Used circular saws for sale (117)

Condition: used, Year of construction: 2001, functionality: fully functional, CENTAURO SL 3000 longitudinal cutting saw Cutting length: 3400 mm Cutting width (max.): 600 mm Cutting height (max.): 160 mm Crsdezmf Idspfx Aqvsi Saw blade diameter: 550 mm Main motor power: 11 kW Feed rate: up to 80 m/min Machine dimensions: 5285 x 1532 x 2150 cm (H) Weight: 1500 kg Year of manufacture: 2001

Condition: used, Rema circular saw with carriage Main motor: 5.5 kW 3 cutting speeds Scoring saw: 0.75 kW Saw blade adjustable up/down and at an angle of 0-45 degrees Max. blade diameter: 400 mm Cjdez A Al Nepfx Aqvori Used machine, still in good working condition.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), -300 mm x 2600 mm max. timber cross-section -circular saw blade D 900 mm determination of the value 8.000 € new flat motor 18.5 kW / 1450 r/min with flange 4.300 € new positioning gearmotor 1.700 € new circular saw blade AKE D 900 mm, Z 120, 10% discount 8.500 € new electrical control cabinet 22.500 € without steel construction and without assembly -the special saw was only used for about 5 hours after the overhaul >>Made in West Germany 100% massive steel construction with movable portal and mounted saw unit from above, circular saw motor 18.5 kW, 1450 rpm with electronic brake travel drive 2.5 kW with frequency converter, travel speed infinitely variable saw blade max. D 900 mm, cutting height max. approx. 300 mm if the saw unit is in the basic position, the circular saw blade is in a lower protective hood and completely covered. machine overhauled without additional safety devices Crsdpfscbq Nwsx Aqvei >> The working width can also be increased by conversion

Condition: good (used), Year of construction: 2003, saw blade diameter: 450 mm, Nice under-table crosscut saw with two-hand operation and foot switch. Saw blade diameter 450 mm, max. cutting height 16 cm, with 2 roller conveyors. Crjdpfxswx R Ivo Aqvei

Condition: used, Longitudinal circular saw Longitudinal panel saw Cross-cut / longitudinal circular saw, year 1999 operates from below for lengths up to 4.7 m material thickness up to 110 mm also suitable as a travelling saw behind a production line INFO!! For such a new Flender circular saw flat motor 10 kW, you pay 4,700 EUR which is more than you pay for the entire machine at company jöma. Crsdpoq E Ivtsfx Aqvei

Condition: ready for operation (used), functionality: fully functional, 4-disc end-trimmer Trimming conveyor belt Crsdpfxezkugqe Aqvsi Operational

Condition: used, Crosscut Saw APS KS-160 Cutting width 450 mm, Max cutting height 160 mm with material width around 180 mm, Blade diameter 550 mm, Motor approx. 5.5 kW, 380 V, Material clamp, Pneumatic blade extension, Outfeed rollers 200 x 52 cm, Cedpfx Aqoxd T Uysvjri Machine dimensions 100 x 100 cm, The saw is operational and ready for use.

Condition: used, Stock of 4 circular saws for construction sites Cjdj Ahgp Hspfx Aqveri

Condition: good (used), Year of construction: 1998, Robland E45 Saw blade diameter: 450 mm Crodezznxzjpfx Aqvoi Cutting height: 150 mm Motor: 7.5 kW Saw blade can be tilted up to 45 degrees Saw blade width to the right of the saw: 1,220 mm Cutting length of the sliding table: 1,270 mm

Condition: used, functionality: fully functional, DEBIMATIC crosscut saw Crodez I It Aspfx Aqvji Machine description coming soon.

Condition: used, Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Crjdpfxozryvmo Aqvji

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Csdsr Elmwepfx Aqveri Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1982, From business liquidation: Ulmia 1710S Year of manufacture: 1982 Mitre cuts up to 45° Maximum cutting height at 90°: 75mm – at 45°: 50mm Saw blade: 250mm Table size: 630x500mm 380 Volt Cutting width to the right of the saw blade: 650mm Csdpfx Aqsxq N T Ejvjri The machine is operational, but shows heavy signs of use!

Condition: excellent (used), CATALOGUE NUMBER 8007 TECHNICAL DATA - max. diameter of the main saw blade (without scoring blade) 400mm - max. diameter of the main saw blade (with scoring blade) 300mm - diameter of the blade bore 30mm - max. cutting height for 400/300 blade, 120/70mm - spindle lock - main blade adjustable up/down and at an angle - blade guard - with side carriage - cutting length on the carriage 1600mm - cutting width with guide 1360mm - table dimensions 1100x1020mm - table dimensions with extension 2050x1850mm - with scoring blade - max. diameter of the scoring blade 100mm - diameter of the scoring blade spindle 22mm - scoring blade motor 0.55kW - 3 types of rotational speeds 2800, 4000, 5000 rpm - main motor 5.5kW - with brake Cedpfx Ajzxg Trjqveri - diameter of the dust extraction nozzle 80, 120mm - dimensions (length/width/height) 2400x3350x1500mm - weight 870kg ADVANTAGES - Polish production - blade guard - with scoring blade - used saw, very good condition Net price: 11900 PLN Net price: 2767 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to larger fluctuations)

Condition: used, Year of construction: 2022, Circular saw complex Manufacturer: WoodVER Type: UPK-1 Year of manufacture: 2022 Technical data Maximum diameter of the log being processed: 1000 mm Length of the log being processed: 2.0 - 6.5 m Saw diameter: 550 mm Saw rotation speed: 1500 (3000) RPM Power of the main motors: 2 x 18.5 kW Productivity: 12 - 20 m3 / shift - Automatic feed of the carriage with adjustable travel speed - Digital ammeter integrated into the control panel - Three-part frame with two guides for perfect geometry - Remote control with CNC system Codpfszuy Axsx Aqveri - Three-stage soft start system - Laser pointer for cutting lines - Digital cameras with an 18.5-inch display, installed in the remote control - Four hydraulic side clamps, four end clamps - Hydraulic log tilting device that performs the function of log tilting and simultaneously serves as the log centering device on the frame. - Scraper conveyor Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1993, Technical details: saw blade diameter: 250 mm saw blade drill hole: 30 mm Cutting depth: 68 mm Cutting length: 450 mm total power requirement: 2,55 kW weight of the machine approx.: 150 kg dimensions L x W x H: 0,85 x 0,86 x 1,4 m This circular saw is hand operated, equipped with a table support 400 x 860 x 22mm, relocatable, which is placed on a frame. Cjdpfx Aeu Nifyeqvsri Uses: Wood, thermosetting plastics, plaster, chipboard and other similar materials. Details of the swivel arm: Length 800mm, max. projection 580mm, swiveling 45° right/left their indication via radial scale. Sawhorse data: Feed manually (handle), tiltable 90° left their indication via radial scale, motor 380V with 2,700 rpm, protection class IP44, *

Condition: excellent (used), Catalog number: 8056 TECHNICAL DATA - max. blade diameter: 350mm - blade bore diameter: 30mm - blade guard - cutting height for a 300mm blade: 90mm - max. cutting width: 640mm - ability to cut at an angle in the vertical plane, by moving the arm or the blade - arm rotation: right/left - motor: 400V, 3kW - table dimensions: 1000x800mm - dust extraction port diameter: 50mm - dimensions (L/W/H): 1800x1100x1510mm - weight: 185kg Cjdpfx Aqeznkz Eevjri ADVANTAGES – Made in Italy – DTR documentation available – Very good condition – Used saw Net price: 7500 PLN Net price: 1744 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Year of construction: 1997, functionality: fully functional, A fully functional Vislanda 509 gang (multi) saw together with infeed centering rollers is available for sale . The outfeed conveyor with dropping slopes for side boards can be added as an option. Csdeyizz Tjpfx Aqvori

Condition: used, Euromac panel saw complete with unloading and loading roller conveyors, used. Overall dimensions: mm. 6800 x 1200 Cutting length: mm. 4600 Cutting height: mm. 150 approximately Motor power: 5,59 KW / 7,5 HP Csdeqgtbwepfx Aqvsri

Condition: used, Year of construction: 2024, Squaring machine with tilting blade Motorized blade lifting Manual blade inclination Technical data : anodized aluminum carriage mm. 3200/3800 main blade motor kW 5.5 scoring blade motor kW 1.1 max. blade diameter 350 mm blade tiltable at 45° max. cutting height with 90° blade 100 mm max. cutting height with blade at 45° 70 mm aluminum telescopic rod suspended "bridge" protection on the blade Cjdpfjtl D Ensx Aqvsri cutting width on the parallel guide mm.1500 dimensions of the fixed surface mm.1200x750

Condition: used, functionality: fully functional, Crosscut saw with marking recognition. With this saw, cross-sections of 300 x 60 mm can be cut. It was previously used in front of a compact finger-jointing machine to cut out defects according to markings. These feed units are very good and ensure safe transport, as the lower rollers are pneumatically connected (coupled) with the upper ones. Cedpfowxm Eqex Aqvjri

Condition: excellent (used), functionality: fully functional, LOESER AA 200 – Cross-cutting and chamfering machine for dowels Codpfx Aez R Tm Noqvjri Diameter range: 6–18 mm Ø Minimum dowel/rod length: 15 mm Output: approx. 2000 dowels/hour Motor power: 0.55 kW Cutting tool/blade speed: 7150 rpm

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NPC330 is a high-performance beam saw designed for fast and precise cutting of MDF, particleboard, plywood and other wood-based panels. It is the ideal solution for furniture factories seeking high throughput and consistent accuracy. The saw carriage is driven by a 2 kW servo motor with rack and pinion transmission, reaching cutting speeds up to 90 m/min and return speeds up to 120 m/min. The powerful software package includes cutting optimization, work process management, cutting simulation, error display, and automatic label printing for efficient production tracking. Key Features Cutting height: up to 120 mm Cutting width: 3270 mm Automatic pressure beam adjusts to the total height of the panel stack for maximum efficiency Air flotation table ensures scratch-free and easy panel handling 10 pneumatic clamps (optional 12) for secure fixing and precise positioning Servo side alignment for perfectly perpendicular cuts Full protection system: operator hand protection, piano-type blade cover, optional safety fence & light barrier Quick-change main saw blade and one-click scoring blade adjustment Automatic lubrication system for longer machine life and lower maintenance costs Industrial control cabinet with international brand components, 21.5” touchscreen, PC (i5 CPU, 8 GB RAM) Technical Specifications Max. cutting length: 3270 mm Max. cutting height: 90 mm (optional 120 mm) Main saw motor: 15 kW (optional 18.5 kW), 3910 rpm Scoring saw motor: 4300 rpm Crjdpfsxcwwpjx Aqvsi Main saw blade: Ø380 mm (shaft Ø60 mm) Scoring saw blade: Ø200 mm (shaft Ø45 mm) Feed speed: 90 m/min (return 120 m/min) Total installed power: 24.2 kW Machine dimensions: 6900 × 5400 × 1820 mm Weight: 4,560 kg Power supply: 380V / 50Hz / 3-phase Air requirement: 0.6 MPa Dust extraction: Ø150 mm × 3, min. speed 28 m/s Benefits for Manufacturers High productivity: package cutting with fast forward and return speed Excellent accuracy: ±0.03 mm thanks to heavy-duty frame and pneumatic clamping Digital optimization: AutoCut software included to minimize waste and optimize cutting plans Maximum safety: full machine guarding, light barrier, and emergency stop Operator-friendly: air flotation table and servo-driven feeding system for effortless panel handling

Condition: excellent (used), functionality: fully functional, MZ Project CS 1000 Optic crosscut saw Cutting width: 1000 mm Cutting height: 100 mm Saw blade diameter: 550 mm Electronic lifting and lowering of the clamping beam Automatic material feed Side discharge of cut material Infeed table length: 320 cm Outfeed table length: 255 cm Crodpszcw Icsfx Aqvji Roller width in tables: 650 mm Year of manufacture: 1999 Operating pressure: 6 bar CE marking Machine dimensions: 650 x 190 x 190 cm (H)

Condition: used, Horizontal ripsaw with input and output conveyor Hat saw: Length: 170 cm Height: 215 cm Width: 90 cm Cjdpexyhu Hofx Aqvori Motor power: 22.5 kW