Used Seedbed Combination for sale (3,852)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 Lhodexd Thmepfx Afkjk 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: good (used), functionality: unexamined, machine/vehicle number: VBP00065013000009, Year of construction: 2021, The PÖTTINGER TERRASEM V 6000 DZ is a modern universal seed drill designed for precise sowing of cereals and cover crops, with the option for simultaneous fertilizer application. It is part of the TERRASEM series from the manufacturer Pöttinger. Basic Information: Lhjdpfxoy Em H Uj Afkjk Type: Combined seed drill (seedbed preparation + sowing combination) Production: approx. 2021 – present Application: Conventional, minimum tillage, and no-till systems Option: Sowing + fertilizing ("DZ" version = dual hopper / dual system) Technical Specifications: Working width: 6 m Transport width: 3 m Number of rows: 48 Row spacing: 12.5 cm Press wheel diameter: approx. 380 mm Hopper capacity: up to ~5600 L (split, e.g. 40:60) Required tractor power: approx. 180 – 250 HP

Year of construction: 2021, condition: used, Empty weight: 400 kg GVW: 400 kg Serial number: 211214-098983 Capacity: 20 levels Cooking modes: Convection, steam, and combination cooking Steam generator: Yes Temperature range: 30 °C to 250 °C (preheating up to 300 °C) Controls: Touchscreen Functions: * Hot air cooking * Steam cooking * Combination cooking * Regeneration * Low-temperature cooking * Delta-T * Cook & Hold * ClimaOptima® (automatic humidity control) * SmartChef® (automatic programs) * CombiWash® (automatic cleaning) Dimensions (W × D × H): 1,122 × 951 × 1,877 mm Total weight: 400 kg Online auction held following the closure of the Umiami research and development center in Villebon-sur-Yvette (91), which was dedicated to the development of plant-based food products under the "Swap Food" brand. This auction includes over 100 lots, notably featuring state-of-the-art laboratory and process development equipment: “Anton Paar” particle size analyzers and rheometers, a “Stable Micro Systems” texturometer, “Dohmeyer” cryogenic cabinets, “Hounö” and “Unox” ovens, a “Mettler Toledo” metal detector, an “Anritsu” checkweigher, "Sartorius" thermobalances, as well as numerous food preparation appliances, laboratory equipment, stainless steel furniture, shelving, computer equipment, and technical equipment. Auction organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. Lhsdpfjzvb Ixox Afkjk The online auction opens Tuesday 18 August and closes Wednesday 23 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Monday 21 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, planing width: 500 mm, number of blades: 2, Kölle ADH planing/thicknessing machine, 500mm planing width, 3 feed speeds, steel infeed roller, rubber outfeed roller, Lsdezv E A Hepfx Afkehk motor brake, spiral cutterhead. The machine is in very good condition and ready for immediate use.

Condition: used, Year of construction: 1967, power: 21 kW (28.55 HP), * Working width of cutting unit (cm): 175 * Weight without cabin (kg): 0 * Grain tank capacity (hl): 6.5 * Model: MF30-6 * Serial number: 0D7758 * Year of manufacture: 1967 ---- Internal vehicle number: 8144 ---- Errors and prior sale reserved. Lhsdpfxjvhvf Te Afkjk WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Whatsapp Whatsapp

Condition: used, Year of construction: 1995, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 530 mm, rotational speed (max.): 4,400 rpm, We are selling our robust MAKA AD 530 A planer and thicknesser. This machine is from 1996 and is ideal for carpentry shops, joineries, and woodworking businesses. Equipment and technical data: Manufacturer: Griggio / Distributed by MAKA Lhedpfxezu Sdne Afkok Type: AD 530 A Year of manufacture: 1996 Planing width: approx. 530 mm Tersa cutterhead Articulated pressure bar Auxiliary fence Main motor: 5.5 kW Feed motor: 0.18 kW Connection: 380 V / 50 Hz / Three-phase Machine No.: 9405190 Heavy-duty and durable industrial machine Important: Collection is only possible once our new machine has been delivered. This is expected to be around mid-September. By arrangement, the machine can be inspected and tested on site beforehand. Due to its size and weight, the machine is preferably sold for self-collection. Assistance with loading can be arranged in advance. Private or commercial sale with exclusion of warranty, guarantee, and right of return. All information is provided to the best of our knowledge and without guarantee.

Condition: repair required (used), Year of construction: 2024, For sale is a used Hammer planer machine A3-31 with a planing/thicknessing width of 310 mm. The machine is in like-new condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: - Planing/thicknessing width 310 mm - Silent Power planing shaft - Planing table, dual folding - Planing fence, swiveling 90-45° - Thickness setting 4-225 mm - 4 HP (3 kW) motor, 400 volts - Machine no. 52.09.021.24 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Planer, thicknesser, planing machine, surfacing, thicknessing Lhedpfx Afszuxwhjksk Reference: R-AT18K

Condition: excellent (used), Year of construction: 1995, Combined surfacing and thicknessing planer from Hofmann with the legendary Leitz-Wigo spiral cutterhead, very robust machine construction in a compact design. A special feature of this machine: the surfacing table does not need to be folded up for thicknessing, so no conversion is necessary. Equipped with a "real" spiral cutterhead. Planing width approx. 620mm Thickness table electrically adjustable with digital display, fine adjustment via handwheel serrated steel feed roller rubber-coated feed roller, new Planing height approx. 4 - 240mm 2 feed speeds 7 + 14 m/min Table length 2520mm Drive motor 5.5kW with automatic motor brake 2-knife cutterhead with spiral, re-sharpenable HSS knives Two sets of spiral knives are included, each installed in matching clamping blocks. Re-sharpening is done by a sharpening service; the sharpened knife sets are then simply screwed into the cutterhead without any adjustment work. Slotted table lips Planer cutterhead guard Suvamatic Fence swivels with a rip fence Concave and pointed fence adjustment for the surfacing tables Rod for hanging the dust extraction hood Dust extraction port 2 x 160mm Lodpfeztkyxjx Afkjhk Only a few touch-up spots V-belt renewed Knives sharpened Rubber feed roller renewed Operating manual CE marking No scratches on the tables. Thickness table with two adjustable table guide rollers Dimensions approx. 2520 x 1200 x 1200mm (LxWxH). Weight approx. 1300kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider".

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale is a Format4 c-express 920 classic CNC drilling and dowel processing center from Felder. This machine is ideally suited for efficient processing of carcass and furniture components. It enables precise drilling, milling, and dowel processing and is particularly designed for carpentry shops, joineries, and furniture manufacturing. Thanks to its compact design and powerful CNC control, the processing center is ideal for economical single-piece and series production. The machine is in a well-maintained, used condition and can be inspected and tested under power by appointment. Technical data: Manufacturer: Format4 (Felder Group) Type: c-express 920 classic with additional front and rear support roller tables Operating hours: approx. 800 Year of manufacture: 2016 LxWxH: 2100x1605x1950mm Weight: 850kg Motor power drilling head: 1.5kW Drilling head speed: 3600 rpm Circular saw unit speed: 9000 rpm Horizontal spindles (max.): 2+2, 1+1 Vertical spindle (max.): 9 Distance between horizontal spindles: 32mm Distance between vertical spindles: 32mm Diameter horizontal spindles max.: 15mm Diameter vertical spindles max.: 8 x 15 mm, 1 x 35 mm Diameter circular saw blade max.: 100mm Max. drilling depth: Horizontal 30mm, Vertical 55mm Voltage: 400 V 3 phases Frequency: 50 Hz Connected load: 7.0 kW Operating mode: S6 40 % CNC-controlled processing center Automatic workpiece feed Operating PC with screen, keyboard, and mouse Foot switch Dust extraction connection Drilling and dowel processing Workpiece support table with rollers Safety enclosure Application areas: Furniture manufacturing Carcass production Dowel processing Drilling patterns Row drilling Hardware drilling Interior construction Carpentry Joinery Lhodpfjzrwmisx Afkek The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, barely used, powerful professional machine with 5 combined functions. Numerous accessories included. Lhedpfx Afozn I Aaskek Features a circular saw and table router with a sliding table, jointer and thickness planer, as well as a mortising machine. 5 motors, 360 V. The machine is available for sale immediately and is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: MC00051997, GRIGGIO T 220 concrete mixer, year 2000. Lsdjzk Hnyjpfx Afkshk

Condition: good (used), Year of construction: 2020, functionality: fully functional, total width: 4,100 mm, total length: 17,000 mm, total height: 3,000 mm, Combination consisting of a freezer room, a cooling room, a blast chiller, and a refrigerated area. Professionally disassembled. Equipped with 3x Bitzer compressors and 1x Tecumseh compressor. All compressors have been disassembled and brazed shut, and the refrigerant has been pumped back. Total cell dimensions = 17000x4100x3000mm. Freezer room interior dimensions = 5070x3850x2850 mm. Blast chiller interior dimensions = 1500x3850x2850 mm. Cooling room interior dimensions = 3000x3850x2900 mm. Lhjdpozk Dvhefx Afkjk Refrigerated area interior dimensions = 7050x3850x2900 mm.

Condition: good (used), Year of construction: 1985, Used machine Equipment and technical data: - 4-knife planing cutter block - Surfacing: - Working width: 500 mm - Total table length: 2200 mm - Motor: 4 kW Ledezpa Ukopfx Afkohk - Thicknessing: - Minimum working height: 3 mm - Maximum working height: 230 mm - Maximum chip removal: 8 mm Availability: immediate Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1987, machine/vehicle number: AB-14022, power: 4 kW (5.44 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 400 mm, number of blades: 3, actuation type: manual, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, total length of planing tables: 2,000 mm, total width: 400 mm, overall weight: 580 kg, SCM Jointer-Thickness Planer 2000 d.FS Planing width: 400 mm Jointer table: 950 / 950 mm Cutterhead speed: 4000 rpm 3 strip planer knives Planing height: 3 - 200 mm Feed rate: 4.5 / 8 m/min Max. cutting depth: 8 mm Lhodoxnpn Repfx Afksk Motor: 4 kW / 400 V / 50 Hz Weight approx. 570 kg As inspected, ex location Seevetal Subject to prior sale

Condition: used, Bäuerle KFL Milling and Drilling Machine The robust Bäuerle KFL combined woodworking machine combines a panel saw, a long-hole drilling machine and a table router with feed in a single machine, and comes with a comprehensive range of accessories. Technical data: - Motors: 2 - Length: approx. 320 cm - Width: approx. 140 cm - Height: approx. 160 cm Ledpfx Afeztvywjkshk - Table: swivelling - Technical details: on request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,706 h, power: 366 kW (497.62 HP), fuel type: diesel, maximum speed: 30 km/h, first registration: 07/2017, next inspection (TÜV): 07/2026, rear tire size: 500/85 R24, machine/vehicle number: YHG233775, Equipment: air conditioning, cabin, lighting, rape cutter, trailer coupling, On behalf of an authorized party, we are offering the following used item for sale: Case-IH combine harvester AF 7240 with ST rotor Chassis number: YHG233775 Longitudinally arranged ST rotor 30 km/h version 6-cylinder Power: 366 kW (497 hp) Front wheels: Track drive, sprung, 610mm Rear wheels: 500/85 R24 HID work light package AC FAN automatic fan speed adjustment Adjustable discharge spout Cross-flow transverse flow fan Hydraulic drive Redekop chopper Xtra Chop Accu Guide complete Steering on Egnos – retrofitted with existing RTK antenna LED work light package, 4 x rear, 1 x grain tank inlet Additional cameras Yield and moisture measurement Radio, two-way radio Last inspection before the 2025 harvest, approximately 300 ha Minor scorching above the tank, damaged cables have been repaired Header 9.15 m, Series 3050, steplessly adjustable Type: 306 Year: 2017 Serial number: 868112015 Hydrostatic reel drive Automatic adjustment of reel speed Reel horizontal adjustment Hydraulic multi-quick coupler Short stubble divider Hydraulic rapeseed knife Rabolon ear lifter Header wagon TAM Leguan quattro 30 Type: SWW 30FT VIN: WEGTP28F3HAAA3318 Year: 2018 2-axle 25 km/h LED lighting set Tires: 10.0/75-15.3 Lodpfx Afezabtdjkohk Price upon collection. The item is located in 49419 Wagenfeld-Ströhen and must be collected from there by the buyer. This offer refers exclusively to the described item. Other items that may be shown here are possibly part of a different offer. Errors and omissions excepted. Inventory number: 2926-26

Condition: like new (used), Year of construction: 2026, functionality: fully functional, For sale is a Hammer circular saw-milling machine B3 Winner with a cutting length of 1250 mm. The machine is used as an exhibit in our showroom and is therefore in new condition. Technical data: - Cutting length 1250mm - Cutting width 800mm - Cutting height 103mm - 4 milling speeds - Height adjustable + swivelable - Dust extraction port Ø 120mm - 2 motors à 3 kW - Year of manufacture 2026 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Lsdpjzruvbefx Afkohk Info Tel. 06244-20299 Related terms: circular saw, milling machine, combined machine Reference: R-A0117

Condition: good (used), Year of construction: 1994, Working width 500 mm Lodpfx Afezfqknokehk Working height 240 mm Motor output 4,0 kW Length of the planing table 2470 mm Number of knives 4 St. Feed speed 7/14 m/min. machine weight ab. 1050 kg

Condition: used, Year of construction: 2021, functionality: fully functional, Format4 Dual 51 planer and thicknesser from Felder, purchased on April 29, 2021, for precise planing and thicknessing of solid wood. Powerful combination machine for professional woodworking shops. Key technical data: - Machine type: Planer and thicknesser - Model: Format4 Dual 51 - Planing width: approx. 510 mm - Thicknessing width: approx. 504 mm - Thicknessing height: approx. 3–254 mm - Planing table length: approx. 2250 mm Ljdpfx Aozulhtjfkshk - Max. chip removal: approx. 8 mm - Feed rate: Vario-Feed approx. 4–16 m/min - Cutterhead: approx. 120 mm diameter, Silent-Power spiral cutterhead also possible depending on the configuration - Motor power: approx. 5.5 kW, optionally higher depending on the configuration - Combined design saves space compared to two separate machines - Central base machine for solid wood processing, furniture making and interior design - Attractive for carpentry shops, workshops and training companies No guarantee

Condition: like new (used), functionality: fully functional, For sale is a Felder CF7-41 S Professional 4-in-1 combination machine. The machine is currently used in our showroom and is therefore in like-new condition with full warranty. Technical data: - Jointer/planer width 410 mm - 4-knife cutterblock (reversible knife system) - Swiveling planer fence 90-45° - Dual folding jointer tables - Electric planer table adjustment with LED display - 2 feed speeds 6 + 12 m/min - Circular saw and router swiveling 90-45° - Sliding table 2500 mm - Extension table with miter gauge 2600 mm - Graduated scale index for miter gauge - Router fence 230 mm with multi-adjustment system - 4 router speeds 3500/6000/8000/10000 rpm - 3-motor, 7.5 HP (5.5 kW), 400 Volt - Automatic star-delta starter The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! For information, see the telephone number on our website. Lhedpfxjzqtfle Afkjk Related terms: Combination machine, 4-in-1 combination machine, 5-in-1 combination machine, circular saw, planer, router Reference: R-D1618

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, total height: 2,600 mm, total length: 12,200 mm, total width: 2,500 mm, overall weight: 13,000 kg, Combined Heat and Power Plant (CHP), Manufacturer: STIEGELE, housed in soundproof special containers, 800 kVA Manufacturer: Stiegele Year of manufacture: 2007 Operating hours: approx. 12,000 per engine Engines: Make: 2 x Scania DC 12-54, Variant A03P Lodpfxjy Iu Hns Afkshk Engine speed approx. 1,500 rpm each Electric drive: EMK type KS160L-4-PTC Feed pump: Elektra type DD0705 Mode of operation: Palm oil (primary), Diesel / Heating oil. The CHP was designed for operation with vegetable oil (palm oil) and has been converted accordingly. For continuous operation with heating oil or diesel, technical modifications may be required. Generators: Make: 2x Marelli Type: MJB315MA4 Output: 880 kVA Touch control: Manufacturer Woodward, Type GCP-30 Dimensions (per container): Length: approx. 12,200 mm Width: approx. 2,500 mm Height: approx. 2,600 mm Weight: approx. 13,000 kg The CHP system is modularly installed in two 40" soundproof containers and has been out of operation for some time. The sale includes the containers, control system, and heating oil tank. Viewing and inspection of the system is expressly encouraged. Sale exclusively to commercial customers. Any and all liability for material defects and warranties is excluded. The machine is sold used and as inspected, with no guarantee or assurance of specific properties. Claims for damages are only possible in cases of intent, gross negligence, or injury to life, body, or health.

Condition: used, Philips Constant COMBI 010 combined planer and thicknesser for planing and precision thicknessing of solid timber. This robust combination planer is suitable for professional use in joinery workshops, carpentry workshops and timber-processing businesses. It features electronic adjustment, a Suvamatic planing guard, spare rubber rollers and an angle stop. Technical data: - Blade system: Tersa - Working width: max. 680 mm Lhjdpfx Aszrx Easfkok - Planing height: max. 260 mm - Jointer table length: 2 x 1,300 mm - Motor: 7.5 kW

Condition: used, Year of construction: 2007, 4-in-1 Combination Hammer C3-31 in good condition Year of manufacture: 2007 3 kW 3 blades Lsdpszq Ddlsfx Afkohk approx. 500 kg

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, Compact combination machine with 5 functions: sawing, milling, surfacing, thickness planing, and long-hole drilling. Sliding table, 800 mm; max. saw blade 315/100 mm cutting height; milling cutter, 3 speeds; surfacing and thickness planing, 310 mm; long-hole drilling support; year of manufacture 2002; 3 kW motors; mobile base. Lhsdpfx Ajziz E Rjfksk

Condition: used, Year of construction: 2003, equipped with Tersa cutterblock and electric height adjustment, tables measured with top precision max. 1/10 mm completely set up used top condition cleaned functionally tested partially refurbished Manufacturer: SCM Type: FS 410 Year of manufacture: 2003 Machine no.: 159435 CE type-tested GS dust-tested Number of cutters: 3 Feed rate m/min: 6 + 12 Bridge guard Slotted table lips Low-noise table lips Ljdpfxjzd Hdnj Afkshk Motorized automatic brake Tersa cutter system Rubber draw roller Digital display for planing height Electric height adjustment with fine adjustment Extraction hood integrated Motor kW: 5.5 Planing width approx. mm: 410 Planing height approx. mm: 240 Table length approx. mm: 2100 New price approx. €: 7500.00 Extraction connection mm: 100 Space requirement approx. L x W x H mm: 2100x900x1300 Weight approx. kg: 710 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.