Used Circular Table for sale (37,890)

Year of construction: 1991, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw Ledpfx Aajmydmbo Eshr -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: good (used), Year of construction: 2008, Table Circular Saw METABO Model: THKS 315 C / 2.80 DNB Year of manufacture: 2008 3-phase 400 Volt 50 Hz Power: 2.8 kW Blade bore: 30 mm Saw blade diameter: 315 mm Lodpfx Aasxvquue Eehr Mitre fence Mitre adjustment 45-90° Max. cutting height 90/45° Max. cutting width at parallel fence Carbide-tipped saw blade with alternate teeth Saw blade guard Table extension

Condition: new, Year of construction: 2025, cutting width (max.): 280 mm, cutting height (max.): 48 mm, saw blade diameter: 168 mm, cutting width at rip fence: 280 mm, Festool Cordless Table Saw CSC SYS 50 EBI-Set 36 Volt battery voltage, No-load speed 4,500 - 6,800 rpm, tiltable from -10° to +47°, cutting height 0 - 48 mm (at 45° = 34 mm), electric height and tilting adjustment with digital display maximum rip capacity 280 mm, sliding table with cross-cutting width up to 450 mm, miter angle stop 0 - 70°, complete with: saw blade 168 x 1.8 x 20 mm, Z = 42 tooth WD, parallel guide, push stick, angle stop, dust collection bag, riving knife for concealed cuts, riving knife with blade guard, 6 mm hex key, energy set SYS 18 V 2 x 5.5/TCL 6 DUO, stand UG-CSC-SYS Order No.: 577379 available ex stock Seevetal, promotion valid until the end of 2025, while stocks last, without shipping and packaging Lodpfx Asxzudqoa Eohr

Condition: new, Year of construction: 2025, The new F 45 is a masterpiece of technology and design. The comprehensively redesigned machine frame combines absolutely unprecedented torsion resistance with extremely low levels of vibration, while the smooth front and clear foot space on the floor enable you to operate closer to the machine and the workpiece. The famously smooth running sliding table, which has received a number of design tweaks, remains the undisputed benchmark for precision cutting and minimal maintenance. The crisp new industrial design underlines the distinctive quality of the Altendorf brand: It is an approach that brings together distinctive design and timeless aesthetics – recognised with the iF design award 2016. Altendorf’s new generation is unique in that we now have just the one model: the F 45. But this one model comes with a choice of three completely new control unit designs, each of which enables you to control up to four axes from the centrally positioned eye-level control panel. The only decision that remains for you to make is this: Which control unit shall it be? Machine equipment: - F 45 ProDrive in basic specification Lhedpsd Hz Etefx Aa Esr - Max. diameter of the disc 450 mm - 5,5 kW (7.5 HP), three speeds (3/4/5,000 rpm) - Two-axis scorer unit for one-way tilt - Sliding table, table length 3200 mm - Crosscut-mitre fence, stops to 3200 mm - CNC rip fence, cutting width 1300 mm - Duplex 1350 mm

Condition: like new (used), Year of construction: 2025, For sale: Hammer K2M3 table saw with an 800 mm cutting length. The machine has a minor transport damage and is in like-new condition. Technical specifications: - Cutting length: 800 mm - Cutting width: 600 mm - Cutting height: 80 mm - Height adjustable and tiltable - Extractable (Ø 100 mm) - Motor power: 1.9 kW - Year of manufacture: 2025 - Minor transport damage Lsdpfjxxr N Eex Aa Eshr The circular saw is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer Reference: R-A0117

Condition: used, GRAULE AGT pull and table circular saw Lhjdpfxexf Tr Uo Aa Esr

Condition: new, Year of construction: 2023, functionality: fully functional, cutting height (max.): 79 mm, saw blade diameter: 250 mm, cutting width at rip fence: 769 mm, total height: 7,900 mm, total length: 14,050 mm, total width: 15,500 mm, table width: 792 mm, table length: 508 mm, input voltage: 230 V, extraction connection diameter: 100 mm, overall weight: 120 kg, rotational speed (max.): 3,800 rpm, hole diameter of the disc: 30 mm, power: 1.45 kW (1.97 HP), The Fusion 1 model is an excellent solution for anyone looking for a compact but very accurate and high-quality saw to start with - Polished cast iron table. - Robust cast iron motor suspension. - Can be used with DADO circular saw blade set. - Two T-slot rails on both sides of the circular saw blade. - Quick and easy control and tilting of the cutting height. - Lever for quick exchange of circular blade. - Positionable main switch. - Quick attachment of the riving knife. - Additional rear table included in the price. - Sufficient power for longitudinal and cross cuts up to 79 mm in height. - Storage space for tools and rulers that are always to hand. - Type: Fusion 1 - Recommended area of application: Craftsman - Power (230 V): 1450 W - Recommended fuse switch: 13 A - Disc x clamping: 250 × 30 mm - Rotations: 3800 rotations/min. - Tilting of the disk: 0-45° - Max. Max. cutting height at 45°: 50 mm - Max. Cutting height at 90°: 79 mm - Max. Cutting width: 769 mm - Extraction: 100 mm - Cast iron table size: 508 mm × 792 mm - Overall table size: 1118 mm × 792 mm - T-slot rail dimensions: W × H 24.3 mm (19 mm), × 4.2 (10.7) - Dimensions: 1550 mm × 1405 mm × 1100 mm - Weight: 110 kg - Packaging size: - Cardboard box on its own pallet 1330 mm × 700 mm × 790 mm - Weight incl. packaging: 120 kg Scope of delivery - elongated ruler - Angled ruler - Gripper for small parts - Upper suction hood - Rear table extension Lhedpfx Ajtuurtoa Esr - Carbide circular saw blade for universal use (diameter 250/30 mm, Z40 - Hose for suction The machine is delivered partially disassembled in a transport box. The set-up time is estimated at approx. 1 hour.

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table - Saw blade movement via ball screw spindle with servomotor Lsdpfx Aedzp Snja Eshr - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: good (used), functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 70 mm, saw blade diameter: 125 mm, total height: 1,300 mm, total length: 6,000 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, type of input current: three-phase, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 6,500 mm, input frequency: 50 Hz, main saw diameter: 350 mm, overall weight: 3,500 kg, rotational speed (max.): 3,800 rpm, cutting length (max.): 4,200 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, collet bore: 75 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, year of last overhaul: 2024, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of Lsdouyvnijpfx Aa Ejhr with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable.

Condition: new, Year of construction: 2024, Saw Saw blade rotation speed 3000 / 4000 / 5000 RPM Diameter saw blade and bore 300 – 400 mm, 30 mm Sawblade tilting 90° – 45° Cutting depth at 90° / 45° 125 mm / 90 mm Cutting width parallel fence, version Z400 M, Z400 EL 1350 mm (option 1000 / 1525 mm) Cutting width parallel fence, version Z400 X1, Z400 X3 1250 (option 1500 mm) Cutting length 3500 mm (option 2500 mm / 4100 mm) Dimensions cast iron table 985 mm x 710 mm Dimensions sliding table 3200 (option 2200 mm / 3800) mm x 420 mm Dimensions cross-cut table 1420 mm x 650 mm Length of swiveling cross-cut fence 2295 mm (telescopic 3000 mm) Lhjdpfx Aasglfv Sj Esr Scoring unit Diameter scoring blade and bore 120 mm, 20 mm Cutting depth with 120 mm diameter blade 3,5 mm Scoring blade rotation speed 8200 RPM Scoring saw motor power 1,3 kW / 2 hp (S6) Weight 850 kg (Z400 – 3200) – 1080 kg (Z400 X3 – 3800) Voltage 400 V 3 phase (option 230 V 3 phase) Motor power (3 phase) 7 kW /9,5 hp (S6), option 9,2 kW / 14 hp (S6)

Condition: used, Rip saw - Saw for lengthening boards. - Manufacturer: omega T55 300 Ljdstq Eblspfx Aa Eehr - Year: 1996 - Electric motor - Frequency counter

Condition: new, Year of construction: 2025, Upgrade your timber production to a high-safety, OHS compliant saw. Lsdpomb U T Hefx Aa Ejhr A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V weight: 14,5 kg Lsdpfx Ajc Snvfea Eshr

Condition: new, Year of construction: 2025, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal Lhedemcaahjpfx Aa Eer • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Lodpfx Ajmb U T Roa Ejhr Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, High-capacity timber processing with high-powered motor and PLC controlled motion. Lhsdpfx Aasmcaawj Esr Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, No matter what job you need to cut A700 is the only saw you will ever need. Lhjdpfx Aaemb U T Uo Eor With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: used, Welding turntable – Welding positioner with enclosure Circular welding device Load capacity approx. 50 kg Chuck diameter 300 mm Chuck rotational speed 1.0–15 rpm Power supply 230 Volts, 50 Hz - Spiral scroll chuck with internally stepped jaws - Infinitely variable speed adjustment via potentiometer - Drive via geared motor, rotation direction left - Start via electrical switch - Welding current transmission via slip ring contact - Extraction connection Ø 160 mm - Internal lighting Door opening W x H 715 x 1060 mm Internal dimensions W x D x H 780 x 780 x 1100 mm Ledpfx Aasdzp U Ie Eohr Required space W x D x H 900 x 900 x 2300 mm Weight 190 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, mobile circular saw for cutting bricks with extraction Lsdpfx Ajv Ivx Tsa Ejhr

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m Ledpfx Ajxvwcxja Eshr X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Height: 80 cm (height is adjustable) Diamter: 120 cm Lhedpfxetpgxie Aa Eer

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Technical data: Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Lhsdpfxovkt N Ue Aa Esr Equipment: – elements for fixing the cardboard – module for wrapping the cover

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Lhjdpjvuk Uisfx Aa Eor

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, The machine is possible to edit to any size of the product. It customization is very simple. It has a spraying unit included. Can spray or fill liquids in to the bottles or cans / tins. Ljdpfxox Dtumo Aa Eohr

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Lhodpfxjfvqmxj Aa Ejr Hydraulic