Strutted grey cast iron machine bed
Complex spindle bearing arrangement
Emergency stop pushbutton
-including MM+ Siemens Manual Machine Plus
-incl. BISON three-jaw lathe chuck cast
Ø 125 mm DIN 6350 A2-3
-SINUMERIC 808D ADVANCED
-central lubrication
-Reference switch
-Maintenance-friendly protective housing
-Rear access flap for maintenance
Bmpwoe3aey
-safety switch on the front sliding door
-turret is located behind the turning centre (left-hand turning tool)
-Linear guidance
chuck 180 mm
Bg8lexx0ru
number of tools max. 6
magazine inkl.
weight of the machine ca. 2 t
Technische Details Please See the attachment Document !!!
Technische Details Bitte siehe Anhang Dokument !!!
Jwexbq
Modernisierung und Überholung. 2013
Modernization and overhaul 2013
Vertical turning lathe SC22/27 CNCretrofitted and upgraded with CNC FANUC IN 2021
Technical parameters:
maximum machining diameter 2700mm
table diameter 2000mm
maximum height of work piece 1900mm
work piece maximum weight 15.000 Kg
table revolution range 2,22-112 rot.min
work feeds range 5-3000 mm/rot
rapid feed 4000 mm/min
main motor power 60 Kw
LxWxH 4800x4800x5000mm
machine weight 38850Kg
Bw3nyk9i9h
The machine is completely retrofitted.
All components are new: electric and electronic equip...
CNC lathe
Length of the machine bed / Length of bed: 250 mm
Travel in x / Way in x: 80 mm
Travel in y / Way in y: 250 mm
Mu7tdo
spindle hole / spindle hole: 21 mm
spindle speed / spindlespeed: 50 - 2250 rpm
Spindle power / spindle power: 1.1 kW
Tool holder with 4 stations electrically adjustable / Tool holder with 4 stations adjustable electrically
Spindle cone: MT 4
Tailstock cone / tailstock cone: MT 2
Tailstock diameter / Tailstock diameter: 22 mm
tailstock adjustable / tailstock adjustable: ...
Cycle turning machine make TOS Galanta type Zyklotronik HAD 40 / 75
Machine # 400507596001 Year of construction 1996
Technical data:
turning length 750 mm
centre height 230 mm
Swing over bed 400 mm
Swing over cross slide 230 mm
Swing diameter in the crank 460 mm
Rd77dh3gb
spindle mounting DIN 52027 / B 6 Camlock
spindle bore 50,8 mm
Speed range 20 - 3500 rpm
Feed rate 0,001 - 9999 mm/min.
rapid traverse 6,0 / 3,0 m/min.
Drive power / connected load 7.5 kW / 13 kVA
weight approx. 1760 kg
outside ...
CNC Lathe STYLE 510
Producer: Style CNC Machines
YP: 2010
control style
Turning diameter ... 510mm
Turning length ... 1350mm
Spindle bore ... 78mm
Turret head
Circumferential diameter over bed ... 510mm
Circumferential diameter over support ... 300mm
Tool turret ... 8/0
Machine weight ... 3250kg
L x W x H ... 3200x1800x1800mm
Bson0zqxal
The machine is in good condition and can be tested under power.
Cuadro CNC Fagor
Bkyo9jsoke
Technical data
CNC - lathe plan
Make ZERBST
Type DP 1
Year of construction 1989
Control Siemens 840 6 (2014)
Workspace
Centre distance feed machine without tailstock swing over bed 1,400 mm swing over bed slide 1.200 mm
Main drive
Power at 100% ED 55 kW
Main spindle
Diameter of front bearing 240 mm
Spindle bore 100 mm
Speed range 1 - 450 min-1
Max torque 25,000 nm
Transmission levels can be switched via M-function 4
Gear-unit stage 1 1 - 28 min-1
Gear-unit stage 2 3 - 71 min-1
Gear level 3 9 - 1...
Carbide CNC Wood Lathe Turning Cutters Bits Knife Tools
This CNC wood lathe turning tool is a new design carbide wood lathe cutter, it is used with CNC wood turning lathe machine, such as cnc auto motion, cosen cnc, Intorex, Unique CNC, StyleCNC, Laguna, etc, reduces the tool changing times greatly during one day working. This wood lathe knife eliminates the need for frequent sharpening which is very common in lathe turning woodworking. Improved the productivity, and reduce the production cost...
TAKISAWA EX - 110 CNC LATHE
MAKE TAKISAWA, MADE IN JAPAN
MODEL EX-110
CONTROL FANUC 21i TB
YEAR 2005
CHUCK SIZE 250.0 mm
BAR CAPACITY 75.0 mm
MAX CUTTING DIA 400.0 mm
MAX CUTTING LENGTH 710.0 mm
TRAVEL X -AXIS 220.0 mm
Bxcxd37qg3
Y -AXIS 710.0 mm
TURRET 12 STATIONS, BMT
SPINDLE NOSE A2-8
SPINDLE SPEED RANGE 3,500 RPM
SPINDLE MOTOR 18.5 kW
TAILSTOCK YES
PLUS
TOOL SETTING PROBE
SWARF CONVEYOR
TRANSFORMER
SET OF MANUALS
SPARE TOOLING
FULLY FUNCTIONAL
HAAS SL-10 CNC Lathe
Pke9d
Model: Sl-10
Serial Number: 3086011
Year: 2010
Swing over Bed: 413mm dia.
Max. Machining Dia.: 279mm
Max. Cutting Length: 356mm
Spindle Speeds: 6000 RPM
Machine with:
Tailstock
12 Station Turret
3 – jaw chuck
Parts Catcher
Tool Setter
510mm swing,
250mm max. machining diameter,
310mm max turned length,
6000rpm spindle,
Bxcrieyx2g
51mm bar capacity,
12 station turret,
6000 rpm milling speed
11kW spindle motor,
FANUC OiTC control,
c axis 0.001 degrees,
3 jaw chuck, Tool setter, Tailstock, Swarf Conveyor, Coolant, parts catcher, barfeed unit.
Dugard 52TTS 9-Axis Twin Spindle CNC Lathe (03/2012) with
Double Y Axes, Servo Angular Driven Tools. S/No.
Pkkw2
CY2010301 (2012) Max Turning Dia 52mm Bar Dia, Spindle
Speeds 6000rpm with C Axis, Sub Spindle 52mm, Subspindle
Speeds 6000rpm with C Axis, No. Of Axes 9, Driven Tools
Stations 18, CNC Control System Syntec PC Based Control
900TE with Mitsubishi Drives, Total Power HP/KW 15kw,
Electrics: 380-440/3/50, Overall Size: 5383 X 2145 X 2080mm,
Weight: 6 Tons, Equipment: Barload BSM 80 Bar Fe...
XYZ SLX 555 LATHE - 2012
CONTROL - PROTOTRAK SLX
Bxajuux7w7
3 JAW CHUCK
SWING - 560MM
SWING IN THE GAP - 780MM
SWING OVER THE CROSS-SLIDE - 350MM
BAR CAPACITY - 104MM
DISTANCE BETWEEN CENTERS - 1000MM
MAXIMUM CUTTING DIAMETER - 560MM
MAXIMUM CUTTING LENGTH - 1650MM
SPINDLE BORE - 104MM
SPINDLE MOTOR POWER - 11KW
SPINDLE NOSED - 1-11
SPINDLE SPEED - 1800RPM
THIS MACHINE CAN BE SEEN UNDER POWER AT OUR PREMISES IN TELFORD, SHROPSHIRE BY APPOINTMENT.
MACHINE WEIGHT - 3000KG
DELIVERY ...
15
Auction ended
Feeler FTC-30 CNC Lathe
Cnh9p3yg
Year 2006, Fanuc 0i-TC control
12" chuck, tailstock, swarf conveyor
580mm max swing, 670mm max turning length, 75mm bar capacity
Tooling, manuals
TAKISAWA TC - 1 CNC LATHE
MAKE TAKISAWA, MADE IN JAPAN
MODEL TC - 1,
CONTROL FANUC O-TC
YEAR 1996 (1992)
MAXIMUM SWING 400.0 mm
MAX TURNING DIAMETER 450.0 mm
MAX TURNING LENGTH 260.0 mm
MAX BETWEEN CENTRES 450.0 mm
Cftzp3z
TRAVEL X -AXIS 105.0 mm
Y -AXIS 315.0 mm
TURRET 8 STATIONS
SPINDLE BORE 45.0 mm
SPINDLE SPEED RANGE 45 - 4,500 RPM
TAILSTOCK NO
PLUS
VERY LOW HOURS
MECHANISED LOADING/UNLOADING ARM
PLENTY OF TOOLING
FULL SET OF MANUALS
Model: SQT-250M 1000L
Serial Number: 162257
Year: 2003
Control: Mazatrol PC FUSION
Swing over Bed: 525mm dia.
Max. Turning Dia.: 300mm
Turning Length: 1000mm
Spindle Speeds: 5000 RPM
Spindle Bore: 74mm
Machine with:
Driven Tools
3 – jaw chuck
‘C’ axis
Tailstock
Large selection of tooling
Bxedirc2la
FX4002 Filter Mist
Swarf Conveyor
Machine manuals
Control Fanuc 18I-TB,
bar capacity 32mm,
maximum cutting diameter 32mm,
Kgg89aw
maximum cutting length 80mm,
maximum drilling diameter 8mm,
maximum tapping capacity M6,
milling speed 5,000rpm,
spindle speed 7,000rpm,
Sub spindle C axis 0.001 degree,
FMB Turbo 3-36/3200 barfeed,
Max. Swing Over Bed: 370.84mm,Max. Distance Between Centers: 749.30mm,Max. Turning Diameter: 378.46mm,Max. Chucking Length: 347.98mm,Spindle Speeds: 40 - 4000 RPM,Spindle Motor (30 Min. / Continuous): 30 / 18.64 kw,Spindle Through Hole: 87.88mm,Subspindle Travel: 965.20mm,C-Axis Indexing: .001°,Rotary Tool Spindle Speed: 6,000 RPM,X-Axis Travel (Turret 1 / Turret 2): 279.40mm / 200.66mm,Y-Axis Travel (Turret 1 & Turret 2): +/- 71.12mm,Z-Axis Travel (Turret 1 & Turret 2): 960.12mm.
Pjlqn
EQUIPPE...
CNC turning lathe
Leadwell - F1
CNC Lathe Ø 446 x 420 mm with tailstock
MACH - ID 6686
Make: Leadwell
Type: F1
Control: Fanuc Oi Mate - TC
YOP: 2007
Bar feeder
Collet device with collets
Rapid feed 20.000 mm/Min
Max. turning Ø: 446mm
Z-Axis: 420mm
Spindle bore: 51mm
Bxfxe0jjvd
Speedrange: 4000Rpm
Spindle power: 11kW
Positions lower revolver:8
Length: 3.500 mm
Width: 1.800 mm
Height: 1.600 mm
Weight: 3.000 kg
Please Note: The information on this page has...
All available details
Model: CNC, Teach-in
Manufacturer: Cazeneuve
Type: :HC 575 Maxica
Control: NUM PLS+S 3
Center-distance: :2000mm
Bxekusgddy
Turning-diameter: :550mm
Spindle-diameter: 80mm
WASINO CNC Lathe
Type:LG81T
Year:1989
Control: FANUC O-T
Video available
Kka7ic
Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be ...
Model: SQT-18MS
S/no.: 107792-0
Control: Mazatrol T32-3
Swing over Bed: 522mm dia.
Swing over Carriage: 393mm dia.
Max. Machining dia.: 300mm
Distance Between spindles: 856mm
‘X’ axis stroke: 178mm
‘Z’ axis stroke: 568mm
Spindle Speeds: 35 – 4000 RPM
Spindle Bore: 75mm dia.
Bwywdblizw
Sub Spindle Speed: 180 – 4000 RPM
Machine with:
‘C’ axis
Driven Tools
Sub Spindle
12 station turret
Swing over bed 250mm,
swing over cross-slide 120mm,
bar capacity 42mm,
Ph0yn
spindle speed 7,000rpm,
sub-spindle speed 7,000rpm,
milling speed 6,000rpm,
12 station upper and lower turrets,
C axis 0.001 degrees,
Y axis movement 50mm,
Siemens 840D control, swarf conveyor and tooling
NAKAMURA TOME TMC-35 X CNC LATHE
MAKE NAKAMURA TOME, MADE IN JAPAN
MODEL TMC - 35 X
CONTROL FANUC OT
YEAR 1993
CHUCK SIZE 300 mm
SWING 620 mm
BETWEEN CENTRES 1000 mm
TURRET UPPER TURRET: 12 STATIONS
LOWER TURRET 8 STATIONS
PLUS
Rylbn88b
TAILSTOCK
SWARF CONVEYOR
MANUALS
turning diameter 360 mm
turning length 500 mm
control Fanuc 15 TF
swing diameter 380 mm
spindle head A5 DIN 55026
spindle bore 42 mm
spindle distance 6000 mm
drive of main spindle 15 kW
turret 12 station
tool taper VDI 30
axial and face feeds 10
rapid travel - longitudinal/face 10 m/min
reus 6000 U/min
Pg3pb
chip conveyor kW
coolant
total power requirement 20 kW
weight of the machine ca. 5 t
dimensions of the machine ca. 3100x2500x1750 m
- incl. chip conveyor
- incl. oil dust exhaust...
x-travel 580 mm
max. 500 mm
max. 4.000 U/Min
spindle bore 51 mm
Bwpvr9ponr
tail stock
total power requirement 14 kW
weight of the machine ca. 4,1 t
turning diameter:460 mm
turning length:1500 mm
centre height:230 mm
spindle bore:78 mm
bed width:400 mm
spindle speed::2200 U/min
spindle taper:D1-8 DIN 55029
Nb0w2
diameter of quill:95 mm
quill stroke:145 mm
CNC turning lathe
Bxad2snx9q
DOOSAN - PUMA 350
CNC Lathe Ø 480 x 1050 mm
MACH - ID 6683
Make: DOOSAN
Type: PUMA 350
Control: Fanuc 18-T
YOP: 1998
Max. turning Ø:700mm
X-Axis: 362mm
Z-Axis: 1.105mm
Spindle bore: 91mm
Speedrange: 3500Rpm
Spindle power: 26kW
ATC / revolver:12
Chip conveyor: Yes
Pinole taper: 6Mk
Stroke pinole: 200mm
Quill Ø: 85mm
Length: 4.000 mm
Width: 2.400 mm
Height: 2.300 mm
Weight: 8.200 kg
Please Note: The information on this page has b...
Maximum machining diameter 300mm Dia.
Swing 500mm,
65mm Dia. Bar Capacity,
C axis and Milling,
4000rpm,
12 Station Turret,
210mm Dia. Power Chuck, 22kW Spindle Motor, Tool Setter, Mazatrol FUSION Control, Sub Spindle, swarf conveyor.
Phu2b
CNC lathe, lathe, cycle lathe, universal lathe, cycle-controlled lathe, cycle lathe
Bexx8ilnfa
Year of construction: 1997
-Control: Grundig Manual Plus V360
-Turning length: 675 mm
- Turning O over bed: 380 mm
-Turning O over support: 150 mm
-Spindle bore: O 50 mm
-Spindle speeds: 330-4000 rpm
- Wedge bar chuck Schunk: 205 mm Type: ROTA-S plus
-Multifix steel holder
- Bezel: max. 210 mm
-Take tailstock: MK4
-Drive motor: 7.5 / 11 kW
-Dimensions: 3500/1400 / H1840 mm
-Weight: 2050 ...
turning diameter:660 mm
turning length:545 mm
control:INDEX C 200
turning diameter over bed slide:425
spindle bore diameter:100 mm
spindle turning speed range:10 - 2800 U/min
rapid traverse speed:10000 mm/min
spindle drive:53 kW
total power requirement:65 kW
weight of the machine ca.:8 t
dimensions of the machine ca.:4,8 x 3 x 2,45 m
Bumopf2z
CNC control INDEX C 200
Chucker with 3-jaw 400 mm power chuck
12-fold revolving head with 50 mm shaft arbor
chip conveyor, oil mist exhauster, misc. to...
control Fanuc OT
150 - 200 mm
D8gebnx
chuck 140 mm
number of tools max. 6
load magazine
weight of the machine ca. 2 t
turning diameter:554 mm
turning length:2000 mm
centre height:277 mm
spindle bore:104 mm
bed width:400 mm
spindle speed::2000 U/min
spindle taper:D1-11 DIN 55029
diameter of quill:95 mm
quill stroke:145 mm
Pdbez
turning diameter 260 mm
turning length 500 mm
control Mazatrol Cam T-2
swing dia. 440 mm
turning speed range 36 - 3600 U/min
spindle nose A2 - 6 Zoll
spindle bore 56 mm
range L-W-H ca. 2550 x 1500 x 1750 mm
weight ca. 2900 kg
total power requirement 31 kW
without chuck, without tools
Machine was in use until dismantling
Tool turret standard: 8-fold
Bxan0yjbm9
ideal as spare part carrier
279mm max. machining diameter,
356mm cutting length,
6000rpm spindle,
413mm swing,
Xb8brp9d
44mm bar capacity,
12 station turret,
11.2kW spindle motor, HAAS control, 3 jaw chuck, parts catcher, , tool setter, manuals, coolant
Ref. -No.: 10154
Brand: HEYLIGENSTAEDT
Retrofit: 2015
Type of control: CNC
Control: SINUMERIK 840D solution line
Storage location: Mülheim an der Ruhr
Nsnpe2bv
Country of origin: Deutschland
Machine-No.: 187073/Ü-62114
Bed width: 2000 mm
Feed rate: 1-5000 mm / min
Turning Diameter: 2600 mm
Turning Length: 10000 mm
Faceplate Diameter: 2000 mm
Spindle Speeds: 0,5 – 36 min-1 / 20 – 140 min-1 RPM
Max. Torque: 120 Nm
Max. Workpiece Weight: 40000 (Walze stabil bis 70000) kg
Total Power Requirement: 2...
turning diameter 805 mm
turning length 2000 mm
control FAGOR 8055i FL-TC
bed width 475 mm
centre height 400 mm
max. swing diameter over bed 805 mm
swing diameter over slide guides max 720 mm
max. turning dia. over cross-slide 515 mm
x-axis 400 mm
rapid traverse X-axis 10 m/min
rapid traverse Z-axis 10 m/min
spindle nose ASA A2-8
spindle passage 105 mm
tail stock
diameter of quill 106 mm
tailstock quill stroke 215 mm
tailstock quill taper MT 6
Tool turret 1
Numbers of tools 8
tool taper VD...
chuck 120 mm
circulation diameter max. 220 mm
Bgxpol8nyo
changer 6 Plätze
tail stock ja
weight of the machine ca. 1,5 t
Control
turning diameter 460 mm
turning length 1500 mm
control Fanuc
turning diameter over bed slide 270 mm
greates pass round over bed 460 mm
max. swing-dia. in gap Ø 730 x 213 mm
spindle bore diameter 76 mm
turning speed range 155- 2000 U/min
rapid speed 3 m/min
number of tapers in turret head 4 RD 2 PARAT
Uw9ngia
tail stock Ja MK
power requirement 11/7,5 kW
weight of the machine ca. 2,9 t
dimensions 3,2 x 1,65 x 1,72 m
Cycle-CNC-Lathe in good condition.
Equipment:
- Coolantsystem
- PARAT toolho...
Gildemeister CTX 400
Gxqavw
Control EPL 2
Year of manufacture 1991
technical data:
turning diameter: 290 mm
turning length: 600 mm
spindle bore: 72 mm
number of tool places: 12
cross slide path: 212 mm
Longitudinal slide path: 640 mm
speed range: 25-5000 rpm
drive power: 22 kW
weight approx.: 5,2 t
Mass approx.: 4,5 x 2,0 x 1,9 m
accessories:
Chip conveyor
tailstock
preparation steady rest
Tool holder package
Documentation
Errors in technical data and subject to prior sale.
850mm Swing,
525mm Max Cutting Diameter,
790mm max turning length,
10 Station Turret,
102mm bar capacity,
2800rpm
22kW Spindle,
Fanuc 0i-T,
Tool setter, 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor,
Bwlb8tuaki
6
12.500 €
Bidding plus VAT
18 days left
18 days left
turning diameter 680 mm, max. turning length 3000 mm, max. spindle rotation: 1800 UPM, with CNC control, make FANUC, type: GE FANUC SERIES 21iT-TB, three-jaw chuck, make Röhm, coolant device, chip conveyor, make Kabelschlepp, own weight: 6300 kg
Jw3ucy
turning diameter:480 mm
turning length:925 mm
control:Bosch CC 300
total power requirement:32 kW
7pclzsm
weight of the machine ca.:4 t
dimensions of the machine ca.:3,35 x 1,8 x 1,99 m
INDEX 4 Axis CNC Lathe
Model : G400
Gfyrhp9
Capacity 700ø
Distance between centres 1400mm
Year 2002
Order : SIMENS
Tailstock
