Used cNC lathes up to 199mm turning diameter for sale (269)

Condition: ready for operation (used), Year of construction: 1983, overall weight: 4,400 kg, number of axes: 3, This 3-axis NILES DLZ 630 V x 2000 was manufactured in 1983. It features a turning diameter over bed of 630 mm and over support of 340 mm, with a turning length of 2000 mm. The spindle speed ranges from 22.5 to 1120 rpm across 18 steps. Total power requirement is 15.0 kW, and it includes multiple steady rests and face plates. If you are looking to get high-quality turning capabilities consider the NILES DLZ 630 V x 2000 machine we have for sale. Contact us for more information. • Turning diameter over bed: 630 mm • Turning diameter over support: 340 mm Hjdjx Imrcjpfx Aalsfd • Turning length: 2000 mm • Centre height: 290 mm • Clearance: 70 mm • Spindle speed range: 22.5–1120 rpm (18 steps) • Feed, longitudinal: 0.036–2.5 mm/rev • Feed, transverse: 0.018–1.25 mm/rev • Total power requirement: 15.0 kW • Transport dimensions (LxWxH): 5.0 x 1.35 x 1.5 m • Tailstock taper: MK5 Additional equipment • 400 mm tapered bar chuck • 1 face plate, D=630 mm • 2 face plates with cross slots • 2 large steady rests (340 mm capacity) • 2 steady rests (center type) • 1 travelling steady rest • Heidenhain position indicator (DRO) • Various tool holders • Tool cabinet with tool holders • Steady rest box

Condition: ready for operation (used), Year of construction: 1989, This MORI SEIKI SL 25 was manufactured in 1989. It is a horizontal turning machine equipped with a three-jaw chuck, dead-collet head, chip conveyor, and tailstock. Clamping wedges for tools are also included. Consider the opportunity to buy this MORI SEIKI SL 25 horizontal turning machine. Contact us for more information. • Tailstock Additional equipment • Three-jaw chuck and dead-collet head 185e • Chip conveyor • Clamping wedges for tools Hsdpfx Aox D R Rrealsfd

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: SIEMENS, controller model: 840D Powerline, number of axes: 4, This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information. Additional equipment Hfedpfx Ajx D R Hgsalod • PCU 50 • Y-axis • KSA pump • Hollow clamping cylinder 65 mm • Counter spindle with ejector cylinder • Parts catcher • Discharge conveyor • Sauter star turret with angled tools • Preparation bar loader Machine Benefits Technical Machine Benefits • In the event of sale, some tool holders, including driven tools, would also be sold. Extra Information The machine was completely dismantled, cleaned, checked for all functions, and overhauled by Eichten Werkzeugmaschinen GmbH in December 2023 before it was put into operation. It is therefore technically in perfect condition.

Condition: ready for operation (used), Year of construction: 2018, operating hours: 23,000 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 560 mm, number of axes: 2, This Hyundai Wia L230LA was manufactured in 2018. It features X-axis travel of 220 mm, Z-axis travel of 560 mm, a swing over the bed of 600 mm, and a swing over the carriage of 355 mm. Spindle speed reaches up to 4000 RPM. Two units available. Contact us for more information. • Swing over bed: 600 mm Hfjdpfxeyf Hqrs Aalod • Swing over carriage: 355 mm • Availability: 2 machines Additional equipment • Chip conveyor: not included • Other accessories: not specified

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 3,400 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, total height: 2,000 mm, controller manufacturer: HAAS, number of axes: 2, This HAAS SL-30HE was manufactured in 2007. A robust horizontal turning machine featuring a turning diameter over bed of 762mm and a length of 860mm. It includes a VDI tool turret with 12 positions and a chip conveyor. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Turning diameter over bed: 762 mm • Tool turret vdi: 12 tool positions • Turning length: 860 mm Hjdpfxsyar Tho Aalofd Extra Information Machine still under power Dimensions Machine Depth 3300 mm

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,400 rpm, total height: 1,900 mm, controller manufacturer: HAAS, number of axes: 2, This HAAS SL-30TBHE was manufactured in 2008. A robust horizontal turning machine featuring a spindle speed of 3400 1/MIN, 22 kW motor power, and a swing over bed of 762 mm. It includes a 12-position turret, hydraulic tailstock, and both 3 jaw and collet chucks. Dimensions are 3900x2000x1900 mm. Consider the opportunity to buy this HAAS SL-30TBHE horizontal turning machine. Contact us for more information. Additional equipment • 2-step gearbox • 3 jaw chuck + collet chuck • Barfeed magazine Samsys Machine Benefits Technical Machine Benefits • Maximum cutting diameter: 432 mm • Maximum cutting length: 864 mm • Distance between centres: 610 mm • Turret 12 positions • Hydraulic tailstock Extra Information Hjdpjyar Tujfx Aalsfd Machine still under power Dimensions Machine Depth 3900 mm

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 300 mm, travel distance Z-axis: 1,000 mm, total height: 1,830 mm, overall weight: 7,200 kg, product length (max.): 5,570 mm, This MNT 430 horizontal turning machine was manufactured in 2005. It features a maximum turning diameter and swing of 460 mm, with a turning length up to 1000 mm. Equipped with a Siemens SINUMERIK CNC control, it supports various systems for precise operations. The spindle speed can reach up to 3000 rpm, powered by a 22 kW motor. Contact us for more information about this machine. • Spindle Speed: 0–3000 rpm • Spindle Motor Power: 22 kW • Rapid Traverse X-axis: 15 m/min • Rapid Traverse Z-axis: 15 m/min • Maximum Turning Diameter: 460 mm • Maximum Swing Diameter: 460 mm • Maximum Turning Length: 1000 mm • Maximum Distance Between Chucks/Attachments: 1300 mm Hsdpfx Ajx T A Uwsaljfd • Standard Chuck Diameter: 315 / 350 mm • Spindle Bore Diameter: 82–102 mm • Front Spindle Bearing Inner Diameter: 120–140 mm • Spindle Nose Type: ISO A8 • CNC Control: Siemens SINUMERIK • Compatible Systems: 805 / 810 / 840 • Siemens Drives with Variable Speed Control • Note: The provided information has been summarized and organized according to the relevant machine specifications and capabilities. Dimensions Machine Depth 2040 mm

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 6,000 rpm, This HAAS SL-10 HE was manufactured in 2007. It is a horizontal turning machine featuring a maximum cutting diameter of 173 mm and a length of 406 mm. Equipped with a 3-jaw chuck and 12 tools, it operates at a spindle speed of 6000 RPM. Consider the opportunity to buy this HAAS SL-10 HE horizontal turning machine. Contact us for more information. Hfedpfx Asx Uqnboalod • Maximum Cutting Diameter: 173 mm • Maximum Cutting Length: 406 mm • Number of Tools: 12 • 3-jaw chuck

Condition: ready for operation (used), Year of construction: 1990, operating hours: 51,392 h, total height: 1,700 mm, overall weight: 1,300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Additional equipment • Multifix holder B mounted • Fixed steady rest (option) clamping range: 15-100 mm • Moving steady rest (option) clamping range: 10-85 mm • Collets ranging from 3- mm (increments of 0.5 mm) Hfsdsyaimfepfx Aaljd • Tailstock with an MK3 chuck Machine Benefits Technical Machine Benefits • Drive power 100% / 60% ed: 9/11 kw • Max. Torque on the turning spindle: 180 nm • Total speed range: 1-4500 min⁻¹ • Feed drive: three-phase ac feed drives • Feed range longitudinal: 0-20 mm/rev • Ellganggeschwindghell longitudinal/plan: 10/7. 5/5/3. 5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Inner taper of quill: mk 3 Extra Information Swing diameter over facing slide: 160 mm Bed width: 240 mm Sliding movement of the facing slide: 180 mm Bed slide guide length: 395 mm Turning tool cross-section (height/width): 20 x 20 mm Spindle head according to DIN 55027 Gr. 5 Spindle diameter in the front bearing: 70 mm Inner taper of the main spindle: Mk 5 Workpiece Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: mm DP thread range: 1-224 G/" Number of threads max.: 50 Dimensions Machine Depth 1800 mm

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 Hsdpfxeyalpco Aalefd • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Condition: ready for operation (used), Year of construction: 2018, This Okuma Genos L 300E-MY-e was manufactured in 2018. A robust horizontal turning machine located in Italy, it features a 450 mm maximum swing and a workable length of 1020 mm. The spindle supports a speed of 3000 RPM with a bar capacity of 65 mm. Equipped with a 12-position turret and motorized tool spindle capable of 5000 RPM. Contact us for more information about this machine. Additional equipment • Spindle Speed (Motorized Tool Spindle): 5000 rpm Machine Benefits Technical Machine Benefits • Maximum swing: 450 mm / workable diameter: 340 mm / maximum workable length: 1020 mm / bar capacity: 65 mm Hsdoyalp Nspfx Aalsfd • Turret type: 12 ut vdi / number of tools: 12 • Spindle speed (main spindle): 3000 rpm / spindle nose: asa 8 / spindle bore: 65 mm

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Z-axis: 370 mm, spindle motor power: 11,000 W, overall weight: 2,800 kg, controller model: MSX -805II, number of axes: 2, This MORI SEIKI CL2000B was manufactured in 2008. A robust horizontal turning machine featuring a max turning diameter of 440 mm and length of 363 mm. It includes a 10-station turret and an 8-inch chuck. The control system is the Mori Seiki MSX-805II. Consider the opportunity to buy this MORI SEIKI CL2000B horizontal turning machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Max turning length: 363 mm • Max turning diameter: 440 mm • Through spindle hole diameter: 73 mm • 8-inch chuck size Hodex U Dlaspfx Aalsfd Extra Information Machine still under power Dimensions Machine Depth 1975 mm

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 2,500 rpm, total height: 1,850 mm, overall weight: 3,500 kg, controller manufacturer: FAGOR, number of axes: 2, This Pinacho Taurus 260 was manufactured in 2000. A robust horizontal turning machine, it features a maximum turning length of 1500 mm and a diameter of 520 mm. Equipped with a spindle speed of up to 2500 1/min and a main spindle power of 11 kW, it includes accessories like steady rests, a hydraulic chuck, and tool holders. Consider the opportunity to buy this Pinacho Taurus 260 horizontal turning machine. Contact us for more information about this machine. • Max. turning length: 1500 mm • Maximum turning diameter: 520 mm Hodpfx Aajx U Dmqolofd • Maximum number of tools: 8 pcs • Note: Hydraulic unit not included; machine was used with a manual chuck. Additional equipment • Steady rests (2 pcs) • Hydraulic chuck (requires hydraulic unit; not included) • Tool holders • Machine documentation Dimensions Machine Depth 4000 mm

Condition: ready for operation (used), Year of construction: 2025, spindle speed (max.): 3,000 rpm, travel distance X-axis: 355 mm, travel distance Z-axis: 750 mm, spindle motor power: 26,000 W, total height: 1,997 mm, overall weight: 6,400 kg, controller manufacturer: FANUC, controller model: i Series – Smart Plus, product length (max.): 3,506 mm, number of axes: 2, This Hyundai Wia L300C was manufactured in 2025. It features a swing over the bed of Ø750 mm, a maximum turning diameter of Ø500 mm, and a turning length of 720 mm. The spindle supports a bar capacity of Ø90 mm and operates at speeds up to 3000 rpm. Ideal for precision turning with its robust 12-tool turret and rapid traverse rates. Consider the opportunity to buy this Hyundai Wia L300C horizontal turning machine. Contact us for more information. • Condition: Original packaging, 0 operating hours • Capacity: • Swing over bed: Ø750 mm • Swing over carriage: Ø480 mm • Max. turning diameter: Ø500 mm • Max. turning length: 720 mm • Bar capacity (main): Ø90 mm • Bar capacity (sub): Ø102 mm Hfjdpfx Aajycwlnoled • Chuck size (main): 12" • Chuck size (sub): – • Spindle (main): • Spindle bore: Ø102 mm • Torque (max/cont.): 1,131/957 Nm (834.2/705.8 lbf·ft) • Spindle type: Belt + 2-step gear • Spindle nose: A2-8 (A2-11) • Feed: • Travel (X/Z): 355/750 mm • Rapid traverse rate (X/Z): 20/24 m/min • Slide type: Box guide • Turret: • Number of tools: 12 • Tool size (OD): Ø25 mm • Tool size (ID): Ø50 mm • Indexing time: 0.3 sec • Tank capacity: • Coolant tank: 220 l • Lubricating tank: 1.8 l • Power supply: • Electric power supply: 30 kVA • Thickness of power cable: Over 35 mm² • Voltage: 220/60 (200/50)

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,000 rpm, travel distance X-axis: 640 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 67,000 W, total height: 2,591 mm, total width: 2,199 mm, overall weight: 21,000 kg, product length (max.): 6,300 mm, tool weight: 5,000 g, swivel angle B-axis (max.): 360 °, swivel angle C-axis (max.): 360 °, number of axes: 4, This 4-axis Index G 400 horizontal turning machine was manufactured in 2008. It features a maximum turning diameter of 630 mm, a length capacity of 2000 mm, and supports a workpiece weight up to 300 kg. Equipped with a high-speed milling spindle at 6000 rpm and a main spindle speed of 3000 rpm, it offers robust machining capabilities. Consider the opportunity to buy this Index G 400 horizontal turning machine. Contact us for more information. Hfodpjx D D Ecefx Aaled Main spindle 0102 direct driveMaximum material throughput: 102 mmMaximum speed: 3000 rpmFront bearing diameter: 170 mmVariable hollow shaft motorPower at main spindle D102:Power at 100/40% duty cycle: 53 kW/68 kWTorque: 675 Nm/900 NmWork spindle alignment and switching device D1022.5° increments via indexing discHydraulicly actuated hollow clamping cylinder D102 with analog clamping stroke monitoringMaterial clearance: 102 mmStroke: 48 mmMaximum clamping force (tension/compression): 10,900 dNMulti-clamping pressure deviceClamping pressure adjustable from 8 to 80 bar via a multi-stage parts catalog for the main spindle clamping cylinder. Chuck release movement required for transitioning to a lower clamping l carrier 1 (standard equipment)Cross slide X, Z, turning length 2000 h internal coolant supply and shut-off valve, ball screws D=40 mmin the X-axis, D=50 mm in the Z-axis. Axis drives protected by overload clutches, counterweight in the s X ZWorking travel mm: 320 2000Rapid traverse speed m/min: 20 40Feed force N: 14000 14000X-axis measuring system: Glass scale (absolute)Z-axis: ROQ encoder (absolute)X-Y-Z-B housing (WT1)Turret with AC motor, positioned by spur gears, hydraulically lockedY-axis quill, hydrostatically mounted, lockable via spur gearsBall screw, D=40 mmOverload clutchTravel: 220 mmRapid traverse speed: 12 m/minFeed force: 24,000 NROQ encoder (abs)B-axis drive with AC motorSwivel angle: 360°Tool drive unitwith two clutches:Maximum speed: 6,000 rpmPower (25%) at n= 6,000: 17 kWMaximum torque (25%): 37 NmDisc turret with 12 stations on cross slide 1Tool holder system DIN 69880-40x63Increased repeatability during tool changes due to additional W-slotsMultifunction unit on cross slide 1Maximum speed: 6,000/1,500 rpmGearbox: i=4Torque: 36/144 NmTools: SK50Front bearing diameter: 75 mmInternal coolant feedthrough, disc spring clampingTool carrier 2, right - X, ZTurning length 2000 mm, preferably oncounter spindle machine with internal coolant supply and shut-off valve, turret control via AG motor, ball screws D= 50 mm for Z-axis, D= 40 mm for X-axis. Axis drives protected by overload clutches, counterweight system in ret head oriented to the right towards the counter s X ZTravel mm 210 2000Rapid traverse speed m/min 20 40Feed force N 8600 14000X-axis measuring system: glass scale (abs)Z-axis: ROD encoder (abs)Disc turret with 10 on cross slide 2Tool holder system DIN 69880-40x63Increased repeatability during tool changes thanks to additional W-slotsPositioned by face gearing, hydraulically lockedCounter spindle D102, size 11-DIN 55026/55021 and ISO 702/1Turning length 2000 mmZ-axis slide driven by AC motor and 50 mm diameter ball screwAxis drive protected by overload clutchIn the working position, the slide is held against the stop by the AC motor.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 245 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 1,270 mm, overall weight: 6,300 kg, controller manufacturer: FANUC, controller model: 18i-TB, This 3-axis DOOSAN Puma 2500XLY horizontal turning machine was manufactured in 2008. It offers robust performance for precision turning operations. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2500XLY machine we have for sale. Contact us for more information. Additional equipment Hfsdsx D H Aqjpfx Aalod • Documentation/manual Machine Benefits Technical Machine Benefits • Turning length: 1270 mm • Turning diameter over cross slide: 334 mm • Turning diameter: 334 mm • Spindle bore: 86 mm • Tool holder: 55 mm • Speed infinitely adjustable Extra Information Machine still under powerClamping range 30–150 mm Maximum opening 170 mm

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 6,000 rpm, spindle motor power: 11,100 W, overall weight: 3,500 kg, controller manufacturer: FANUC, controller model: 0i-T, number of axes: 2, This DAEWOO Puma 160 was manufactured in 2004. A robust horizontal turning machine featuring a Fanuc 0i-T control system, it supports a turning diameter up to 160 mm and a length up to 250 mm. With a spindle speed of up to 6000 rpm and a main motor power of 11.1 kW, it's ideal for precise operations. Machine weight ranges from 3,000 to 3,500 kg. Contact us for more information about this machine. Additional equipment • Included in the offer: A set of tools. Hfedpfx Aoyar Eqoalsd Machine Benefits Technical Machine Benefits • Turning diameter: up to 160 mm • Turning length: up to 250 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 2,000 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 1,105 mm, spindle motor power: 35,000 W, controller manufacturer: FANUC, number of axes: 2, This DOOSAN PUMA 4100 B horizontal turning machine was manufactured in 2019. It features a maximum turning diameter of 550 mm and a maximum turning length of 1,042 mm. With a spindle speed of 2,000 rpm and 10 tool stations, it offers efficient machining capabilities. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 4100 B machine we have for sale. Contact us for further details. • Swing over bed: 790 mm • Swing over carriage: 590 mm • Recommended turning diameter: 380 mm • Maximum turning diameter: 550 mm • Maximum turning length: 1,042 mm Hsdpfx Aaoyhdbgjlefd • Bar diameter: 116.5 mm • Spindle nose: ASA A2#11 • Front spindle bearing diameter: 180 mm • Spindle bore diameter: 132 mm • Number of tool stations: 10 • Maximum tool size (external): 32 x 32 mm • Boring bar diameter: 60 mm • Indexing time: 0.25 sec • Rapid feed X-axis: 16 m/min • Rapid feed Z-axis: 20 m/min • Quill diameter: 120 mm • Motorized quill bore taper: MT#6 • Quill travel: 120 mm

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 2,350 mm, number of axes: 4, This 4-axis DN SOLUTIONS LYNX 2100MB was manufactured in 2022. As new, showroom model. It features a maximum spindle speed of 4,500 RPM and a chuck size of 8" (204 mm). The machine is equipped with a tool turret with 12 stations and a bar capacity of 65 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100MB horizontal turning machine we have for sale. Contact us for further details. • As new, showroom model Hjdpjyrt E Nsfx Aalsfd • Chuck size: 8" (204) • Bar capacity: 65 mm • Y travel: 30 / 36 mm • Turret stations: 12 • Turret interface: BMT 45 • Guideway type: Linear guideway • Cooling system: Coolant pump 7 bar • Design: High-performance compact turning center with a space-saving design • Productivity: Fast idle times; tool turret with BMT interface • Application: Suited for producing small parts with high precision Additional equipment • Bar feeder interface • Chip conveyor • Parts catcher • Tool setter (electric) • Oil skimmer • 3-color signal light Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 3,400 rpm, number of axes: 4, This 4-axis HAAS ST-30Y horizontal turning machine was manufactured in 2020. It features C+Y-axis capability, a 3,400 rpm A2-6 spindle, and a 12-station BMT65 turret. The machine is equipped with an automatic tool presetter, bent-type chip conveyor, and programmable tailstock. The machine can be inspected under power and test cuts are possible upon request. Contact us for further details. • Running hours: 556 h • C+Y-axis • 3,400 rpm A2-6 spindle • 12-station BMT65 turret • Programmable Tailstock Additional equipment • Bent-Type Chip Conveyor • Oil skimmer • Exhaust system • Automatic Tool Presetter (ATP) • WIFI camera Hodpfx Aajyh Hw Isljfd • Remote Jog Handle

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. • 2 turrets (12 + 12 tool positions), all motorized-capable • Bar passage: 65 mm • Both spindles in very good condition Hjdpfx Aasyaqr Aoljfd • New hydraulic/power unit pump Additional equipment • Cucchi Pietro bar feeder • 14 driven tools • 14 tool holders

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: FANUC, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. • Max. swing over bed: approx. 400 mm • Max. turning diameter: approx. 400 mm • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm Hfjdoybbiujpfx Aaljd • Spindle • Main spindle: horizontal • Spindle bore: approx. 105 mm • Spindle nose: A2-type (depending on configuration) • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Axes • X-axis: cross slide • Z-axis: longitudinal slide • CNC-controlled feed and rapid traverse • Tool system • Turret: CNC tool turret • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,084 h, spindle speed (max.): 4,000 rpm, spindle motor power: 25,500 W, controller manufacturer: SIEMENS, controller model: 840D SL with ShopTurn, number of axes: 3, This 3-axis DMG MORI CLX 450 V6 was manufactured in 2022. It features a Siemens 840D SL control, a main spindle with a maximum speed of 4000 rpm, and a counter-spindle reaching 5000 rpm. The machine includes a 12-position servo turret with driven tool stations and a Y-axis stroke of ±60 mm. If you are looking to get high-quality turning capabilities, consider the DMG CLX 450 V6 machine we have for sale. Contact us for more information. Hedpfsx E D Uvox Aalefd • General configuration: CNC turning center with X, Z, C axes; Y-axis ±60 mm; counter-spindle; driven tools • Operator panel: DMG MORI SLIMline multi-touch, 19″ • Control: Siemens 840D SL with ShopTurn • Main spindle: A2-8"; 17/25.5 kW (100%/40% DC); max 4000 rpm; through-spindle clamping; max bar capacity Ø 80 mm • Counter-spindle: A2-6"; built-in motor spindle ISM 52; 13/14 kW (100%/40% DC); max 5000 rpm; non-through clamping • Tool turret: 12-position servo turret, VDI 40; 12 driven tool stations (DIN 5480 coupling); capability to mount 6 BT holders on turret periphery; TRIFIX precision coupling • Measuring systems: Direct measuring systems on X, Y, Z (Z with air-purge option) • Axes and performance: Y-axis stroke ±60 mm; C-axis on both spindles; high-precision 45 mm linear roller guides; increased rigidity for heavy-duty turning Additional equipment • Chip conveyor (chip discharge to the right) • Coolant gun, 5 bar • Optional high-pressure coolant system • Optional oil mist extractor AFS 600, 600 m³/h, H13 filtration class • Manual tool measuring probe (MARPOSS) • Optional direct measurement system for Z-axis with purge • Y-Axis Parting Cycle option (V4/V6) • Pressure-differential clamping for main spindle • External chuck flushing (main and counter-spindle) • 4-colour signal tower • Setup package included (C-P7223F) • The machine is ready for connection to a bar feeder.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Additional equipment • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Technical Machine Benefits • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm Hfodjx D Ezfspfx Aaljd • Type: vdi turret with 12 tool stations • Type: programmable hydraulic tailstock • Preparation for robot / driven tools

Condition: ready for operation (used), Year of construction: 2015, operating hours: 12,244 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 740 mm, spindle motor power: 11,000 W, total height: 1,620 mm, overall weight: 4,200 kg, controller manufacturer: SIEMENS, controller model: 840D-SolutionLine, number of axes: 2, This 2-axis SPINNER TC 600-65MC horizontal turning machine was manufactured in 2017, featuring a Siemens 840D control system and a 16-position indexing turret. It includes a main spindle with a speed of up to 4,000 rpm and a power of 24 kW. The machine offers a swing diameter over bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to buy this SPINNER TC 600-65MC horizontal turning machine. Contact us for more information about this machine. Additional equipment Hsdjx D E Hnspfx Aaljfd • Full splash guard cladding + coolant unit • Work area light + pneumatic equipment • Panoramic window for optimum visibility into the work area Machine Benefits Technical Machine Benefits • Center distance: approx. 600 mm • Max turning diameter: 310 mm • Torque: main spindle (fanuc, s6 40%) 178 nm, main spindle (siemens, s6 40%) 301 nm • Quill stroke: 120 mm • Adjustment travel: 475 mm • Speed of rotating tools: 6000 1/min • Driven tool power: (fanuc, 30 min) 3. 7 kw, (siemens, 40%) 6. 0 kw Extra Information Media Pneumatics max. operating pressure: 10 bar Normal pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Unit Control system: Standard Siemens 840D, Option Fanuc 21i Operating voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feed (electric)