800mm - 2 dust extraction ports - Feed motor with 2 speeds - Year of manufacture: 1959 - 2-knife cutterhead, planing width 510mm, planing height 200mm - Aigner auxiliary fence and guide strip Cedpfx Ajy Tucteqvsri - Toothed steel feed roller, steel take-off roller - 2 dust extraction ports - 2 sliding rollers in the thicknessing table

Condition: excellent (used), Year of construction: 1995, Surface planer and thicknesser combination machine Manufacturer: Elektra-Beckum Model: HC 410 Year of manufacture: 1995 Cjdpfxsz Uxmzj Aqveri Working width: 410 mm Max. planing height: 230 mm Power: 5.5 kW Number of knives: 3 Knife type: Strip-type planing knives Feed rate: 7 m/min Surface table length: 1,700 mm Weight: approx. 300 kg Includes infeed/outfeed roller table.

Condition: used, used cleaned functionally tested Manufacturer: BGU Type: KAD 409 S Machine No.: 1179458 Number of knives: 2 Table lips, low-noise Crsdpfxj Ahr Are Aqvei Safety wedge bar knife shaft Motor kW: 4.0 Planing width approx. mm: 400 Planing height approx. mm: 200 Table length approx. mm: 700 Dust extraction connection mm: 120 and 100 Space required approx. L x W x H mm: 1500x1100x1100 Weight approx. kg: 400 Total connected load approx. kW: 4 Location: 97447 Gerolzhofen, free loading, unpackaged Handover in the current condition, as inspected, without guarantee or warranty

Condition: used, Technical specifications: Planer Cjdo Ah Ewkjpfx Aqvori Max. planing width: 300 mm Cutterhead diameter: 100 mm Number of knives: 3 Motor power: 3 kW Voltage: 400 V Thicknesser Max. planing width: 300 mm Max. planing height: 220 mm Min. length of the workpiece: 350 mm Saw Max. saw blade diameter: 250/240 mm Eccentric clamping Motor power: 3 kW Voltage: 400 V Router Spindle diameter: 25 mm Manual spindle height adjustment Spindle height: 100 mm Motor power: 3 kW Voltage: 400 V Overall dimensions Length: 2700 mm Width: 1800 mm Height: 1300 mm

Condition: used, Year of construction: 1976, machine/vehicle number: 8841, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressing force: 25 t Pulling force: 10 t Total power requirement: 11 kW Machine weight: approx. 3 t Stroke and working data Overhang: 260 mm Stroke: 500 mm Pulling stroke: 200 mm Table Credpo Aa Nynofx Aqvsi Table size: 500 × 500 mm Dimensions Space requirement: approx. 1.40 × 1.10 × 2.80 m EQUIPMENT Very robust design Two-hand operation Analog pressure gauge

Condition: used, Year of construction: 2019, overall weight: 1,047 kg, Combined Surfacing and Thicknessing Planer Manufacturer: SCM GROUP spa Model: SCM Type: L Invincible FS7 Year of Manufacture: 2019 Weight: 1,047 kg Usable Working Width: 520 mm Credez Iqqkspfx Aqvoi Total Table Length: 2310 mm Cutterhead Diameter: 120 mm Planerhead Speed: 5000 rpm 4 Knives: 35 x 3 x 520 mm Aluminum Surfacing Fence: 1200 x 190 mm Surfacing Fence Angle Adjustment: from 90° to -45° Min./max. Planing Height: 3 / 250 mm Feed Rate (Thicknessing): 5 - 8 - 12 - 18 m/min Dust Extraction Port Diameter (Surfacing): 120 mm Dust Extraction Port Diameter (Thicknessing): 120 mm Purchase Price (Net): €15,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: good (used), Code: 0507 Brand: SCM MINIMAX - ITALY Model: CU 350 K - CE Standard Universal 5 works combined machine for joinery workshops, craftspeople, furniture makers, bespoke furnishings, doors, wooden joinery, DIY, panels and various applications – CE Standard Technical data: Base consisting of a single, fully welded steel monoblock Cast iron worktable Wide worktable surface area Three-phase motors V 380/50 Hp 3 each Surface planer: Working width 350 mm Total length of tables 1800 mm N° 3 blades Anodised aluminium guide adjustable from 90° to 45° Thickness planer: Table dimensions 600 x 350 mm Max/min working height 230/3 mm Max removal depth 5 mm Spindle moulder: Spindle length 136 mm Max rotational speed 8000 rpm Max tool diameter extending below the table 180 mm Circular saw: Carriage made of anodised extruded aluminium with a sliding system on steel guides Carriage stroke 1500 mm Max blade diameter 300 mm Blade tilting 90°–45° Cutting width at parallel guide 900 mm Squaring frame complete with guide, stops and a guide adjustable in both directions from 90° to 45° for angled cuts on panels Workpiece clamping presser Cjdpfx Aj Afwxleqvjri N° 3 suction inlets diameter 120 mm Overall dimensions of assembled machine mm 2000 x 2400 x 1100 h Transport dimensions mm 2000 x 1400 x 1200 h Weight kg 600

Condition: good (used), Year of construction: 1987, For sale is a used Felder BF5-41 4-in-1 combination machine with a cutting length of 1200 mm. The machine has been inspected and refurbished by our service team. Technical data: - Cutting length 1200 mm - Cutting height 95 mm - Max. saw blade diameter 300 mm - 3 milling speeds - Planer width 410 mm - 4-knife cutterblock - 3 motors, each 3 kW / 4.1 hp Csdpfoz Symkox Aqvsri - Year of manufacture 1987 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, multi-function machine, planer, thicknesser, circular saw Reference: R-E28JC

Year of construction: 2008, condition: used, functionality: fully functional, This is a combination steamer, also known as a convection oven, manufactured by Convotherm, model OGS 20.20, in a gas-powered version, direct injection, without a boiler, manufactured in 2008. The unit is set for natural gas; it can be converted to propane gas. The combination steamer is functional; videos can be sent upon request. The combination steamer is equipped with a trolley for 20 x 2/1 GN or 40 x 1/1 GN pans and includes 2 x 1/1 GN insert racks. The unit is sold without inspection or warranty, as received from the customer. An inspection will certainly be necessary for recommissioning. Wiring diagrams and documentation are included. Only frozen, ready-made meals have been heated/regenerated in this combination steamer. You will receive an invoice with VAT shown. Our used equipment service for you: High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Checked & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: W x D x H: approx. 1232 x 1055 x 1952 mm Power connection: V: 400 / kW: 2.2 Gas connection: kW: 70.0 Insert slots: 20 x 2/1 GN or 40 x 1/1 GN Weight: approx. 403 kg Year of manufacture: 2008 Condition: Used, no inspection Additional information: ACS Advanced Closed System (automatic energy-saving system, optimal humidity in the cooking chamber) Crisp & tasty (multi-stage cooking chamber dehumidification in ACS) Press & Go (image symbol) for quick selection of predefined cooking recipes Tray Timer (staggered loading) Start time pre-selection in real-time mode Night baking Delta-T baking (requires multi-point core temperature probe) Cook & Hold Programmable with 250 cooking recipes, each with up to 20 steps CONVOTHERM cookbook with pre-programmed cooking recipes Disappearing door: more space and improved workplace safety Double-glazed door with integrated door stop Antibacterial door handle latch with ventilation position and safety function Door handle latch with closing function Motor brake when opening the cooking chamber door: less steam escaping Fan with autoreverse function Handheld spray with stepless adjustment Multi-point core temperature probe Height-adjustable device feet Easy operation via menus/icons Bright graphic display Digital rocker switch for easy adjustment of temperature, time and core temperature Modular processor control with clear display and module self-check RS232 interface Storage of all device settings and cooking recipes in an additional memory module Permanent self-diagnosis for fault detection System with full-text error description Safety program mode: operation of the device with limited functionality is possible Basic prison version Csdpfx Aqsz Smhijvsri Robust design in stainless steel Seamless welded cooking chamber Rounded cooking chamber corners Suction plate easily removable Hygienic socket seal Cooking chamber lighting with shock-resistant glass cover Including loading trolley with condensate collection tray

Condition: used, Year of construction: 1990, operating hours: 2,946 h, power: 115 kW (156.36 HP), Equipment: air conditioning, cabin, INTERNAL VEHICLE NUMBER: M662 ----CLAAS DOMINATOR 88 SL ----HOURS: 2,946 ----YEAR OF MANUFACTURE: 1990 ENGINE: PERKINS 6-CYLINDER WITH TURBO (4-STROKE DIRECT INJECTION) WATER-COOLED MAXIMUM SPEED: APPROX. 25 KM/H CUTTING UNIT: 3.90 METERS RAPS TABLE THRESHING DRUM WIDTH: 1300 MM THRESHING DRUM DIAMETER: 450 MM STEPLESSLY ADJUSTABLE FAN FOR CLEANING FUEL TANK PIPE: HYDRAULICALLY SWIVELING TIRES NEW NUMBER OF SHAKERS: 5 SHAKERS HYDRAULIC DRIVE GRAIN TANK CAPACITY: 4600 L STRAW SPREADER TRANSPORT LENGTH: 10 METERS TRANSPORT HEIGHT: 3.85 METERS UNLADEN WEIGHT: APPROX. 8500 KG HEATING AIR CONDITIONING (COMPRESSOR MISSING) 3D LEVELING SYSTEM Csdpfoz Sdvwsx Aqvori HYDROSTATIC TRANSMISSION WITHOUT CUTTING UNIT WAGON THE HEADER DRIVE HAS BEEN COMPLETELY OVERHAULED NEW BASKET NEW BELT NEW BLADE Contact us directly via WhatsApp: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer customized financing solutions tailored to your needs: with or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will support you from the initial consultation to vehicle handover. 4. Our additional services: In addition to vehicle purchase, we offer exclusive services for a smooth process: Worldwide vehicle sales: Support with purchase and export, wherever you are. Transfer registration plates: Provision of export or short-term registration plates for transport. Customs clearance: We take care of all formalities for export abroad. Delivery of your vehicle: Safe and timely delivery directly to you. Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, net sales for export are generally possible if all required documents are available. Net sales within the EU are now only conducted with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp: Staff on-site during opening hours. Please call in advance to make a reservation. We look forward to your call Your team from Autohaus MAT in Waibstadt

Year of construction: 2009, condition: ready for operation (used), Combined automatic float and laminated safety glass (VSG) cutting line manufactured in 2009. This LISEC Combined VSG & Float Glass Cutting Line features a robust configuration with breakout, transport, and trimming modules. It is currently installed and running in active production, allowing for turnkey inspection. If you are looking to get high-quality glass processing capabilities, consider the LISEC Combined VSG & Float Glass Cutting Line we have for sale. Contact us for further details. Crjdo Agixyspfx Aqvsi - Plant Configuration: Combined automatic float and laminated safety glass (VSG) cutting line with breakout, transport, and trimming modules- System Manufacturer: LISEC Austria GmbH / LISEC Maschinenbau GmbH- Years of Manufacture (Line Integration): 2009 & 2016 (mixed installation)- Operational Status: Currently installed and running in active production (turnkey inspection possible)- Standard Line Voltage: 400 V / 50 Hz (3/N/PE~ 400V, Control: 24V AC/DC)- Operating Compressed Air: 6.00 – 8.00 bar- Total Cumulative Installed Weight: > 28,400 kgMODULE BREAKDOWN & INDIVIDUAL SPECIFICATIONS:1. VSG (Laminated Safety Glass) Processing Section:- Pos 01: LISEC PTV-60/30RE (YOM: 2009) * Type: Laminated glass cutting machine (Verbundglasschneidanlage) * Weight: 5,640 kg | Electrical: 400 V / 50 Hz- Pos 02: LISEC VZ Linie 2 (YOM: N/A) * Type: Assembly unit / line connection section- Pos 03: LISEC LKT-45/45TS (YOM: 2009) * Type: Processing / support air-cushion table * Weight: 3,200 kg | Connected Load: 61.28 kVA | Air: 8.00 bar- Pos 04: LISEC VB-33 (YOM: 2009) * Type: Laminated glass line sub-assembly * Weight: 2,200 kg | Connected Load: 17.00 kVA | Air: 6.00 bar- Pos 05: LISEC FASV-33 (YOM: 2016) * Type: Automated protruding PVB film trimmer/remover * Weight: Not specified | Connected Load: 0.83 kVA | Air: 6.00 bar- Pos 06: LISEC VB-33 (YOM: 2016) * Type: Cutting machine for laminated glass * Weight: 2,200 kg | Connected Load: 18.83 kVA | Air: 6.00 bar | Max Load: 43 kg/m²- Pos 07: LISEC AL-32/33N (YOM: 2016) * Type: Glass stop locator and positioning section * Weight: 1,830 kg | Connected Load: 25.88 kVA | Air: 6.00 bar- Pos 08: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar | Max Load: 50 kg/m²2. Float Glass Processing & Transfer Section:- Pos 09: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar- Pos 10: LISEC BTA-40/26 (YOM: N/A) * Type: Horizontal transport / support table * Weight: Not specified | Electrical: Not specified- Pos 11: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 9.05 kVA | Air: 6.00 bar- Pos 12: LISEC BTS-37/33 (YOM: 2016) * Type: Manual breakout table with integrated breaking bars * Weight: 1,543 kg | Connected Load: 15.75 kVA | Air: 6.00 bar- Pos 13: LISEC LKT-10/33 (YOM: 2016) * Type: Horizontal air-cushion transfer table * Weight: 250 kg | Connected Load: 4.50 kVA | Air: 6.00 bar | Max Load: 33 kg/m²- Pos 14: LISEC BTA-40/26 (YOM: 2009) * Type: Horizontal belt transport conveyor unit * Weight: 1,154 kg | Connected Load: 2.30 kVA | Air: 8.00 bar | Max Load: 50 kg/m²- Pos 15: LISEC TBY-26/12 (YOM: 2009) * Type: Intermediate transport module * Weight: 255 kg | Connected Load: 0.00 kVA | Air: 6.