Used cNC lathes up to 199mm turning diameter for sale (269)

Condition: repair required (used), Year of construction: 2024, functionality: unexamined, machine/vehicle number: P20750, CNC machine / Swiss-type automatic lathe with control system Model: M16-4M5 / CINCOM LFV Technology / Mitsubishi Control M730LPC-4VS (see attached PDF for more information) - Year of manufacture: 2024 Hfedpsynhz Rjfx Aaljd - Serial no.: P20750 Damages (drop damage) - see photos - During installation work, the CNC lathe fell from the transport pallet when using a pallet truck and toppled onto the factory yard paving, rotating by 90°. The machine was subsequently recovered and set upright. According to the documented and traceable incident, mechanical damage was observed on the front side of the machine, including deformations, dents, distortion, scoring, as well as scratches and abrasion marks. The visible damages affected various cover panels as well as the door/door handle to the interior. No further damages were apparent in the demonstrated condition, but additional defects cannot be ruled out due to the nature of the incident. Damage to the machine bed, the control system, the drive, and the different axes of the turning unit is possible. Therefore, in addition to the described visually apparent damages, other hidden or functional defects cannot be excluded. The sale is made without warranty or guarantee.

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 Dsl - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl - Celos Turning diam. : 140 mm Turning length : 235 mm In General: Year of manufacture:2022 Control system:Siemens 840 Dsl -CELOS Turning diameter:140 mm Turning length:253 mm Bar capacity:50 mm Main spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001°Chuck Sub spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001° Chuck:Hainbuch clamping top Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:240 mm Y-axis:70 mm (+/- 35 mm) Z-axis:350 mm Hfedpjykxmiefx Aaljd Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:125 mm Y-axis:70 mm (+/- 35 mm) Z-axis:380 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system incl. temperature control Bar loader:Top Automazioni Parts removal:Parts gripper + cycle belt Tailstock:Below counter spindle Chuck:2x Hainbuch clamping top Tool holders:Various driven and static holders

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Hfedpevyli Esfx Aalod Accessories: # Various tool holders: 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: good (used), Year of construction: 2008, functionality: fully functional, - Control: Sinumerik (Index C200-4D) - Bar capacity: 65 mm - Spindle speed: 5,000 rpm - Turret 1 with 8 stations (all driven), incl. synchronous spindle - Turret 2 with 6 stations (all driven) - Travel range Turret 1/2: X1= 90, Z1= 290 mm X2= 81, Z2= 80 mm - Rear-side machining 5 rear drilling stations - C axis - Chip conveyor Machine weight approx. 3,000 kg Floor space including control cabinet and chip conveyor: LxWxH: 3,430 x 1,240 x 1,750 mm Bar feeder: INDEX MBL Hfjdpfeyb Ndyox Aaljd Weight: approx. 2,000 kg Dimensions LxWxH: 4,500x1,100x1,500 mm

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Hedpfx Aaox I Rtkolofd Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: used, Year of construction: 2003, control 840D-PCU 50 V1 3 coolant ja chip conveyor ja kW generator - rated current 110 A Hsdpfx Aoqn A Rrsalefd connected load 56 kW

Condition: excellent (used), functionality: fully functional, Weiler Primus lathe in excellent condition. Can be inspected under power. Technical data: Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Hsdex Htf Hepfx Aalofd Spindle speed: 30 – 3000 rpm Tailstock: MK 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1550 mm Price reduced!

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 42 [mm] - Travel : 100 [mm] - Spindle speeds : 6000 [rpm] - Spindle power : 7.5/5.5 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 34 [mm] - Spindle speeds : 5000 [rpm] - Spindle power : 5.5/3.7 [kW] - C axis indexing precision : 0.001 [°] Hfodpfx Aaouhad Ujlod - Number of turrets : 2 UPPER TURRET - Number of positions : 8 - X stroke : 140 [mm] - Z stroke : 235 [mm] - Y stroke : 70 (+/-35) [mm] - Live tools speed : 5000 [rpm] - Live tools power : 1.0 [kW] LOWER TURRET - Number of positions : 6 - X/Z stroke : 140 / 310 [mm] POWER SUPPLY - Total installed power : 30 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.220 x 1.460 [mm] - Machine height : 1.700 [mm] - Machine weight : 3100 [kg] MACHINE HOURS - Number of working hours : 14072 [h] EQUIPMENT - CNC : Fanuc Oi-TD - Parts conveying strip - Ejection of workpiece - Chips conveyor - Predisposition for barfeeder - Electric transformer - Collets collection for guide bush

Condition: excellent (used), Weiler Primus VC Precision Centre Lathe Equipped with 3-axis HEIDENHAIN digital readout (latest generation) With VC drive for stepless speed adjustment and CE-compliant, in virtually as-new geometric condition Technical Data: Year of manufacture: 1999 Machine No. 208 Centre height: 140 mm Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4,000 rpm, stepless Main drive: approx. 4 kW Spindle bore: 40 mm Short taper spindle nose DIN 55027 size 5 with bayonet locking Tailstock: MT 3 Quill stroke: 40 mm Longitudinal feed: 0.02 to 0.63 mm/rev Cross feed: 0.005 to 0.2 mm/rev Metric thread pitches: 0.25 to 8 mm Module pitches: 0.2 – 4 mm (19 pitches) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Hfedpfx Aoyglk Hoaljd Accessories and Equipment: - 3-Axis HEIDENHAIN digital readout (latest generation) - Display for spindle speed - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post, size “A” - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard - Simple bed stop - Switchable spindle brake - Operating manual - Machine lamp The machine comes from a vocational school and is in exceptionally top condition. Thanks to its safety features and renowned WEILER precision, this lathe is ideal for training as well as tool and machine construction. Note to all private buyers: The price of the machine is well into the five-digit range.

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE Hodpfxev I Tx Ro Aalefd MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS CNC SHORT MAGAZINE BARFEED TURRET TOOLING SWARF CONVEYOR MANUALS

Condition: used, MURATEC WIEDEMANN MOTORUM 2048 CNC TURRET PUNCH MACHINE MAKE MURATA WIEDEMANN, MADE IN JAPAN MODEL MOTORUM 2048 CONTROL FANUC 30i TOUCH SCREEN Hfedpfx Ajxvch Tealsd YEAR 2016 CAPACITY 20 TONS SHEET SIZE (WITH ONE REPOSITIONING) 1250mm x 2500mm SHEET THICKNESS MAX. 6.35 mm Y, X STOKE Y AXIS: 1360.0 mm X AXIS: 2550.0 mm PUNCHING ACCURACY +- 0.1mm THROAT DEPTH 1340.0 mm MAX ALLOWABLE SHEET WEIGHT 150 KG HIT RATE 1.0T 25 mm PITCH 8.3 mm stroke: 355 HPM 0.5 mm PITCH 1.4 mm stroke: 900 HPM SIMULTANEOUS AXIS SPEED 125 m/MIN PUNCHING ACCURACY +- 0.1 mm TURRET INDEX SPEED 35 RPM COMPRESSED AIR QUANITY: 100NL/MIN PRSSURE: 0.5 MPa POWER SUPPLY 19 kVA PLUS GOOD SET OF TOOLING ONE OWNER FROM NEW VERY LESS HOURS SAFETY GUARDS

Condition: used, Year of construction: 2011, turning diameter: 170 mm, spindle bore: 42 mm, CNC Lathe with 2nd Spindle, 2 turrets and Y-axis (7-axis) Control: Fanuc 31i-A Turning diameter: 170 mm Turning length: 503 mm Spindlebore diameter: 42 mm Spindle Nose: A2-5 Spindle nose sub-spindle: A2-5 Spindle (left) speed 6.000 1/min Spindle (right) speed 6.000 1/min Movement X-axis: X1: 135 / X2: 135 mm Hedsx N S Hzjpfx Aaljfd Movement Y-axis: +/- 31 mm Movement Z-axis: Z1: 503 / Z2: 503 mm Min indexing C-axis right spindle 0,001 ° Min indexing C-axis left spindle 0,001 ° Number of tools on turret 2x12 Tool Type: BMT 44 Bar Feeder: Iemca Boss 525E (Year 2011) Machine weight: 5,650 kg. If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2016, operating hours: 13,953 h, Manufacturer: WEILER | Model: DZ 40 / ARY | Serial Number: LI 01 | Year of Manufacture: 2016 | Max. swing diameter: 560 mm; X travel: 200 mm; Z travel: 350 mm; Turning length (chuck to center): 300 mm; Spindle head according to DIN 55026/A, size 5; Chuck size: 160 mm; Material passage in pull/push tube: 42 mm; Spindle bore: 52 mm; Max. speed: 6300 rpm; Siemens Sinumerik 840D Solution Line CNC control in basic version; Accessories in the two cabinets; Dimensions: approx. 2000 mm x 2300 mm x 3300 mm (W x H x L); approx. 5000 kg; The indicated dimensions are approximate values. All other information without guarantee. | Grey | Steel Hfjdjyidbgspfx Aalsd

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Index G42 lathe with 3m bar feeder, fully functional. Max. bar diameter: 42mm. The machine is equipped with an automatic bar catcher. Includes chip conveyor and coolant tank. Turret VDI30 without driven tool stations. With internal coolant supply. The machine is being sold due to the operator's retirement. A wide range of accessories is included, such as bar guide bushings, collets, etc. – see pictures. Machine manuals and documentation are available. The machine is ready for collection from our facility. Hjdpfox Nbk Nox Aalefd

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning length: 320 mm, turning diameter: 32 mm, Bar capacity: 32 mm Working length with rotary guide bushing/without guide bushing: 320/70 mm Drilling capacity: 10 mm Tapping capacity: M10 Rear spindle speed: 200-8000 rpm Spindle speed rotary guide bushing: 200-8000 rpm Tool spindle speed: 200-6000 rpm Total number of tools: 31 positions Number of controlled axes: 6 pcs Rapid traverse: 32 m/min, X1, Y1 & Y2 24 m/min Main spindle motor: 3.7/5.5 kW Hfodpsylwrmsfx Aaled Rear spindle motor: 2.2/3.7 kW Tool spindle motor: 1 kW Rotary guide bushing motor: 1.5/3.0 kW Power requirement: 21.4 kVA Year of manufacture: 2015 Length: 2150 mm Width: 1280 mm Height: 1930 mm Weight: 3500 kg LNS Sprint 565 bar feeder

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Hfodswym Nfepfx Aaljd MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, Year of construction: 2008, Wagner WDE500 Lathe, Year 2008 Used lathe from Wagner Wagner WDE 500 cycle-controlled lathe Only approx. 1,700 operating hours Turning diameter: 500 mm Turning length: 1,500 mm Control: Siemens 802 C Swing diameter over cross slide: 280 mm Spindle bore diameter: 82 mm Number of controlled axes: 2 Speed range: 20-3,000 rpm Rapid traverse speed: 5 m/min Number of tool stations in turret: 1 Multifix "C" Tailstock: Yes, MT 5 Drive power: 7.5 kW Machine weight: approx. 3.0 t Dimensions (L x W x H): 3.3 x 1.7 x 1.7 m Cycle-controlled CNC lathe in good condition. Accessories: - Coolant system - Base holder - 3-jaw chuck - Various PARAT tool holders Hfedoxlz Rxopfx Aaled With original operating manual Fully functional, good condition as shown in the photos Viewing, collection and delivery available for a fee

Condition: good (used), Year of construction: 2008, operating hours: 7,906 h, functionality: fully functional, turning diameter: 85 mm, spindle bore: 25 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 60 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, total height: 1,900 mm, total length: 1,700 mm, total width: 1,300 mm, overall weight: 1,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E25 Condition: Very well maintained, fully functional Location: Graz Operating hours: approx. 7906h Year of manufacture: 2008 Images: Original images will be provided upon request Technical data: Working area: X-axis travel: 100 mm Z-axis travel: 300 mm C-axis: Resolution 0.001° Bar feeder: Compact Load E45 Turret: VDI 16, 6 driven positions Turning diameter: Ø 85 mm Swing diameter: 225 mm Spindle bore: Ø 25.5 mm Speed: Minimum: 60 rpm Maximum: 6300 rpm Number of tool changer stations: 12 Coolant pump: Yes Machine weight: 1400 kg Dimensions: Length: 1700 mm Width: 1300 mm Hfjdsypcydepfx Aalod Height: 1900 mm Contact: Please feel free to contact us to schedule a viewing appointment or to receive an offer!

Condition: good (used), Year of construction: 2000, Radial drilling machine WEILER VO 75, no. 146382062, year of manufacture 2000, outreach approx. 200 cm, with 2 large clamping cubes. Hfjdoyhqngepfx Aalsd

Condition: good (used), Year of construction: 2018, operating hours: 33,361 h, functionality: fully functional, bar diameter (max.): 65 mm, Equipment: documentation/manual, Miyano ABX64YY with IEMCA bar feeder Hfedpfx Asydr H Noaled Since 2021, the machine has operated with cutting oil. For sale is a powerful and reliable CNC turning center from the premium manufacturer Miyano, model ABX64YY. The machine is offered as a package together with a high-quality IEMCA bar feeder. Suitable for high-precision series production and is in immediately operational condition. An inspection under power is, of course, possible and encouraged by prior appointment. Please contact us if you have serious interest.

Condition: good (used), Year of construction: 2008, Weiler DZ 40, year of manufacture 2008, Siemens 840 D control, travel X/Z 200/350 mm, turning diameter 180 mm, max. swing diameter 560 mm, Y axis +/- 25 mm, Q axis / programmable tailstock, Q axis travel 360 mm, Q axis measuring system rotary, tailstock MK 4, main spindle max. bar capacity 42 mm, spindle bore 52 mm, rapid traverse X/Z/Q 30/30/20 m/min, turret 16 stations – all driven, VDI 25, shank diameter 25 mm, driven tools up to 4,500 rpm, part catcher, accessories, driven tool holders, fixed holders. Hfodjydvfpjpfx Aaljd

Condition: used, Year of construction: 2008, MURATEC - MW 120 - 2008 Hfedpfoyt Rr Aox Aalsd - 2-4 pcs - disconnected but can be reconnected - complete machines with all periferies - can be tested upon agreement

Condition: new, Year of construction: 2015, 2-spindle 2-turret machine, max. spindle speed 6000 RPM, with feeder (vibrational bowl), robot handling unit and post-process measurement unit. Control system Fanuc. Dimensions 2400 x 1650 x 1790 mm ( main unit ). SALE IN EU / SWITZERLAND / UK ONLY. Hsdpfx Aaolgy U Eelofd

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 352 mm, travel distance Z-axis: 250 mm, rotational speed (max.): 5,000 rpm, controller model: Fanuc Series 0i Mate-TD, Equipment: chip conveyor, TECHNICAL DETAILS Turning diameter over tool carrier: 70 mm Travel X-axis: 352 mm Travel Z-axis: 250 mm Hfsdpfjx E Uzmex Aalsd Tool stations: 8 Bar capacity: 42 mm Max. spindle speed: 5,000 rpm MACHINE DETAILS Control: Fanuc Series 0i Mate-TD EQUIPMENT Machine documentation Power chuck D135 mm Collet chuck 173E Parts catcher Chip conveyor

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder Hfedpfx Aajwrp Dpoljd - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg