6
ID000345Used resaw for sale ARI Kl10 circular Saw - saw blade diameter 1000 mm,- hydraulic drive,- 25 to 75 m / min,- pneumatic packer rolls,- in the feed conveyor,- conveyors for complete saw line is available,More technical information about the saw at the pictures where the information about the saw saw can be bought is located in Swedabo ase call us and we can explain how this Saw works.
Bhmxmydiv9
4
Serial No. GF1222
Blade size 360mm
Capacity Bar 120mm, I beams 203mm x 101mm
Input 415/3/50hz
Speeds 1500 - 3000 rpm
Saw head swivels 0 - 45 degrees
I9e3wud
Vice opens 130mm
Head rise and fall 210mm
Fitted with Coolant
Length 1250mm
Width 1100mm
Height 1500mm
Nett weight approx. 500 kgs
6
ID000277Used splitter resaw with two blades ARI TKL 70 - Number of blades 1-2- Saw blade diameter 500 - 700 mm- Maximum cutting depth of 180/280 mm- The feed rollers open at 2 x 250 mmShaft Speed:- Saw blade diameter 500 mm - 1750 rpm- Possibility to cut at 0 - 45 degrees- Blade diameter 700 mm - 1400 rpm- Feed speed 0-85 m / min- Main electric motor 45 kW- Hydraulic electric motor 7.5 kW- Need for compressed air:- Working pressure 6 bar- Flow rate 20 l / min- Mixing unit pressure 6 bar- Flow ra...
6
Bandsaw Canali 1100 with tilt hoist, in- and out feed, roller conveyors for package, lifting table etc.
1. Rolling conveyor with lift table
2. Tilt hoist
3. Band infeed with steering rulers
4. Bandsaw Canali 1100
5. Outfeed rollers, kick off left/rigth with dividing rulers
– – –
Category: Woodworking industry machinery
Status: Used, working condition
More info!
Bfagdawf2p
6
ID000263Used circular split saw- manufactured by Lindqvist,- model SS8,- with infeed conveyor, - max. sawblade diameter 800mm,- max. depth of cut 325mm, 42m/d spliter saw been you need more information about the equipment, please contact our manager.
H2ltmgd
15
ready for operation (used)
Moulder Waco HM 200 -75; 6-spindles and Bandsaw Stenner VHM 36
1. Roller for package 2pcs á approx. 6m
2. Rollerbench into Bandsaw
3. Bandsaw Stenner VHM 36, 75mm blade, 15hp engine
4. Outfeed rollers, approx. 8m, kick off left/rigth with dividing rulers
5. Side conveyor approx. 5m with five V-Belt
6. Rollers into moulder infeed table.. 2pcs á 4m
7. Hydr. lifttable 3000kg
8. Buffer conveyor KFM -07 with 4 chains. . Frequenscontrol up to 100m/min.
9. Moulder Waco HM 200 -75; 6-spindles, Hydr. fee...
4
ID000266ID000265Second hand board cross cut saw. 2 you need more information about the equipment, please contact our manager.
Nvl8b
15
Dyrebo Resaw- line with Stenner VHET 120 dubbel bandsaw.
1. Package intake with 4 st chain approx.: 6 m.
2. Hydr. tilt hoist with 4 st arms.
3. Stickpocket with belt conveyor approx.: 6 m.
4. Elevator with side conveyor approx. 1 m with 5 st chains.
5. In feed with belt and side boarders approx.: 6 m.
6. Controller.
7. Stenner dubbel- bandsaw VHET 120, Machine nr: AK96178.
8. Belt outfeed with shark fen and pneum.. push left/rigth.
9. Stacker with 5 st chains, 5 st fork arms and fair ending..
10...
6
ID000722Resaw ARIVislanda DS-8Manufacturer: ARIVislandaModel: DS-8Year of production: 1978Electric motor: 75 kWElectric motor: 30 kWMax cutting height: 260 mmBlade diameter: 650-800 mmMax distance between fixed blade and movable blade: 130 mmFeed speed: 22 - 30 - 45 m/minIf you need more information about the equipment, please contact our manager.
Inisyvp
4
ID000274Used circular saw Waco- can be used for cross cut,- coming with electric motor,- standing on frame which must be screwed to the you need more information about the equipment, please contact our manager.
Bjdmqzru9c
6
Eurosaw S6D shifting double arbor circular breakdown ufacturer: Soderhamn Eriksson,Year of production: 2008,Max. speed: 150 m/min,Max. block diameter: 450 x 325 mm,Min. block diameter: 75 x 75 mm,Electric motors: 4 x 200 kW,Infeed electric motor: 2 x 5,5 kW,Weight: 26 000 you need more information about the equipment, please contact our manager.
Od7qz
6
Multi rip circular saw ARI Vislanda 509Max. depth of cut: 265 mm Min. depth of cut: 75 mm Max. width of timber: 700 mm Max. distance between saws: 450 mmMin. distance between saws: 32 mmFeed speed: 30-75 m / minWeight: 6000 kgIf you need more information about the equipment, please contact our manager.
Cvng0jd7e
6
ID000348Used circular saw ARI KT5 board edger.- model KT5,- speed 80-120 m / min,- max width 300 mm,- min width 63 mm,- max height 180 mm,- both movable heads,- saw blade diameter 450 - 600 can build saw in the line or can offer feed system around sawMore technical information on the saw can be found in the pictures can offer saw line where is infeed and outfeed conveyors around edger ARI KT 5. If you need more information about the equipment, please contact our manager.
Bhmxnbuoka
3
4
Thin layer from 2 mm thickness
Maximum cutting accuracy up to ± 0.15 mm
Minimal kerf, cutting thickness from 1.3 mm
Ideal for the cutting of dried and wet wood or alternative materials
Surface of the thin layer ready for gluing without need of further processing steps
Friendly user electronic control
Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life
Optical sensor to start cutting cycle and speed change
Ground table
“Flexam” belt feed...
4
4 blade construction wood circular saw Schuhmacher overhauled
cutting height 350mm
Driven roller conveyor - extension rollers next to the saw blades
Txawdjtl
Chain infeed up to 6m timber length, with infeed mandrels that can be set up via foot switch
Feed infinitely variable
Electrical cutting width adjustment
4 pieces saw motors, power 4 x 18 kW
4 pcs. pull-out roller motors, power 4 x 0,37 kW
1 piece feed gear, power 2.2 kW
1 piece Cutting width adjustment motor, power 0.18 kW
Total power 76 k...
15
SPECIFICATIONS
Cutting Capacity 90°
Rectangular tube 9.4" x 3.3"
Round tube 6.3 inches
Cutting Capacity 45°
Rectangular tube 7" x 2.7"
Round tube 5.9 inches
Maximum Saw Blade Diameter 17.7 inches
Saw Blade Speeds (2) 10/20 RPM
Single Stroke Feed Length 59 inches
Electrics 3 HP, 3 phase
Dimensions 160" x 58" x 74"
Approximate Weight 5150 pounds
Bjrql9yqph
F.O.B. MI Shipping Point
EQUIPPED WITH
20' Bundle Loading Magazine .78" Tilting Roller Conveyor with sorting function. Beckhoff CNC Control. C...
10
cutting capacity 2,0 mm
throat 700 / 280 mm
round blank diameter max. 1.000 mm
Blfmakuqyb
round blank diameter min. 180 mm
speed 7,0 m/min
total power requirement 1,1 kW
weight of the machine ca. 350 kg
dimensions of the machine ca. 1400 x 400 x 1300 mm
2
saw blade diameter 315 / 350 mm
cutting diameter 125 mm
stroke mm
Yske8k
capacity 90 degrees: round 125 mm
capacity 90 degrees: flat 160 x 90 mm
capacity 90 degrees: square 110 mm
capacity 45 degrees: round li. 105 / re. 70 mm
capacity 45 degrees: flat li. 80 x 100 / re. 60 x 8 mm
capacity 45 degrees: square li. 90 / re. 65 mm
speeds 30 + 60 U/min
total power requirement 1,8 / 2,5 kW
weight of the machine ca. 0,2 t
dimensions of the machine ca. 0,6 x 1,22 x 1,06 m
Technical specifications:
Cutting depth: 70 mm or more
Automatic feed magazine: 9 meters (longer lengths can be fed through)
Max. automatic cutting length: 4000 mm
Cutting capacity around: 130 mm
Square tube and tube: 110x110 mm
Rectangular: 220x90 mm
Angles: +45° to -45°
Single stroke length: 2000 mm
Warehouse load capacity: 4000 Kg / 6000 mm
More info:
The machine is equipped with a programmable automatic adjustment angle setting. Both the rotation of the saw head and the saw feed are equi...
1
Technische Daten:
fly wheel DM 800 mm
Max. cutting height 400 mm
Max. max cutting width 780 mm
Pzlx7qphm
tabel dimensions 580 x 810 mm
tildable table 15 Grad
Max. saw blade dimension 80 x 0,8 mm
saw blade length 5380 - 5530 mm
motor 11,0 kW, 400 V, 50 Hz
suction 2 x 100 mm
fly wheel speed 680 U/ min
suction DM 1 x DM 100 mm & 2 x DM 120 mm
compressed air 6 - 8 bar
machine weight: ca. 850 kg
machine dimensions L x B X H 1550 x 950 x 2500 mm
welded steel structure, fully closed
pneumatic bra...
6
-Exhibition of machine-
V3ijqb
:350 x 220 mm
:270 mm
:260 mm
:240 mm
:210 mm
:240 x 160 mm
:180 x 180 mm
:220 mm
Biid8m7p9g
:180 mm
:160 mm
:150 x 150 mm
:150 mm
sawing motor:0,75 - 1,5 kW
:0,37 kW
coolant pump:0,12 kW
band speed:34 - 68 m/min
dimensions of saw-band:3.160 x 27 x 0,9 mm
work height max.:900 mm
dimensions:1.730 x 770 x 1.550 mm
weight of the machine ca.:500 kg
semi automatic:nur bei BMSY 270 DG / H
:nur bei BMSY 270 DGH
:995,- ?
5
Aluminum circular saw, chop saw, glass bead saw, aluminum chop saw, metal chop saw, chop and miter saw
-Processing: of flat, angle and solid material, tubes and special profiles
-Saw blade: Ø 350 mm
-Drive: 2.3/3 kW
Hiupxg8ns
-Speed: 1430/2860 rpm
-Dimensions: 800/900/H1600 mm
-Weight: 260 kg
5
Description:
Suitable for fully automatic brazing of carbide and PCD teeth on the body of circular saws.
Specifications:
Sawblade diameter with loading device 80 - 700 mm, saw blade diameter manual loading up to 820 mm, rake angle -10° to +30°, carbide tooth length 4 - 13 mm, carbide tooth width 1.3 - 9 mm, power HF generator 5.6 KW, Soldering performance up to 16 teeth / min., Connected load 400 V / 50 Hz, dimensions w x d x h = 2050 x 2247 x 2070 mm, weight approx. 1350 kg, colour light grey R...
Saw blade Ø: 315/350 mm x 3.5 mm
Smallest section length: 7 mm
Gate length: 7-99 mm
Cutting speed: 6-52 m / min
Main drive: 10 kW
Rapid traverse saw carriage: 5.000 mm / min
Jwhev3
Cutting feed: 16-600 mm / min
15 transport rollers
chip conveyor
center lubrication
4
saw blade diameter 900 mm
Nxjkd
cutting diameter 350 mm
weight of the machine ca. 1,3 t
7
quill stroke 700mm
table Ø 500mm
L x W x H
1200 x 1300 x 2380 mm
The machine is electrically and mechanically tested before sale and receives a DIN VDE 0113 test report, which is part of our service.
The MMV Group offers you the right financing especially for our products.
Calculate now with MMVfinrate easily online your monthly rate.
Eorvwjxko
On request you will receive your personal financing offer and competent advice.
9
saw blade diameter 350 mm
cutting length 430 mm
cutting diameter 135 mm
turning speeds 3.800 U/min
Dust suction hood 100 mm
dimensions of saw-blade 350 x 3,0/2,4 x 40 mm
Mqvkuja
total power requirement 3,0 kW
weight of the machine ca. 100 kg
dimensions of the machine ca. 1,6 x 1,0 x 2,0 m
6
- exhibition machine -
swiveling,
Rip fence with fine adjustment
----- Technical data -----
Suction connection Ø: 120 / 60 mm,
Work table height: 900 mm,
Speeds: 4,000 rpm,
max. saw blade Ø: 315 mm,
Ucbyvjk
Cutting width with rip fence: 900 mm,
Cutting height 90/45°: 100 / 79 mm,
Cutting length: 1,600 mm,
Swivel range: 90 - 45 °,
Table dimensions (LxW): 1,020 x 325 mm,
Weight: 295 kg
7
Specifications: Saw diameter max. Ø (40) 130 - 850 mm, saw diameter (unmanned) max. Ø (75) 130 - 520 mm, tooth pitch 1 - 40 mm, tooth height max. 17 mm, number of teeth 2 - 998, saw blade thickness up to 8 mm, loading capacity 40 saw blades, grinding wheel diameter (CBN or DIA - 14F1) Ø 200 mm, grinding wheel bore Ø 32 mm, coolant pressure approx. 6 bar, coolant tank approx. 300 l, grinding motor 3 kW, Connected load approx.6.5 kW (400 V / 50 Hz) 8.9 kVA), weight approx. 2000 kg net, dimensions ...
2
Circular table saw FROMMIA,
Cutting height approx.: 90 mm,
saw blade diameter max. approx.: 300 mm.
2aqfhnmz
4
saw blade diameter 90 mm
Bie7qexsho
cutting diameter 140 mm
miter ja
voltage 380 V
ja
weight of the machine ca. 300 kg
1
- NEW -
Description:
- DIY machine with maximum cutting depth 80 mm
Top price-performance
- Large machine table made of steel, galvanized as standard
against corrosion
- Table extension standard
- Saw blade pivoting from 90 ° to -45 ° to the left, precise,
Accurate and easily adjustable via handwheel and scale
- Height adjustment of the saw blade via handwheel
- Stable suspension of the saw unit front and rear
Bn0ihdtgoe
enables precise cuts
- Powerful motor with thermal overload protectio...
10
saw blade diameter 420 mm
cutting diameter 200 mm
Bjemqolrc
Cutting height at 45° 140 mm
hole of sawblade 50 mm
total power requirement 5,0 kW
Dust suction hood 100 mm
weight of the machine ca. 310 kg.
range L-W-H 1,6 x 1,0 x 2,0 m
1
L x W x H : 725 x 1050 x 1080 mm
Weight : 95 kg
Motor : 400 V / 3Ph
input power : 5,2 kW
Peripheral speed : 53 m/s
Saw blade - Ø = 700 mm
Accessories :
Bqaofzxtwk
Chrome steel - saw blade
5
saw blade diameter:400 mm
cutting diameter:140 mm
total power requirement:5 kW
weight of the machine ca.:1,75 t
sawing motor:1,6 / 2,5 kW
min. workpiece diameter:10 mm
cutting length min.:10 mm
minimum remnant length (90 ° cuts):100 mm
cutting speed:11 / 22 m/min
The used Kasto GKS 400 AU cold circular saw is equipped with a feed gripper for automatic profile sawing. The compact Kaste circular sawing machine has a circular saw blade working from bottom to top. An aluminium clamping frame holds ...
3
cutting width 160 mm
P7lfjn
Cutting height 280/200 mm
Motor output 9 kW
weight of the machine ca. 2,2 kg
Cutting length 0- 3000 mm
saw blade diameter 500 mm
cutting diameter 180 mm
stroke 180 mm
control C 2001
total power requirement 10 kW
dimensions of the machine ca. 4,6 x 1,5 x 2 m
Double mitre-cutting machine with PC control Beckhoff C 2001. Machine comes
with roller table and exhaust ventilation. Machine was used for wood, plastic
and aluminium cutting.
10
Very well maintained automatic sharpening machine for circular saws and band saws.
Oswst
Saw blade diameter from 200 - 1500 mm. With straight and bevel grinding.
Tooth pitch up to 70 mm. Grinding wheel diameter 250 mm.
Tooth height up to 45 mm. Feed speed 30 and 70 Z / min.
3 switchable tooth forms.
Ball bearing mounted grinding head / backlash free. Extraction. With clamping device for circular saws, on request also dividing disc device. Machine overhauled in 2004.
3
saw blade diameter 275 mm
cutting width 70 mm
Cutting height 85 mm
Cutting height at 45° 70 mm
cutting capacity - flat 95 x 60 / 90° mm
cutting capacity - round 85 / 90° mm
cutting capacity - square 70 x 70 /90° mm
cutting capacity - flat 70 x 55 / 45° mm
cutting capacity - round 70 / 45° mm
cutting capacity - square 60 x 60 /45° mm
saw blade turning speeds 60 + 120 U/min
voltage 400 V / 50 Hz
Motor output 1,0 / 1,4 kW
Bt7jubog
machine weight ab. 250 kg
Dimensions (L/W/H) 980 x 790 x 780 mm
...
10
saw blade diameter 410 mm
cutting diameter 170 mm
turning speeds 3.500 U/min
Mbb3tb7b
Dust suction hood 100 mm
dimensions of saw-blade 420x3,2/2,4x40 mm
total power requirement 3,0 kW
weight of the machine ca. 120 kg
dimensions of the machine ca. 1,6 x 1,0 x 2,0 m
5
serial number 301142
Bjdl87ldng
cutting diameter 160 mm auf 90 Grad mm
saw blade diameter 450 mm
feed Automat/automatisch
weight of the machine ca. 2,9 t
5
Aluminum circular saw, miter saw, glass bead saw, aluminum saw, underfloor aluminum miter saw machine
Fffv2tk
-Processing of: flat, angle and solid material, pipes and special profiles
-Saw blade: Ø 350 mm
-Drive: kW
-Speed: 900/1700 rpm
-Dimensions: 900/520/H1280 mm
-Weight: 150 kg
2
used, good condition
manufactured by Steton
type SC 400 / 3200
CE tested for type examination
motor increased 6,5 kW
sliding table length ca. 3200 mm
cut width ca. 1300 mm
max. blade diameter 400 mm
tiltable to 45°
scoring unit
Bn0ivnlupu
parallelogram protection
operating panel top
rip fence with automatic control
extended table length ca. 400 x 800 mm
height adjustment electrical
tilting adjustment electrical
positioning control system 1 axis
digital display:
- cutting angle
- rip fence
- rpm...
6
saw blade diameter 275 mm
cutting diameter 110 mm
total power requirement 1,3 / 1,8 kW
weight of the machine ca. 220 kg
Saw blade diameter 275 mm
Cutting diameter 110 mm
Cutting area at 90 degrees: flat 90 x 60 mm
Cutting area at 45 degrees: flat 70 x 50 mm
Cutting area at 45 degrees: around 70 mm
Vise 120 mm
Speed 45/90 rpm
Engine 1.3 / 1.8 KW
Dimension HxWxD 1700 x 800 x 1100 mm
Weight 220 kg
Bupy38ie
Equipment:
- Metal circular saw
- 2-step gearbox engine
- Double miter circular saw up t...
6
Mitre crosscut saw, circular saw for aluminium PEDRAZZOLI type PERRIS 350
No. 9102922 Year of construction approx. 1995
Saw blade diameter 350 mm
Sawing range at 90° Round Ø 120 mm
Sawing range at 90° square 100 x 100 mm
Sawing range for 90° rectangle 150 x 100 mm
Sawing range at 45° Round Ø 120 mm
Sawing range at 90° square 100 x 100
Sawing range at 45° rectangle 120 x 100 mm
Mitre cut +/- 45° tiltable
Saw head 45° tiltable
Working height 850 mm
Compressed air supply approx. 2 to 6 bar
Saw blad...
10
saw blade diameter 500 x 32 x 4,0 mm
capacity 90 degrees: flat 230 x 180 mm
capacity 90 degrees: square 135 x 135 mm
capacity 45 degrees: flat 165 x 180 mm
capacity 45 degrees: square 115 x 155 mm rechts
turning speeds 3.580 U/min
total power requirement 3,1 kW
weight of the machine ca. 250 kg
dimensions of the machine ca. 980 x 1130 x 1430 mm
Ceg28cb3